* Hard-shell carry case against microphone damage. * Convenient and tender design. * Space available for : TXB-7M : 1 TX-2 and 4 TX-6, 2 TX-9   JTS Txb-7M Stage Seven Piece 7 Drum Microphone Kit Condenser (Black) Price: Not Available. TXB-7M : 1 TX-2 and 4 TX-6, 2 TX-9 The JTS TX-2 Dynamic Supercardioid Microphone provides articulated bass response for the miking of Kick Drums and other low frequency instruments such as Bass Guitar Amps.

Read more less

The SIEM-111 System features reliable JTS UHF PLL technology. * There are 961 selectable UHF channels available. As many as 16 sets of SIEM-111T transmitters can operate on the same stage. * The system offers 4 groups, with each group having 16 compatible preset channels to choose from. This allows the monitor engineer to set up systems quickly and easily. * MPX Stereo Audio Transmission / Reception, switchable to Mono operation if desired. * All metal case construction on the SIEM 111R and SIEM 111T. * The JTS advanced circuitry assures outstanding signal-to-noise ratio. * IE-1 and IE-6 earphones seal off the ear canal with JTS designed Dyna-Driver ear buds which reduce undesired stage noise, ambient sound levels. * 3 pairs of different sized Silicon sleeves included with the IE series earphones ensure a right fit for the users ear canal and comfort.    

Read more less

This affordable in ear monitor has been waited for long time as more performers used to having in ear monitor instead of relying on wedges. The SIEM-2 breaks the price barrier for every musician. * Developed with JTS advanced wireless technology. * Wired and wireless design for ambience. * UHF PLL 16 selectable channels. * Over 60 meters of stable operation distance. * Outstanding signal to noise ratio. * Light weight engineering plastic chassis. * Built in limit to protect hearing. * Very affordable. * Ø6.3mm Line / mic input. Frequency Preparation PLL Synthesized Control Carrier Frequency Range 502~960 MHz LED Display Channel  Controls Power On/Off, Channel selection, Volume control Audio Frequency Response 40~18,000 Hz Output connector 1/8” Dummy stereo Phone Jack Battery life 14 hours typical Battery 2 AA batteries    The IE-6 is designed with dual performance drivers and built-in crossover. It loyally reproduces precision highs, natural mids, and full bass. The excellent IE-6 is specially designed for JTS wireless in ear monitoring system. Yet the dynamic design makes itself also perfectly compatible with systems from other major brands. High-dynamics, High-definition, Low-noise, distinct sound stage, transparent and airy highs, clear low-frequency, excellent isolation, as well as endurance for high sound pressure level, extreme durability and accurate audio reproduction.   Driver Dual balanced armatures(Single Hi/Single Low)with a passive crossover Frequency Response 20~18000 Hz  Impedance 22? Sensitivity  (at 1000Hz) 120 dB/mW Max. Input Power 150mW Distortion Less than 0.3% Cord length 140cm Net Weight 7 grams (excluding cable) Output Connector Gold-plated  Ø3.5mm phone, Stereo Option. Dual Plug Airline adaptor, 1/4” Adaptor (6.3mm) Standard Carrying Case Accessories Cleaning Rod, Three pairs of Silicon Sleeves (small, medium, and large)

Read more less

The ST-5000 is the easiest gooseneck mic can be found. Designed with Push ON/Push Off switch and XLR male output it meets basic requirements for all installed applications. * Supercardioid pick up pattern * Push ON/OFF * LED indicator * Balanced XLR male output   Type Back Electret Condenser Frequency Response 80~18,000Hz         Polar Pattern  Supercardioid                                                               Output Level(at 1,000Hz) -60±3 dB* (1mV)*0dB=1V /?bar Impedance 220? Max. SPL For 1% T.H.D. 125dB Current Consumption ?5.8mA                Output Connector XLR-M type(power module) Power Supply 12-48 VDC Phantom power Switch Push ON/OFF Gooseneck  Length 368mm Base Dimension 96mm(W)*46mm(H)*113mm(D) Net Weight 541 grams

Read more less

The ST-6000 is newly developed gooseneck microphone. The microphone is built with extra solid metal and isolates vibration and touch noise effectively. Membrane switch virtually eliminates switch noise. Low cut circuit makes installation easier.   Phantom Power  12~48V Current Consumption (Stand-by)  <3.5mA Frequency Response 20~20,000Hz +/- 3dB Output Connector 1. Cable with 3-pin male XLR 2. Cable with 3-pin male XLR and three unterminated conductors for logic control Input Connector 3-pin female XLR Push Control ON/OFF Function Selection Push ON/OFF, Push to Talk, Push to Mute, Logic Control

Read more less

The JTS TK-600 Dynamic cardioid live Microphone, equipped with the most popular capsule, provides excellent performance for lead and backup vocals, and instrument miking at a moderate price and is comparable in sound quality to many microphones costing much more. The magnetic reed type On/Off switch provides silent switching and can also be placed into a locked position to prevent accidental or unwanted tampering. The internal pneumatic shock mount system assures low handling noise whether used in a handheld application or when placed on a microphone stand.   Type    Moving Coil Dynamic Frequency Response    50~15,000 Hz (TK-600) 80~12,000 Hz (TK-350/TK-280) Polar Pattern     Cardioid,rotationally symmetrical about microphone axis, uniform with frequency Sensitivity (at 1,000Hz)     -75dB*(0.18mV)*0dB=1V/?bar Impedance    600?

Read more less

The JTS TM-929 dynamic vocal microphone offers great performance at an entry level price. Featuring a wide frequency response of 50Hz-15kHZ, it is an ideal choice for the vocalist who has a limited budget, but wishes not to sacrifice good sound quality. The rugged die cast body, internal shock mount and magnetic reed type on/off switch also make it a great choice for various applications.   Type Moving Coil Dynamic Frequency Response 50~15,000 Hz Polar Pattern Cardioid,rotationally symmetrical about microphone axis, uniform with frequency Sensitivity (at 1,000Hz)  -75dB*(0.18mV)*0dB=1V/?bar  Impedance 600?

Read more less

The JTS TM-969 dynamic vocal / instrument microphone is an entry level model for vocals and or instrument miking. Featuring a cardioid pattern moving coil mic capsule, Lo-z (600 ohm) operation, internal shock mount, die cast body, a heavy duty matte screen, and a convenient on /off switch make it a good choice for Karaoke applications or as an entry level mic for snare drum, tom -toms and guitar amps.   Type Moving Coil Dynamic Frequency Response 80~12,000 Hz Polar Pattern Cardioid,rotationally symmetrical about microphone axis, uniform with frequency Sensitivity (at 1,000Hz) -75dB*(0.18mV)*0dB=1V/?bar  Impedance 600?

Read more less

Based on US-8001 successful experience RU-8012 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960 MHz Frequency Setting Ultrasonic / REMOSET (Transmit) Receiving Mode Antenna Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6%@1KHz Sensitivity -95dBm,S/N>80dB Rejection Ratio >80 dB Frequency Response 50Hz~16KHz±2dB Antenna Type BNC Socket Antenna Booster Power DC12~15V/100mA Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter, RF Meter, Battery Status Display LCD Controls Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level Ref/ ±22.5KHz Dev@1KHz Tone ?6.3 Phone Jack/ -10dBV XLR Jack/ -4dBV(Line) . -24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone, Noise and Mute Output Connector 2 independent balanced XLR and 2 Ø6.3mm unbalanced. Power Supply DC12~15V/500mA Dimension(m/m) 212.3mm(W)* 38.3mm(H)* 144mm(D)    This innovative transmitter is designed with both REMOSET U and full function setting at itself. The settings include Frequency, Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes. This will save battery life and avoid over discharge. Besides REMOSET U a user can carry out setting at transmitter side. A quick Lock On key is built inside. Recharging circuit and connecter are already built in case users want to upgrade the system.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960MHz Frequency Setting REMOSET U(Receive) RF Outpus Low / High Stability <±10KHz@Fc Frequency Deviation ±48KHz Spurious Emissions <-50dBc Function Mute, Auto Power Off, Sensitivity Adjust, Low Battery Display LCD+LED Controls Power, Mute, Group, Channel, Frequency, Gain Adjust, Auto Power Off, Key Lock Battery UM3, AA x2

Read more less

Based on US-8001 successful experience, RU-8011 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960 MHz Frequency Setting REMOSET U Receiving Mode Antenna Diversity Bandwidth 36MHz S/N Ratio >105dB(A) T.H.D <0.6%@1KHz Sensitivity -95dBm,S/N>80dB Rejection Ratio >80 dB Frequency Response 60Hz~15KHz±2dB Antenna Type Fixed Antenna Antenna Booster Power None Display LCD Display Contents Group, Channel, Antenna A/B, Mute Display, AF Meter, RF Meter, Frequency Scan, Audio Level, Volume Controls Power ON/OFF, Group, Channel, Mute Display, Frequency Scan (ON/OFF), Key Lock, Volume, Output Attenuation (XLR) Audio Output Level Ref/ ±22.5KHz Dev@1KHz Tone ?6.3 Phone Jack/ -10dBV XLR Jack/ -4dBV(Line) ? -24dBV(MIC) Audio Output Impedance 600? Squelch Pilot Tone & Noise Mute Output Connector 1 independent balanced XLR and one Ø6.3mm unbalanced. Power Supply DC12~15V/300mA Dimension (mm) 212.3mm(W)* 38.3mm(H)* 144mm(D) Notes Acutal product specifications may vary depending on region    This innovative bodypack transmitter is designed with Power/Mute button only. All adjustments and settings are carried out at receiver side and the transmitter will be set by patent pending REMOSET U. The settings include Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes. This will save battery life and avoid over discharge. To cope with music instruments a pad of -20 dB is designed in this bodypack transmitter.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960MHz Frequency Setting REMOSET U(Receive) RF Outpus Low / High Stability <±10KHz@Fc Frequency Deviation ±48KHz Spurious Emissions <-50dBc Function Mute, Auto Power Off, Sensitivity Adjust, Low Battery Display LED Input Connector 4P Mini XR Controls Power, Mute Battery UM3, AA x2    * Uni-direction for high-quality voice pick-up. * Wide dynamic range and frequency response for excellent sound reinforcement. * Small size for minimum visibility. * Together with clip for easy attaching to a tie, lapel, dress etc.   Connector 4P Mini XLR Frequency Response 100~15,000 Hz Polar Pattern Cardioid Sensitivity (at 1KHz) -60±3 dB* (1mV)*0dB=1V/?bar Impedance 2.2k? Max. SPL for 1% THD 130dB  Dimension(mm) Ø10.1mm(W)*  26.4mm(H) Net Weight 21.5g

Read more less

Based on US-8001 successful experience RU-8012 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960 MHz Frequency Setting Ultrasonic / REMOSET (Transmit) Receiving Mode Antenna Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6%@1KHz Sensitivity -95dBm,S/N>80dB Rejection Ratio >80 dB Frequency Response 50Hz~16KHz±2dB Antenna Type BNC Socket Antenna Booster Power DC12~15V/100mA Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter, RF Meter, Battery Status Display LCD Controls Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level Ref/ ±22.5KHz Dev@1KHz Tone ?6.3 Phone Jack/ -10dBV XLR Jack/ -4dBV(Line) . -24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone, Noise and Mute Output Connector 2 independent balanced XLR and 2 Ø6.3mm unbalanced. Power Supply DC12~15V/500mA Dimension(m/m) 212.3mm(W)* 38.3mm(H)* 144mm(D)

Read more less

Base on the successful experience of US-8001D, the RU-8011D is designed with JTS 2nd generation wireless technology. To cope with the squeezed radio spectrum, the system provides more compatible channels within limited bandwidth. The patent pending REMOSET sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960 MHz Frequency Setting REMOSET U Receiving Mode Antenna Diversity Bandwidth 36MHz S/N Ratio >105dB(A) T.H.D <0.6%@1KHz Sensitivity -95dBm,S/N>80dB Rejection Ratio >80 dB Frequency Response 60Hz~15KHz±2dB Antenna Type Fixed Antenna Antenna Booster Power None Display LCD Display Contents Group, Channel, Antenna A/B, Mute Display, AF Meter, RF Meter, Frequency Scan, Audio Level, Volume Controls Power ON/OFF, Group, Channel, Mute Display, Frequency Scan (ON/OFF), Key Lock, Volume, Output Attenuation (XLR) Audio Output Level Ref/ ±22.5KHz Dev@1KHz Tone ?6.3 Phone Jack/ -10dBV XLR Jack/ -4dBV(Line) ? -24dBV(MIC) Audio Output Impedance 600? Squelch Pilot Tone & Noise Mute Output Connector 1 independent balanced XLR and one Ø6.3mm unbalanced. Power Supply DC12~15V/300mA Dimension (mm) 212.3mm(W)* 38.3mm(H)* 144mm(D) Notes Acutal product specifications may vary depending on region   Based on US-8001 successful experience, RU-8011 is designed with JTS 2nd generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The patent pending REMOSET U sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option. 

Read more less

The SIEM-111 System features reliable JTS UHF PLL technology. * There are 961 selectable UHF channels available. As many as 16 sets of SIEM-111T transmitters can operate on the same stage. * The system offers 4 groups, with each group having 16 compatible preset channels to choose from. This allows the monitor engineer to set up systems quickly and easily. * MPX Stereo Audio Transmission / Reception, switchable to Mono operation if desired. * All metal case construction on the SIEM 111R and SIEM 111T. * The JTS advanced circuitry assures outstanding signal-to-noise ratio. * IE-1 and IE-6 earphones seal off the ear canal with JTS designed Dyna-Driver ear buds which reduce undesired stage noise, ambient sound levels. * 3 pairs of different sized Silicon sleeves included with the IE series earphones ensure a right fit for the users ear canal and comfort.   Carrier Frequency Range 470~960 MHz RF Output Power 10 mW Nominal Frequency Deviation (modulation) ±40KHz Audio Input Impedance 20k?  Nominal Input Level -10 dBV ; 0 dBV (ATT-10 dBV)      Maximal Input Level 10 dBV ; 20 dBV (ATT-10 dBV)  LCD Display AF Level, Stereo/Mono, Attenuation Level, Group, Channel, Frequency Audio Input Connector 2 x Balanced XLR /Ø6.3mm phone Combo Socket Audio Output Connector 1 x 1/8” Stereo Phone Jack 1 x 1/4” Stereo Phone Jack Loop Out Connector 2 x Balanced Loop Out Socket Switching Power Supply 100-240V Switching power supply

Read more less

This 14” shotgun microphone is designed for ENG, outdoor recording and other specialized uses. It provides narrow acceptance angle and is desirable for long distance sound pick up. Low cut and pad are available for best miking effect.   Type Electret Condenser Frequency Response 20~20,000 Hz Sensitivity -32±3 dB*(25mV)*0dB=1V/Pa Polar Pattern Hypercardioid Attenuation Switch -10 dB Low Frequency Roll-off 80 Hz Impedance Rated impedance is 200? Max. SPL for 1% THD 125dB (135dB with -10 dB Attenuation) Signal To Noise Ratio 78dB Power Supply 9~48VDC phantom power Output Connector 3P XLR (M) Length 360mm

Read more less

SIEM-2T This affordable in ear monitor has been waited for long time as more performers used to having in ear monitor instead of relying on wedges. The SIEM-2 breaks the price barrier for every musician. * Developed with JTS advanced wireless technology. * Wired and wireless design for ambience. * UHF PLL 16 selectable channels. * Over 60 meters of stable operation distance. * Outstanding signal to noise ratio. * Light weight engineering plastic chassis. * Built in limit to protect hearing. * Very affordable. * Ø6.3mm Line / mic input. Carrier Frequency Range 502~960 MHz RF Output Power 10 mW Nominal Frequency Deviation (modulation) ±40KHz Audio Input Impedance 20k?  Nominal Input Level -20 dBV  Maximal Input Level 0 dBV LED Display AF Level, Channel Audio Input Connector 2 x Balanced XLR  Loop Out Connector 2 x Ø6.3mm Balanced Loop Out Socket Operation Voltage 12-18 VDC, 600 mA    SIEM2R   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 502~960 MHz LED Display Channel  Controls Power On/Off, Channel selection, Volume control Audio Frequency Response 40~18,000 Hz Output connector 1/8” Dummy stereo Phone Jack Battery life 14 hours typical Battery 2 AA batteries   IE-1   * This wideband dynadriver earphone reproduces full range of frequency, natural mids, and full highs and bass. It delivers sound musicians want and should be heard with full detail. * Three pairs of silicon sleeve are provided with different sizes for best fitting and sound isolation. * Human friendly mechanical structure ensures long time fatigueless wearing. * Ergonomic design for long-time wearing without fatigue.    Frequency Response 20~20,000 Hz Transducer Type Dynamic Impedance 16? Sensitivity  (at 1000Hz) 114 dB/mW Distortion Less than 0.3% Cord Length 148cm with Ø3.5 stereo plug Net Weight 6 grams (cable excluded)

Read more less

Based on US-8001 successful experience RU-8012 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand   general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960 MHz Frequency Setting Ultrasonic / REMOSET (Transmit) Receiving Mode Antenna Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6%@1KHz Sensitivity -95dBm,S/N>80dB Rejection Ratio >80 dB Frequency Response 50Hz~16KHz±2dB Antenna Type BNC Socket Antenna Booster Power DC12~15V/100mA Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter, RF Meter, Battery Status Display LCD Controls Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level Ref/ ±22.5KHz Dev@1KHz Tone ?6.3 Phone Jack/ -10dBV XLR Jack/ -4dBV(Line) . -24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone, Noise and Mute Output Connector 2 independent balanced XLR and 2 Ø6.3mm unbalanced. Power Supply DC12~15V/500mA Dimension(m/m) 212.3mm(W)* 38.3mm(H)* 144mm(D)   RU-850LTB This innovative bodypack transmitter is designed with both REMOSET U and full function setting at itself. The settings include Frequency, Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes without audio input. This will save battery life and avoid over discharge. Besides REMOSET U a user can carry out setting at transmitter side. To cope with music instruments a pad of -20 dB is designed. Recharging circuit and connector are already built in case users want to upgrade the system.    Frequency Preparation PLL Synthesized Control Carrier Frequency Range 470~960MHz Frequency Setting REMOSET U(Receive) RF Outpus Low / High Stability <±10KHz@Fc Frequency Deviation ±48KHz Spurious Emissions <-50dBc Function Mute, Auto Power Off, Sensitivity Adjust, Low Battery Display LCD + LED Input Connector 4P Mini XR Controls Power, Mute, Group, Channel, Frequency, Gain Adjust, Auto Power Off, Key Lock Battery UM3, AA x2    CX-504 * Uni-direction for high-quality voice pick-up. * Excellent gain-before-feedback and noise isolation. * Lightweight benefits great freedom and mobility. * Ergonomic design ensures comfortable wearing.   Connector 4P Mini XLR       Frequency Response 30~18,000 Hz Polar Pattern Cardioid Sensitivity (at 1KHz) -68±3 dB* (0.4mV)*0dB=1V/?bar Impedance 680?   Max. SPL for 1% THD 130dB   Dimension(mm) 285mm(W)* 55mm(H)* 111.3mm(D) Net Weight 56.3 grams 

Read more less

* 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Adjustable transmission power between Low and High NEWEST FEATURE: * It is designed with slot-in charging feature with two AA NiMH rechargeable batteries.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ±48KHz (Peak) LCD Display Group, Channel, Frequency, Battery Status, User Name, GAIN Adjust Controls Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18kHz Battery UM3, AA x2 Capsules Module  Interchangeable Dimensions 50(W) x 253(H) x 35.5(D) Weight 350g Notes Actual product specifications may vary depending on model and region   R-4TB * 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Extended dynamic range and smooth frequency response. * Adjustable transmission power between Low and High * The panel Lock-On function prevents tampering and RF interruption * Together with JTS various music instrument mics, headset mics and tie clip mics this bodypack is versatile for all applications. NEWEST FEATURE: * It is designed with slot-in charging feature with two AA NiMH rechargeable batteries.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ± 48KHz (Peak) Chassis Plastic LCD Display Group, Channel, Frequency, Battery Status, User Name , GAIN Adjust  Controls Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Output Connector 4P Mini XLR Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18k Hz Battery UM3, AA x2 Dimensions 62.3mm (W) x97.5mm (H) x20mm (D)  Weight 75g Notes Actual product specifications may vary depending on model and region.  CM-501 * Uni-direction for high-quality voice pick-up. * Wide dynamic range and frequency response for excellent sound reinforcement. * Small size for minimum visibility. * Together with clip for easy attaching to a tie, lapel, dress etc.   Connector 4P Mini XLR Frequency Response 100~15,000 Hz Polar Pattern Cardioid Sensitivity (at 1KHz) -60±3 dB* (1mV)*0dB=1V/?bar Impedance 2.2k? Max. SPL for 1% THD 130dB  Dimension(mm) Ø10.1mm(W)*  26.4mm(H) Net Weight 21.5g

Read more less

RU-901G3 is the 3rd generation true diversity system. It inherits the reliability in electronic circuit design and mechanical design of the legendary US-901. To cope with the development of the technology it features function. It synchronizes a transmitter with data of frequency, gain control, ID and so on by pushing a button. Scan function is also provided. * RU-901G3 is for medium and large venue RU-901G3 Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Frequency Setting Remoset U Ultrasonic Receiving Mode True Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6% @ 1KHz Sensitivity -95dBm, S/N>80dB CMRR >80 dB Audio Frequency Response 50Hz~18KHz±2dB Antenna BNC (F) Antenna Bosster Power DC12~15V/100mA Display LCD Display Contents Group, Channel, Frequency, Battery Status, Antenna A/B, AF Meter(LED BAR), RF Meter (LED BAR) Controls  Power ON/OFF, Group, Channel, Frequency, Audio Level, Lock-on, Volume, Output Pad, Frequency Scan (ON/OFF) Audio Output Level Ref:±22.5KHz Dev@1KHz Tone?6.3 Phone Jack:-10dBV XLR Jack:-4dBV(Line)?-24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Output Connector Balanced XLR Socket x1 / Unbalanced ?6.3mm PHONE JACK x1 Power Supply DC12~15V/500mA Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region.   * 1441 Selectable channels. * Phase-locked Loop (PLL) synthesized tuner. * Advanced circuitry ensures stable signal transmission. * Extended dynamic range and smooth frequency response. * Noise mute and tone-key squelch. * Internal antenna design.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Frequency Setting Remoset U Ultrasonic RF Outputs Low/High Stability <±10KHz@ Fc Frequency Deviation ±48KHz Spurious Emissions <-50dBc Display LCD+LED Controls Power ON/OFF, Mute ON/OFF, Group, Channel, Frequency, GAIN Adjust, Auto Power Off Adjust, Lock-on Mode Battery UM3, AA x2 Slot-in Charging Yes Dimensions 50(W) x 253(H) x 35.5(D) Notes Actual product specifications may vary depending on model and region.

Read more less

The system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation.   JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz S / N Ratio > 105dB T.H.D <0.6% @ 1KHz Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED BAR), RF Meter (LED BAR) , Battery Status Controls  Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level -12dB AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Operation Voltage 100 ~ 240V Output Connector 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region. 

Read more less

RU-901G3 is the 3rd generation true diversity system. It inherits the reliability in electronic circuit design and mechanical design of the legendary US-901. To cope with the development of the technology it features function. It synchronizes a transmitter with data of frequency, gain control, ID and so on by pushing a button. Scan function is also provided.   * RU-901G3 is for medium and large venue   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Frequency Setting Remoset U Ultrasonic Receiving Mode True Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6% @ 1KHz Sensitivity -95dBm, S/N>80dB CMRR >80 dB Audio Frequency Response 50Hz~18KHz±2dB Antenna BNC (F) Antenna Bosster Power DC12~15V/100mA Display LCD Display Contents Group, Channel, Frequency, Battery Status, Antenna A/B, AF Meter(LED BAR), RF Meter (LED BAR) Controls  Power ON/OFF, Group, Channel, Frequency, Audio Level, Lock-on, Volume, Output Pad, Frequency Scan (ON/OFF) Audio Output Level Ref:±22.5KHz Dev@1KHz Tone?6.3 Phone Jack:-10dBV XLR Jack:-4dBV(Line)?-24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Output Connector Balanced XLR Socket x1 / Unbalanced ?6.3mm PHONE JACK x1 Power Supply DC12~15V/500mA Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region. 

Read more less

Based on US-8001 successful experience, RU-8011 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option.   This innovative bodypack transmitter is designed with Power/Mute button only. All adjustments and settings are carried out at receiver side and the transmitter will be set by patent pending REMOSET U. The settings include Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes. This will save battery life and avoid over discharge. To cope with music instruments a pad of -20 dB is designed in this bodypack transmitter.   * Uni-direction for high-quality voice pick-up. * Excellent gain-before-feedback and noise isolation. * Lightweight benefits great freedom and mobility. * Ergonomic design ensures comfortable wearing

Read more less

48V Phantom Power Supply. Provides constant 48V power for condenser microphones when phantom power is not available on the mixer or for field recording direct to tape, hard disk computer based on DAW. The PS-2 is a dual input version of PS-2 Number of Channels    PS-1 : 1 PS-2 : 2 Regulated Output Voltage    48V ±2V DC  Short Circuit Output Current    14 mA Signal To Noise Ratio    105 dB Frequency Response    10~22,000 Hz AC Input    110/220V AC, 50-60 Hz, 3W max  Input Connector    3-pin XLR Female  Output Connector    3-pin XLR Male Dimensions (mm)    143.6mm(W)* 55.9mm(H)* 184.7mm(D)  

Read more less

48V Phantom Power Supply. Provides constant 48V power for condenser microphones when phantom power is not available on the mixer or for field recording direct to tape, hard disk computer based on DAW. The PS-2 is a dual input version of PS-2 Number of Channels    PS-1 : 1 PS-2 : 2 Regulated Output Voltage    48V ±2V DC  Short Circuit Output Current    14 mA Signal To Noise Ratio    105 dB Frequency Response    10~22,000 Hz AC Input    110/220V AC, 50-60 Hz, 3W max  Input Connector    3-pin XLR Female  Output Connector    3-pin XLR Male Dimensions (mm)    143.6mm(W)* 55.9mm(H)* 184.7mm(D)  

Read more less

The system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation. JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ±48KHz (Peak) Chassis Plastic (R-4TH) / Aluminium alloy (R-4THA) LCD Display Group, Channel, Frequency, Battery Status, User Name, GAIN Adjust Controls Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18kHz Battery UM3, AA x2 Capsules Module  Interchangeable Dimensions 50(W) x 253(H) x 35.5(D) Weight 350g Notes Actual product specifications may vary depending on model and region.

Read more less

The JTS R-4-RACK-4TB is a 19” rack/flight case featuring an R-4 UHF PLL Quad channel diversity wireless receiver, four R-4TBM bodypack transmitters and a 2U rack draw. The receiver features REMOSET which enables the transmitters and receiver to wirelessly sync frequencies in under a second with the push of a button. The antenna outputs and AC can be cascaded to enable multiple receivers to be connected together. This system also features four JTS R-4TBM bodypack transmitters featuring adjustable RF output, aluminium alloy chassis and a large LCD display screen showing low battery and user name. REMOSET ID Pairing is also built into this device for easy pairing with the R-4 receiver. The heavy-duty rack provides protection of the complete system during transit. Please Note. This system is available in two frequency bands: 606.5-638MHz includes Channel 38 and is the most reliable solution for portable wireless microphone systems in the UK and requires a licence (www.ofcom.org.uk). 823-865MHz includes Channel 70 (863-865MHz) which can be operated licence-free in the UK and Europe. Features 19” flight case to store and protect system Integrated storage drawer Suitable as a portable system REMOSET synchronisation Pilot tone and noise mute Integrated antenna distribution 4 Independent XLR outputs and 1 XLR for mixed output Delivery Includes 1 R-4 diversity receiver   4 R-4TBM bodypack transmitters 1 flight case Technical Data R-4 diversity receiver Frequency Preparation: PLL Synthesized Control Carrier Frequency Range: UHF 823-865MHz (CH70 863-865MHz licence free)/ 606.5-642 MHz (CH38 606-614 MHz licence required) S / N Ratio: > 105dB T.H.D:    <0.6% @ 1KHz Display Contents: Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED BAR), RF Meter (LED BAR), Battery Status Controls: Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level: -12dB AF Output Impedance: 600? Squelch: Pilot Tone & Noise Mute Operation Voltage: 100 ~ 240V Output Connector: 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output Dimension (WxHxD): 212.3 x 38.3 x 144mm R-4TBM bodypack transmitter Frequency Preparation: PLL Synthesized Control Carrier Frequency Range: UHF 823-865MHz (CH70 863-865MHz licence free)/ 606.5-642 MHz (CH38 606-614 MHz licence required) RF Outputs: Low / High Stability: < ±10KHz Frequency Deviation: ± 48KHz (Peak) Chassis: Aluminium alloy LCD Display: Group, Channel, Frequency, Battery Status, User Name, GAIN Adjust Controls: Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Input Connector: 4P Mini XLR Spurious Emissions: <-50 dBC Audio Frequency Response: 50Hz ~ 18k Hz Battery: UM3, AA x2 Dimensions (WxHxD): 62 x 80.3 x 22.6mm   Weight: 93g

Read more less

The R-4 system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation. JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance.   R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation. JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz S/N Ratio > 105dB T.H.D <0.6% @ 1KHz Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED BAR), RF Meter (LED BAR) , Battery Status Controls  Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level -12dB AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Operation Voltage 100 ~ 240V Output Connector 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region. 

Read more less

Features: * 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Extended dynamic range and smooth frequency response. * Adjustable transmission power between Low and High * The panel Lock-On function prevents tampering and RF interruption * Together with JTS various music instrument mics, headset mics and tie clip mics this bodypack is versatile for all applications. Specifications: Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 506-542 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ± 48KHz (Peak) Chassis Aluminium alloy LCD Display Group, Channel, Frequency, Battery Status, User Name , GAIN Adjust Controls Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Output Connector 4P Mini XLR Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18k Hz Battery UM3, AA x2 Dimensions 62mm (W) x80.3mm (H) x22.6mm (D) Weight 93g Notes Actual product specifications may vary depending on model and region.

Read more less

The PDM-57 is a microphone suitable for recordings of guitar instruments or bass harmonicas wind instruments in wood or metal crates or percussions. With its cable connection, dynamic system/cardio-type system - bandwidth 50-16500 Hz - impedance 600 Ohms - sensitivity 1.8 mV/Pa/1 kHz - sound pressure max. 145 dB power supply - XLR micro connections, sym. Connections cable XLR, sym.,XLR, sym. Cast-iron casing, weight 250 g   For general sound pickup of instruments and for live performances Natural sound characteristics Characteristic sound with a high recognition value Supplied with connection cable   Package Dimensions ?26 x 12.2 x 8.2 cm; 110 Grams Item model number ?PDM-57 Colour ?Black Connector ?XLR Connector Material ?Metal Power Source ?Corded Electric Item Weight ?110 g Manufacturer ?JTS

Read more less

  The MK-636 are designed with JTS D-50 capsule with ultra extended response and superior directional character. The soldering-free detachable capsule module and bomb-proof mechanical structure render the MK-636 an ideal microphone for heavy commercial application. Specifications :-  Type                                : Moving Coil Dynamic Frequency Response        : 50~16,500 Hz Polar Pattern                     : Supercardioid, rotationally Symmetrical about microphone axis,uniform with frequency Sensitivity (at 1,000Hz     : -75±3dB*(0.18mV)*0dB=1V /?bar Impedance                         : 600? Phasing                                 : Positive pressure on diaphragm produces positive voltage on pin2 with respect to pin3  Connector                         : Three-pin professional audio connector (male XLR type) Net Weight                         : Mk-636: 280 grams (cable excluded)    

Read more less

The JS-1USB provides excellent performance to both live and studio application. A one inch super thin 24K golden platted diaphragm together with a solid brass machined capsule assembly assures precise polar pattern, full range frequency response and high SPL capability. Advanced circuit design and finest available components offer low self-noise, exceptional transient response and transparent reproduction of an acoustic characteristic. Double brass windscreen prevents pop/EMI effectively.   Features ? Advanced 1-inch, externally biased, ultra-thin, 24-karat gold-layered plate, highly smooth-faced, Mylar film      diaphragms provide superior transient response ? Finest handcraft assembler, careful test and calibration on every each of microphones ? Formality -machined, nickel-plated brass, acoustic element screen provides enhanced voicing stability and optimal      sensitivity ? The cardioid characteristic maintains a smooth frequency response at a distance of 30 to 40 cm ? Full-range frequency response (20 Hz - 20 KHz) for an extremely accurate reproduction of voice and instruments ? Pressure-gradient transducer with double membrane capsule ? Ideal as main and as support microphone in the most differing recording situations Applications  ? For most general purpose applications in studios, for broadcasting, film and television  ? Used as a main microphone for orchestra recordings, as a spot mic for single instruments, and extensively as a      vocal mic. for all types of music and speech  ? The classical studio mic. for vocalists (soloists and background vocalists)  ? Announcer's mic. for broadcasting, dubbing, voice-over  ? Overhead miking drums or percussions  ? Spot mic. for wind instruments, brass and woodwind, strings (especially cello and double bass), piano, and      percussion

Read more less

Based on the successful experience of JS-1 series JS-22 is designed for instrument miking from strings to percussions. The JS-22 is built on a solid brass with accurate processing. The 1/2” golden plated diaphragm is manually assembled by JTS craftsman. The precise designed circuit with low cut and pad feature provides flat response. This microphone royally reproduces any kinds of instruments and vocals. Application : Acoustic guitar, acoustic bass, strings, piano, woodwinds, orchestra, stereo pick-up, ensemble vocals and cymbals.   JS-22 Type Condenser Mic Frequency Response 20~20,000 Hz Sensitivity    -36±3 dB* (15.8mV) 0dB=1V /Pa,1kHz Directional Pattern Cardioid Attenuation Switch -10dB Low Frequency Roll-off 80Hz Impedance 100? Max. SPL For 1% T.H.D. 140 dB Signal To Noise Ratio 78dB Power Supply 36~52VDC phantom power Current consumption ?3mA Output XLR-M type(power module) Dimensions(mm) Ø22.5mm(W) * 150.5mm(H)

Read more less

*Frequency response especially optimized for the vocal spectrum *Low handling noise and high acoustic feedback suppression *Robust design for a long life *Supplied with connection cable   Specifications :-   Polar pattern                            : cardioid System                                    : dynamic Audio frequency range    : 50-16,500 Hz Nominal impedance            : 600 ? Sensitivity                           : 1.8 mV/Pa Max. sound pressure            : 147 dB Housing material                    : diecast metal Admiss. ambient temp.    : 0-40 °C Weight                                    : 315 g  

Read more less

* Rugged, lightweight design. * Space available for 1 NX-2, 4 NX-6 and 3 handheld mics. * Offers great convenience and protection.      

Read more less

CS-1 expansion kit, combined with D7PDM-1 extension cables, can expand the number of using units of i-conference discussion system from 50 to 150 by adding maximum two additional CS-1CU functioning as power supply units only. The system is controlled by the master CS-1CU unit. Using D7P-10 or D7P-20 extension cables to extend the operation distance. SPECIFICATIONS Input : 7-pin DIN Connector Output : 7-pin DIN Connector Dimension(mm) : 115mm(W)* 65mm(D)* 38mm(H) Dimension Packaging Weight : 0.6 kg

Read more less

  * Adjustable transmission power between Low and High * The panel Lock-On function prevents tampering and RF interruption * Together with JTS various capsules preferred miking is assured. * With TC-22 true condenser capsule (option)   NEWEST FEATURE: * It is designed with slot-in charging feature with two AA NiMH rechargeable batteries.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ± 48KHz (Peak) Chassis Aluminium alloy LCD Display Group, Channel, Frequency, Battery Status, User Name , GAIN Adjust Controls Power ON/OFF, AF Level, Frequency (Up/ Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Output Connector 4P Mini XLR Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18k Hz Battery UM3, AA x2 Dimensions 50mm (W) x253mm (H) x35.5mm (D)  Weight 93g Notes Actual product specifications may vary depending on model and region. . The system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation.   JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance.   Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz S/N Ratio > 105dB T.H.D <0.6% @ 1KHz Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED BAR), RF Meter (LED BAR) , Battery Status Controls  Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level -12dB AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Operation Voltage 100 ~ 240V Output Connector 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region. 

Read more less

CS-1 expansion kit, combined with D7PDM-1 extension cables, can expand the number of using units of i-conference discussion system from 50 to 150 by adding maximum two additional CS-1CU functioning as power supply units only. The system is controlled by the master CS-1CU unit. Using D7P-10 or D7P-20 extension cables to extend the operation distance. SPECIFICATIONS Input : 7-pin DIN Connector Output : 7-pin DIN Connector Dimension(mm) : 115mm(W)* 65mm(D)* 38mm(H) Dimension Packaging Weight : 0.6 kg

Read more less

The delegate unit enables the attendants to participate in a discussion by speaking through a microphone, controlled by a microphone ON/OFF push-button, and listening to discussion by the internal loudspeaker and external headphone. FEATURES Back electret cartridge with cardioid polar pattern, optimised for voice transmissions Low-distortion speaker Operation via function button Headphone connection Status displays at microphone and desktop station SPECIFICATIONS Headphone output Output level : -8dBV / +2 dBV (nominal / maximum) Output Impedance : 22? Gooseneck Microphone Type : Back Electret Condenser Frequency Response : 50 ~ 18,000Hz Polar Pattern : Cardioid Max. SPL for 1% THD : 125dB Gooseneck Length : 12” (305mm) Dimensions (HxWxD) without mic : 170*115*65 mm Length of mic : 400 mm Weight : 1095 grams Dimension Packaging Weight : 1.8 kg

Read more less

CS-1CUR is designed with a USB recorder. The file format is MP3. One 32G USB memory stick can record over 150 hours. One hot key recording makes the job easy. SPECIFICATIONS Input - Type : XLR - Mic : 4.7K? - Line : 20K?   Recording Function - Interface : USB3.0 32GByte (Backward Compatible) - Format : MP3 - MAX. Recording Time : More than 240 hours (With 32GByte USB) - Controls : Recording ON/OFF button / Recording status LED display / - Without Playback Funciton - MAX Gain : > 70dB - Frequency Respond : 35 ~ 20,000Hz - THD% Input : <0.06% - Signal-to-noise radio : > 70 dB - Input Attenuation : -50dB - Phantom Power : +48V - Mic In Attenuation : -5dB /-10dB - Mic Attenuation : -10dB /-15dB /-20dB - Output Attenuation : -50dB - Voltage Output : +5 VDC ± 0.2V - Power Supply : 18VDC, 1A - Power Consumption : 18W - Fuse : T1AE 250V (Slow-Blow) - Weight : 2.3 kg - Dimension (mm) : 420(W) * 44(H) * 198.5(D) Dimension Packaging Weight : 1.8 kg

Read more less

he chairman unit not only provides the same function as the delegate unit, but also supports the addition of a “Priority button”, that enables the chairman to control the discussion by temporary or permanently overriding and deactivating all active microphones of the delegate units. FEATURES Back electret cartridge with cardioid polar pattern, optimised for voice transmissions Low-distortion speaker Reproduction via optional headphones Large function button Status displays at microphone and desktop station Priority button allows to interrupt an ongoing discussion between conference delegates, alternatively with a chime SPECIFICATIONS Headphone output - Output level : -8dBV / +2 dBV (nominal / maximum) - Output Impedance : 22?   Gooseneck Microphone - Type : Back Electret Condenser - Frequency Response : 50 ~ 18,000Hz - Polar Pattern : Cardioid - Max. SPL for 1% THD : 125dB - Gooseneck Length : 12” (305mm) - Dimensions (HxWxD) without mic : 170*115*65 mm - Length of mic : 400 mm - Weight : 1095 grams Dimension Packaging Weight : 1.8 kg

Read more less

* The growing family of headset microphones enables you to customize any application with the right microphones. * These microphones feature versatile adjustments for best fitting and picking up. The ergonomic design provides the ultimate low profile. * The CM-8015 and CM-825i are designed with condenser capsule of diameter 2.5mm representing JTS advanced ECM technology and are ideal for theater, production and broadcasting. * Available in black and beige with various connecting configuration for other brands’ wireless systems.   Connector 4 pin mini XLR Frequency Response 50 ~ 18,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -53±3 dB* (2.24mV)*0dB=1V/?bar Impedance 1.2k? Max. SPL for 1% THD 130dB

Read more less

* The growing family of headset microphones enables you to customize any application with the right microphones. * These microphones feature versatile adjustments for best fitting and picking up. The ergonomic design provides the ultimate low profile. * The CM-8015 and CM-825i are designed with condenser capsule of diameter 2.5mm representing JTS advanced ECM technology and are ideal for theater, production and broadcasting. * Available in black and beige with various connecting configuration for other brands’ wireless systems.   Connector 4 pin mini XLR Frequency Response 50 ~ 18,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -53±3 dB* (2.24mV)*0dB=1V/?bar Impedance 1.2k? Max. SPL for 1% THD 130dB

Read more less

Single Ear-hook Sub-miniature Omni-directional Microphone Specifications Connector 801C4 (4 pin mini XLR)  801C3 (3 pin mini XLR) 801CS (3.5 stereo plug) Frequency Response 50 ~ 18,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -53±3 dB* (2.24mV)*0dB=1V/?bar Impedance 1.2k? Max. SPL for 1% THD 130dB

Read more less

Single Ear-hook Sub-miniature Omni-directional Microphone Specifications Connector 801C4 (4 pin mini XLR)  801C3 (3 pin mini XLR) 801CS (3.5 stereo plug) Frequency Response 50 ~ 18,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -53±3 dB* (2.24mV)*0dB=1V/?bar Impedance 1.2k? Max. SPL for 1% THD 130dB

Read more less

* Single Ear-hook Microphone designed for professional kids.

Read more less

* Single Ear-hook Microphone designed for professional kids.

Read more less

* The growing family of headset microphones enables you to customize any application with the right microphones. * These microphones feature versatile adjustments for best fitting and picking up. The ergonomic design provides the ultimate low profile. * Available in black and beige with various connecting configuration for other brands’ wireless systems.   Connector   801C4 (4 pin mini XLR) 801C3 (3 pin mini XLR) 801CS (3.5 stereo plug) Frequency Response 60 ~ 15,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -64±3 dB* (0.63mV)*0dB=1V/?bar Impedance 1.8k? Max. SPL for 1% THD 130dB

Read more less

* The growing family of headset microphones enables you to customize any application with the right microphones. * These microphones feature versatile adjustments for best fitting and picking up. The ergonomic design provides the ultimate low profile. * Available in black and beige with various connecting configuration for other brands’ wireless systems.   Connector   801C4 (4 pin mini XLR) 801C3 (3 pin mini XLR) 801CS (3.5 stereo plug) Frequency Response 60 ~ 15,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -64±3 dB* (0.63mV)*0dB=1V/?bar Impedance 1.8k? Max. SPL for 1% THD 130dB

Read more less