Next Audio LA210X Active 3-way Compact Line Array ( LA 210X / LA-210X )

Description

The LA210x is a medium format three-way, coaxial, active line array element designed to support a wide range of mid to large-sized touring applications and installations where easy to use, from transportation to installation and rigging, are critical. Built-in powerful DSP and amplification eliminates amplifier racks, long loudspeaker cables, and basic system calibration.

 

 

Custom made European transducers and a maximally optimized acoustic design provide excellent sound fidelity at very high SPL levels. The LA210x features dual 10-inch (3-inch voice coil) neodymium woofers and a groundbreaking coaxial ring radiator loaded by an exclusively developed OSWG waveguide. This acoustic design delivers exceptional phase coherence and consistent coverage down to 300Hz and the most accurate transient reproduction.

 

 

SPECIFICATIONS
Product Type
3-Way Active Line Array Element
Frequency Response (-6dB)
58Hz - 19.000Hz
Low Frequency Extension (-10dB)
54Hz
Nominal Coverage (-6dB)
100º (300Hz - 16kHz) x 10º
RMS Power
2000W (LF:1320W | MF:420W | HF:260W)
Amplifier Technology
3-Channel UMAC Class D - Full Bandwidth PWM Modulator With Ultra-Low Distortion
DSP Technology
96kHz / 40 bit SHARC DSP
Latency
1.5ms
DSP Adjustable Parameters
Filters: PEQ, FIR, hi/lo-shelving, all-pass, band-pass, hi/lo-pass | Limiters: RMS Voltage, Peak Voltage | Groups: Mute, Delay, Level, Polarity, EQ
DSP Presets
24
Delay Adjustment
500ms (172m) on Input + 400ms (138m) on Groups
Control Type
Control via LCD and Encoder on the Back Panel | Control via Software using Ethernet - Max. Cable Length 70m
Maximum SPL (calculated)
RMS: 136dB | Peak: 142dB (Full-Space)
Low Frequency Driver
2 x 10" / 3" VC, Neodymium, B&C Custom Speaker
High Frequency Driver
1 x 1.4" Neodymium Coaxial Ring Radiator Driver (MF: 3" VC | HF: 2" VC)
Audio Signal Inputs
Analog | AES (AESOP)
Input Connectors
1 x XLR | 1 x Neutrik EtherCON®
Audio Signal Outputs
Analog | AES (AESOP)
Output Connectors
1 x XLR | 1 x Neutrik EtherCON®
Protections
Clip Limiter | Temperature | Over Current | DC Protection | HF Protection
Operating Temperature Range
0ºC - 40ºC
Cooling Type
External Aluminum Heat Sink with Internal Speed Controlled Fan
Power Supply
UREC Universal Mains Switch Mode Power Supply (SMPS) with Power Factor Correction (PFC) and Standby Converter
Power Input
AC 100V - 240V 50Hz/60Hz
Mains Connector
Dual (IN/OUT) Neutrik powerCON TRUE1 TOP®
Power Consumption
275W
Recommended Subwoofer
LAs518A
Special Features
Speaker Cabinet Auto-Identification via Software
Fittings
3-Point Adjustable Rigging System (0º to 10º with 1º Step)
Handles
1 on Each Side, 2 on the Back
Grille
Black Perforated Steel
Construction
15mm Multi-Laminate Birch Plywood
Finish
Semi-Matte Black Textured Coating
Dimensions (WxHxD)
720 x 350 x 550 mm (28.3 x 13.8 x 21.7 in)
Net Weight
37kg (81.6lb)
Shipping Weight
40kg (88.2lb)
Accessories
Transportation Dolly, Ground Stack Accessory, Flying Frame, Pull-Back Accessory

Next Audio LA210X Active 3-way Compact Line Array ( LA 210X / LA-210X )

Product form

RM31,260.00

Found Better Price? Reach us Now.
Click here if you find a better price.

SKU: LA210X

    Description

    The LA210x is a medium format three-way, coaxial, active line array element designed to support a wide range of mid to large-sized touring applications and installations where easy to use, from transportation to installation and rigging, are critical. Built-in powerful DSP and amplification eliminates amplifier racks, long loudspeaker cables, and basic system calibration.

     

     

    Custom made European transducers and a maximally optimized acoustic design provide excellent sound fidelity at very high SPL levels. The LA210x features dual 10-inch (3-inch voice coil) neodymium woofers and a groundbreaking coaxial ring radiator loaded by an exclusively developed OSWG waveguide. This acoustic design delivers exceptional phase coherence and consistent coverage down to 300Hz and the most accurate transient reproduction.

     

     

    SPECIFICATIONS
    Product Type
    3-Way Active Line Array Element
    Frequency Response (-6dB)
    58Hz - 19.000Hz
    Low Frequency Extension (-10dB)
    54Hz
    Nominal Coverage (-6dB)
    100º (300Hz - 16kHz) x 10º
    RMS Power
    2000W (LF:1320W | MF:420W | HF:260W)
    Amplifier Technology
    3-Channel UMAC Class D - Full Bandwidth PWM Modulator With Ultra-Low Distortion
    DSP Technology
    96kHz / 40 bit SHARC DSP
    Latency
    1.5ms
    DSP Adjustable Parameters
    Filters: PEQ, FIR, hi/lo-shelving, all-pass, band-pass, hi/lo-pass | Limiters: RMS Voltage, Peak Voltage | Groups: Mute, Delay, Level, Polarity, EQ
    DSP Presets
    24
    Delay Adjustment
    500ms (172m) on Input + 400ms (138m) on Groups
    Control Type
    Control via LCD and Encoder on the Back Panel | Control via Software using Ethernet - Max. Cable Length 70m
    Maximum SPL (calculated)
    RMS: 136dB | Peak: 142dB (Full-Space)
    Low Frequency Driver
    2 x 10" / 3" VC, Neodymium, B&C Custom Speaker
    High Frequency Driver
    1 x 1.4" Neodymium Coaxial Ring Radiator Driver (MF: 3" VC | HF: 2" VC)
    Audio Signal Inputs
    Analog | AES (AESOP)
    Input Connectors
    1 x XLR | 1 x Neutrik EtherCON®
    Audio Signal Outputs
    Analog | AES (AESOP)
    Output Connectors
    1 x XLR | 1 x Neutrik EtherCON®
    Protections
    Clip Limiter | Temperature | Over Current | DC Protection | HF Protection
    Operating Temperature Range
    0ºC - 40ºC
    Cooling Type
    External Aluminum Heat Sink with Internal Speed Controlled Fan
    Power Supply
    UREC Universal Mains Switch Mode Power Supply (SMPS) with Power Factor Correction (PFC) and Standby Converter
    Power Input
    AC 100V - 240V 50Hz/60Hz
    Mains Connector
    Dual (IN/OUT) Neutrik powerCON TRUE1 TOP®
    Power Consumption
    275W
    Recommended Subwoofer
    LAs518A
    Special Features
    Speaker Cabinet Auto-Identification via Software
    Fittings
    3-Point Adjustable Rigging System (0º to 10º with 1º Step)
    Handles
    1 on Each Side, 2 on the Back
    Grille
    Black Perforated Steel
    Construction
    15mm Multi-Laminate Birch Plywood
    Finish
    Semi-Matte Black Textured Coating
    Dimensions (WxHxD)
    720 x 350 x 550 mm (28.3 x 13.8 x 21.7 in)
    Net Weight
    37kg (81.6lb)
    Shipping Weight
    40kg (88.2lb)
    Accessories
    Transportation Dolly, Ground Stack Accessory, Flying Frame, Pull-Back Accessory

    • <h2>Retail-Ready Packaging</h2>

      Retail-Ready Packaging

      Eye-catching designs and clear info your customers will love,
      straight from shelf to checkout.

    • <h2><strong>Trusted by Many</strong></h2>

      Trusted by Many

      Chosen by many Pro and New musician in our local music scene.

    • <h2>Fast & Reliable Fulfilment</h2>

      Fast & Reliable Fulfilment

      Products shipped quickly from our local warehouse, so the gear is always ready and customers satisfied.

    FAQ's

    Do your products come with a warranty?

    Most products come with a 1-year local distributor warranty. Warranty coverage may vary by brand and product. Please refer to the product page or contact us for specific warranty details before purchasing.

    Do you provide installation services?

    Installation services are available for selected digital pianos, drums, and audio equipment, but customers should contact the support team via WhatsApp or phone at 016-5201066 before ordering to confirm service availability for their specific product and location.

    Can I try the instruments before buying?

    Yes! You are welcome to visit our showroom to test selected instruments and equipment before making your purchase.
    - Operating Hours: 10:00 AM – 7:00 PM (Everyday)
    - Contact / WhatsApp: 016-5201066

    How long does delivery take?

    Estimated delivery times are:

    • West Malaysia: 2–7 working days
    • East Malaysia: 5–14 working days (bulky items may require sea freight and take longer)

    Delivery times may vary during peak periods or due to courier delays.

    What if the item I receive is damaged or incorrect?

    Please contact us at 016-5201066 within 24 hours of receiving your order with your order number and clear photos of the item and packaging so we can assist you as quickly as possible.

    Can I return or exchange my purchase?

    Returns and exchanges are subject to our Return & Refund Policy. Items must generally be unused, in their original packaging, and accompanied by proof of purchase. Please reach out to us at 016-5201066 to initiate a return or check your eligibility.

    Recently viewed products

      © 2026 Live Music Malaysia, Powered by Shopify