SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA
- Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom
- Third party pickup charges to be beared by buyer
- Kindly put a remark for self collection / Lalamove in your order
- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)
EAST MALAYSIA ORDERS
- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks time
FOR STANDARD DELIVERY
Please select shipping option 'Standard Delivery' and all orders will be shipped out on timely manner.
*Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working days
Waze: Live Music Centre
No 20 & 20-1 & 22 & 22A,
Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, Selangor
Contact : 0-1-6-5-2-0-1-0-6-6
The VX10 condenser vocal microphone was designed to set new performance standards for live sound and broadcast applications. With a uniformly controlled frequency response from 40 Hz – 20 kHz, the VX10 is highly sensitive to transient response and will reproduce vocals and speech with exceptional detail and realism.
The VX10 has a cardioid polar pattern which helps isolate vocals. This mic includes a 21 mm gold vapor capsule and a multi-stage internal pop filter. It is also available in a low output model (VX10LO) for greater control with loud stage volumes or extremely powerful vocalists.
Aside from vocals, the VX10 cardioid condenser microphone will capture acoustic instruments such as guitars, woodwinds, brasses, percussion toys, drum overheads, hi-hats, and pianos.
Designed, assembled, and tested by Audix in the USA.
Specification
| Transducer Type |
Condenser |
| Frequency Response |
40 Hz – 20 kHz |
| Polar Pattern |
Cardioid |
| Output Impedance |
250 ohms |
| Sensitivity |
VX10 – 24 mV / Pa @ 1k VX10LO – 4 mV / Pa @ 1k |
| Equivalent Noise Level |
19 dB (A-weighted) |
| Signal to Noise Ratio |
75 dB |
| Off Axis Rejection |
>20 dB |
| Maximum SPL |
≥138 dB (w/ -10 pad) |
| Power Requirements |
48-52 V |
| Connector |
3-pin XLRm |
| Polarity |
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
| Materials / Finish |
Zinc Alloy & Machined Brass / Black Finish |
| Weight |
310 g / 10.9 oz |
| Length |
180 mm / 7.1 in |