PA System & Live Sound
-
FBT FBT MITUS 112A 2-Way 12" Processed Active Speaker ( MITUS-112A / MITUS112A )
The FBT MITUS 112A 12" Processed Active Speaker has an XLR with link out input connector and 1.5 kHz crossover frequency. Processed Active Speaker - 600W + 300W 133DB SPLThe FBT MITUS 112A is a two-way bi-amplified speaker system shall incorporate 1 x 12" B&C neodymium woofer with 3" voice coil and 1" exit B&C neodymium driver with 1.7" voice coil coupled to a rotatable 80° x 50° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 130°. The FBT MITUS 112A shall meet the following performance criteria: Frequency response of 50Hz to 20kHz, Maximum SPL of 133dB, 600W RMS + 300W RMS class D amplifiers. It also provides a DSP with 8 EQ presets. It features 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.The control panel provides XLR input & link, level, preset, HPfilter and GND lift.The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 112A speaker to be surface mounted on ceilings and a standard 1.38" speaker stand socket allows the FBT MITUS 112Ato be mounted on speaker stands. Key Features 2-way, bi-amplified, bass-reflex design 320 mm (12'') B&C neodymium magnet woofer with 75 mm (3'') voice coil 25 mm (1'') exit B&C neodymium magnet HF driver with 44 mm (1.7'') voice coil with 80°H x 50°V rotatable horn Class D amplifiers, 600WRMS to the LF and 300WRMS to the HF, switch mode power supply Frequency response from 50Hz to 20KHz DSP with 8 eq presets Control panel with XLR input and link, volume, presets, HPfilter, ground-lift 15 mm (5/8") birch plywood enclosure, scratch resistant black paint finish Eight M10 fly points, 35 mm (1.38'') speaker stand socket and two FBT design aluminium handles Ideal for live sound reinforcement applications as both front of house main PA, and as a stage monitor. Also suited for permanent installations Very lightweight, only 20Kg Specifications Configuration: 2 Way Frequency response: 50Hz-20kHz Low frequency woofer: 12" with 3" VC High frequency driver: 1" with 1.7" VC Maximum SPL cont/peak: 126/133dB Dispersion: 80 x 50 (HxV) Input impedance: 22kohm Crossover frequency: 1.5kHz Input connector: XLR with link out Net Dimension (WxHxD): 300 x 660 x 380mm Net Weight: 20kg Transport Dimension (WxHxD): 485 x 495 x 750mm Transport Weight: 22kg AC Power requirements: 640VA Built-in amplifier LF/HF: 600/300w RMS Built-in amplifier peak LF/HF: 1200/600W Power cord: 5m PowerCon
RM15,000.00
-
FBT FBT MITUS 112 12" 1200W Passive Speaker ( MITUS-112 / MITUS112 )
The FBT MITUS 112 two-way passive speaker shall incorporate 1 x 12” B&C neodymium woofer with3” voice coil and 1” exit B&C neodymium driver with 1.7” voice coil coupled to a rotatable 80° x 50° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 130°. The FBT MITUS 112 shall meet the following performance criteria: Frequency response of 55Hz to 18kHz, Frequency sensitivity of 99dB, Maximum SPL of 131dB, Recommended power amplifier 700W RMS / 8 Ohm. The FBT MITUS 112 passive speaker feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with antiresonance spacers and exclusive synthetic cloth to protect the drivers. The hi-grade passive internal crossover featuring «soft-trip» circuitry protection of the LF woofer and HF driver. Input connectors shall be parallel wired Neutrik NL4 speakon. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 112 speaker to be surface mounted on ceilings and a standard 1.38" speaker stand socket allows the FBT MITUS 112 to be mounted on speaker stands.Applications Live sound PAsystem or Live sound monitor, DJ system School and corporate audio visual sound reiforcement Background music/announcement: Restaurants, Pubs Transportation terminals, Clubs, Auditorium, Theatres Gyms, Houses of worship Features 15mm / 5/8" baltic birch plywood cabinet Recommended amplifier 700W RMS / 8 Ohm 12" B&C neodymium woofer with 3" voice coil 1" exit B&C neodymium driver with 1.7" voice coil 80° H x 50° V rotatable horn Input panel with 2 x Neutrik speakon NL-4MDV in & link SPLcapability: 131dB 12 x M10 fly points Completely Manufactured in Italy
RM10,000.00
-
FBT FBT J15A, 2-Way Active Speaker, 350W +100W RMS - Each / Pair ( J 15A / J-15A )
The FBT J15A series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBTJ15Aseries speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the FBTJ15Acabinet also allows use as a powered floor stage monitor. The FBTJ15Ais of two way design incorporating an 15" low frequency woofer and 2" HF custom compression driver coupled to a 90°H x 60°V horn. The active internal crossover is at a fixed frequency of 1.8kHz. With a frequency range of 48Hz - 20kHz the FBT J15A speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. A front face steel grille protects the speaker from external damage. Characteristics- Equipped with: 15 " and 1" speakers- Bi-amped switched-mode power supply amplifier with 350 W LF + 100 W HF RMS Class D- 48-20000 Hz- 90° x 60°- Integrated DSP with 4 switchable EQ presets- Slanted monitor angle- XLR in/out- Volume controls- 2x M10 rigging points- 35 mm Stand flange mount- Dimensions: 410 x 663 x 387 mm- Weight: 14 kg- Black plastic housing Specifications- Multifunctional Housing: Yes- Pole Mount: Yes- Flyable: Yes- Woofer size: 1x 15"- Tweeter, 1" and Larger: Yes- Weight in kg: 14,0 kg
RM6,600.00 - RM13,200.00
-
FBT FBT X LITE 112A 12" Active Loudspeaker with Bluetooth - Each / Pair ( XLITE 112A / XLITE112A )
The FBT XLITE 112A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish, the FBT XLITE 112A series speakers provide fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the FBT XLITE 112A cabinet also allows use as a powered floor stage monitor. The FBT XLITE 112A is two way design incorporating a 12” low frequency woofer and 1” HF compression driver coupled to a 90°H x 60°V constant directivity horn. With a frequency range of 50Hz - 20kHz the FBT XLITE 112A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. The bi-amplified FBT XLITE 112A active speaker feature a 1200W low frequency amp and a 300W high frequency amp. The control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two xlr inputs, stereo input, xlr output with ch1 or mix link selector, hp filter, two mic-line selectors, dsp preset selector, bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XLITE 112A speaker to be surface mounted on walls or ceilings. A standard 1.38” speaker stand socket allows the FBT XLITE 112A to be mounted on speaker stand. 2-way bi-amplified system in bass reflex Polypropylene molded enclosure Woofer custom 12” (LF) / 2,5” voice coil 1” throat / 1,4” voice coil HF compression driver 1200/300W built-in amplifier (LF/HF) Bluetooth 5.0 3-channels mixer 4 DSP presets 30° / 45° monitor taper Universal switching mode power supply 100-240 VAC M10 rigging points 4 DSP presets
RM4,700.00 - RM9,400.00
-
FBT FBT X-LITE 112 12" Passive Speaker - Each / Pair ( XLITE 112 / XLITE112 )
The FBT X-LITE 112 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBT X-LITE 112 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.The asymmetrical shape of the FBT X-LITE 112 cabinet also allows use as a floor stage monitor. The FBT X-LITE 112 is two way design incorporating an 12" low frequency woofer and 1" HF compression driver coupled to a 90°H x 60°V constant directivity horn. With a frequency range of 55Hz - 20kHz the FBT X-LITE 112 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 126.5dB.Ideal for small fixed installations the FBT X-LITE 112 speaker have an impedance of 8 Ohm and the internal crossover is at a fixed frequency of 1.8kHz. The control panel features 2 x NL4 Neutrik speakon. 4 x M10 rigging points built into the cabinet along with the optional mounting brackets allow the FBT X-LITE 112 speaker to be surface mounted on walls or ceilings. A standard 1,38" speaker stand socket allows the FBT X-LITE 112 to be mounted on speaker stand. A front face steel grille protects the speaker from external damage. RECOMMENDED AMPLIFIER:400W RMSLONG TERM POWER:200WSHORT TERM POWER:800WNOMINAL IMPEDANCE:8OhmFREQUENCY RESPONSE:55Hz - 20kHzLOW FREQUENCY WOOFER:12 - 2.5 coil inchHIGH FREQUENCY DRIVER:1 - 1.4 coil inchSENSITIVITY (@1W/1M):97dBMAXIMUM SPL CONT/PEAK:123.5 / 126.5dBDISPERSION:90° x 60° HxVCROSSOVER FREQUENCY:1.8kHzRECOMMENDED HP FILTER:HP 45Hz - 12/24dB oct.RECOMMENDED EXTERNAL FILTER:FBT DSP ProcessorINPUT CONNECTOR:2 x SpeakonNET DIMENSION (WXHXD):356 x 619 x 357 mm / 14,01 x 24,37 x 14,05 inchNET WEIGHT:16.4 Kg / 36.15 Lb
RM3,000.00 - RM6,000.00
-
FBT FBT X LITE 110A 10" Active Loudspeaker with Bluetooth - Each / Pair ( XLITE 110A / XLITE110A )
The FBT XLITE 110A series speakers with integrated 3-channel mixer feature lightweight, yet rugged gas-injected moulded polypropylene cabinet construction. Available in a black finish, the FBT XLITE 110A series speakers provide fixed installations with an elegant design that blends into any decor.The asymmetrical shape of the FBT XLITE 110A cabinet also allows for use as a powered floor stage monitor.The FBT XLITE 110A is a two-way design incorporating a 10” low-frequency woofer and 1” HF compression driver coupled to a 90°H x 60°V constant directivity horn. With a frequency range of 58Hz - 20kHz the FBT XLITE 110A speaker provides high-fidelity sound for speech and music applications with a maximum SPL of 127dB.The bi-amplified FBT XLITE 110A active speaker features a 1200W low-frequency and 300W high-frequency amp. The control panel features a three-channel mixer with two micro-line inputs, stereo input and a dedicated channel for Bluetooth 5.0; two XLR inputs, stereo input, XLR output with ch1 or mix link selector, HP filter, two mic-line selectors, DSP preset selector, Bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XLITE 110A speaker to be surface mounted on walls or ceilings.A standard 35mm speaker stand socket allows the FBT XLITE 110A to be mounted on a speaker stand KEY FEATURES2-way bi-amplified bass reflex systemPolypropylene moulded enclosureCustom 10" woofer (LF) / 2.5" voice coil1" throat / 1.4" voice coil HF compression driver1200w / 300w Built-In amplifier (LF / HF)Bluetooth 5.03-Channel mixer4 DSP Presets30 degrees & 45 degrees monitor tapersUniversal switch mode power supply 100-240 VACM10 rigging points SPECIFICATIONS Configuration: - 2 WayFrequency response: - 58Hz - 20KHzLow-frequency woofer: - 10" - 2.5" VCHigh-frequency driver: - 1" - 1.4" VCMaximum SPL cont/peak: - 123/127 dBDispersion: - 90 x 60Input impedance: - 22Input connector: - XLR IN/OUTNet Dimension (WxHxD): - 300 x 536 x 301.5Net Weight: - 13 KGTransport Dimension (WxHxD): - 370 x 615 x 380Transport Weight: - 14.8 KGBuilt-in amplifier peak: - LF 1200w HF 300w
RM3,800.00 - RM7,600.00
-
FBT FBT MITUS 212FS 2x12" 1000W Passive Line Array Subwoofer ( MITUS-212FS / MITUS212FS )
The FBT MITUS 212FS is a 2 x 12" compact and flyable passive speaker which can extend the low frequencies of the MITUS 206L when combined together in ground-stacked or flying arrays.The modularity of the FBT MITUS 212FS makes it extremely flexible for a wide range of applications, from a small system to an elaborate line array system consisting of up to 12 MITUS 206L cabinets along with multiple FBT MITUS 212FS subs for large concert events. The FBT MITUS 212FS shall meet the following performance criteria: Frequency response of 50Hz to 250Hz,Frequency sensitivity of 99dB, Maximum SPL of 134dB continuous and 138dB peak, Recommended power amplifier 1000W RMS/8 Ohm. The MITUS 212FS feature Baltic birch plywood construction covered in a scratch resistant black paint with a M20 top-mounted stand adapter. Input connectors shall be parallel wired Neutrik NL4 speakon.Application Permanent installations in: Theatres, Concert Halls, Clubs, Places of Worship, Conference Rooms, Indoor Sports, Arenas & Stadiums Sound reinforcement for live events: Touring, Bands, Orchestras Features 15mm / 5.8" birch plywood enclosure Recommended amplifier 1000W RMS/8 Ohm 320mm/2x12" B&C neodymium magnet with 75mm/3" coil Frequency response 50Hz - 250Hz Input panel with Neutrik speakon NL-4MDV in & link connectors SPL capability 138dB Wide range of hardware accessories for flying and ground stacked configurations External digital processor required Completely Manufactured in Italy
RM17,000.00
-
FBT FBT Mitus 218SA Processed Active Subwoofer ( Mitus-218SA / Mitus218SA )
The FBT Mitus 218SA Active Subwoofer is an Active 2x B&C 18 inch with 4 inch voice coil large vented bass-reflex subwoofer which is the perfect low-frequency extension for the MITUS range with built in amplification delivering 2000W RMS and a 145dB SPL. The FBT MITUS 218SA shall meet the following performance criteria: Frequency response of 30Hz to 100Hz, Maximum SPL of 145dB peak,Class D amplifier 2000W RMS. The FBT MITUS 218SA provides a DSP with 6 presets-cardioid and infra configurations. The FBT MITUS 218SA feature 0.70 inch Baltic birch plywood construction covered in a scratch resistant black paint with M20 top-mounted stand adapter and six FBT design aluminium handles. The control panel provides XLR in &link, volume control, preset, delay, phase 0°-180°, 3 status led indicators. Features- Large vented bass-reflex subwoofer- 2 x 460mm (18 inch) custom B&C high excursion subwoofers with 100mm (3.9 inch) coil- Frequency Response from 30Hz to 100Hz- Class D amplifiers delivering 2000Wrms with switch mode power supply- DSP with 6 EQ presets, cardioids and infra configurations, delay- 18mm (¾ inch) birch plywood enclosure, textured scratch resistant black paint- Six FBT design aluminum handles- Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base.- M20 top mount stand socket- Optional 4 swivel mount casters 100 mm (4 inch) on request- Control panel with XLR input and link, volume, presets, delay, phase 0°- 180°, groundlift
RM41,600.00
-
FBT FBT X-LITE 110 10" Passive Speaker - Each / Pair ( XLITE 110 / XLITE110 )
The FBT X-LITE 110 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBT X-LITE 110 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the FBT X-LITE 110 cabinet also allows use as a floor stage monitor. The FBT X-LITE 110 is two way design incorporating an 10" low frequency woofer and 1" HF compression driver coupled to a 90°H x 60°V constant directivity horn. With a frequency range of 65Hz - 20kHz the FBT X-LITE 110 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 124dB. Ideal for small fixed installations the FBT X-LITE 110 speaker have an impedance of 8 Ohm and the internal crossover is at a fixed frequency of 2kHz. The control panel features 2 x NL4 Neutrik speakon. 4 x M10 rigging points built into the cabinet along with the optional mounting brackets allow the FBT X-LITE 110 speaker to be surface mounted on walls or ceilings. A standard 1,38" speaker stand socket allows the FBT X-LITE 110 to be mounted on speaker stand. A front face steel grille protects the speaker from external damage. RECOMMENDED AMPLIFIER:350W RMSLONG TERM POWER:175WSHORT TERM POWER:700WNOMINAL IMPEDANCE:8OhmFREQUENCY RESPONSE:65Hz - 20kHzLOW FREQUENCY WOOFER:10 - 2.5 coil inchHIGH FREQUENCY DRIVER:1 - 1.4 coil inchSENSITIVITY (@1W/1M):96dBMAXIMUM SPL CONT/PEAK:121 / 124dBDISPERSION:90° x 60° HxVCROSSOVER FREQUENCY:2kHzRECOMMENDED HP FILTER:HP 55Hz - 12/24 dB oct.RECOMMENDED EXTERNAL FILTER:FBT DSP ProcessorINPUT CONNECTOR:2 x SpeakonNET DIMENSION (WXHXD):300 x 536 x 301,5 mm / 11,81 x 21,10 x 11,87 inchNET WEIGHT:14,5 Kg / 31,96 Lb
RM2,500.00 - RM5,000.00
-
FBT FBT MITUS 212FSA 2x12" 2400W Powered Line Array Subwoofer ( MITUS-212FSA / MITUS212FSA )
The FBT MITUS 212FS is a 2 x 12" compact and flyable powered speaker which can extend the low frequencies of the MITUS 206L when combined together in ground-stacked or flying arrays.The modularity of the FBT MITUS 212FS makes it extremely flexible for a wide range of applications, from a small system to an elaborate line array system consisting of up to 12 MITUS 206L cabinets along with multiple FBT MITUS 212FS subs for large concert events.The FBT MITUS 212FS shall meet the following performance criteria: Frequency response of 50Hz to 250Hz,Frequency sensitivity of 99dB, Maximum SPL of 134dB continuous and 138dB peak, Recommended power amplifier 1000W RMS/8 Ohm. The MITUS 212FS feature Baltic birch plywood construction covered in a scratch resistant black paint with a M20 top-mounted stand adapter.Input connectors shall be parallel wired Neutrik NL4 speakon.KEY FEATURES Passive version, recommended amplifier of 1000Wrms / 8ohm Compact vented band pass subwoofer sharing the same width and hardware suspension of the MITUS 206L 320 mm (2 x 12’’) B&C neodymium magnet high excursion subwoofers with 75 mm (3’’) voice coils Frequency Response from 50Hz to 120Hz Neutrik Speakon NL- 4MDV connectors IN & LINK OUT External digital processor requied 15 mm (5/8’’) birch plywood enclosure, scratch resistant black paint Low frequency extension cabinet for the MITUS 206L line array for flying or ground stacked configurations. M20 top mount stand socket
RM20,000.00
-
FBT FBT MITUS 210MA 10" 1200W Powered Floor Monitor Speaker ( MITUS-210MA / MITUS210MA )
The FBT MITUS 210MA bi-amplified powered speaker is made of 0.59" birch plywood; the front is protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers, and the cabinet exterior is protected by a rugged touring grade scratch resistant black paint finish.The FBT MITUS 210MA is a two-way coaxial design with 2x 10" B&C unique neodymium magnet coaxial speakers with 2.5" voice coils, a class D built-in amplifier with 600W RMS to the LF and 300W RMS to the HF, and a switch mode power supply.The FBT MITUS 210MA features an 8-selectable preset DSP with A/D-D/A low noise converters.The FBT MITUS 210MA must meet the following requirements: 60Hz to 20kHz frequency response, 132dB maximum SPL, 8 Ohm LF / 8 Ohm HF nominal impedance XLR «in&link», volume, preset, HP filter, and GND raise switch are all available on the control panel.The FBT MITUS 210MA can be mounted on a speaker stand using a standard 1.38" speaker stand socket.KEY FEATURES 2-way bi-amplified, bass-reflex design with coaxial driver 2 x 250 mm (2 x 10’’) B&C custom neodymium magnet speakers with 64 mm (2.5’’) voice coil, one of them is coaxial with 36 mm (1.4’’) exit titanium compression driver and 64 mm (2.5’’) voice coil Frequency response from 60Hz to 20KHz Class D built-in amplifiers, 600WRMS to the LF and 300WRMS to the HF with switch mode power supply DSP with 8 eq presets Control panel with XLR input and link, volume, presets, HP-filter, ground-lift 70° conical dispersion 15 mm (5/8”) birch plywood enclosure, scratch resistant black paint finish 35 mm (1.38’’) stand socket and back side carrying handle Ideal for live sound stage monitoring applications, as well as a front of house main PA speaker Very lightweight, only 19Kg
RM17,000.00
-
FBT FBT MITUS 206LA 2x6.5" 1200W Powered Line Array Speaker ( MITUS-206LA / MITUS206LA )
The FBT MITUS 206LA is a two-way design incorporating 2 x 6.5” B&C neodymium woofers with1.7” voice coil and 1.4” exit B&C neodymium driver with 2.5” voice coil. The modularity of this powered speaker makes it extremely flexible for a wide range of applications, from a small 2 cabinet P.A. system to an elaborate line array system consisting of up to 12 MITUS 206LA cabinets along with multiple FBT MITUS 212FSA subs for large concert events.The FBT MITUS 206LA shall meet the following performance criteria: Frequency response of 68Hz to 20kHz, Maximum SPLof 134dB, class D amplifier module that provides 600W RMS to the LF and 300W RMS to the HF. The waveguide, optimized by BEM finite element simulation, offers 100° horizontal dispersion; engineered to be perfectly integrated with the HF compression driver it allows the dispersion of a flat acoustic wave to over 18kHz.The MITUS 206LA cabinets coupling hardware is internally integrated and allows the suspension of 12 arrays with a 10:1 safety factor. The front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers. The FBT MITUS 206LA provides a wide range of hardware accessories for flying and ground stacked configurations.Compact 2-way, bi-amplified bass-reflex design 2 x 6.5'' (165 mm) B&C neodymium woofers with 1.7'' (44 mm) coil 1.4'' (36 mm) exit B&C neodymium driver with 2.5'' (64 mm) coil Frequency response from 68Hz to 20KHz Latest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude shading Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift 100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz High impact polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0° to 10° angle between cabinets at 2° step Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line array, the MITUS 206LA maybe used also in outdoor applications where the system is not directly exposed to the elements Wide range of hardware accessories for flying and ground stacked configurations Very lightweight, only 14Kg
RM16,000.00
-
FBT FBT MITUS 210M 10" 1600W Passive Floor Monitor Speaker ( MITUS-210M / MITUS210M )
The FBT MITUS 210M two-way passive speaker shall incorporate 1 x 10” B&C custom neodymium magnet coaxial speaker with2.5” voice coil and 1.4” exit titanium compression driver with 2.5” voice coil (70° conical dispersion); B&C custom 10" neodymium magnet woofer with 2.5" voice coil. The FBT MITUS 210M shall meet the following performance criteria: Frequency response of 65Hz to 20kHz, Frequency sensitivity of 100dB , Maximum SPL of 132dB, Recommended power amplifier 800W RMS/8 Ohm. Hi-grade passive internal crossover featuring «soft-trip» circuitry protection of low frequencies and high frequencies. The front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers and a rugged touring grade scratch resistant black paint finish protects the cabinet exterior. Input connectors shall be parallel wired Neutrik NL4 speakon. The FBT MITUS 210M feature 5/8" birch plywood construction and a 1.38" stand socket allows the FBT MITUS 210M to be mounted on speaker stand. Applications Live sound reinforcement floor monitor Touring systems, Clubs, Auditoriums, Theatres Houses of worship, D.J. booth monitor Features 2-way bass reflex design with coaxial driver Recommended amplifier 800W RMS / 8Ohm 1 x 10" B&C custom neodymium magnet coaxial speaker with 2.5" voice coil 1.4" exit titanium compression driver with 2.5" voice coil B&C custom 10" neodymium magnet woofer with 2.5 voice coil 70° conical dispersion Input panel with 2 x Neutrik speakon NL-4MDV in & link SPL capability 132dB 5/8" birch plywood enclosure 1.38" stand socket Completely Manufactured in Italy
RM12,000.00
-
FBT FBT MITUS 206L 2x6.5" 1000W Passive Line Array Speaker ( MITUS-206L / MITUS206L )
The FBT MITUS 206L two-way compact line line array system shall incorporate 2 x 6.5” B&C neodymium woofers with1.7” voice coil and 1.4” exit B&C neodymium driver with 2.5” voice coil. The modularity of the this passive speaker makes it extremely flexible for a wide range of applications, from a small 2 cabinet P.A. system to an elaborate line array system consisting of up to 12 MITUS 206L cabinets along with multiple FBT MITUS 212FS subs for large concert events. The FBT MITUS 206L shall meet the following performance criteria: Frequency response of 75Hz to 20kHz,Frequency sensitivity of 97dB LF / 108dB HF, Maximum SPL of 129dB for LF and 133dB for HF, Recommended power amplifier 500W RMS/16 Ohm LF and 150W RMS/16 Ohm HF. The waveguide, optimized by BEM finite element simulation, offers 100° horizontal dispersion; engineered to be perfectly integrated with the HF compression driver it allows the dispersion of a flat acoustic wave to over 18kHz. The system shall not include an internal passive crossover. The front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers. Input connectors shall be parallel wired Neutrik NL4 speakon. Polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0° to 10° angle betwee cabinets at 2° step for flying and ground stacked configurationsApplications Permanent installations in: Theatres, Concert Halls, Clubs, Places of Worship, Conference Rooms, Indoor Sports, Arenas & Stadiums Sound reinforcement for live events: Touring, Bands, Orchestras Features High impact polypropylene gas-injected enclosure Recommended amplifier 500W RMS/16 Ohm LF and 150W RMS/16 Ohm HF 2 x 6.5” B&C neodymium woofers with 1.7" coil 1.4" exit B&C neodymium driver with 2.5"coil 100° horizontal waveguide Input panel with 2 x Neutrik speakon NL-4MDV in & link SPLcapability: 129dB LF / 133dB HF Wide range of hardware accessories for flying and ground stacked configurations Completely Manufactured in Italy
RM13,000.00
-
FBT FBT MITUS 118S 18" 1000W Passive Subwoofer ( MITUS-118S / MITUS118S )
The FBT MITUS 118S, 18" compact vented band-pass passive speaker is the perfect low-frequency extension for the MITUS range and the ideal companion for the FBT MITUS 206L line array for ground stack applications with optional metal base. The FBT MITUS118S shall meet the following performance criteria: Frequency response of 36Hz to 200Hz,Frequency sensitivity of 101dB, Maximum SPL of 138dB peak, Recommended power amplifier 1000W RMS/4 Ohm. The FBT MITUS 118S feature 0.70" Baltic birch plywood construction covered in a scratch resistant black paint with a M20 top-mounted stand adapter and two FBT design aluminium handles. The rear facing input panel provides 2 Neutrik NL4 speakon female connectors.Features 18mm / 0.70" birch plywood enclosure Recommended amplifier 1000W RMS/4 Ohm 460mm/18" custom B&C neodymium magnet with 75mm/3" coil Frequency response 36Hz - 200Hz Input panel with Neutrik speakon NL-4MDV in & link connectors SPLcapability 138dB 4 swivel mount casters 3.15" on request External digital processor required Completely Manufactured in Italy
RM14,000.00
-
FBT FBT MITUS 115A 15" 1200W Powered Speaker ( MITUS-115A / MITUS115A )
The MITUS sound reinforcement series is the result of FBT's experience and passion for excellence. A comprehensive range of 2-way speakers for FOH applications, subwoofers, stage monitor and line arrays in passive and bi-amplified designs. Whether in live or touring applications or in permanent installations, they will be appreciated by any musicians and professionals looking for the finest sound quality. The whole MITUS series is equipped with:-High quality B&C neodymium magnet woofers custom manufactured for FBT-The latest generation of B&C compression drivers-High efficiency class D power amp modules with switch mode power supplies fixed to a die-cast aluminum chassis-DSP with A/D - D/A low noise converters-Neutrik Powercon IN & LINK out power receptacles-Awide range of accessories makes the MITUS range extremely flexible for live or permanent installations-New aluminum die-cast carrying handles-Heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth 2-way, bi-amplified, bass-reflex design 380 mm (15”) B&C neodymium magnet woofer with 75 mm (3”) voice coil 25 mm (1”) exit B&C neodymium magnet HF driver with 44 mm (1.7’’) voice coil with 80°H x 50°V rotatable horn Class D built-in amplifiers, 600WRMS to the LF and 300WRMS to the HF, switch mode power supply Frequency response from 46Hz to 20KHz DSP with 8 eq presets Control panel with XLR input and link, volume, presets, HP-filter, ground-lift 15 mm (5/8”) birch plywood enclosure, scratch resistant black paint finish Eight M10 fly points, 35 mm (1.38’’) speaker stand socket and two FBT design aluminium handles Ideal for live sound reinforcement applications as front of house main PA. Also suited for permanent installations Very lightweight, only 28Kg
RM17,000.00
-
FBT FBT MITUS 118SA 18" 2400W Powered Subwoofer ( MITUS-118SA / MITUS118SA )
The FBT MITUS 118SA, 18" compact vented band-pass powered speaker is the perfect low-frequency extension for the MITUS range and the ideal companion for the FBT MITUS 206LA line array for ground stack applications with optional metal base.The FBT MITUS118SA shall meet the following performance criteria: Frequency response of 36Hz to 100Hz, Maximum SPL of 139dB peak,Class D amplifier 1200W RMS.The FBT MITUS 118SA provides a DSP with 8 presets-cardioid and infra configurations.The FBT MITUS 118SA feature 0.70" Baltic birch plywood construction covered in a scratch resistant black paint with eight M10 fly points, M20 top-mounted stand adapter and two FBT design aluminium handles.The control panel provides XLR in &link, volume control, preset, delay, phase 0°-180°, GND lift. Features Compact vented band pass subwoofer design enclosure 460 mm (18’’) custom B&C neodymium magnet high excursion woofer with 75 mm (3’’) voice coil Frequency response from 36Hz to 100Hz Class D amplifier delivering 1200WRMS Switch mode power supply DSP with 8 presets, cardioids and infra configurations, delay Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, groundlift 18 mm (3/4’’) birch plywood enclosure, scratch resistant black paint Eight M10 fly points, M20 top mount stand socket and two FBT design aluminum handles Optional 4 swivel-mount casters 80 mm (3.15’’) on request Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base
RM21,600.00
-
FBT FBT J5T 5 Inch Passive Speaker, 50W @ 16 Ohms Or 100V Line - White - Each / Pair ( J-5T / J 5T )
Sound Reinforcement MonitorThe FBT J5T series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J5T series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J5T speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor. The FBT J5 is of two way design incorporating an 5" low frequency woofer and 1" HF custom compression driver.Cabinet dispersion is 90?H x 90?V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 3.5kHz.With a frequency range of 90Hz - 20kHz the FBT J5T speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 114dB. A front face steel grille protects the speaker from external damage.Ideal for fixed installations where numerous speakers are required, the FBT J5T have a switchable 70V/100V transformer with selectable power taps at 50W, 25W, 12.5W, 3W, by the means of a 4 position rotary switch on the rear of the speaker cabinet. The two M6 fly points built into the cabinets along with the optional mounting brackets allow the FBT J5T speakers to be surface mounted on walls or ceiling. For portable or fixed use the FBT J5T speakers can be mounted on mic stands by using the optional adapters for vertical mounting.Rear panel connections feature push pin terminal strips for bare wire connection. FeaturesKEY FEATURES2-way passive sound reinforcement systemPolypropylene enclosure1 x 5" custom woofer1 x 1" neodymium silk dome tweeter50W (70/100V) RMS recommended amplifier25W long term power100W short term power IEC 268-52 x M6 suspension pointsInternal passive crossover filterInput panel with jack and terminal connectorAvailable in white colourCompletely manufactured in Italy80 Hz @ 24dB/Oct recommended High pass filterAPPLICATIONHouses of WorshipSchool & corporate audio visual sound reinforcementBackground music announcement: restaurants, pubsTransportation terminalsClubsAuditoriumsTheatres SpecificationConfiguration:2 WayFrequency response:90Hz - 20kHzLow frequency woofer:5" with 1" VCHigh frequency driver:1" Dome TweeterMaximum SPL cont/peak:111dB / 114dB SPLDispersion:90 x 90 (HxV)Input impedance:16 OhmCrossover frequency:3.5kHzInput connector:Push terminal connectorsNet Dimension (WxHxD):170 x 275 x 180mm / 6.69 x 10.82 x 7.08inNet Weight:3.4kg / 7.49lbTransport Dimension (WxHxD):240 x 345 x 235mm / 9.44 x 13.58 x 9.25inTransport Weight:4.2kg / 9.25lb
RM2,000.00 - RM4,000.00
-
FBT FBT J5T 5 Inch Passive Speaker, 50W @ 16 Ohms Or 100V Line - Black - Each / Pair ( J-5T / J 5T )
Sound Reinforcement MonitorThe FBT J5T series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J5T series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J5T speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor. The FBT J5 is of two way design incorporating an 5" low frequency woofer and 1" HF custom compression driver.Cabinet dispersion is 90?H x 90?V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 3.5kHz.With a frequency range of 90Hz - 20kHz the FBT J5T speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 114dB. A front face steel grille protects the speaker from external damage.Ideal for fixed installations where numerous speakers are required, the FBT J5T have a switchable 70V/100V transformer with selectable power taps at 50W, 25W, 12.5W, 3W, by the means of a 4 position rotary switch on the rear of the speaker cabinet. The two M6 fly points built into the cabinets along with the optional mounting brackets allow the FBT J5T speakers to be surface mounted on walls or ceiling. For portable or fixed use the FBT J5T speakers can be mounted on mic stands by using the optional adapters for vertical mounting.Rear panel connections feature push pin terminal strips for bare wire connection. FeaturesKEY FEATURES2-way passive sound reinforcement systemPolypropylene enclosure1 x 5" custom woofer1 x 1" neodymium silk dome tweeter50W (70/100V) RMS recommended amplifier25W long term power100W short term power IEC 268-52 x M6 suspension pointsInternal passive crossover filterInput panel with jack and terminal connectorAvailable in white colourCompletely manufactured in Italy80 Hz @ 24dB/Oct recommended High pass filterAPPLICATIONHouses of WorshipSchool & corporate audio visual sound reinforcementBackground music announcement: restaurants, pubsTransportation terminalsClubsAuditoriumsTheatres SpecificationConfiguration:2 WayFrequency response:90Hz - 20kHzLow frequency woofer:5" with 1" VCHigh frequency driver:1" Dome TweeterMaximum SPL cont/peak:111dB / 114dB SPLDispersion:90 x 90 (HxV)Input impedance:16 OhmCrossover frequency:3.5kHzInput connector:Push terminal connectorsNet Dimension (WxHxD):170 x 275 x 180mm / 6.69 x 10.82 x 7.08inNet Weight:3.4kg / 7.49lbTransport Dimension (WxHxD):240 x 345 x 235mm / 9.44 x 13.58 x 9.25inTransport Weight:4.2kg / 9.25lb
RM2,000.00 - RM4,000.00
-
FBT FBT J 5A Processed Active Monitor Speaker 80W + 40W RMS - Black - Each / Pair ( J5A / J-5A )
The black J 5A Processed Active Monitor from FBT is a two-way 5" 80W+40W RMS professional speaker with a 1" neodymium silk dome tweeter. It can be used in various environments for applications such as theater, clubs, gyms, bars, and more. It features a frequency response of 80 Hz to 20 kHz and is designed with an on-board analog signal processor and limiter to protect the monitor from overloads during performance. The built-in class D amplifier for the J 5A uses 80W RMS for the low frequency driver and 40W RMS for the 1" high frequency driver. The 2-way bass-reflex speaker is built with two M6 suspension points for attaching to a wall. An AC power cord is included. Features a 5" (130mm) woofer with improved efficiency and linearity with a 1" (25mm) neodymium silk dome tweeterLow noise toroidal transformer power supply
RM2,800.00 - RM5,600.00
-
FBT FBT J5 5 inch Passive Speaker, 80W @ 16 Ohms - Each / Pair - Black ( J5 / J5 )
The FBT J5 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J5 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J5 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor. The FBT J5 is of two way design incorporating an 5" low frequency woofer and 1" HF custom compression driver. Cabinet dispersion is 90°H x 90°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 3.5kHz. With a frequency range of 90Hz - 20kHz the FBT J5 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 117dB. A front face steel grille protects the speaker from external damage. Ideal for small fixed installations the FBT J5 speaker system have an impedance of 16 Ohm allowing four FBT J5 speakers to be utilised per channel, for a total of eight J5 speakers when used with a stereo power amplifier capable of operating at 4 Ohm. The two M6 fly points built into the cabinets along with the optional mounting brackets allow the FBT J5 speakers to be surface mounted on walls or ceiling. For portable or fixed use the FBT J5 speakers can be mounted on mic stands by using the optional adapters for vertical mounting. Rear panel connections feature both a female 1/4" input jack and push pin terminal connectors which are internally connected in parallel providing various wiring options for the installer. 2-way passive sound reinforcement system Polypropylene enclosure 1 x 5" custom woofer 1 x 1" neodymium silk dome tweeter 80W RMS recommended amplifier 40W long term power 160W short term power IEC 268-5 2 x M6 suspension points Internal passive crossover filter Input panel with jack and terminal connector Available in white color Completely manufactured in Italy
RM1,400.00 - RM2,800.00
-
FBT FBT J 5A Processed Active Monitor Speaker 80W + 40W RMS - White - Each / Pair ( J5A / J-5A )
The black J 5A Processed Active Monitor from FBT is a two-way 5" 80W+40W RMS professional speaker with a 1" neodymium silk dome tweeter. It can be used in various environments for applications such as theater, clubs, gyms, bars, and more. It features a frequency response of 80 Hz to 20 kHz and is designed with an on-board analog signal processor and limiter to protect the monitor from overloads during performance. The built-in class D amplifier for the J 5A uses 80W RMS for the low frequency driver and 40W RMS for the 1" high frequency driver. The 2-way bass-reflex speaker is built with two M6 suspension points for attaching to a wall. An AC power cord is included. Features a 5" (130mm) woofer with improved efficiency and linearity with a 1" (25mm) neodymium silk dome tweeterLow noise toroidal transformer power supply
RM2,800.00 - RM5,600.00
-
FBT FBT J15 15 inch Passive Speaker, 300W @ 8 Ohms - Each / Pair ( J 15 / J-15 )
The FBT J15 15 inch Passive Speaker is a passive speaker featuring a 15 inch Driver and a 1 inch Compression driver, this italian made speaker features a rugged gas injected molded polypropylene cabinet and Speakon connections. The FBT J15 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J15 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J15 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor. The FBT J15 is of two way design incorporating an 15 inch low frequency woofer and 1 inch HF custom driver. Cabinet dispersion is 90°H x 60°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 1.8kHz. With a frequency range of 50Hz - 20kHz the FBT J15 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 127dB. A front face steel grille protects the speaker from external damage. Ideal for fixed installations the FBT J15 speaker system have an impedance of 8 Ohm. The two M10 fly points built into the cabinets along with the optional mounting brackets allow the FBT J15 speakers to be surface mounted on walls or ceiling. For portable or fixed use the FBT J15 speakers can be mounted on mic stands by using the optional adapters for vertical mounting. Rear panel connections feature 2 x Neutrik Speakon NL4. Features- 2-way passive sound reinforcement system- Polypropylene enclosure- 1 x 15 inch custom woofer- 1 x 1 inch high frequency driver- 300W RMS recommended amplifier- 150W long term power- 600W short term power IEC 268-5- 2 x M10 suspension points- Internal passive crossover filter- Input panel with 2 x Speakon NL4- Available in white color- Completely manufactured in Italy- 99dB Sensitivity
RM4,000.00 - RM8,000.00
-
FBT FBT J 12A Processed Active Monitor Speaker 300W +100W RMS - Each / Pair ( J12A / J-12A )
The J 12A Processed Active Monitor from FBT is a two-way 12" 350W+100W RMS professional speaker with 4 DSP presets. It can be used in various environments for applications such as live stage, theater, clubs, gyms, bars, and more. It features a frequency response of 50 Hz to 20 kHz and is designed with an on-board digital signal processor to adjust the dynamic range and to protect high SPL during performance.The built-in class D amplifier for the J 12A uses 350W RMS for the low frequency driver and 100W RMS for the 1" high frequency driver. The polypropylene enclosure houses the 2-way bass-reflex speaker and also the 90 x 60° directivity horn. The speaker is built with two M10 anchoring points for attaching to a wall and has a built-in integrated carry handle. An AC power cable is included.The asymmetrical shape of the FBT J12A cabinet also allows use as a powered floor stage monitorHigh efficiency switch mode power supplyFeatures a 12" (305 mm) woofer with improved efficiency and linearity with a 1" (25mm) HF compression driverOn-board digital signal processing with protection for high SPL and high reliability during performance4 DSP presets for maximum acoustical flexibilityPolypropylene enclosure with integrated handles2x M10 anchoring points
RM6,200.00 - RM12,400.00
-
FBT FBT J12 12 Inch Passive Speaker, 300w @ 8 Ohms - Each / Pair ( J 12 / J-12 )
Product DescriptionThe FBT J12 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBT J12 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J12 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor. The FBT J12 is of two way design incorporating an 12" low frequency woofer and 1" HF custom driver. Cabinet dispersion is 90°H x 60°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 2kHz. With a frequency range of 55Hz - 20kHz the FBT J12 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 127dB. A front face steel grille protects the speaker from external damage. Ideal for fixed installations the FBT J12 speaker system have an impedance of 8 Ohm. The two M10 fly points built into the cabinets along with the optional mounting brackets allow the FBT J12 speakers to be surface mounted on walls or ceiling. For portable or fixed use the FBT J12 speakers can be mounted on mic stands by using the optional adapters for vertical mounting. Rear panel connections feature 2 x Neutrik Speakon NL4.Features:Key Features: 2-way passive sound reinforcement system Polypropylene enclosure 1 x 12" custom woofer 1 x 1" high frequency driver 300W RMS recommended amplifier 150W long term power 600W short term power IEC 268-5 2 x M10 suspension points Internal passive crossover filter Input panel with 2 x Speakon NL4 Completely manufactured in Italy
RM3,500.00 - RM7,000.00
-
FBT FBT J8 Passive 160Wrms Loud Speaker - Each / Pair - White ( J 8 / J-8 )
The FBT J8 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J8 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J8 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor. The FBT J8 is of two way design incorporating an 8" low frequency woofer and 1" HF custom compression driver. Cabinet dispersion is 90°H x 60°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 2.5kHz. With a frequency range of 65Hz - 20kHz the FBT J8 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 121.5dB. FEATURES 2-way passive sound reinforcement system Polypropylene enclosure 1 x 8" custom woofer 1 x 1" high frequency driver 160W RMS recommended amplifier 80W long term power 320W short term power IEC 268-5 2 x M6 suspension points Internal passive crossover filter Input panel with 2xSpeakon NL4 Available in white colour Completely manufactured in Italy 96.5dB Sensitivity
RM2,400.00
-
FBT FBT J8 Passive 160Wrms Loud Speaker - Each / Pair - Black ( J 8 / J-8 )
The FBT J8 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J8 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J8 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor. The FBT J8 is of two way design incorporating an 8" low frequency woofer and 1" HF custom compression driver. Cabinet dispersion is 90°H x 60°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 2.5kHz. With a frequency range of 65Hz - 20kHz the FBT J8 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 121.5dB. FEATURES 2-way passive sound reinforcement system Polypropylene enclosure 1 x 8" custom woofer 1 x 1" high frequency driver 160W RMS recommended amplifier 80W long term power 320W short term power IEC 268-5 2 x M6 suspension points Internal passive crossover filter Input panel with 2xSpeakon NL4 Available in white colour Completely manufactured in Italy 96.5dB Sensitivity
RM2,400.00 - RM4,800.00
-
FBT FBT J5 5 inch Passive Speaker, 80W @ 16 Ohms - Each / Pair - White ( J5 / J5 )
The FBT J5 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J5 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J5 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor. The FBT J5 is of two way design incorporating an 5" low frequency woofer and 1" HF custom compression driver. Cabinet dispersion is 90°H x 90°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 3.5kHz. With a frequency range of 90Hz - 20kHz the FBT J5 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 117dB. A front face steel grille protects the speaker from external damage. Ideal for small fixed installations the FBT J5 speaker system have an impedance of 16 Ohm allowing four FBT J5 speakers to be utilised per channel, for a total of eight J5 speakers when used with a stereo power amplifier capable of operating at 4 Ohm. The two M6 fly points built into the cabinets along with the optional mounting brackets allow the FBT J5 speakers to be surface mounted on walls or ceiling. For portable or fixed use the FBT J5 speakers can be mounted on mic stands by using the optional adapters for vertical mounting. Rear panel connections feature both a female 1/4" input jack and push pin terminal connectors which are internally connected in parallel providing various wiring options for the installer. 2-way passive sound reinforcement system Polypropylene enclosure 1 x 5" custom woofer 1 x 1" neodymium silk dome tweeter 80W RMS recommended amplifier 40W long term power 160W short term power IEC 268-5 2 x M6 suspension points Internal passive crossover filter Input panel with jack and terminal connector Available in white color Completely manufactured in Italy
RM1,400.00 - RM2,800.00
-
Fender Fender Rumble 410 V3 Bass Speaker Cabinet
For bassists everywhere at all levels who prize a great-sounding 4x10" enclosure with textbook Fender punch, power and clarity, the Rumble 410 Cabinet delivers all that plus great affordability. Re-voiced from previous versions to produce superior tonal detail and low-frequency translation, it also features Eminence® speakers, a premium high-end compression horn and Fender's magnetic Rumble head-attachment system, which magnetically holds the Rumble 200 and 500 heads securely in place atop it for a perfect pairing. Specifications: Speakers: 10" Eminence® Ceramic Magnet Speakers Total Impedance: 8 ohms Dimensions: 23" (58.42cm) W x 14.5" (36.83cm) D x 25" (63.5cm) H Weight: 62.5 lbs. (28.35 kg)
RM3,299.00
-
Fender Fender Compact Speaker Stands With Bag
Addressing the demands of live sound hobbyists and professionals alike, we’ve designed a lightweight aluminium, durable yet easily portable stand to complement your portable PA system. A folding tripod base allows for quick setup and breakdown, while an included nylon carrying bag with a shoulder strap and carrying handles makes it a breeze to load in and out in style. Fatures: Two compact speaker stands with nylon carrying bag 1 3/8” upper shaft with 1 1/2” adapter included Lightweight aluminium construction Height adjustment: 37”–60” Weight capacity: 60 lbs. each For use with Passport® speakers or any speaker with a pole-mount adapter
RM609.00
-
Fender Fender The Pinwheel Rotary Speaker Emulator Guitar Effects Pedal
A classic sound achieved with an organ speaker and amplifier, rotary speaker effects have become an integral part of modern music. Featuring three different rotary speaker voices, including our very own Vibratone effect, The Pinwheel makes it easy to add this swirling sound to your tonal toolbox. Switchable Slow and Fast speeds let you spin up the perfect sound for your music, while the onboard Overdrive adds some texture to your tone. The Sensitivity control allows modulation rate changes based on your playing dynamics—dig in and the effect gets more intense. FEATURES Rotary speaker pedal Switchable Slow/Fast speeds Onboard overdrive; dynamically responsive modulation rate Stereo inputs and outputs Selectable guitar and keyboard voicings Power Requirements: 9-Volt DC Negative AC Adaptor
RM1,319.00
-
Fender Fender Mini Tone Master 1watt 2x2inch Mini Amp Combo Electric Guitar Speaker Amplifier (Battery Powered)
This miniaturized version of the Tone-Master boasts glorious tone for its size, along with authentic looks to match. This portable mini amp features classic details reminiscent of the original Tone-Master, from metal amp corners to vintage-style brown grille cloth and white knobs. FEATURES One-watt single-channel amplifier Genuine vintage styling Dual 2" speakers Dedicated tone, volume and gain controls 1/4" headphone jack and 9V adapter jack
RM209.00
-
Fender Fender Audio Elie 12 120 Watt 4 Channel Portable Bluetooth Speaker with Built In Battery - White ( ELIE12 ELIE-12 )
SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA- Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option 'Standard Delivery' and all orders will be shipped out on timely manner.*Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A,Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6Specifications :Sound Pressure Level (SPL) : 101dB @ 1mSpeaker Configuration : 2 x Full-range drivers, 2 x Tweeters, 2 x SubwoofersMax Power Output : 120WBattery Life : 15 hoursQuick Charging : 15 minutes = 2 hours of playtimeWired & Wireless Inputs : 1 x XLR Combo & Bluetooth® / 2 x Ultra Low LatencyOutput : 3.5mm AUXWeight : 8.75 pounds (3970g)Bluetooth® Version : 5.3 (SBC, AAC, LC3)DSP Technology : MaxxAudio, MaxxBassSpatial Audio : Nx3DStereo / Multi-Pairing : YesEQ Controls : Bass & TrebleBattery Type : Lithium-Ion PolymerIP Rating : IP54Reverse charging : USB-C®, 12V
RM1,899.00
-
Fender Fender Audio Elie 12 120 Watt 4 Channel Portable Bluetooth Speaker with Built In Battery - Skyscraper Black ( ELIE12 ELIE-12 )
SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA- Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option 'Standard Delivery' and all orders will be shipped out on timely manner.*Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A,Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6Specifications :Sound Pressure Level (SPL) : 101dB @ 1mSpeaker Configuration : 2 x Full-range drivers, 2 x Tweeters, 2 x SubwoofersMax Power Output : 120WBattery Life : 15 hoursQuick Charging : 15 minutes = 2 hours of playtimeWired & Wireless Inputs : 1 x XLR Combo & Bluetooth® / 2 x Ultra Low LatencyOutput : 3.5mm AUXWeight : 8.75 pounds (3970g)Bluetooth® Version : 5.3 (SBC, AAC, LC3)DSP Technology : MaxxAudio, MaxxBassSpatial Audio : Nx3DStereo / Multi-Pairing : YesEQ Controls : Bass & TrebleBattery Type : Lithium-Ion PolymerIP Rating : IP54Reverse charging : USB-C®, 12V
RM1,899.00
-
Fender Fender Audio ELIE 6 60 Watt 4 Channel Portable Bluetooth Speaker with Built In Battery and Subwoofer - White ( ELIE6 ELIE-6 )
SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA- Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option 'Standard Delivery' and all orders will be shipped out on timely manner.*Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A,Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6Specifications :Sound Pressure Level (SPL) : 96dB @ 1mSpeaker Configuration : 1 x Full-range driver, 1 x Tweeter, 1 x SubwooferMax Power Oulput : 60WBattery Life : 18 HoursQuick Charging : 15 minutes = 1.5 hours of playtimeWired & Wireless Inputs : 1 x XLR Combo & Bluetooth® / 2 x Low LatencyOutput : 3.5mm AUXBluetooth® Version : 5.3 (SBC, AAC, LC3, LHDC)Stereo / Multi-Pairing : YesBattery Type : Lithium-lon PolymerIP Rating : IP54Reverse charging : USB-CO, 12VFeatures :Powerful 60W Output : Delivers high-volume sound with exceptional clarity, capable of filling large rooms or outdoor spaces.3-Way Driver System : Equipped with a dedicated subwoofer, a full-range driver, and a tweeter to ensure balanced sound from deep bass to crisp highs.Advanced Waves SoC : Utilizes a smart audio processing chip to maintain rich, undistorted sound even at maximum volume levels.4-Channel Multi-Input Mixing : Capable of handling up to four simultaneous audio sources (Bluetooth, XLR/TRS, and two wireless Fender channels).XLR-1/4” Combo Jack : Allows you to plug in a microphone or instrument (like a guitar) directly for quick performances or practice sessions.Hi-Res Wireless Audio : Supports 48kHz/24-bit audio quality (and up to 96kHz for Lossless mode) via the latest Bluetooth 5.3 technology.Ultra-Low Latency : Features less than 20ms of audio lag, making it perfect for watching videos or gaming without any synchronization issues.Auracast Technology : Allows you to wirelessly sync and broadcast audio to up to 100 ELIE speakers simultaneously.18-Hour Battery Life : Provides long-lasting performance for all-day use on a single full charge.Quick Charge Support : A 15-minute charge gives you up to 1.5 hours of playback time for those on the move.Reverse Charging (Power Bank) : The USB-C port can be used to charge your smartphone or other devices in an emergency.IP54 Rated: Dust and splash-resistant, making it
RM1,399.00
-
Fender Fender Audio ELIE 6 60 Watt 4 Channel Portable Bluetooth Speaker with Built In Battery and Subwoofer - Skyscraper Black ( ELIE6 ELIE-6 )
SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA- Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option 'Standard Delivery' and all orders will be shipped out on timely manner.*Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A,Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6Specifications :Sound Pressure Level (SPL) : 96dB @ 1mSpeaker Configuration : 1 x Full-range driver, 1 x Tweeter, 1 x SubwooferMax Power Oulput : 60WBattery Life : 18 HoursQuick Charging : 15 minutes = 1.5 hours of playtimeWired & Wireless Inputs : 1 x XLR Combo & Bluetooth® / 2 x Low LatencyOutput : 3.5mm AUXBluetooth® Version : 5.3 (SBC, AAC, LC3, LHDC)Stereo / Multi-Pairing : YesBattery Type : Lithium-lon PolymerIP Rating : IP54Reverse charging : USB-CO, 12VFeatures :Powerful 60W Output : Delivers high-volume sound with exceptional clarity, capable of filling large rooms or outdoor spaces.3-Way Driver System : Equipped with a dedicated subwoofer, a full-range driver, and a tweeter to ensure balanced sound from deep bass to crisp highs.Advanced Waves SoC : Utilizes a smart audio processing chip to maintain rich, undistorted sound even at maximum volume levels.4-Channel Multi-Input Mixing : Capable of handling up to four simultaneous audio sources (Bluetooth, XLR/TRS, and two wireless Fender channels).XLR-1/4” Combo Jack : Allows you to plug in a microphone or instrument (like a guitar) directly for quick performances or practice sessions.Hi-Res Wireless Audio : Supports 48kHz/24-bit audio quality (and up to 96kHz for Lossless mode) via the latest Bluetooth 5.3 technology.Ultra-Low Latency : Features less than 20ms of audio lag, making it perfect for watching videos or gaming without any synchronization issues.Auracast Technology : Allows you to wirelessly sync and broadcast audio to up to 100 ELIE speakers simultaneously.18-Hour Battery Life : Provides long-lasting performance for all-day use on a single full charge.Quick Charge Support : A 15-minute charge gives you up to 1.5 hours of playback time for those on the move.Reverse Charging (Power Bank) : The USB-C port can be used to charge your smartphone or other devices in an emergency.IP54 Rated: Dust and splash-resistant, making it
RM1,399.00
-
Xvive Xvive Audio P3 Mono Bluetooth Audio Receiver for Mixers and Active PA/DJ Systems ( P 3 / P-3 )
Features - Two P3 units can be linked in order to receive a stereo signal - Internal rechargeable battery provides 6 hours of operation - USB Type-C port for charging via any 5V USB power source - Stable connectivity over a 100 ft range (line-of-sight without obstacles) gives you ample coverage for parties, events and weddings
RM169.00
-
Wharfedale Pro WHARFEDALE PRO WLA-210X Series 890 Watts RMS Dual 10" 2-Way Passive Line Array Loudspeaker (WLA 210X WLA210X)
FEATURES 2 x 10″ LF drivers 3″ Neodymium HF compression driver 138 dB Max SPL 15mm / 18mm Birch plywood construction Integral, side plate adjustable rigging system 100° x 10° dispersion 180 watts programme HF 1600 watts programme LF 16 Ω impedance SPECIFICATIONS Model Name WLA-210X System Type Passive Configuration Two-way 2 x 10” Frequency Response (+/-3 dB) 65 Hz – 20 KHz Frequency Range (-10 dB) 60 Hz – 20 KHz Sensitivity (2.83 v / 1 m) 102 dB Calculated Maximum SPL @1 m LF:135 dB HF:138 dB System Rated Impedance 16 Ω Low Frequency Transducer Size 2 x 260 mm / 2 x 10” Voice Coil Size 65 mm / 2.5” Rated Impedance 8 Ω x 2 LF Power (re:AES2-2012) 2 x 400 W High Frequency Transducer HF Driver Type Compression Driver – Neo Voice Coil Size 75 mm / 3.0” Exit Size 35.56 mm / 1.4” Diaphragm Material Titanium Rated Impedance 8 Ω HF Power (re:AES2-2012) 80 W Nominal Coverage (H x V) 100° x 10° Power System Continuous Power LF:800 W HF:90 W System Programme Power LF:1800 W HF:180 W System Peak Power LF:3600 W HF:360 W Crossover frequency 1.5 KHz Input Connector 2 x speakON compatible Hardware Integral side plate adjustable rigging 0°-10° Enclosure Enclosure Material 15 mm / 18 mm Plywood Finish Rhino Black Paint Grille Material & Finish 1.2 mm Black Steel Dimensions – (Unpacked) Height Front 314 mm / 12.4” Height Rear 240.2 mm / 9.46” Width 760 mm / 29.9” Depth 504 mm / 19.84” Dimensions – (Packed) Height 404 mm / 15.9” Width Front 855 mm / 33.7” Width Rear 855 mm / 33.7” Depth 594 mm / 23.4” Weight Net Weight (kg / lbs) 34.8 kg / 76.6 lbs Gross Weight (kg / lbs) 38.5 kg / 84.7 lbs
RM6,000.00 RM0.00
-
Wharfedale Pro Wharfedale Pro WLA-28XF - IPX6 Waterproof Line Array Element Speaker (WLA 28XF WLA28XF)
FEATURES Dual 8” line array element Stainless aluminium hardware Wax wrapped components 100 H x 10 V dispersion Dual WY-24K4Z waterproof input connectors Two WY-24K4Z cable connectors included 133 dB Max SPL @ 1 m SPECIFICATIONS Model Name WLA-28XF System Type Passive Configuration two-way Frequency Response (+/- 3dB) 65-20 KHz Frequency Range (- 10 dB) 60-20 KHz (Passive)Sensitivity 2.83v/1m 101 dB (Passive)Calculated Maximum SPL @1m 133 dB System Rated Impedance 16 Ω Low Frequency Transducer Size (mm / inches) 203.2 mm / 8” Voice Coil Size (mm / inches) 51.6 mm / 2.0” LF Magnet Material ferrite LF Frame Material aluminium Rated Impedance 8 Ω x 2 LF Power re:AES2-2012 200 W x 2 High Frequency Transducer HF Driver Type: Compression Driver Coil Size (mm / inches) 75mm / 3” Exit Size (mm / inches) 1.4″ HF Magnet Material NdFeB Diaphragm Material Titanium Rated Impedance 16 Ω HF Power re:AES2-2012 90 W Waveguide Type square Nominal Coverage (H x V) 100 H x 10 V System Continuous Power (w) 400 W System Programme Power (w) 800 W System Peak Power (w) 1600 W Crossover frequency 1.7 KHz Hardware 2 x WY-24K4Z (waterproof) Rigging 4 points for rigging pole mount No handles Yes cabinet type Trapezoid Enclosure Material and finish 15 mm,18 mm plywood/3.0 mm Aluminium Colour Options Waterproof black paint Grille Material & Finish 3.0 mm Black Aluminium Dimensions – Unpacked (mm / inches): Height front 279 mm / 10.98″ Height Rear 191.2 mm / 7.53″ Width 845 mm / 33.3″ Depth 467 mm / 18.39″ Dimensions – Packed (mm / inches): Height 360 mm / 16.7″ Width Front 944 mm / 37.2″ Width Rear 944 mm / 37.2″ Depth 540 mm / 21.3″ Weight Net Weight (kg / lbs) 40 kg / 88.0 lbs Gross Weight (kg / lbs) 43.5 kg / 97.5 lbs
RM8,340.00 RM0.00
-
Wharfedale Pro Wharfedale Pro WLA-112 12" Passive Hybrid Curvature Element Speaker (WLA112 WLA 112)
FEATURES 12″ Coaxial Beyma driver 450 W Continuous 900 W Programme 1800 W Peak 4.0″ LF voice coil 2.87″ HF voice coil 139 dB System Peak SPL SPECIFICATIONS Model Name WLA-112 Design Hybrid Curvature Array System Type 12″ coaxial passive Configuration two-way Frequency Response (+/-3 dB) 55 Hz – 20 KHz Frequency Range (- 10 dB) 35 Hz – 25 KHz Sensitivity 2.83 V/1 m 101 dB Calculated Maximum SPL @ 1 m 133 dB System Peak SPL 139 dB** System Rated Impedance 8 Ω * ** level at 1 m under free field conditions using pink noise with crest factor 4, with dedicated preset. Low Frequency Transducer Size 312 mm / 12” Voice Coil Size 101.6 mm / 4.0” LF Frame Material Aluminium High Frequency Transducer HF Driver Type Compression Driver Coil Size (mm / inches) 72.2 mm / 2.87″ Exit Size (mm / inches) 38.1mm / 1.5″ Diaphragm Material Composite titanium / polyester Waveguide Type EVO-Fold® Nominal Coverage (HxV) 100° x 20° Special Features Copper Demodulating rings in both LF and HF units Waterproof LF cone Shared High performing Ferrite magnet system design Power(AES2) System Continuous Power (W) 450 System Programme Power (W) 900 System Peak Power (W) 1800 Crossover Frequency 1.2 KHz Recommended HPF = BW 18 dB/oct. 30 Hz Input Connector 2 x speakON compatible Rigging & Hardware: 3 points for rigging Vertical Splay angle range: 0°- 5° – 10° – 15° Horizontal Splay angle 15° Optional Accessories WLA-1 Common Fly Frame Hardware WLA-1 Link Stand pole: Dual Angle -2.5° / +7.5° Handles: 2 side / 2 back Enclosure Cabinet Type Trapezoid Enclosure Material and finish 15 mm plywood / Rhino Rock Colour Black paint Grille Material & Finish Powder coated perforated steel Dimensions – Unpacked: Height Front 332 mm / 13.1″ Height Rear 246.4 mm / 9.7″ Width 566 mm / 22.3″ Depth 465 mm / 18.3″ Dimensions – Packed: Height 661 mm / 26.0″ Width Front 550 mm / 21.7″ Width Rear 550 mm / 21.7″ Depth 410 mm / 16.7″ Weight Net Weight 29.4 Kg Gross Weight 31.8 Kg
RM6,680.00 RM0.00
-
Wharfedale Pro WHARFEDALE PRO WLA 28X Series 400 Watts RMS Dual 8" 2-Way Passive Line Array Loudspeaker (WLA28X WLA-28X)
FEATURES Re-designed dual 8” Passive line array Re-defined HF compression driver Improved HF protection circuit Bi-amp and Passive mode switching SPECIFICATIONS Model Name WLA-28X System Type 2 x 8” Two-way Frequency Response (+/-3 dB) 65 Hz-20 KHz Sensitivity (2.83 v / 1 m) 101 dB Calculated Maximum SPL @1 m 133 dB Nominal Coverage (H x V) 100°x10° Power: Continuous / Programme / Peak Passive: 400 W / 800 W / 1600 W Bi-amp LF: 400 W / 800 W / 1600 W Bi-amp HF: 90 W / 180 W / 360 W Rated Impedance ( Ω ) Passive: 16 Ω Bi-amp LF: 16 Ω ; Bi-amp HF: 16 Ω HF Diaphragm Material Titanium HF Magnet Material NdFeB LF Magnet Material Ferrite LF Frame Material Aluminium HF Coil Size (inches/mm) 3.0” (75 mm) LF Coil Size (inches/mm) 2.0” (51.6 mm) Crossover Frequency 1.7 KHz Cabinet Type Trapezoid Enclosure Material and finish 18 mm / 15 mm Plywood Enclosure Colour Black paint Grille Material & Finish 1.5 mm Steel Connectors Neutrik NL4MP Hardware Integral side plate adjustable rigging 0°-10° Cabinet Dimensions HxWxD(mm) 250 x 760 x 463.2 mm Packed Dimensions HxWxD(mm) 320 x 830 x 534 mm Net Weight (Kg) 29.5 Kg Gross Weight (Kg) 32.0 Kg
RM5,010.00 RM0.00
-
Wharfedale Pro Wharfedale Pro WLA-28SUBXF - IPX6 Waterproof Line Array Subwoofer Speaker. (WLA28SUBXF WLA 28SUBXF)
IPX6 LINE ARRAY SYSTEM IPX6 Waterproof Line array Wax wrapped components Anti-corrosion stainless steel hardware Waterproof input connectors Plywood construction in aluminium cabinets 2 x 8″ element – WLA-28XF 2 x 15″ flying subwoofer element – WLA-28SUBXF 2 x 18″ subwoofer – WLA-218BXF FEATURES Dual 15” subwoofer Stainless aluminium hardware Wax wrapped components Flattened front grille Single WY-24K4Z waterproof input connector WY-24K4Z Cable connector included 145 dB Max SPL @ 1 m SPECIFICATIONS Model Name WLA-28SUBXF System Type Passive Configuration 2 x 15″ Subwoofer Frequency Response (+/- 3dB) 39-900 Hz Frequency Range (- 10 dB) 35-1.5 KHz (Passive)Sensitivity 2.83v/1m 108 dB (Passive)Calculated Maximum SPL @1m 145 dB System Rated Impedance 4 Ω Low Frequency Transducer Size (mm / inches) 381 mm / 15” Voice Coil Size (mm / inches) 100 mm / 4.0” LF Magnet Material ferrite LF Frame Material aluminium Rated Impedance 8 Ω x 2 LF Power re:AES2-2012 600 W x 2 High Frequency Transducer HF Driver Type: – Coil Size (mm / inches) – Exit Size (mm / inches) – HF Magnet Material – Diaphragm Material – Rated Impedance – HF Power re:AES2-2012 – Waveguide Type – Nominal Coverage (H x V) – System Continuous Power (w) 1200 W System Programme Power (w) 2400 W System Peak Power (w) 4800 W Crossover frequency Hardware 1 x WY-24K4Z (waterproof) Rigging 4 points for rigging pole mount No handles Yes cabinet type square Enclosure Material and finish 18 mm plywood/3.0 mm Aluminium Colour Options Waterproof black paint Grille Material & Finish 3.0 mm Black Aluminium Dimensions – Unpacked (mm / inches): Height front 494 mm / 19.4″ Height Rear 494 mm / 19.4″ Width 845 mm / 33.3″ Depth 653 mm / 25.7″ Dimensions – Packed (mm / inches): Height 584mm / 23″ Width Front 933mm / 36.7″ Width Rear 933mm / 36.7″ Depth 723mm / 28.5″ Weight Net Weight (kg / lbs) 81.0kg / 178.2lbs Gross Weight (kg / lbs) 86.4kg / 190.1lbs
RM12,130.00 RM0.00
-
Wharfedale Pro Wharfedale Pro WLA 28SUBA - 2 x 15" active subwoofer. (WLA28SUBA WLA-28SUBA)
FEATURES Dual 15″ LF drivers with 4.0″ voice coils 145 dB Max SPL @ 1 meter 15 mm / 18 mm Birch plywood construction Integral rigging system 2000 watts Continuous 4000 watts Peak 8 x DSP presets SPECIFICATIONS Model Name WLA-28SUBA System Type Active 2×15 Subwoofer Frequency Response (+/-3 dB) 39 Hz-125 Hz Frequency Range (-10 dB) 35 Hz-163 KHz Loudspeaker Sensitivity @ 1 W / 1 m) 108 dB Maximum SPL(peak)(@1 m) 145 dB Nominal Coverage (H x V) – Signal Processing DSP based,8 presets resident in Input Module Preset list A) FLOWN B) FLOWN with 218 C) STACK D) STACK with 218 E) CARDIOID AUDIENCE F) CARDIOID STAGE G) CUSTOM H) CUSTOM Amplifiers Amplifier Design Class D Power Rating: 4000 W Peak / 2000 W Continuous Power On Protection Power switch on/off mute Thermal Protection Amplifier Shut Down. Auto Reset Low Line Voltage Shut Down 80% Nominal Line Voltage Driver Protection RMS, Peak Limiters and DC DC and Short Protection Yes Limiter Indicator Red LED Signal Indicator Green LED Power/Active Indicator White LED Find Function Indicator Blue LED Input Sensitivity +4 dBu Maximum Input Level +18 dBu Input Impedance Balanced: 10 KΩ AC Power details – Power Supply High Efficiency Switching Mode Power Supply Connectors Input Connector XLR 1/ 4〞Combo jack Link Connector Balanced XLR pin Connector UPDATE USB Type B NETWORK (RS485) RJ45 AC Power Options AC 100–240 V~,50/60 HZ AC Input Connector powerCON AC Loop Through Connector powerCON Hardware – Rigging Integral side plate Enclosure Material and finish 15 mm / 18 mm Plywood Colour Options black paint Grille Material & Finish 1.5 Steel Unpacked dimensions – Height 485 mm / 19.1″ Width (Front) 760 mm / 29.9″ Width (Back) 760 mm / 29.9″ Depth 775 mm / 30.67″ Packed Dimensions – Height 575 mm / 22.6″ Width (Front) 850 mm / 33.5″ Width (Back) 850 mm / 33.5″ Depth 865 mm / 34.6″ Net Weight (Kg / lbs) 67.0 Kg / 147.4 lbs Gross Weight (Kg / lbs) 74.3 Kg / 163.5 lbs
RM13,190.00 RM0.00
-
Wharfedale Pro Wharfedale- WLA 28SUB 4800W PEAK 2 X 15" SUBWOOFER SPEAKER (WLA28SUB WLA-28SUB)
FEATURES Dual 15″ LF drivers with 4.0″ voice coils 145 dB Max SPL 15 mm / 18 mm Birch plywood construction Integral rigging system 1200 watts AES (RMS) 2400 watts Programme 4800 watts Peak 4 Ω impedance SPECIFICATIONS Model Name WLA-28SUB System Type Passive Configuration 2 x 15″ subwoofer Frequency Response (+/-3 dB) 39 Hz-900 Hz Frequency Range (-10 dB) 39 Hz-1.5 KHz Sensitivity (2.83 v / 1 meter) 108 dB Calculated Maximum SPL @ 1 meter 145 dB System Rated Impedance 4 Ω Low Frequency Transducer Size 2 x 381 mm / 15” Voice Coil Size 100 mm / 4” Rated Impedance 2 x 8 Ω LF Power (re:AES2-2012) 2 x 600 W High Frequency Transducer HF Driver Type Voice Coil Size Exit Size Diaphragm Material Rated Impedance HF Power (re:AES2-2012) Nominal Coverage (H x V) Power System Continuous Power 1200 W System Programme Power 2400 W System Peak Power 4800 W Crossover frequency No Input Connector 2 x speakON compatible Hardware Integral side plate non adjustable Enclosure Enclosure Material 15 mm,18 mm Plywood Finish Black Paint Grille Material & Finish 1.2 mm Black Steel Dimensions – (Unpacked) Height Front 485 mm / 19.1″ Height Rear 485 mm / 19.1″ Width 760 mm / 29.9” Depth 716 mm / 28.2” Dimensions – (Packed) Height 850 mm / 33.5″ Width Front 575 mm / 22.6″ Width Rear 575 mm / 22.6″ Depth 806 mm / 31.7″ Weight Net Weight (kg / lbs) 61.2 kg / 134.6 lbs Gross Weight (kg / lbs) 66.0 kg / 145.2 lbs
RM6,520.00 RM0.00
-
Wharfedale Pro Wharfedale- WLA 28A- 2 x 8 inch Active Line Array Speaker (WLA28A WLA-28A)
8 SPKR 100 Hz HPF"]]],["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"E) 2 to 4 SPKR"]]],["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"F) 4 to 8 SPKR"]]],["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"G) >8 SPKR"]]],["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"H) CUSTOM"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Amplifiers"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"data-type":"leaf"},""]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Amplifier Design"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Class D"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Power Rating:"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"1500 W Peak (1300 W LF +"]]],["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"200 W HF), 750 W Continuous"]]],["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"(650 W LF + 100 W HF)"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Power On Protection"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Power switch on/off mute"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Thermal Protection"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Amplifier Shut Down. Auto Reset"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Low Line Voltage Shut Down"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"80% Nominal Line Voltage"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Driver Protection"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Independent L/ H Limiters and DC"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"DC and Short Protection"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Yes"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Limiter Indicator"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Red LED"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Signal Indicator"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Green LED"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Power/Active Indicator"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"White LED"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Find Function Indicator"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Blue LED"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Input Sensitivity"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"+4 dBu"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Maximum Input Level"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"+18 dBu"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"data-type":"leaf"},""]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"data-type":"leaf"},""]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Input Impedance"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Balanced: 10 KΩ"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"AC Power details – Power Supply"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"High Efficiency Switching Mode Power Supply"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Connectors"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"data-type":"leaf"},""]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Input Connector"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"XLR 1/ 4〞Combo jack"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Link Connector"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Balanced XLR pin Connector"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"UPDATE"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"USB Type B"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"NETWORK (RS485)"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"RJ45"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"AC Power Options"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"AC 100-120 V~/ 220-240 V~,50/60 HZ"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"AC Input Connector"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"powerCON"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"AC Loop Through Connector"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"powerCON"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Hardware – Rigging"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Integral side plate adjustable "]]],["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"rigging 0°-10°"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Enclosure Material and finish"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"15 mm / 18 mm Plywood"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Colour Options"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"black paint"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Grille Material & Finish"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"1.5 Steel"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Unpacked dimensions – Height"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"250 mm / 9.84″ 181 mm / 7.1″"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Width (Front)"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"760 mm / 29.92″"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Width (Back)"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"760 mm / 29.92″"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Depth"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"463.2 mm / 18.23″"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Packed Dimensions – Height"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"320 mm / 12.6″"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Width (Front)"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"830 mm / 32.7″"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Width (Back)"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"830 mm / 32.7″"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Depth"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"534 mm / 21.0″"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Net Weight (Kg / lbs)"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--odd-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"30.2 Kg / 66.4 lbs"]]]]],["tr",{},["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"Gross Weight (Kg / lbs)"]]]],["tc",{"rowSpan":1,"colSpan":1,"hidden":false},["p",{},["span",{"data-type":"text"},["span",{"color":"rgb(0, 0, 0)","highlight":"var(--even-bg-color)","sz":12,"szUnit":"pt","data-type":"leaf"},"32.5 Kg / 71.5 lbs"]]]]]],["p",{"jc":"left","ind":{},"spacing":{}},["span",{"data-type":"text"},["span",{"data-type":"leaf"},""]]]]">FEATURES Dual 8″ active 132 dB Max SPL @ 1 meter 15 mm / 18 mm Birch plywood construction 100° x 10° dispersion 650 W LF + 100 W HF Continuous 1300 W LF + 200 W HF Peak 8 x DSP presets including FIR SPECIFICATIONS Model Name WLA-28A System Type Active 8” 2-way Bi-Amplified Frequency Response (+/-3 dB) 60 Hz – 20 KHz Frequency Range (-10 dB) 55 Hz – 20 KHz Loudspeaker Sensitivity @ 1 W / 1 m) 100 dB Maximum SPL(peak)(@1 m) 132 dB Nominal Coverage (H x V) 100° x 10° Signal Processing DSP based, 8 FIR presets resident in Input Module Preset list A) 1 SPKR 100 Hz HPF B) 2 to 4 SPKR 100 Hz HPF C) 4 to 8 SPKR 100 Hz HPF D) >8 SPKR 100 Hz HPF E) 2 to 4 SPKR F) 4 to 8 SPKR G) >8 SPKR H) CUSTOM Amplifiers Amplifier Design Class D Power Rating: 1500 W Peak (1300 W LF + 200 W HF), 750 W Continuous (650 W LF + 100 W HF) Power On Protection Power switch on/off mute Thermal Protection Amplifier Shut Down. Auto Reset Low Line Voltage Shut Down 80% Nominal Line Voltage Driver Protection Independent L/ H Limiters and DC DC and Short Protection Yes Limiter Indicator Red LED Signal Indicator Green LED Power/Active Indicator White LED Find Function Indicator Blue LED Input Sensitivity +4 dBu Maximum Input Level +18 dBu Input Impedance Balanced: 10 KΩ AC Power details – Power Supply High Efficiency Switching Mode Power Supply Connectors Input Connector XLR 1/ 4〞Combo jack Link Connector Balanced XLR pin Connector UPDATE USB Type B NETWORK (RS485) RJ45 AC Power Options AC 100-120 V~/ 220-240 V~,50/60 HZ AC Input Connector powerCON AC Loop Through Connector powerCON Hardware – Rigging Integral side plate adjustable rigging 0°-10° Enclosure Material and finish 15 mm / 18 mm Plywood Colour Options black paint Grille Material & Finish 1.5 Steel Unpacked dimensions – Height 250 mm / 9.84″ 181 mm / 7.1″ Width (Front) 760 mm / 29.92″ Width (Back) 760 mm / 29.92″ Depth 463.2 mm / 18.23″ Packed Dimensions – Height 320 mm / 12.6″ Width (Front) 830 mm / 32.7″ Width (Back) 830 mm / 32.7″ Depth 534 mm / 21.0″ Net Weight (Kg / lbs) 30.2 Kg / 66.4 lbs Gross Weight (Kg / lbs) 32.5 Kg / 71.5 lbs
RM7,580.00 RM0.00
-
Wharfedale Pro WHARFEDALE PRO WLA-28 Dolly Speaker Frame Designed for WLA-28A SYSTEM (WLA28 DOLLY FRAME WLA28-DOLLY-FRAME)
With the WLA-28 Dolly Frame, manoeuvrability is now an added feature The steel frame acts both as a common fly frame for flying situations AND as a dolly for ground stacking.
RM2,810.00 RM0.00
-
Wharfedale Pro Wharfedale Pro WLA 25SUB Passive, 2800W Peak 2 X 10" Subwoofer (WLA25SUB WLA-25SUB)
This subwoofer physically and acoustically matches the WLA-25 system. Using a reversed-phase horn loaded design, the 2 * 10” LF drivers with massive 2.5” coils deliver the consistent low end punch to complete this versatile and portable array. FEATURES Dual 10″ LF driver with 2.5″ voice coils 141 dB Max SPL 15 mm / 18 mm Birch plywood construction Integral rigging system 700 watts AES (RMS) 1400 watts Programme 2800 watts Peak 4 Ω impedance SPECIFICATIONS Model Name WLA-25SUB System Type Passive Configuration 2 x 10” subwoofer Frequency Response (+/-3 dB) 56 Hz-1.5 KHz Frequency Range (-10 dB) 56 Hz-2.0 KHz Sensitivity (2.83 v / 1 m) 107 dB Calculated Maximum SPL @1 m 141 dB System Rated Impedance 4 Ω Low Frequency Transducer Size 2 x 254 mm / 10” Voice Coil Size 65.5 mm / 2.5” Rated Impedance 8 Ω LF Power (re:AES2-2012) 2 x 350 W High Frequency Transducer HF Driver Type Voice Coil Size Exit Size Diaphragm Material Rated Impedance HF Power (re:AES2-2012) Nominal Coverage (H x V) Power System Continuous Power 700 W System Programme Power 1400 W System Peak Power 2800 W Crossover frequency Input Connector 2 x speakON compatible Hardware Integral, non adjustable Enclosure Enclosure Material 15 mm,18 mm Plywood Finish Black or white paint Grille Material & Finish Steel Dimensions – (Unpacked) Height Front 400 mm / 15.74” Height Rear 400 mm / 15.74” Width 536 mm / 21.10” Depth 550 mm / 21.65″ Dimensions – (Packed) Height 610 mm / 24.01″ Width Front 470 mm / 18.50″ Width Rear 470 mm / 18.50″ Depth 596 mm / 23.46″ Weight Net Weight (kg / lbs) 37.0 kg / 81.57 lbs Gross Weight (kg / lbs) 39.5 kg / 87.08 lbs
RM4,020.00 RM3,618.00
-
Wharfedale Pro WHARFEDALE PRO Common Fly Speaker Frame Designed for WLA-28 SYSTEM (WLA28 FLY FRAME WLA28-FLY-FRAME)
Arrays can be assembled using only WLA-28 line array elements or with WLA-15B / WLA-28SUB Subwoofers at the top of the array. The WLA-28 Common Fly frame supports up to 12 x WLA-28 elements and a WLA-28SUB.
RM1,820.00 RM0.00
You have seen 384 out of 1545 products