iRig Pre 2 is a pocket-sized mic preamp that lets you easily use your XLR mics to record, perform and stream with your iPhone*, iPad, Android device or DSLR camera. The sequel to the best-selling mobile mic pre of all time, iRig Pre 2 delivers the same professional sound you’re accustomed to, while adding direct monitoring, auto-switching wiring for use with digital cameras, and so much more.

Like many of today’s musicians, YouTubers and broadcasters, you probably rely on the professional sound quality you get from using an XLR microphone. But for mobile, on-the-go audio and video creation, XLR mics present some challenges. Many require phantom power, and at best, using them also means dragging along a laptop and boxy audio interface to get the mic preamps along with the phantom power you need.

FEATURES

• For iPhone, iPad, Android and digital cameras
• Built-in XLR connector for microphones
• Adjustable gain control
• +48 V phantom power
• 50 Hz to 20 kHz frequency response
• Headphone output with direct monitoring
• Attached 40cm (15.75") TRRS cable
• Auto-sensing 3.5mm output
• Powered by 2xAA batteries
• On/Off switch
• Compatible with all your favourite apps.

SPECIFICATIONS

• Frequency response    from 50 Hz to 20 KHz
• EIN (@gain min)    -113.5 dBA
• EIN (@ gain max)    -92.4dBA
• THD+N    -90 dBA / 0,003% 
• Gain range    48dB
• Phantom max current    6mA
• Battery duration (Alkaline 2xAA)    approx 20 hours when phantom is off, approx 7 hours when phantom is on, Includes: iRig Pre 2, 2xAA batteries, Velcro strip, Free apps for iOS and Android
• Dimensions    40 mm x 110 mm x 34 mm / 1.57 " x 4.33" x 1.34"
• Weight    75 g / 2.65 oz (batteries excluded)
• Cables Length    40 cm / 15.75"