The system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation.   JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz S / N Ratio > 105dB T.H.D <0.6% @ 1KHz Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED BAR), RF Meter (LED BAR) , Battery Status Controls  Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level -12dB AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Operation Voltage 100 ~ 240V Output Connector 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region. 

Read more less

R-4 Receiver 1 x R 4 dual quad channel rackmount receiver. 4 x Transmitters JSS-4B Hand Held 1 x 4U Shallow flight case 1 x 2U lockable rack drawer 1 x RTF UF 20 Rear to Front antenna kit Internal link cables for main and RF distribution Pre Built and tuned by expert engineer JSS-4B Microphone 2400 to 3000 selectable frequencies Preset 15 groups each of up to 63 compatible channels Phase-Locked Loop (PLL) synthesized tune Extended dynamic range and smooth frequency response. Adjustable transmission power between Low and High The panel Lock-On function prevents tampering and RF interruption Together with JTS various capsules preferred miking is assured. The JSS-4B is a handheld microphone fitted with a JTS SAM-8WLN Dynamic Capsule. It is designed with a slot-in charging feature when fitted with two AA NiMH rechargeable batteries.

Read more less

R-4 Receiver 1 x R 4 dual quad channel rackmount receiver. 4 x Transmitters JSS-4B Hand Held 1 x 4U Shallow flight case 1 x 2U lockable rack drawer 1 x RTF UF 20 Rear to Front antenna kit Internal link cables for main and RF distribution Pre Built and tuned by expert engineer R-4TBM - All Metal Features: * 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Extended dynamic range and smooth frequency response. * Adjustable transmission power between Low and High * The panel Lock-On function prevents tampering and RF interruption * Together with JTS various music instrument mics, headset mics and tie clip mics this bodypack is versatile for all applications.   JSS-4B Microphone 2400 to 3000 selectable frequencies Preset 15 groups each of up to 63 compatible channels Phase-Locked Loop (PLL) synthesized tune Extended dynamic range and smooth frequency response. Adjustable transmission power between Low and High The panel Lock-On function prevents tampering and RF interruption Together with JTS various capsules preferred miking is assured. The JSS-4B is a handheld microphone fitted with a JTS SAM-8WLN Dynamic Capsule. It is designed with a slot-in charging feature when fitted with two AA NiMH rechargeable batteries.

Read more less

The JTS R-4-RACK-4TB is a 19” rack/flight case featuring an R-4 UHF PLL Quad channel diversity wireless receiver, four R-4TBM bodypack transmitters and a 2U rack draw. The receiver features REMOSET which enables the transmitters and receiver to wirelessly sync frequencies in under a second with the push of a button. The antenna outputs and AC can be cascaded to enable multiple receivers to be connected together. This system also features four JTS R-4TBM bodypack transmitters featuring adjustable RF output, aluminium alloy chassis and a large LCD display screen showing low battery and user name. REMOSET ID Pairing is also built into this device for easy pairing with the R-4 receiver. The heavy-duty rack provides protection of the complete system during transit. Please Note. This system is available in two frequency bands: 606.5-638MHz includes Channel 38 and is the most reliable solution for portable wireless microphone systems in the UK and requires a licence (www.ofcom.org.uk). 823-865MHz includes Channel 70 (863-865MHz) which can be operated licence-free in the UK and Europe. Features 19” flight case to store and protect system Integrated storage drawer Suitable as a portable system REMOSET synchronisation Pilot tone and noise mute Integrated antenna distribution 4 Independent XLR outputs and 1 XLR for mixed output Delivery Includes 1 R-4 diversity receiver   4 R-4TBM bodypack transmitters 1 flight case Technical Data R-4 diversity receiver Frequency Preparation: PLL Synthesized Control Carrier Frequency Range: UHF 823-865MHz (CH70 863-865MHz licence free)/ 606.5-642 MHz (CH38 606-614 MHz licence required) S / N Ratio: > 105dB T.H.D:    <0.6% @ 1KHz Display Contents: Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED BAR), RF Meter (LED BAR), Battery Status Controls: Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level: -12dB AF Output Impedance: 600? Squelch: Pilot Tone & Noise Mute Operation Voltage: 100 ~ 240V Output Connector: 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output Dimension (WxHxD): 212.3 x 38.3 x 144mm R-4TBM bodypack transmitter Frequency Preparation: PLL Synthesized Control Carrier Frequency Range: UHF 823-865MHz (CH70 863-865MHz licence free)/ 606.5-642 MHz (CH38 606-614 MHz licence required) RF Outputs: Low / High Stability: < ±10KHz Frequency Deviation: ± 48KHz (Peak) Chassis: Aluminium alloy LCD Display: Group, Channel, Frequency, Battery Status, User Name, GAIN Adjust Controls: Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Input Connector: 4P Mini XLR Spurious Emissions: <-50 dBC Audio Frequency Response: 50Hz ~ 18k Hz Battery: UM3, AA x2 Dimensions (WxHxD): 62 x 80.3 x 22.6mm   Weight: 93g

Read more less

Features: * 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Extended dynamic range and smooth frequency response. * Adjustable transmission power between Low and High * The panel Lock-On function prevents tampering and RF interruption * Together with JTS various music instrument mics, headset mics and tie clip mics this bodypack is versatile for all applications. Specifications: Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 506-542 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ± 48KHz (Peak) Chassis Aluminium alloy LCD Display Group, Channel, Frequency, Battery Status, User Name , GAIN Adjust Controls Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Output Connector 4P Mini XLR Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18k Hz Battery UM3, AA x2 Dimensions 62mm (W) x80.3mm (H) x22.6mm (D) Weight 93g Notes Actual product specifications may vary depending on model and region.

Read more less

The R-4 system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation. JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance.   R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation. JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz S/N Ratio > 105dB T.H.D <0.6% @ 1KHz Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED BAR), RF Meter (LED BAR) , Battery Status Controls  Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level -12dB AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Operation Voltage 100 ~ 240V Output Connector 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region. 

Read more less

* 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Adjustable transmission power between Low and High NEWEST FEATURE: * It is designed with slot-in charging feature with two AA NiMH rechargeable batteries.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ±48KHz (Peak) LCD Display Group, Channel, Frequency, Battery Status, User Name, GAIN Adjust Controls Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18kHz Battery UM3, AA x2 Capsules Module  Interchangeable Dimensions 50(W) x 253(H) x 35.5(D) Weight 350g Notes Actual product specifications may vary depending on model and region   R-4TB * 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Extended dynamic range and smooth frequency response. * Adjustable transmission power between Low and High * The panel Lock-On function prevents tampering and RF interruption * Together with JTS various music instrument mics, headset mics and tie clip mics this bodypack is versatile for all applications. NEWEST FEATURE: * It is designed with slot-in charging feature with two AA NiMH rechargeable batteries.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ± 48KHz (Peak) Chassis Plastic LCD Display Group, Channel, Frequency, Battery Status, User Name , GAIN Adjust  Controls Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Output Connector 4P Mini XLR Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18k Hz Battery UM3, AA x2 Dimensions 62.3mm (W) x97.5mm (H) x20mm (D)  Weight 75g Notes Actual product specifications may vary depending on model and region.  CM-501 * Uni-direction for high-quality voice pick-up. * Wide dynamic range and frequency response for excellent sound reinforcement. * Small size for minimum visibility. * Together with clip for easy attaching to a tie, lapel, dress etc.   Connector 4P Mini XLR Frequency Response 100~15,000 Hz Polar Pattern Cardioid Sensitivity (at 1KHz) -60±3 dB* (1mV)*0dB=1V/?bar Impedance 2.2k? Max. SPL for 1% THD 130dB  Dimension(mm) Ø10.1mm(W)*  26.4mm(H) Net Weight 21.5g

Read more less

The system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation. JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ±48KHz (Peak) Chassis Plastic (R-4TH) / Aluminium alloy (R-4THA) LCD Display Group, Channel, Frequency, Battery Status, User Name, GAIN Adjust Controls Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18kHz Battery UM3, AA x2 Capsules Module  Interchangeable Dimensions 50(W) x 253(H) x 35.5(D) Weight 350g Notes Actual product specifications may vary depending on model and region.

Read more less

R-4TB * 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Extended dynamic range and smooth frequency response. * Adjustable transmission power between Low and High * The panel Lock-On function prevents tampering and RF interruption * Together with JTS various music instrument mics, headset mics and tie clip mics this bodypack is versatile for all applications. NEWEST FEATURE: * It is designed with slot-in charging feature with two AA NiMH rechargeable batteries.   CM-501 * Uni-direction for high-quality voice pick-up. * Wide dynamic range and frequency response for excellent sound reinforcement. * Small size for minimum visibility. * Together with clip for easy attaching to a tie, lapel, dress etc.

Read more less

R-4TBM * 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Extended dynamic range and smooth frequency response. * Adjustable transmission power between Low and High * The panel Lock-On function prevents tampering and RF interruption * Together with JTS various music instrument mics, headset mics and tie clip mics this bodypack is versatile for all applications.   CM-501 * Uni-direction for high-quality voice pick-up. * Wide dynamic range and frequency response for excellent sound reinforcement. * Small size for minimum visibility. * Together with clip for easy attaching to a tie, lapel, dress etc.

Read more less

R-4TH * 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Adjustable transmission power between Low and High NEWEST FEATURE: * It is designed with slot-in charging feature with two AA NiMH rechargeable batteries.

Read more less

R-4THA * 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Adjustable transmission power between Low and High NEWEST FEATURE: * It is designed with slot-in charging feature with two AA NiMH rechargeable batteries.

Read more less

  * Adjustable transmission power between Low and High * The panel Lock-On function prevents tampering and RF interruption * Together with JTS various capsules preferred miking is assured. * With TC-22 true condenser capsule (option)   NEWEST FEATURE: * It is designed with slot-in charging feature with two AA NiMH rechargeable batteries.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ± 48KHz (Peak) Chassis Aluminium alloy LCD Display Group, Channel, Frequency, Battery Status, User Name , GAIN Adjust Controls Power ON/OFF, AF Level, Frequency (Up/ Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Output Connector 4P Mini XLR Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18k Hz Battery UM3, AA x2 Dimensions 50mm (W) x253mm (H) x35.5mm (D)  Weight 93g Notes Actual product specifications may vary depending on model and region. . The system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation.   JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz S/N Ratio > 105dB T.H.D <0.6% @ 1KHz Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED BAR), RF Meter (LED BAR) , Battery Status Controls  Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level -12dB AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Operation Voltage 100 ~ 240V Output Connector 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region. 

Read more less

Rack mount kit for JTS half rack wireless receivers and transmitters, such as US-901D, US-9001D, US-1000D, SIEM-111T, and CS-4. Receiver sits in centre of 19" space. See also JTS RTF-1 Rear to Front Antenna Kit below in Related Products.

Read more less

Features * BNC / BNC: 60cm * Compatible with all BNC type antenna. * Impedance: 50? * Included: 2 cables and 2 BNC-F / BNC-F adapters.

Read more less

The JTS RTF-2U Rear to Front Antenna Mounting Kit for JTS US-903DC/PRO is a rack mount kit for the JTS US-903D dual channel wideband true diversity receivers which includes a mounted BNC socket on the rack ear and connecting cable for the antenna input on the receiver. Sold with 2 rack ears, 2 BNC jacks and 2 40cm connecting cables.

Read more less

Features BNC antenna cable set For mounting antennas to the front panel of the UHF PLL wideband receiver UF-20R/5 or R-4/5 2 x 60 cm antenna cable with BNC plug and BNC inline jack

Read more less

Based on US-8001 successful experience, RU-8011 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.  

Read more less

Based on US-8001 successful experience, RU-8011 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960 MHz Frequency Setting REMOSET U Receiving Mode Antenna Diversity Bandwidth 36MHz S/N Ratio >105dB(A) T.H.D <0.6%@1KHz Sensitivity -95dBm,S/N>80dB Rejection Ratio >80 dB Frequency Response 60Hz~15KHz±2dB Antenna Type Fixed Antenna Antenna Booster Power None Display LCD Display Contents Group, Channel, Antenna A/B, Mute Display, AF Meter, RF Meter, Frequency Scan, Audio Level, Volume Controls Power ON/OFF, Group, Channel, Mute Display, Frequency Scan (ON/OFF), Key Lock, Volume, Output Attenuation (XLR) Audio Output Level Ref/ ±22.5KHz Dev@1KHz Tone ?6.3 Phone Jack/ -10dBV XLR Jack/ -4dBV(Line) ? -24dBV(MIC) Audio Output Impedance 600? Squelch Pilot Tone & Noise Mute Output Connector 1 independent balanced XLR and one Ø6.3mm unbalanced. Power Supply DC12~15V/300mA Dimension (mm) 212.3mm(W)* 38.3mm(H)* 144mm(D) Notes Acutal product specifications may vary depending on region    This innovative bodypack transmitter is designed with Power/Mute button only. All adjustments and settings are carried out at receiver side and the transmitter will be set by patent pending REMOSET U. The settings include Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes. This will save battery life and avoid over discharge. To cope with music instruments a pad of -20 dB is designed in this bodypack transmitter.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960MHz Frequency Setting REMOSET U(Receive) RF Outpus Low / High Stability <±10KHz@Fc Frequency Deviation ±48KHz Spurious Emissions <-50dBc Function Mute, Auto Power Off, Sensitivity Adjust, Low Battery Display LED Input Connector 4P Mini XR Controls Power, Mute Battery UM3, AA x2    * Uni-direction for high-quality voice pick-up. * Wide dynamic range and frequency response for excellent sound reinforcement. * Small size for minimum visibility. * Together with clip for easy attaching to a tie, lapel, dress etc.   Connector 4P Mini XLR Frequency Response 100~15,000 Hz Polar Pattern Cardioid Sensitivity (at 1KHz) -60±3 dB* (1mV)*0dB=1V/?bar Impedance 2.2k? Max. SPL for 1% THD 130dB  Dimension(mm) Ø10.1mm(W)*  26.4mm(H) Net Weight 21.5g

Read more less

Based on US-8001 successful experience, RU-8011 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   This innovative bodypack transmitter is designed with Power/Mute button only. All adjustments and settings are carried out at receiver side and the transmitter will be set by patent pending REMOSET U. The settings include Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes. This will save battery life and avoid over discharge. To cope with music instruments a pad of -20 dB is designed in this bodypack transmitter.   * Uni-direction for high-quality voice pick-up. * Excellent gain-before-feedback and noise isolation. * Lightweight benefits great freedom and mobility. * Ergonomic design ensures comfortable wearing

Read more less

Base on the successful experience of US-8001D, the RU-8011D is designed with JTS 2nd generation wireless technology. To cope with the squeezed radio spectrum, the system provides more compatible channels within limited bandwidth. The patent pending REMOSET sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960 MHz Frequency Setting REMOSET U Receiving Mode Antenna Diversity Bandwidth 36MHz S/N Ratio >105dB(A) T.H.D <0.6%@1KHz Sensitivity -95dBm,S/N>80dB Rejection Ratio >80 dB Frequency Response 60Hz~15KHz±2dB Antenna Type Fixed Antenna Antenna Booster Power None Display LCD Display Contents Group, Channel, Antenna A/B, Mute Display, AF Meter, RF Meter, Frequency Scan, Audio Level, Volume Controls Power ON/OFF, Group, Channel, Mute Display, Frequency Scan (ON/OFF), Key Lock, Volume, Output Attenuation (XLR) Audio Output Level Ref/ ±22.5KHz Dev@1KHz Tone ?6.3 Phone Jack/ -10dBV XLR Jack/ -4dBV(Line) ? -24dBV(MIC) Audio Output Impedance 600? Squelch Pilot Tone & Noise Mute Output Connector 1 independent balanced XLR and one Ø6.3mm unbalanced. Power Supply DC12~15V/300mA Dimension (mm) 212.3mm(W)* 38.3mm(H)* 144mm(D) Notes Acutal product specifications may vary depending on region   Based on US-8001 successful experience, RU-8011 is designed with JTS 2nd generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The patent pending REMOSET U sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option. 

Read more less

Based on US-8001 successful experience RU-8012 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960 MHz Frequency Setting Ultrasonic / REMOSET (Transmit) Receiving Mode Antenna Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6%@1KHz Sensitivity -95dBm,S/N>80dB Rejection Ratio >80 dB Frequency Response 50Hz~16KHz±2dB Antenna Type BNC Socket Antenna Booster Power DC12~15V/100mA Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter, RF Meter, Battery Status Display LCD Controls Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level Ref/ ±22.5KHz Dev@1KHz Tone ?6.3 Phone Jack/ -10dBV XLR Jack/ -4dBV(Line) . -24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone, Noise and Mute Output Connector 2 independent balanced XLR and 2 Ø6.3mm unbalanced. Power Supply DC12~15V/500mA Dimension(m/m) 212.3mm(W)* 38.3mm(H)* 144mm(D)

Read more less

Based on US-8001 successful experience RU-8012 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960 MHz Frequency Setting Ultrasonic / REMOSET (Transmit) Receiving Mode Antenna Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6%@1KHz Sensitivity -95dBm,S/N>80dB Rejection Ratio >80 dB Frequency Response 50Hz~16KHz±2dB Antenna Type BNC Socket Antenna Booster Power DC12~15V/100mA Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter, RF Meter, Battery Status Display LCD Controls Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level Ref/ ±22.5KHz Dev@1KHz Tone ?6.3 Phone Jack/ -10dBV XLR Jack/ -4dBV(Line) . -24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone, Noise and Mute Output Connector 2 independent balanced XLR and 2 Ø6.3mm unbalanced. Power Supply DC12~15V/500mA Dimension(m/m) 212.3mm(W)* 38.3mm(H)* 144mm(D)    RU-850LTB   This innovative bodypack transmitter is designed with both REMOSET U and full function setting at itself. The settings include Frequency, Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes without audio input. This will save battery life and avoid over discharge. Besides REMOSET U a user can carry out setting at transmitter side. To cope with music instruments a pad of -20 dB is designed. Recharging circuit and connector are already built in case users want to upgrade the system.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960MHz Frequency Setting REMOSET U(Receive) RF Outpus Low / High Stability <±10KHz@Fc Frequency Deviation ±48KHz Spurious Emissions <-50dBc Function Mute, Auto Power Off, Sensitivity Adjust, Low Battery Display LCD + LED Input Connector 4P Mini XR Controls Power, Mute, Group, Channel, Frequency, Gain Adjust, Auto Power Off, Key Lock Battery UM3, AA x2    CM-501   * Uni-direction for high-quality voice pick-up. * Wide dynamic range and frequency response for excellent sound reinforcement. * Small size for minimum visibility. * Together with clip for easy attaching to a tie, lapel, dress etc.   Connector 4P Mini XLR Frequency Response 100~15,000 Hz Polar Pattern Cardioid Sensitivity (at 1KHz) -60±3 dB* (1mV)*0dB=1V/?bar Impedance 2.2k? Max. SPL for 1% THD 130dB  Dimension(mm) Ø10.1mm(W)*  26.4mm(H) Net Weight 21.5g

Read more less

Based on US-8001 successful experience RU-8012 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand   general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960 MHz Frequency Setting Ultrasonic / REMOSET (Transmit) Receiving Mode Antenna Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6%@1KHz Sensitivity -95dBm,S/N>80dB Rejection Ratio >80 dB Frequency Response 50Hz~16KHz±2dB Antenna Type BNC Socket Antenna Booster Power DC12~15V/100mA Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter, RF Meter, Battery Status Display LCD Controls Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level Ref/ ±22.5KHz Dev@1KHz Tone ?6.3 Phone Jack/ -10dBV XLR Jack/ -4dBV(Line) . -24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone, Noise and Mute Output Connector 2 independent balanced XLR and 2 Ø6.3mm unbalanced. Power Supply DC12~15V/500mA Dimension(m/m) 212.3mm(W)* 38.3mm(H)* 144mm(D)   RU-850LTB This innovative bodypack transmitter is designed with both REMOSET U and full function setting at itself. The settings include Frequency, Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes without audio input. This will save battery life and avoid over discharge. Besides REMOSET U a user can carry out setting at transmitter side. To cope with music instruments a pad of -20 dB is designed. Recharging circuit and connector are already built in case users want to upgrade the system.    Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960MHz Frequency Setting REMOSET U(Receive) RF Outpus Low / High Stability <±10KHz@Fc Frequency Deviation ±48KHz Spurious Emissions <-50dBc Function Mute, Auto Power Off, Sensitivity Adjust, Low Battery Display LCD + LED Input Connector 4P Mini XR Controls Power, Mute, Group, Channel, Frequency, Gain Adjust, Auto Power Off, Key Lock Battery UM3, AA x2    CX-504 * Uni-direction for high-quality voice pick-up. * Excellent gain-before-feedback and noise isolation. * Lightweight benefits great freedom and mobility. * Ergonomic design ensures comfortable wearing.   Connector 4P Mini XLR       Frequency Response 30~18,000 Hz Polar Pattern Cardioid Sensitivity (at 1KHz) -68±3 dB* (0.4mV)*0dB=1V/?bar Impedance 680?   Max. SPL for 1% THD 130dB   Dimension(mm) 285mm(W)* 55mm(H)* 111.3mm(D) Net Weight 56.3 grams 

Read more less

Based on US-8001 successful experience RU-8012 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960 MHz Frequency Setting Ultrasonic / REMOSET (Transmit) Receiving Mode Antenna Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6%@1KHz Sensitivity -95dBm,S/N>80dB Rejection Ratio >80 dB Frequency Response 50Hz~16KHz±2dB Antenna Type BNC Socket Antenna Booster Power DC12~15V/100mA Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter, RF Meter, Battery Status Display LCD Controls Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level Ref/ ±22.5KHz Dev@1KHz Tone ?6.3 Phone Jack/ -10dBV XLR Jack/ -4dBV(Line) . -24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone, Noise and Mute Output Connector 2 independent balanced XLR and 2 Ø6.3mm unbalanced. Power Supply DC12~15V/500mA Dimension(m/m) 212.3mm(W)* 38.3mm(H)* 144mm(D)    This innovative transmitter is designed with both REMOSET U and full function setting at itself. The settings include Frequency, Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes. This will save battery life and avoid over discharge. Besides REMOSET U a user can carry out setting at transmitter side. A quick Lock On key is built inside. Recharging circuit and connecter are already built in case users want to upgrade the system.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960MHz Frequency Setting REMOSET U(Receive) RF Outpus Low / High Stability <±10KHz@Fc Frequency Deviation ±48KHz Spurious Emissions <-50dBc Function Mute, Auto Power Off, Sensitivity Adjust, Low Battery Display LCD+LED Controls Power, Mute, Group, Channel, Frequency, Gain Adjust, Auto Power Off, Key Lock Battery UM3, AA x2

Read more less

This innovative bodypack transmitter is designed with both REMOSET U and full function setting at itself. The settings include Frequency, Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes without audio input. This will save battery life and avoid over discharge. Besides REMOSET U a user can carry out setting at transmitter side. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes. This will save battery life and avoid over discharge. To cope with music instruments a pad of -20 dB is designed in this bodypack transmitter.   CM-501 * Uni-direction for high-quality voice pick-up. * Wide dynamic range and frequency response for excellent sound reinforcement. * Small size for minimum visibility. * Together with clip for easy attaching to a tie, lapel, dress etc.

Read more less

Dynamic hand-held UHF PLL microphone transmitter Bandwidth: 36 MHz 6 groups, each with up to 22 compatible preset channels 1,441 selectable individual frequencies REMOSET ULTRASONIC technology for receiver/transmitter synchronisation Lock function/mute function Special design to reduce handling noise, structure-borne noise and acoustic feedback 5-level display for indicating battery status and low battery alert, backlit LCD Switchable transmitting power

Read more less

RU-850TB This innovative bodypack transmitter is designed with Power/Mute button only. All adjustments and settings are carried out at receiver side and the transmitter will be set by patent pending REMOSET U. The settings include Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes. This will save battery life and avoid over discharge. To cope with music instruments a pad of -20 dB is designed in this bodypack transmitter.   CM-501 * Uni-direction for high-quality voice pick-up. * Wide dynamic range and frequency response for excellent sound reinforcement. * Small size for minimum visibility. * Together with clip for easy attaching to a tie, lapel, dress etc.

Read more less

Dynamic hand-held UHF PLL microphone transmitter Bandwidth: 36 MHz 6 groups, each with 22 compatible preset channels (114 channels) REMOSET ULTRASONIC technology for receiver/transmitter synchronisation Sensitivity adjustment (±15 dB) and transmitting power (10/50 mW) can be configured via receiver Mute function Special design to reduce handling noise, structure-borne noise and acoustic feedback Low battery alert

Read more less

RU-901G3 is the 3rd generation true diversity system. It inherits the reliability in electronic circuit design and mechanical design of the legendary US-901. To cope with the development of the technology it features function. It synchronizes a transmitter with data of frequency, gain control, ID and so on by pushing a button. Scan function is also provided.   * RU-901G3 is for medium and large venue   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Frequency Setting Remoset U Ultrasonic Receiving Mode True Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6% @ 1KHz Sensitivity -95dBm, S/N>80dB CMRR >80 dB Audio Frequency Response 50Hz~18KHz±2dB Antenna BNC (F) Antenna Bosster Power DC12~15V/100mA Display LCD Display Contents Group, Channel, Frequency, Battery Status, Antenna A/B, AF Meter(LED BAR), RF Meter (LED BAR) Controls  Power ON/OFF, Group, Channel, Frequency, Audio Level, Lock-on, Volume, Output Pad, Frequency Scan (ON/OFF) Audio Output Level Ref:±22.5KHz Dev@1KHz Tone?6.3 Phone Jack:-10dBV XLR Jack:-4dBV(Line)?-24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Output Connector Balanced XLR Socket x1 / Unbalanced ?6.3mm PHONE JACK x1 Power Supply DC12~15V/500mA Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region. 

Read more less

KEY FEATURES RU-901G3 Receiver Features:   *JTS “True diversity” which is when the two independent antennas (antenna diversity) are connected additionally to two independent receiver modules. So not only do they switch to which of the two antennas is getting the best signal, but also which receiver module is getting the best signal. This is JTS’ ultimate method of preventing drop-outs.   *REMOSET ULTRASONIC technology for receiver/transmitter synchronisation   *Auto-Scan function   *Pilot tone squelch and noise mute   *Backlit LCD display with status indications, e.g. group/channel, antenna A/B, RF receiving level, AF audio level   *1 x XLR output (balanced.) and 1 x 6.3 mm TS Jack output (unbalanced.)    *Removable BNC Antennas   *Half size Reciever with Optional rack mount kit available.   *Optional rechargable Station with rechargable batteries is available (G3CH-2)   Available in CH 38 (606.5-642MHz)       RU-G3TB Beltpack Features:   *Phase-locked Loop (PLL) synthesized tuner.   *Powered by 2 x AA batteries with 12 hrs. average battery life.   *Equipped with 4 Pin Mini XLR connector.   *Twin Back lit LCD display with channel and battery life indicator, ID number.   *The “lock-on” function prevents tampering and RF interruption.   *Extended dynamic range and smooth frequency response.   *Noise mute and tone-key squelch.   Available in CH 38 (606.5-642MHz)   Compatible with optional Guitar cable and optional Wireless instrument microphones and optional FGM-62 /170 Carbon series Microphones. Also compatible with the optional  JTS wireless goose-neck Microphones ask your dealer for more information on these fantastic optional extras.       CM-501 Tie Clip Microphone Features:   *Uni-directional for high-quality voice pick-up.   *Wide dynamic range and frequency response for excellent sound reinforcement.   *Small size for minimum visibility.   *Supplied with clip for easy attaching to a tie, lapel, dress etc.

Read more less

RU-901G3 is the 3rd generation true diversity system. It inherits the reliability in electronic circuit design and mechanical design of the legendary US-901. To cope with the development of the technology it features function. It synchronizes a transmitter with data of frequency, gain control, ID and so on by pushing a button. Scan function is also provided. * RU-901G3 is for medium and large venue RU-901G3 Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Frequency Setting Remoset U Ultrasonic Receiving Mode True Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6% @ 1KHz Sensitivity -95dBm, S/N>80dB CMRR >80 dB Audio Frequency Response 50Hz~18KHz±2dB Antenna BNC (F) Antenna Bosster Power DC12~15V/100mA Display LCD Display Contents Group, Channel, Frequency, Battery Status, Antenna A/B, AF Meter(LED BAR), RF Meter (LED BAR) Controls  Power ON/OFF, Group, Channel, Frequency, Audio Level, Lock-on, Volume, Output Pad, Frequency Scan (ON/OFF) Audio Output Level Ref:±22.5KHz Dev@1KHz Tone?6.3 Phone Jack:-10dBV XLR Jack:-4dBV(Line)?-24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Output Connector Balanced XLR Socket x1 / Unbalanced ?6.3mm PHONE JACK x1 Power Supply DC12~15V/500mA Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region.   * 1441 Selectable channels. * Phase-locked Loop (PLL) synthesized tuner. * Advanced circuitry ensures stable signal transmission. * Extended dynamic range and smooth frequency response. * Noise mute and tone-key squelch. * Internal antenna design.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Frequency Setting Remoset U Ultrasonic RF Outputs Low/High Stability <±10KHz@ Fc Frequency Deviation ±48KHz Spurious Emissions <-50dBc Display LCD+LED Controls Power ON/OFF, Mute ON/OFF, Group, Channel, Frequency, GAIN Adjust, Auto Power Off Adjust, Lock-on Mode Battery UM3, AA x2 Slot-in Charging Yes Dimensions 50(W) x 253(H) x 35.5(D) Notes Actual product specifications may vary depending on model and region.

Read more less

The JTS RU-G3TB/CM-501 is a R-G3TB UHF PLL wireless radio bodypack transmitter with uni-directional CM-501 lapel microphone. The RU-G3TB features REMOSET U, which provides automatic pairing with a compatible receiver. This bodypack receiver has a built in LCD display showing group, channel and battery status. This set also includes a CM-501 which is a small uni-directional condenser lapel microphone with wide dynamic range and frequency response. The microphone includes a clip for attaching to tie, lapel, dress, etc Features Phase-locked Loop (PLL) synthesized tuner Powered by 2 x AA batteries with 12 hrs. average battery life Equipped with 4 Pin Mini XLR connector LCD display with channel and battery life indicator, ID number The “lock-on” function prevents tampering and RF interruption Extended dynamic range and smooth frequency response Uni-directional lapel microphone RU-G3TB Bodypack transmitter Frequency Preparation: PLL Synthesized Control Carrier Frequency Range: UHF 823-865MHz or 606.5-642 MHz Frequency Setting: Remoset U Ultrasonic RF Outputs: Low/High Stability: <±10KHz@ Fc Frequency Deviation: ±48KHz Spurious Emissions: <-50dBc Display: LCD+LED Input Connector: MINI XLR Controls: Power ON/OFF, Mute ON/OFF, Group, Channel, Frequency, GAIN Adjust, Auto Power Off Adjust, Lock-on Mode Battery: UM3, AA x2 Slot-in Charging: Yes Dimensions: 62(W) x 80.3(H) x 22.6(D) CM-501 Lapel microphone Connector type 4-Pin Mini XLR Frequency Response: 100~15,000 Hz Polar Pattern: Cardioid Sensitivity (at 1 KHz): -60±3 dB* (1mV)*0dB=1V/?bar Impedance: 2.2k? Max. SPL for 1% THD: 130dB Dimensions: Ø10.1mm x 26.4mm Weight: 21.5g

Read more less

Features * 1441 Selectable channels. * Phase-locked Loop (PLL) synthesized tuner. * Advanced circuitry ensures stable signal transmission. * Extended dynamic range and smooth frequency response. * Noise mute and tone-key squelch. * Internal antenna design.

Read more less

This 14” shotgun microphone is designed for ENG, outdoor recording and other specialized uses. It provides narrow acceptance angle and is desirable for long distance sound pick up. Low cut and pad are available for best miking effect.   Type Electret Condenser Frequency Response 20~20,000 Hz Sensitivity -32±3 dB*(25mV)*0dB=1V/Pa Polar Pattern Hypercardioid Attenuation Switch -10 dB Low Frequency Roll-off 80 Hz Impedance Rated impedance is 200? Max. SPL for 1% THD 125dB (135dB with -10 dB Attenuation) Signal To Noise Ratio 78dB Power Supply 9~48VDC phantom power Output Connector 3P XLR (M) Length 360mm

Read more less

SGM-14KA is identical with SGM-14 except it has battery powered feature besides phantom power. This kit comes with a shoe mount suspension to isolate the touch noise. Two cables are included for both professional video camera and DSLR. A windscreen is also included in the pack. SGM-14KA is identical with SGM-14 except it has battery powered feature besides phantom power. This kit comes with a shoe mount suspension to isolate the touch noise. Two cables are included for both professional video camera and DSLR. A windscreen is also included in the pack.     SGM-14KA Type Electret Condenser Polar pattern Hypercardioid Frequency Response 40 to 20,000Hz Sensitivity(at 1,000Hz) (Phantom / Battery) -58±3 dB (1.26mV) / -59±3 dB (1mV) *0dB=1V /?bar Low Frequency Roll-off 180Hz Impedance(Phantom / Battery) Rated impedance is 500? / 600? Max. SPL for 1% THD (Phantom / Battery) 125dB / 110 Db Signal To Noise Ratio 70dB Power Supply (Phantom / Battery) 9~48VDC / 1.5V AA UM3 R6 Current consumption(Phantom / Battery) ?2mA / 0.4mA (1200 hours typical) Output Connector 3P XLR (M) Length 355.7mm

Read more less

The SIEM-111 System features reliable JTS UHF PLL technology. * There are 961 selectable UHF channels available. As many as 16 sets of SIEM-111T transmitters can operate on the same stage. * The system offers 4 groups, with each group having 16 compatible preset channels to choose from. This allows the monitor engineer to set up systems quickly and easily. * MPX Stereo Audio Transmission / Reception, switchable to Mono operation if desired. * All metal case construction on the SIEM 111R and SIEM 111T. * The JTS advanced circuitry assures outstanding signal-to-noise ratio. * IE-1 and IE-6 earphones seal off the ear canal with JTS designed Dyna-Driver ear buds which reduce undesired stage noise, ambient sound levels. * 3 pairs of different sized Silicon sleeves included with the IE series earphones ensure a right fit for the users ear canal and comfort.   Carrier Frequency Range 470~960 MHz RF Output Power 10 mW Nominal Frequency Deviation (modulation) ±40KHz Audio Input Impedance 20k?  Nominal Input Level -10 dBV ; 0 dBV (ATT-10 dBV)      Maximal Input Level 10 dBV ; 20 dBV (ATT-10 dBV)  LCD Display AF Level, Stereo/Mono, Attenuation Level, Group, Channel, Frequency Audio Input Connector 2 x Balanced XLR /Ø6.3mm phone Combo Socket Audio Output Connector 1 x 1/8” Stereo Phone Jack 1 x 1/4” Stereo Phone Jack Loop Out Connector 2 x Balanced Loop Out Socket Switching Power Supply 100-240V Switching power supply

Read more less

The SIEM-111 System features reliable JTS UHF PLL technology. * There are 961 selectable UHF channels available. As many as 16 sets of SIEM-111T transmitters can operate on the same stage. * The system offers 4 groups, with each group having 16 compatible preset channels to choose from. This allows the monitor engineer to set up systems quickly and easily. * MPX Stereo Audio Transmission / Reception, switchable to Mono operation if desired. * All metal case construction on the SIEM 111R and SIEM 111T. * The JTS advanced circuitry assures outstanding signal-to-noise ratio. * IE-1 and IE-6 earphones seal off the ear canal with JTS designed Dyna-Driver ear buds which reduce undesired stage noise, ambient sound levels. * 3 pairs of different sized Silicon sleeves included with the IE series earphones ensure a right fit for the users ear canal and comfort.    

Read more less

SIEM-2T This affordable in ear monitor has been waited for long time as more performers used to having in ear monitor instead of relying on wedges. The SIEM-2 breaks the price barrier for every musician. * Developed with JTS advanced wireless technology. * Wired and wireless design for ambience. * UHF PLL 16 selectable channels. * Over 60 meters of stable operation distance. * Outstanding signal to noise ratio. * Light weight engineering plastic chassis. * Built in limit to protect hearing. * Very affordable. * Ø6.3mm Line / mic input. Carrier Frequency Range 502~960 MHz RF Output Power 10 mW Nominal Frequency Deviation (modulation) ±40KHz Audio Input Impedance 20k?  Nominal Input Level -20 dBV  Maximal Input Level 0 dBV LED Display AF Level, Channel Audio Input Connector 2 x Balanced XLR  Loop Out Connector 2 x Ø6.3mm Balanced Loop Out Socket Operation Voltage 12-18 VDC, 600 mA    SIEM2R   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 502~960 MHz LED Display Channel  Controls Power On/Off, Channel selection, Volume control Audio Frequency Response 40~18,000 Hz Output connector 1/8” Dummy stereo Phone Jack Battery life 14 hours typical Battery 2 AA batteries   IE-1   * This wideband dynadriver earphone reproduces full range of frequency, natural mids, and full highs and bass. It delivers sound musicians want and should be heard with full detail. * Three pairs of silicon sleeve are provided with different sizes for best fitting and sound isolation. * Human friendly mechanical structure ensures long time fatigueless wearing. * Ergonomic design for long-time wearing without fatigue.    Frequency Response 20~20,000 Hz Transducer Type Dynamic Impedance 16? Sensitivity  (at 1000Hz) 114 dB/mW Distortion Less than 0.3% Cord Length 148cm with Ø3.5 stereo plug Net Weight 6 grams (cable excluded)

Read more less

This affordable in ear monitor has been waited for long time as more performers used to having in ear monitor instead of relying on wedges. The SIEM-2 breaks the price barrier for every musician. * Developed with JTS advanced wireless technology. * Wired and wireless design for ambience. * UHF PLL 16 selectable channels. * Over 60 meters of stable operation distance. * Outstanding signal to noise ratio. * Light weight engineering plastic chassis. * Built in limit to protect hearing. * Very affordable. * Ø6.3mm Line / mic input. Frequency Preparation PLL Synthesized Control Carrier Frequency Range 502~960 MHz LED Display Channel  Controls Power On/Off, Channel selection, Volume control Audio Frequency Response 40~18,000 Hz Output connector 1/8” Dummy stereo Phone Jack Battery life 14 hours typical Battery 2 AA batteries    The IE-6 is designed with dual performance drivers and built-in crossover. It loyally reproduces precision highs, natural mids, and full bass. The excellent IE-6 is specially designed for JTS wireless in ear monitoring system. Yet the dynamic design makes itself also perfectly compatible with systems from other major brands. High-dynamics, High-definition, Low-noise, distinct sound stage, transparent and airy highs, clear low-frequency, excellent isolation, as well as endurance for high sound pressure level, extreme durability and accurate audio reproduction.   Driver Dual balanced armatures(Single Hi/Single Low)with a passive crossover Frequency Response 20~18000 Hz  Impedance 22? Sensitivity  (at 1000Hz) 120 dB/mW Max. Input Power 150mW Distortion Less than 0.3% Cord length 140cm Net Weight 7 grams (excluding cable) Output Connector Gold-plated  Ø3.5mm phone, Stereo Option. Dual Plug Airline adaptor, 1/4” Adaptor (6.3mm) Standard Carrying Case Accessories Cleaning Rod, Three pairs of Silicon Sleeves (small, medium, and large)

Read more less

Dual-Channel UHF Transmission and True Diversity Reception With UHF true diversity technology, receiver 36 MHz switching bandwidth and 6 preset groups of up to 1441 selectable channels, the SPT-1R/1T wireless audio system is your perfect partner for mission critical applications. KEY FEATURES * Irradicate Audio Delay/Latency * Eliminate Complex Cable Runs * Fast Setup/Teardown with Great Installation Flexibility * Independent Audio Channel Control

Read more less

The ST-5000 is the easiest gooseneck mic can be found. Designed with Push ON/Push Off switch and XLR male output it meets basic requirements for all installed applications. * Supercardioid pick up pattern * Push ON/OFF * LED indicator * Balanced XLR male output   Type Back Electret Condenser Frequency Response 80~18,000Hz         Polar Pattern  Supercardioid                                                               Output Level(at 1,000Hz) -60±3 dB* (1mV)*0dB=1V /?bar Impedance 220? Max. SPL For 1% T.H.D. 125dB Current Consumption ?5.8mA                Output Connector XLR-M type(power module) Power Supply 12-48 VDC Phantom power Switch Push ON/OFF Gooseneck  Length 368mm Base Dimension 96mm(W)*46mm(H)*113mm(D) Net Weight 541 grams

Read more less

Hot Features : * Quick mount die-cast base. * Magnetic On/Off switch permits minimum noise. * Special anti-slip pad ensures firm standing and less bounced noise from desk. * Selectable switch for all kinds of condenser and dynamic gooseneck microphones. * Equipped with battery compartment in case of absence of phantom power.

Read more less

Shockmount plate with lockable XLR(F) connector. Dimensions(m/m): 81.9 (W) × 86 (H) × 50 (D)

Read more less

The ST-6000 is newly developed gooseneck microphone. The microphone is built with extra solid metal and isolates vibration and touch noise effectively. Membrane switch virtually eliminates switch noise. Low cut circuit makes installation easier.   Phantom Power  12~48V Current Consumption (Stand-by)  <3.5mA Frequency Response 20~20,000Hz +/- 3dB Output Connector 1. Cable with 3-pin male XLR 2. Cable with 3-pin male XLR and three unterminated conductors for logic control Input Connector 3-pin female XLR Push Control ON/OFF Function Selection Push ON/OFF, Push to Talk, Push to Mute, Logic Control

Read more less