\n"]]],["p",{"list":{"listId":"6utrsnzazrg","isOrdered":false,"level":0,"listStyle":{"format":"bullet","text":"?","align":"left"}}},["span",{"data-type":"text"},["span",{"data-type":"leaf"},"Length:6.7\"\n"]]],["p",{"list":{"listId":"6utrsnzazrg","isOrdered":false,"level":0,"listStyle":{"format":"bullet","text":"?","align":"left"}}},["span",{"data-type":"text"},["span",{"data-type":"leaf"},"Connector:1/8\" TRS plug\n"]]],["p",{"list":{"listId":"6utrsnzazrg","isOrdered":false,"level":0,"listStyle":{"format":"bullet","text":"?","align":"left"}}},["span",{"data-type":"text"},["span",{"data-type":"leaf"},"Power:2 x AA batteries / LB-1 Recharrgeable / USB power\n"]]],["p",{"list":{"listId":"6utrsnzazrg","isOrdered":false,"level":0,"listStyle":{"format":"bullet","text":"?","align":"left"}}},["span",{"data-type":"text"},["span",{"data-type":"leaf"},"Manufacturer Part Number:VMPR+"]]]]">Do you want to elevate the audio quality of your video productions? It all starts with your mic selection. The Rode VideoMic Pro R+ takes Rode successful VideoMic Pro R shotgun microphone and adds several new high-value features. You still get the Rycote Lyre shockmount which does a superior job of isolating the mic capsule and electronics from vibrations that can cause rumble.          But there so much more. Instead of the Pro R 9V battery power the Pro R+ ships with a rechargeable Li-ion battery. And even though the lithium battery will power the mic for over 100 hours if the power does get low,you can run the mic with two AA batteries!          Even better the Pro R+ incorporates digital switching to reduce post-production editing ? with a two-stage highpass filter three-stage gain control HF Boost and a Safety Channel to prevent clipping in the event of unexpected amplitude spikes.           IN THE BOX:   - Rode VideoMic Pro+ - LB-1 Lithium-Ion Rechargeable Battery - Micro USB cable - Detachable 3.5mm TRS Cable       FEATURES   Broadcast-quality condenser microphone captures crystal clear recordings Integrated Rycote Lyre shockmount system isolates the capsule from vibrations for cleaner audio Compact ultra-lightweight form factor (6" length and 3oz. weight) for easy transport and use Power options: included Li-ion battery2-AAor continuous Micro USB power with included cable Includes sealed foam windscreen for indoor uses Digital switching for greater control: HF Boost2-stage highpass3-stage gainand Safety Channel HF Boost dials in clearer high-end details for greater clarity 2-stage highpass filter keeps low-end rumble at bay and reduces post-production editing 3-position gain control (-10dB0+20dB) lets you set exactly the right input level Safety Channel engagement drops the right channel by 10dB; in case of L-channel clippingyoul still have usable audio Standard 3.5mm stereo TRS jack output (dual mono) Camera-shoe mount with 3/8" thread is built-in       SPECIFICATIONS   Microphone Type:Shotgun Mono/Stereo:Mono Polar Pattern:Supercardioid Frequency Range:20Hz-20kHz Max SPL:142.9dB SPL Output Impedance:200 ohms Signal to Noise Ratio:79.8dB Self Noise:14dB (A weighted) Low Cut Filter:75Hz150Hz Pads:-10dB/td> Length:6.7" Connector:1/8" TRS plug Power:2 x AA batteries / LB-1 Recharrgeable / USB power Manufacturer Part Number:VMPR+

Read more less

The VideoMic NTG is a broadcast-grade, feature-packed shotgun microphone optimised for on-camera use. It features the same revolutionary acoustic design as the NTG5 broadcast shotgun microphone, which delivers unmatched transparency and a natural, uncoloured sound. Add to this an incredibly flat frequency response, highly directional supercardioid polar pattern, and very low self-noise, and what you have is a compact on-camera microphone that contends with the world’s best shotgun mics.      As well as sounding outstanding, the VideoMic NTG is extremely flexible, with an array of tools and features to help you take on any recording situation. Digital switching gives you access to a high-pass filter, -20dB pad, high frequency boost, and safety channel, plus there is a unique infinitely variable gain control that allows you to precisely tailor the output as you need.           IN THE BOX :   Rode VideoMic NTG SM7-R Camera Mount Foam Windshield SC10 Cable 1.2m USB-C Cable       FEATURES   Revolutionary acoustic design, delivering unmatched acoustic transparency and a natural, uncoloured sound. Highly directional supercardioid polar pattern and very flat frequency response Unique infinitely variable gain control Auto-sensing 3.5mm output interacts seamlessly with both cameras and mobile devices Class-compliant USB-C output with headphone output for seamless audio monitoring Digital switching – controls high-pass filter, pad, high frequency boost, and safety channel dB peak warning light Internal rechargeable lithium-ion battery provides 30+ hours of recording, charges via USB-C High-quality Rycote® Lyre® shock mounting with cable management and a sliding rail to adjust mic placement on a camera cold shoe. Lightweight (94g) and rugged aerospace-grade aluminium construction       SPECIFICATIONS    Acoustic Principle : Pressure gradient electret condenser Polar Pattern : Supercardioid Frequency Range : 20Hz – 20kHz Frequency Response : 35Hz – 18kHz ±3 dB Output Impedance : 10O Signal to noise Ratio : 79 dBA Dynamic Range : 105dB SPL (A-weighted, as per IEC651) Equivalent Noise : 15dB SPL (A-weighted, as per IEC651) Sensitivity : -26 dB re 1V/Pa (50mV @ 94dB SPL) ± 1dB @ 1kHz Input SPL @ 1% THD : 120dB SPL High Pass Filter Frequency : 75Hz, 150Hz Battery Life : 30+ hours Battery Capacity : 350mAh Output Connection : 3.5mm auto-sensing USB-C Bit Depth : 24-bit Sample Rates : 48kHz OS Requirements : Mac OS 10.12 | Windows 10

Read more less

The VideoMic Me is a high-quality microphone for mobile devices with a 3.5mm headphone input, designed to give you incredible audio when shooting video. The microphone's directionality reduces surrounding noises and focuses on what you're filming, ensuring your videos sound clear and intelligible. The 3.5mm jack provides a headphone output for audio monitoring and playback. The VideoMic Me comes with a clip to ensure the mic is secure and a furry windshield for filming outdoors in adverse weather conditions. Key Features: High-quality microphone for mobile devices with 3.5mm input 3.5mm headphone output for audio monitoring and playback Works seamlessly with the RØDE Reporter App, Camera, and other recording apps Includes furry windshield  Specifications Acoustic & Electrical Specifications Acoustic Principle Pressure Gradient Electret Condenser Active Electronics JFET impedance converter Capsule 0.50" Polar Pattern Cardioid Address Type End Frequency Range 100Hz - 20kHz Maximum SPL 140dB SPL Sensitivity -33.0dB re 1 Volt/Pascal (22.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-Weighted) 20dBA Output Connection 3.5mm TRRS Mechanical Specifications Weight (g) 34 Dimensions (mm) 80 (D) x 38 (H) x 21 (W)

Read more less

The Rode VideoMic GO supercardioid shotgun microphone offers unprecedented convenience and ease-of-use. Completely plug-and-play, this lightweight shotgun mic is powered by your camera's external microphone input - no batteries required. It doesn't skimp on quality, either. When we first heard the VideoMic GO, we were absolutely stunned by the ultra-clean sound afforded by its tight, highly-directional pickup pattern.        Additionally, an integrated Rycote Lyre shockmount isolates the VideoMic GO from bumps and vibrations that could muck up your project. Whether you're working on a television or film set, in a stadium, or on a wildlife preserve, the Rode VideoMic GO supercardioid shotgun microphone's time-saving design will ensure that you never miss a great shot again.             IN THE BOX: - Rode VideoMic GO - Coiled 3.5mm TRS Cable       FEATURES   Supercardioid design delivers a tight, ultra-clean sound Plug-and-play design for battery-free operation Rycote Lyre shockmount provides isolation from bumps and vibrations ABS construction ensures durability and reliability       SPECIFICATIONS   Microphone Type:Shotgun Condenser Polar Pattern:Supercardioid Frequency Response:100Hz-16kHz Max SPL:120dB SPL (1kHz at 1% THD1 Kohm) Signal to Noise Ratio:60dB (A weighted) Self Noise:34dB (A weighted) Length:6.57" Connector:1/8" Weight:0.16 lbs. Power:Camera plug-in Included Accessories:Rycote Lyre shockmountWindshield Manufacturer Part Number:RODVMGO

Read more less

The VideoMicro II is a professional-quality microphone that will instantly elevate the audio of your camera or smartphone. Ultra-compact, lightweight and easy-to-use, it is perfect for run-and-gun filmmaking, content creation, or if you simply want to record better audio for your videos.Key Features: Professional-quality on-camera shotgun microphone Ultra-compact and lightweight – just 39g Annular line tube technology for natural, full-bodied audio Supercardioid polar pattern for highly directional, focused sound No battery required and no complicated switching – incredibly easy to use HELIX™ isolation mount system for superior protection from knocks, bumps and handling noise Deluxe foam and furry windshields and cables for connecting to cameras and smartphones included Rugged all-metal construction Designed and made in RØDE’s state-of-the-art manufacturing facilities in Sydney, Australia

Read more less

The Tripod 2 is a high-quality tripod designed for either tabletop or handheld use. It features a 1/4-inch thread for mounting cameras and other accessories, and comes with a 1/4-inch to 3/8-inch thread adaptor for use with microphones. Two adjustable height settings allow for optimal positioning and stability on a tabletop, and the legs fold together to form an ergonomic grip for handheld vlogging. It also features 1/4-inch thread inserts on the legs for easily mounting additional accessories.Key Features: Three-position tabletop tripod Ergonomic grip for handheld use 1/4-inch thread with 3/8-inch thread adaptor included Additional 1/4-inch thread inserts on legs  SpecificationsMechanical SpecificationsMaterialPlasticColourBlackWeight (g)200Support Weight (kg)Up to 2kg (when the head is at a 90-degree angle and the Tripod 2 is fully extended)Dimensions (mm)Closed:Height: 205Width: 57Extended (52°): Height: 151 Diameter: 229 Fully extended (75°): Height: 109 Diameter: 272

Read more less

The Tripod 2 is a high-quality tripod designed for either tabletop or handheld use. It features a 1/4-inch thread for mounting cameras and other accessories, and comes with a 1/4-inch to 3/8-inch thread adaptor for use with microphones. Two adjustable height settings allow for optimal positioning and stability on a tabletop, and the legs fold together to form an ergonomic grip for handheld vlogging. It also features 1/4-inch thread inserts on the legs for easily mounting additional accessories.Key Features: Three-position tabletop tripod Ergonomic grip for handheld use 1/4-inch thread with 3/8-inch thread adaptor included Additional 1/4-inch thread inserts on legs  SpecificationsMechanical SpecificationsMaterialPlasticColourBlackWeight (g)200Support Weight (kg)Up to 2kg (when the head is at a 90-degree angle and the Tripod 2 is fully extended)Dimensions (mm)Closed:Height: 205Width: 57Extended (52°): Height: 151 Diameter: 229 Fully extended (75°): Height: 109 Diameter: 272

Read more less

The TF-5 represent a new standard in small diaphragm condensers. The all-new capsule is engineered to sub-micron tolerances, giving unprecedented consistency of tone and response. The TF-5 features the hallmark clarity and airiness of other RØDE small diaphragm mics, and adds to this a unique warmth of tone which is often lacking in smaller ‘pencil mics’ of this type, making the TF-5 uniquely versatile.     IN THE BOX :   2 x Rode TF-5 2 x Clip Stereo Bar 2 x Mic Windshield Handbook       FEATURES   Precision-paired small diaphragm cardioid condenser microphones Ultra-low noise Flat frequency response Tight cardioid directivity Warm, accurate sound Suitable for the most critical recording applications Designed in collaboration with Grammy® award winning classical producer and engineer, Tony Faulkner       SPECIFICATIONS    Acoustic Principle : Externally biased condenser Active Electronics : JFET impedance converter with bipolar output buffer Polar Pattern : Cardioid Frequency Range : 20Hz - 20kHz Frequency Response : 30 Hz - 20 kHz ±3dB // 20 Hz - 20 kHz ±4dB Output Impedance : 63O Signal to noise Ratio : 80 dB Equivalent Noise : 14 dB SPL (A-weighted, as per IEC651) Input SPL @ 1% THD : 135 dB SPL (1kHz @ 1% THD, 600O load) Sensitivity : -29 dB re.1 Volt/Pascal or better (35 mV @ 94dB SPL @ 1kHz) Dynamic Range : 112.6 dB (1kHz @ Max SPL) Power Requirements : 7mA @ 48V phantom power

Read more less

The Stereo VideoMic X is the ultimate broadcast-grade stereo microphone for on-camera use. Utilising all-metal construction, it is incredibly robust making it ideal for regular professional use, while also providing high levels of resistance to RF interference. The mic features a matched pair of ½” true-condenser capsules, configured in a stacked X-Y configuration, providing a highly-immersive soundscape. Each capsule is supported by the Rycote® Lyre® shock-mounting system, providing isolation from vibration as well as knocks and bumps.          Digital switching on the rear of the SVMX allows the user to control the level adjustment (-10dB or +20dB), high-pass filter (0/75/150Hz) and an innovative high-frequency boost (+6dB @ XHz) designed to boost the intelligibility of dialogue. In a first for the VideoMic range, professional-grade balanced outputs are available on the side of the body, in addition to the RF shielded 3.5mm stereo output cable. An outer dome structure provides physical protection for the sensitive capsules, while reducing wind noise in the same manner as RØDE’s RedDot-winning Blimp.           IN THE BOX :   Rode Stereo VideoMic X 3.5mm TRS patch cable       FEATURES   Acoustically matched true condenser capsules Rycote® Lyre onboard shock mounting Balanced professional XLR output Heavy-duty, lightweight aluminium construction High Pass Filter 9V or Phantom Power (P48 - via miniXLR) Level adjustment High Frequency Boost Includes SC2 TRS cable, pop shield and wind shield       SPECIFICATIONS    Acoustic Principle : Pressure Gradient Active Electronics : JFET impedance converter Capsule : 0.50" Polar Pattern : Cardioid Address Type : End Frequency Range : 40Hz - 20kHz Output Impedance : 200O Maximum SPL : 143dBSPL Sensitivity : -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) : 12dBA Power Options : 9V Battery | 48V phantom power Weight : 300g Dimensions : 102mmH x 118mmW x 100mmD Output : Minijack Output | TRRS Output

Read more less

FEATURES Rycote® Lyre® shock mounting onboard Broadcast recording quality on-camera microphone All new matched pair 1/2” condenser capsules in XY stereo configuration Improved foam windscreen Ultra lightweight, compact form factor On mic power and EQ controls Two step High Pass Filter (flat, 75Hz) Three position level control (-10dB, 0, +20dB) 9V battery powered - over 100 hours use (alkaline) New Kevlar reinforced braided cable Billeted metal camera shoe mount with 3/8” thread for easy boompole mounting SPECIFICATIONS Acoustic Principle : Pressure Gradient Active Electronics : JFET impedance converter Capsule : 0.50" Address Type : End Frequency Range : 40Hz - 20kHz Output Impedance : 200O Maximum SPL : 134dBSPL Sensitivity : -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) : 18dBA Weight : 116g Dimensions : 134mmH x 80mmW x 115mmD Dimension Packaging Weight : 1.8 kg

Read more less

The SMR is a premium microphone shock mount that utilises the award-winning Rycote® Lyre® suspension system. It provides superior isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone, utilising an innovative 'double lyre' construction. The removable all-metal pop filter is as effective as it is visually striking, providing an integrated solution for plosive protection that is easily washable. The clamping system distributes the load over a large surface area, meaning it is virtually immune to the wear and tear of repeated use. The SMR also features and integrated cable management system. Compatible with all RØDE studio microphones. Key Features: Premium microphone suspension shock mount Rycote Lyre suspension system Integrated metal pop filter In-built cable management clip  Specifications Mechanical Specifications Weight (g) 260 Dimensions (mm) 130 (H) x 220 (W) x 210 (D)

Read more less

The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the Rode Rec app for iOS, or any other audio app of their choice.       By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ‘b’, ‘t’ and ‘p’ sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar® reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.           IN THE BOX:     - Rode SmartLav+ - LAV-CLIP Microphone Mounting Clip - WS-LAV Pop Filter/Wind Shield - Small Pouch         FEATURES       Professional-grade wearable microphone that connects directly to your iOS or Android device Broadcast-grade omni-directional condenser capsule delivers professional-level audio Included foam pop shield blocks ptand b plosives from ruining your sound Durable mounting clip lets you attach your mic to lapelsties or any number of other locations Compatible with audio apps that accept audio from headset inputs such as the RODE Rec App Powered by your mobile device just like any in-line headphone mic             SPECIFICATIONS       Microphone Type:Condenser Polar Pattern:Omnidirectional Diaphragm Size:2.54mm Frequency Response:20Hz to 20kHz Max SPL:110dB SPL (@ 1kHz1% THD into 1K ohm load) Output Impedance:0 ohms Signal to Noise Ratio:67dB (A weighted) Self Noise:27dB (A weighted) Connector:1/8" TRRS Weight:0.01 lbs. Included Accessories:Microphone Mounting ClipPop Filter/Wind Shield Manufacturer Part Number:smartLav+

Read more less

The SM6 is a studio-grade suspension shock mount for RØDE large-diaphragm studio condenser microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Additionally, the SM6 allows for flexible mounting to position your microphone perfectly in any situation. It includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility. Key Features: Studio-grade microphone suspension shock mount Compatible with RØDE large-diaphragm studio condenser microphones  Specifications Mechanical Specifications Weight (g) 682 Dimensions (mm) 210 (H) x 133 (W) x 210 (D)

Read more less

The NT1 5th Generation is a revolutionary studio condenser microphone that fuses the classic sound signature of the iconic NT1 with cutting-edge, next-generation technology. It features RØDE’s groundbreaking (patent-pending) Dual Connect output, offering both XLR and USB connectivity for incredible versatility, a world-first “unclippable” 32-bit float digital output, advanced digital signal processing, and more, all while delivering the same warm, silky character, extremely low noise, and high SPL handling that the NT1 is renowned for. The NT1 5th Generation is a true studio workhorse that excels on everything from vocals and speech, to guitar, piano, drums and percussion – the ultimate studio microphone.Key Features: Large-diaphragm cardioid condenser microphone HF6 1-inch true condenser capsule Smooth frequency response, high sensitivity and high SPL handling Exceptionally low noise (4dBA) – the world’s quietest studio condenser microphone Patent-pending Dual Connect output with both XLR and USB connectivity World-first 32-bit float digital output Ultra-high-resolution (up to 192kHz) analog-to-digital conversion On-board DSP for advanced APHEX® audio processing Studio-grade shock mount and pop filter, XLR and USB cables included Available in black or silver with a rugged aluminium body and high-grade finishes Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia

Read more less

The NT1 5th Generation is a revolutionary studio condenser microphone that fuses the classic sound signature of the iconic NT1 with cutting-edge, next-generation technology. It features RØDE’s groundbreaking (patent-pending) Dual Connect output, offering both XLR and USB connectivity for incredible versatility, a world-first “unclippable” 32-bit float digital output, advanced digital signal processing, and more, all while delivering the same warm, silky character, extremely low noise, and high SPL handling that the NT1 is renowned for. The NT1 5th Generation is a true studio workhorse that excels on everything from vocals and speech, to guitar, piano, drums and percussion – the ultimate studio microphone.Key Features: Large-diaphragm cardioid condenser microphone HF6 1-inch true condenser capsule Smooth frequency response, high sensitivity and high SPL handling Exceptionally low noise (4dBA) – the world’s quietest studio condenser microphone Patent-pending Dual Connect output with both XLR and USB connectivity World-first 32-bit float digital output Ultra-high-resolution (up to 192kHz) analog-to-digital conversion On-board DSP for advanced APHEX® audio processing Studio-grade shock mount and pop filter, XLR and USB cables included Available in black or silver with a rugged aluminium body and high-grade finishes Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia

Read more less

Over the Rode NT1 20-plus-year history we have helped countless recording engineers discover this amazing cardioid condenser microphone - and this latest NT1 model is by far the most impressive one yet! Sporting a mere 4.5dB of self noise the NT1 isn just the quietest studio condenser microphone Rode has produced to date it one of the quietest mics of its type in the world.       IN THE BOX:   - Rode NT1 (NT1 Single) - Microphone Dust Cover - SM6 Shock Mount and Pop Filter - XLR Cable - Limited 1-Year Warranty, Extendable to 10 Years upon Registration     FEATURES   An amazing cardioid condenser microphone that provides studio-quality sound any project studio engineer can afford An excellent choice for recording virtually any acoustic instrumentvoiceor amplifier rig Hand-made HF6 large-diaphragm condenser capsule delivers the smooth sound you expect from a vintage solid-state mic Internal suspension features Rycote Lyre technology to minimize vibration and chassis resonance in all three axises High-grade signal path circuitry offers a staggering 4.5dB of self noisemaking this one of the quietest studio condensers ever Lightweight but durable aluminum body features an incredibly durable baked electrostatic coating with laser-etched lettering Bundle with the Rode SRM combination shock mount and pop screen Lightweight engineering-grade polymer frame with heavy duty joint/clamp makes this shock mount extremely mic stand friendly SRM features Lyre suspension for phenomenal isolation with none of the drawbacks inherent to rubber-band based shock mounts Stainless steel pop screen with silicon damper features a PDV base and baked electrostatic coating for extreme durability Requires +48V phantom power     SPECIFICATIONS   Microphone Type:Condenser Polar Pattern:Cardioid Diaphragm Size:1" Frequency Response:20Hz-20kHz Max SPL:132dB SPL Self Noise:4.5dB (A weighted) Color:Black Connector:XLR Included Accessories:Shock MountPop Screen Manufacturer Part Number:NT1 Kit Dimension Packaging Weight : 3.0 kg

Read more less

FEATURES Acoustic Principle : Externally polarised 25 mm (1") condenser Active Electronics : JFET impedance converter with bipolar output buffer Pickup Pattern : Cardioid Frequency Response : 20Hz ~ 20kHz Output Impedance : 100 Sensitivity : -31.9dB re 1volt/pascal (25 mV @ 94dB SPL) +/- 2dB Equivalent Noise : 5 dBA SPL (per IEC651, IEC268-15) Maximum Output : + 13.7dBu (@ 1% THD into 1k) Dynamic Range : 132dB (per IEC651, IEC268-15) Maximum SPL : 137dB (@ 1% THD into 1K) Signal/Noise : > 88dB (1kHz rel 1 Pa; per IEC651, IEC268-15) Packed Weight : 820 gm (Mic only 326 gm) 2 x Shockmounts included Requires +48V phantom power SPECIFICATIONS Microphone Type : Condenser Mono/Stereo : Stereo Pair Polar Pattern : Cardioid Diaphragm Size : 1" (25.4mm) Frequency Response : 20Hz-20kHz Max SPL : 137dB Output Impedance : 100 ohms Signal to Noise Ratio : 88dB (A weighted) Self Noise : 5dB (A weighted) Color : Silver Connector : XLR Weight : 0.72 lbs. Dimension Packaging Weight : 3.0 kg

Read more less

The MagClip GO is a powerful magnetic clip system that allows for easy positioning of a Wireless GO transmitter on talent. Clothing can be sandwiched between the magnet and clip for total flexibility. It can even be used to place the mic discreetly on an object in a scene or on a stage to capture dialogue.     Key Features: Magnetic clip system for the Wireless GO and Wireless GO II transmitters Allows for total flexibility when placing the Wireless GO on talent

Read more less

The M5 is a high-quality matched pair of small-diaphragm condenser microphones designed for stunning performance in a wide range of recording applications in the studio or on stage. Featuring a 1/2-inch gold-sputtered cardioid condenser capsule with very low noise and a full frequency response, the M5 is equally at home on a range of acoustic instruments, choirs, or anywhere you would employ a small-diaphragm ('pencil') condenser microphone, either individually or in a stereo array. Each matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones and is supplied with WS5 windshields and RM5 stand mounts. Key Features: Matched of pair small-diaphragm cardioid condenser microphones 1/2-inch gold-sputtered capsules Carefully selected pair with no more than 1dB sensitivity variation Very low noise and full frequency response Includes microphone clips and windshields 10-year warranty  Specifications Acoustic & Electrical Specifications Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Polar Pattern Cardioid Frequency Range 20Hz ~ 20kHz Output Impedance 200O Equivalent Noise 19 dBA SPL (as per IEC651) Maximum Output Level +13.5 dBu Sensitivity -34 dB re 1V/Pa (20mV @ 94 dB SPL) ± 2dB @ 1kHz Dynamic Range 121 dB SPL Maximum SPL 140 dB SPL Signal to Noise Ratio 75 dBA SPL (as per IEC651) Power Requirements P24 and P48 Output Connection XLR Balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground) Mechanical Specifications Weight (g) 80 Dimensions (mm) 100 (H) x 20 (W) x 20 (D)

Read more less

The M2 is a rugged condenser microphone that is designed for the ultimate in performance for live vocals. Featuring an internally shock-mounted ½-inch condenser capsule, it delivers a full frequency response for exceptionally detailed voice reproduction on stage and its tight supercaridoid polar pattern ensures a focused sound that minimises spill and feedback. The M2 also features a lockable on/off switch for added versatility.   Key Features: Live performance condenser microphone for vocals High-quality 1/2-inch condenser capsule Tight supercardioid polar pattern Robust, all-metal body Integrated on/off switch with locking screw 10-year warranty  Specifications Acoustic & Electrical Specifications Acoustic Principle Pressure gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.50" Polar Pattern Supercardioid Address Type End Frequency Range 35Hz - 20kHz Output Impedance 50O Maximum SPL 141dB SPL Maximum Output Level 5.2mV (@ 1kHz, 1% THD into 1KO load) Sensitivity -44.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-Weighted) 23dBA Power Requirements P24 or P48 Output Connection XLR Mechanical Specifications Weight (g) 308 Dimensions (mm) Height: 187 Width: 47 Depth: 47

Read more less

The M3 highly versatile end-address condenser microphone is designed to excel in a wide variety of recording situations in the studio, on stage or on location. Featuring an internally shock-mounted 1/2-inch condenser capsule, the M3 can either be powered by P48 phantom power or an internal 9V battery. It offers the versatility of a selectable pad (-10dB, -20dB) and high-pass filter (80Hz), making it ideal for recording everything from electric guitar to vocals to drums.   Key Features: Versatile end-address condenser microphone Cardioid polar pattern Robust, all-metal body Selectable pad (-10dB, -20dB) and high-pass filter (80Hz) 10-year warranty     Specifications Acoustic & Electrical Specifications Acoustic Principle Pressure gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.50" Address Type End Frequency Range 40Hz - 20kHz (selectable high-pass filter @ 80Hz) Output Impedance 200O Maximum SPL 142dB SPL Maximum Output Level 9.2mV (@ 1kHz, 1% THD into 1KO load) Sensitivity -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-Weighted) 21dBA Output Connection XLR Power Requirements 9V battery, P24 or P48 Mechanical Specifications Dimensions (mm) Height: 225 Width: 33 Depth: 33 Weight (g) 390

Read more less

With rock-solid build quality and a high-power neodymium capsule, the RØDE M1 live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a lifetime warranty, following registration of purchase. The M1's ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being heavy, and handling noise is almost completely eliminated by the microphone's internal design.   Featuring a warm response that is incredibly defined for a dynamic microphone, the M1's smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback. Renowned as one of the industry's best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.     IN THE BOX : Padded Zip Pouch Durable Microphone Clip     FEATURES Live dynamic vocal microphone High output neodymium capsule Cardioid polar pattern Balanced, low impedance output Ergonomically designed heavy duty all-metal body Low handling noise     SPECIFICATIONS Acoustic Principle : Dynamic Polar Pattern : Cardioid Address Type : End Frequency Range : 75Hz - 18kHz Output Impedance : 320O Sensitivity : -56.0dB re 1 Volt/Pascal (1.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Weight : 360.00g Dimensions : 171.00mmH x 51.50mmW x 51.50mmD Output : XLR Output

Read more less

With rock-solid build quality and a high-power neodymium capsule, the RØDE M1-S switchable live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a ten year warranty, following registration of purchase. The M1's ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being heavy, and handling noise is almost completely eliminated by the microphone's internal design.         Featuring a warm response that is incredibly defined for a dynamic microphone, the M1's smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback. The addition of an on/off switch adds versatility for artists, engineers and presenters that prefer control while on stage. A flush-mounted lock ensures the microphone cannot be accidentally switched. For additional security the M1-S features an XLR lock that can be used to fix the microphone to the cable. Renowned as one of the industry's best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.           IN THE BOX :   Padded Zip Pouch Durable Microphone Clip       FEATURES   Live dynamic vocal microphone High output neodymium capsule Cardioid polar pattern Lockable on/off switch XLR security lock Ergonomically designed heavy duty all-metal body Low handling noise       SPECIFICATIONS    Acoustic Principle : Dynamic Address Type : End Frequency Range : 75Hz - 18kHz Output Impedance : 320O Sensitivity : -56.0dB re 1 Volt/Pascal (1.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Weight : 360.00g Dimensions : 171.00mmH x 51.50mmW x 51.50mmD  

Read more less

The RØDE Lavalier is a discreet lapel microphone that provides broadcast-quality audio when close-miked in almost any scenario.The Lavalier's low self-noise, user friendly omni-directional polar pattern and minimal appearance make it an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen. The microphone capsule is connected via a 1.2m (4') shielded, Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance.   The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the included cable management clips ensure that you are able to minimise the microphone and cable visibility, while providing maximum mobility for the wearer. The supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories. Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the Lavalier and a wide range of wireless systems as well as consoles, cameras and portable recorders.     IN THE BOX : Rode Lavalier Lapel Microphone Anti-Trauma Case WS-LAV Artificial Fur Wind Shield Microphone Mounting Clip     SPECIFICATIONS Acoustic Principle : Permanently Polarized Active Electronics : JFET impedance converter Capsule : 0.10" Address Type : End Frequency Range : 60Hz - 18kHz Output Impedance : 3000O Maximum SPL : 110dBSPL Maximum Output Level : 189.0mV (@ 1kHz, 1% THD into 1KO load) Sensitivity : -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise (A-weighted) : 25dBA

Read more less

Lavalier GO is a professional-grade wearable microphone designed for use in a wide range of applications. The 3.5mm TRS connector is designed to pair perfectly with the RØDE Wireless GO and most recording devices with a 3.5mm TRS microphone input.         Lavalier GO is designed to perform excellently in any broadcast application. Featuring a discreet 4.5mm omnidirectional microphone, it delivers crystal clear audio in all environments and is incredibly forgiving when it comes to placement on talent, allowing for greater flexibility in fast-paced situations.         A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ‘b’, ‘t’ and ‘p’ sounds), as well as a durable mounting clip with in-built cable management for quick and easy rigging. It also features a hard-wearing Kevlar® reinforced cable, designed to withstand the rigours of any shoot.           IN THE BOX:   - Rode Lavalier GO - Pouch - Mic Clip - Pop Shield       FEATURES   Professional-grade lavalier mic with 3.5mm TRS jack High-quality omnidirectional condenser capsule Discreet 4.5mm miniature microphone Kevlar® reinforced cable       SPECIFICATIONS   Acoustic Principle : Permanently Polarised Condenser Polar Pattern : Omni-directional Frequency Range : 20Hz - 20kHz Output Impedance : 3k O Typical Signal to noise Ratio : 67 dB Equivalent Noise : 27 dB Typical Maximum SPL : 110 dB Sensitivity : -35dB (17.8mV @94dB SPL) Dynamic Range : 83dB Typical Power Requirements : Powered from plug-in power TRS socket (2.7V) Output Connection : Gold-plated TRS plug

Read more less

Lavalier GO is a professional-grade wearable microphone designed for use in a wide range of applications. The 3.5mm TRS connector is designed to pair perfectly with the RØDE Wireless GO and most recording devices with a 3.5mm TRS microphone input.         Lavalier GO is designed to perform excellently in any broadcast application. Featuring a discreet 4.5mm omnidirectional microphone, it delivers crystal clear audio in all environments and is incredibly forgiving when it comes to placement on talent, allowing for greater flexibility in fast-paced situations.         A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ‘b’, ‘t’ and ‘p’ sounds), as well as a durable mounting clip with in-built cable management for quick and easy rigging. It also features a hard-wearing Kevlar® reinforced cable, designed to withstand the rigours of any shoot.           IN THE BOX:   - Rode Lavalier GO - Pouch - Mic Clip - Pop Shield       FEATURES   Professional-grade lavalier mic with 3.5mm TRS jack High-quality omnidirectional condenser capsule Discreet 4.5mm miniature microphone Kevlar® reinforced cable       SPECIFICATIONS   Acoustic Principle : Permanently Polarised Condenser Polar Pattern : Omni-directional Frequency Range : 20Hz - 20kHz Output Impedance : 3k O Typical Signal to noise Ratio : 67 dB Equivalent Noise : 27 dB Typical Maximum SPL : 110 dB Sensitivity : -35dB (17.8mV @94dB SPL) Dynamic Range : 83dB Typical Power Requirements : Powered from plug-in power TRS socket (2.7V) Output Connection : Gold-plated TRS plug

Read more less

The RDE K2 is a premium valve condenser microphone featuring dual 1? gold sputtered diaphragms. Infinitely variable control of the polar pattern from omnidirectional through cardioid and bidirectional/figure-8 provides the freedom and flexibility to excel in any recording situation.      High-performance specifications (including a maximum SPL of 162dB) are combined with the character and subtleties of the legendary mics of the 1950s to provide a microphone that not only provides world-class vocals but is perfectly at home recording a wide range of instruments both up-close or in a wider room capacity.         IN THE BOX:   - Rode K2 - SM2 Shock Mount - RC2 Custom Carry Case - K2 Cable - K2 Power Supply       FEATURES   Largegold-sputtered diaphragm Omnidirectionalcardioidfigure-8and all intermediate polar patterns Continuously variable polar pattern control on dedicated power supply Internal shock mounting for low ambient noise and vibration resistance Wide dynamic range Class A valve circuitry Hand-selected and graded 6922 twin-triode valve User-serviceable with field-replaceable tubes High strength welded and heat-treated steel mesh head Durable satin nickel finish 162 dBA Max SPL 10 dBA Self Noise 150dB Dynamic Range Includes dedicated low noise mic cableRODE caseshock mount       SPECIFICATIONS   Microphone Type:Tube Condenser Polar Pattern:CardioidOmniFigure-8 Diaphragm Size:1" (25.4mm) Frequency Response:20Hz-20kHz Max SPL:162dB Output Impedance:200 ohms Signal to Noise Ratio:81dB (A weighted) Self Noise:10dB (A weighted) Color:Silver Connector:XLR Weight:1.8 lbs. Included Accessories:Shock MountCarry Case Manufacturer Part Number:K2

Read more less

The RØDECaster Pro II is the ultimate audio production solution for content creators, including streamers, podcasters and musicians. Combining revolutionary features with superior sound quality, endless customisability and unmatched ease of use, the RØDECaster Pro II is all you will ever need to record incredible audio for your content.  Key Features: Fully integrated audio production studio for streamers, podcasters, musicians and content creators Ultra-low-noise, high-gain Revolution Preamps™ (-131.5dBV EIN, 76dB gain) Four high-quality Neutrik® combo inputs for connecting microphones, instruments and line-level devices Nine individually assignable channels with six broadcast-quality physical faders and three virtual faders High-performance quad-core audio engine Studio-grade APHEX® audio processing and on-board effects Eight fully programmable SMART pads with bank switching Dual USB-C interfaces for connecting two computers or mobile devices Advanced Bluetooth® connectivity for high-quality phone call integration Multitrack or stereo recording to a microSD™ card, USB storage device or computer Four high-power headphone outputs and balanced ¼-inch line outputs 5.5-inch high-definition touchscreen with haptic feedback and rotary encoder for easy navigation and control New features and enhancements via regular firmware updates Designed and made in RØDE’s state-of-the-art facilities in Sydney, Australia

Read more less

The Lavalier II is a premium lavalier microphone that is ideal for the most demanding audio and video applications. With a revolutionary low-profile design, superior sound quality and professional features, it offers the ultimate performance for everything from broadcast and filmmaking to podcasting and content creation. The Lavalier II pairs perfectly with a wide range of audio devices, including the RØDE Wireless GO II and AI-Micro, and also comes with a premium accessory kit.  Key Features: Premium lavalier microphone for high-quality audio capture in broadcast, filmmaking and content creation applications Revolutionary low-profile design and ultra-compact mounting clip Discreet and easy to conceal Broadcast-grade sound quality with flat frequency response and omnidirectional polar pattern 3.5mm TRS locking connector Premium accessory kit with pop filter, mini furry windshield, mic clip, coloured ID rings and zip case

Read more less

The PSA1+ is the ultimate studio boom arm for podcasters, streamers and broadcasters. Its innovative parallelogram spring design ensures ultra-smooth movement and precise microphone placement in any position, while its fully damped internal springs and neoprene arm cover eliminate mechanical noise for completely silent operation. Integrated cable management ensures your setup is tidy and its extended reach and full 360-degree rotation make it easy to position your microphone exactly where it needs to be. Take your content to the next level.  Key Features: Premium professional studio boom arm for podcasters, streamers, broadcasters, and creators Innovative parallelogram spring design for precise mic placement and ultra-smooth movement Fully damped springs for completely silent operation Superior isolation from keyboard, mouse and desk noise Integrated cable management for both USB and XLR cables Compatible with any microphone or shockmount using a standard thread, weighing between 94g and 1.2kg, including the NT-USB Mini, PodMic, Procaster, Podcaster, Broadcaster and more

Read more less

The RODE PSA1 studio boom arm is perfect for radio,broadcastor ,home use. Designed to fit unobtrusively into your studio this easy-to-use and continuously adjustable boom arm gives you full 360-degree access to your microphone with a stable horizontal and vertical reach of nearly three feet!    The PSA1 can easily accommodate microphones weighing up to 2.4 lbs.making it an ideal desk stand for most broadcast-style microphones. Hook-and-loop wraps keep your cables out of the way and a set of attachments provide multiple mounting options for your RODE PSA1 stand.   IN THE BOX: Rode PSA1 Studio Boom Arm for Broadcast Microphones     FEATURES   An ideal studio boom arm for radio,broadcast and home use Supports most broadcast-style microphone weighing between 1.5 lbs. and 2.4 lbs. such as the RODE Procaster or Podcaster Full 360-degree rotation gives makes positioning your microphone easy Maximum horizontal reach of up to 32" and maximum vertical reach of up to 33" provide ample desk coverage Supplied hook-and-loop wraps keep your mic cables tucked neatly out of the way Desk clamp attachment provides mounting to desks as thick as 2.16" Insert attachment provided for use with standard desk inserts up to 2.75" thick   SPECIFICATIONS   Base Type:Studio Boom Arm Height Type:Short Height:36" Tube Materials:Steel Manufacturer Part Number:PSA1 Dimension Packaging Weight : 3.0 kg

Read more less

The PSA1+ is the ultimate studio boom arm for podcasters, streamers and broadcasters. Its innovative parallelogram spring design ensures ultra-smooth movement and precise microphone placement in any position, while its fully damped internal springs and neoprene arm cover eliminate mechanical noise for completely silent operation. Integrated cable management ensures your setup is tidy and its extended reach and full 360-degree rotation make it easy to position your microphone exactly where it needs to be. Take your content to the next level.Key Features: Premium professional studio boom arm for podcasters, streamers, broadcasters, and creators Innovative parallelogram spring design for precise mic placement and ultra-smooth movement Fully damped springs for completely silent operation Superior isolation from keyboard, mouse and desk noise Integrated cable management for both USB and XLR cables Compatible with any microphone or shockmount using a standard thread, weighing between 94g and 1.2kg, including the NT-USB Mini, PodMic, Procaster, Podcaster, Broadcaster and more

Read more less

The RØDE Procaster is a professional broadcast quality dynamic microphone, specifically designed to offer no-compromise performance for voice applications in the broadcast environment.Featuring a tight polar pattern and tailored-for-voice frequency response, the Procaster is perfect for every application where a great sounding, robust microphone with superior ambient noise rejection is demanded.         The Procaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.Its high output dynamic capsule and balanced low impedance output make it an ideal broadcast and voice over microphone.           IN THE BOX:   - Rode Procaster - RM2 Stand Mount - Padded Zip Pouch       FEATURES   Dynamic mic with XLR connection Ultra-low noise Cardioid polar pattern with high 180-degree rejection Voice tailored low-cut filter Internal pop filter Rugged stainless steel body       SPECIFICATIONS   Microphone Type:Dynamic Polar Pattern:Cardioid Frequency Response:75Hz-18kHz Output Impedance:320 ohms Color:Black Connector:XLR Weight:1.53 lbs.

Read more less

Searching for a broadcast-grade mic for podcasting? Rode’s PodMic delivers the silky, pro quality you demand. Whether your podcast requires raucous screaming or something more intimate, the PodMic will tackle it with ease, delivering a balanced, easy-to-listen-to sound that’s guaranteed to elevate your presentation. Enjoy plosive-free performance, thanks to an integrated pop shield. Benefit from durable, all-metal construction. If you want to capture top-notch vocals, you need a top-notch podcasting mic like the Rode PodMic.           IN THE BOX:   - Rode PodMic Dynamic Podcasting Microphone       FEATURES   Broadcast-grade mic for podcasters Tackles everything from raucous screaming to intimate reading Built-in pop shield minimizes unwanted plosives Robust, all-metal construction and rugged swing-arm mounting Integration with RODECaster Pro podcast production console       SPECIFICATIONS   Microphone Type:Dynamic Polar Pattern:Cardioid Frequency Range:50Hz-13kHz Output Impedance:320 ohms Sensitivity:1.6mV/Pa (-57dB) Color:Black Connector:XLR Dimensions:6.77" x 4.29" Weight:2.06 lbs.

Read more less

The NT-USB+ is a professional USB microphone that makes capturing studio-quality sound super simple. Building on the legacy of the legendary NT-USB with next-generation features, it excels in a wide variety of applications, from recording music to podcasting and streaming. Delivering pristine audio quality with incredible ease of use and premium features, the NT-USB+ will have you sounding like a pro in seconds. Key Features: Professional USB microphone Studio-grade condenser capsule with tight cardioid polar pattern Ultra-low-noise, high-gain Revolution Preamp™ Powerful APHEX® audio processing accessible via RØDE Connect, RØDE Central and RØDE Reporter High-power headphone output with zero-latency monitoring and versatile controls USB-C connectivity with high-resolution analog-digital conversion Detachable pop filter and desktop stand included  Class-compliant USB output that works seamlessly with computers, smartphones and tablets (iOS and Android) Designed and made in RØDE's state-of-the-art facilities in Sydney, Australia

Read more less

The RØDE Podcaster is a dynamic, end-address USB microphone that combines broadcast-quality audio with the simplicity of USB connectivity, allowing recording direct to a computer without the need for an additional digital interface.Including an audiophile quality 18-bit resolution, 48kHz sampling A/D converter, the Podcaster processes all of the analogue-to-digital conversion internally, bypassing the computer's lower quality on-board sound controller altogether.         A headphone output on the microphone body provides zero-latency monitoring, so the user can hear exactly what is being recorded, free of delay or echo.The Podcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.It is fully compatible with Windows 7, Windows 8 and Mac OS X computers, as well as several Linux distributions. The microphone is bus powered and features a status LED to indicate operation.         The Podcaster is ideal for podcasting, vodcasting, YouTube videos, voice recognition software, corporate videos and any production application that requires a simple yet professional voice-over microphone. It is also a convenient demo microphone for musicians and songwriters that prefer the convenience of a USB microphone but don't want to compromise sound quality.It can also be used as an iPad microphone for the Apple iPad (in conjunction with the iPad Camera Connection Kit and a powered USB hub) to provide high quality recording to various iPad audio applications such as Garageband.           IN THE BOX:   - Rode Podcaster - RM2 Ring-Mount - USB Cable (3m/10')       FEATURES   Broadcast Sound Quality 28mm dynamic capsule 18-bit resolution, 8-48kHz sampling Windows and Mac compatible Powered by USB bus Internal capsule shock mounting 3.5mm stereo headphone output with volume control built-in to body Ideal for voice recognition software       SPECIFICATIONS   Acoustic Principle: Dynamic Active Electronics: Analogue signal conditioning + A/D and USB interface Polar Pattern: Cardioid Resolution: 18-bit Sampling Rate: 8-48kHz Address Type: End Frequency Range: 40Hz – 14kHz Output USB: Output Output Impedance: 0O Maximum SPL: 115dB SPL (@ 1kHz, 1% THD into 1KO load) Sensitivity: -51.0dB re 1 Volt/Pascal (2.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz Power Options: USB bus powered Dimensions: 215 x 56 x 52 mm Weight: 655 g

Read more less

The NT-USB Mini is the vanguard of Rode's compact multipurpose microphone revolution. It takes Rode's legendary sound quality and packs it into a simple, versatile package. Since it's a USB mic, it requires no expensive external hardware for operation. Just plug the mic's cable into your computer, and you're ready to get going. You can use it on any platform with any major recording software, thanks to the class-compliant USB output.          You can use Mac, PC, and iOS to stream with your audience, record your podcast, interview, or original music. It has an onboard D/A conversion rate of 24-bit/48kHz to ensure your audio remains clean and clear at all times. You may think that the NT-USB Mini is too good to be true. If you're ready to take your vocal recordings to the next level, the Rode NT-USB Mini can help you get there.           IN THE BOX:   - Rode NT-USB Mini - 2m USB-C Cable - Thread Mount Adapter       FEATURES     All-in-one microphone package that lets you get started recording right away with minimal setup Perfect for Streamers, podcasters, interviewers, content creators, and more Class-compliant USB connectivity provides plug 'n play simplicity Directional cardioid polar pattern picks up more of your voice and less room sound Condenser capsule delivers warm audio reproduction Built-in pop filter combats plosives and unwanted noise Compact footprint fits into the most crowded of studio setups Stereo headphone jack offers zero-latency monitoring 360º swing mount lets you position the mic however you need to Detachable magnetic desk stand provides isolation from knocks and bumps Steel construction resists normal wear and tear

Read more less

The SoundField by RØDE NT-SF1 is a peerless ambisonic microphone that captures broadcast quality 360° surround sound (with height) in A-Format™ on four separate tracks. It is the first collaboration between the pioneering ambisonic brand SoundField (which invented the first commercial ambisonic microphone) and RØDE Microphones. Precision manufactured from solid brass, the NT-SF1 uses four RØDE TF-45C ½” true-condenser cardioid microphone capsules arranged in a tetrahedral array to record the entire spherical sound field. Every sound, every direction, perfectly. Created in-house at RØDE’s Sydney HQ, the TF-45C is machined to tolerances of less than 1 micron in our state-of-the-art fabrication facilities. The result is a capsule with breathtaking clarity, sonic purity and exceptionally low noise.         Whether creating surround audio for video games, sports broadcasts, feature films or Virtual Reality (VR) content, the NT-SF1 is perfect for all surround sound recording and, because it is recorded in A-Format™ and easily converted to B-Format™, able to be manipulated in any direction in post-production. Using the free SoundField by RØDE Plugin, you are the architect of the soundscape and can alter the mic directivity, position and rotation. Create a full 7.1.4 surround mix. Create a fully head-tracked 360-degree soundscape for immersive video. Whether recording opera, a swamp or a feature film, the NT-SF1 offers unparalleled quality and flexibility.           IN THE BOX :   Rode NT-SF1 NT-SF1 Shockmount Pop Shield Dead Cat Mic Cable       SPECIFICATIONS    Acoustic Principle : Externally Biased Condenser Active Electronics : JFET impedance converter with bipolar output buffer Polar Pattern : Cardioid Frequency Range : 20Hz - 20kHz Output Impedance : 63O Equivalent Noise (A-weighted) : 17 dB SPL (as per IEC651) Maximum SPL : 129 dB SPL Sensitivity : -30.4 dB re. 1 Volt/Pascal (30mV @ 94dB SPL, 1kHz) Power Requirements : 6.2mA @ 48V (Per Channel) Phantom Power Frequency Response : 30 Hz - 20 kHz ±3dB // 20 Hz - 20 kHz ±4dB Signal to noise Ratio : 77 dB Input SPL @ 1% THD : 129 dB SPL (1kHz @ 1% THD, 600? load)

Read more less

The NTR couples the legacy and history of microphone technology with the latest in precision manufacturing innovations to deliver one of the world's finest ribbon microphones. Featuring world-class active electronics and a revolutionary ribbon design delivering extended high-frequency response and sensitivity, the NTR is not your average ribbon microphone.       Key Features: Highly sensitive 1.8-micron ribbon element Bi-directional polar pattern Internal shock mounting system Custom designed transformer and active electronics Extended high-frequency response for superior versatility One free ribbon replacement during warranty period

Read more less

Like it’s bigger brother the K2, the RØDE NTK is a premium valve condenser microphone designed to provide incredible detail and warmth in the studio. Its cardioid polar pattern is perfect for most single instrument recording scenarios.  The electronic circuitry complementing this very sensitive transducer includes a hand-selected twin-triode 6922 valve and audiophile grade components.  The result is an ultra-wide dynamic range, low noise, and stunning tube warmth. The NTK's rich valve sound is ideal for vocals, acoustic instruments, drum overheads, guitar amps and pianos IN THE BOX : Rode NTK Ring-Mount Microphone Stand Rugged Microphone Case FEATURES   Large 1” capsule with gold plated diaphragm Class “A” valve circuitry Hand selected and graded 6922 twin-triode valve Dedicated power supply Internal capsule shock mounting High level of RF rejection Ultra low noise Wide dynamic range High strength heat treated steel mesh head SPECIFICATIONS  Acoustic Principle : Pressure Gradient Active Electronics : Valve/tube impedance converter with bipolar output buffer Capsule : 1.00" Polar Pattern : Cardioid Address Type : Side Frequency Range : 20Hz - 20kHz Output Impedance : 200O Maximum SPL : 158dBSPL Maximum Output Level : 29.0mV (@ 1kHz, 1% THD into 1KO load) Sensitivity : -38.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) : 12dBA Power Options : Power supply included Weight : 760.00g Dimensions : 208.00mmH x 55.00mmW x 55.00mmD Output : XLR Output  

Read more less

The NTH-100M is a professional over-ear headset that combines the exceptional sonic performance of the award-winning NTH-100 headphones with a broadcast-quality headset microphone. Whether you're in media or broadcast, podcasting, streaming, gaming or working from home or in the office, the NTH-100M offers crystal-clear voice capture and pristine audio in an incredibly comfortable and sleek package. Key Features: Professional over-ear headset Custom-matched drivers deliver an incredibly accurate frequency response and low distortion Precision-engineered acoustic construction optimised for exceptional detail, clarity and a very natural sound Broadcast-grade microphone for natural voice reproduction and excellent speech intelligibility in any environment Microphone is positioned for optimal plosive rejection for crystal-clear voice capture Alcantara® headband and earcup cushions with revolutionary CoolTech™ gel Fully adjustable headband with FitLok™ locking system Easily detach the microphone via its sturdy locking connector to use as professional monitoring headphones Designed and made using high-grade components in RØDE’s state-of-the-art facilities in Sydney, Australia NTH-Mic headset microphone also available separately Lifetime warranty*

Read more less

The NTH-Mic is a broadcast-quality microphone for the RØDE NTH-100 headphones that transforms them into a professional headset. It delivers natural, highly detailed voice reproduction in a sleek, unobtrusive design, and is optimally positioned to reject plosives, making it ideal for media, broadcast, podcasting, streaming, gaming and working from home or in the office.       Key Features: Broadcast-quality headset microphone Plugs directly into the RØDE NTH-100 headphones, transforming them into a professional headset High-quality condenser capsule delivers clear, natural and highly detailed voice reproduction Easily detachable via a sturdy locking connector Positioned for optimal protection against plosives Low-profile, unobtrusive design Designed and made in RØDE’s state-of-the-art facilities in Sydney, Australia Complete NTH-100M professional over-ear headset also available

Read more less

Professional Over-Ear Headphones The RØDE NTH-100 professional over-ear headphones offer exceptional sonic performance and superior comfort that inspires creativity. Featuring custom-matched drivers that deliver an incredibly accurate frequency response and ultra-low distortion, and a precision-engineered acoustic design optimised for exceptional detail and clarity, they are ideal for all forms of content creation, including music production, mixing and audio editing, podcasting, streaming and location recording. Luxurious Alcantara® cushions with our revolutionary CoolTech™ gel ensure maximum comfort, particularly for long-format content creation, and the fully adjustable headband with our innovative FitLok™ locking system provides the perfect fit every time. Your search for the perfect headphones is over.     Key Features: Custom-matched drivers deliver an incredibly accurate frequency response and low distortion – ideal for monitoring and mixing Precision-engineered acoustic construction optimised for exceptional detail, clarity and a very natural sound Alcantara® earcup and headband cushions for superior comfort Revolutionary CoolTech™ gel reduces wearing fatigue Fully adjustable headband with FitLok™ locking system Unique contoured earcups for superior acoustic performance and comfort, with memory foam cushions for excellent noise isolation Removable cable with locking connector that can be connected to either earcup for maximum flexibility and convenience Designed and made using high-grade components in RØDE’s state-of-the-art facilities in Sydney, Australia Lifetime warranty

Read more less

Based on RØDE's award winning NTG3 shotgun microphone, the NTG8 is a broadcast quality RF-bias shotgun microphone that exhibits increased directionality across a wide frequency response range. This makes the NTG8 the perfect microphone for film, television, sports and outdoor broadcasting, live performance, and any professional distance miking application.    Like the NTG3, the NTG8 features low self-noise, natural sound without colouration both on and off-axis, and RF bias technology to ensure that it is almost completely resistant to high humidity environments which could cause other condenser microphones to fail.         The NTG8 is finished in matte black and supplied with a specially designed shock mount (SM8) that is engineered to provide excellent handling noise isolation, cable management and versatile mounting options for the microphone. A rugged weatherproof aluminium cylinder is also included, providing ultimate protection for the microphone when in transport or storage. The WSNTG8 windshield completes the package, providing light environmental protection.           IN THE BOX :   Rode NTG8 Shock Mount for Long Shotgun Microphones Windscreen Storage cylinder       FEATURES   Superior broadcast sound quality High Sensitivity Super-cardioid polar pattern Highly directional polar response Natural sounding audio both on and off-axis Designed to withstand adverse environmental conditions Extremely low handling noise High level of immunity to radio frequency interference True Condenser (external RF biased)       SPECIFICATIONS    Acoustic Principle : Line Gradient Active Electronics : RF Bias Capsule : 0.50" Polar Pattern : Supercardioid Address Type : End Frequency Range : 40Hz - 20kHz Output Impedance : 25O Maximum SPL : 124dBSPL Maximum Output Level : 8.2mV (@ 1kHz, 1% THD into 1KO load) Sensitivity : -20.0dB re 1 Volt/Pascal (97.50mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) : 8dBA Power Options : 48V phantom power Weight : 345.00g Dimensions : 559.00mmH x 19.00mmW x 19.00mmD Output : XLR Output

Read more less

One of the shortest and lightest-weight shotgun mics in the industry, the Rode NTG5 sets a new standard for location recording professionals. An acclaimed innovator in shotgun mic technology, Rode designed the NTG5 to deliver superior results across a wide range of demanding applications. Whether you’re involved in ENG or booming motion pictures, you’ll appreciate the NTG5’s rugged, ultra-lightweight construction and crystal clear, broadcast-quality sonics.        Featuring a revolutionary acoustic design with circular ports instead of the linear slots found on other shotgun mics, the NTG5 captures dialogue and other sound sources with exceptional transparency and a natural, uncolored sound. With its tailored, linear frequency response, supercardioid pickup with smooth off-axis response, and exemplary low self-noise, the NTG5 is essential kit for your run bag.         IN THE BOX:   - Rode NTG5 - PG2-R Pistol Grip Shock Mount - Small Pouch Bag - RM5 Mic Clip - WS10 Windshield - PG2-R Pro Cable - Foam Windshield       FEATURES   Revolutionary annular line tube technology acoustic design Captures natural, uncolored, broadcast-quality sound Deliver superior results across a wide range of demanding applications Extremely lightweight (2.68 ounces) and short in length (7.99") Tailored frequency response; very low self-noise of just 10dBA Highly directional supercardioid polar pattern with smooth off-axis response RF-bias technology and conformal coating for superior performance and reliability in adverse environmental conditions       SPECIFICATIONS   Microphone Type:Shotgun Condenser Polar Pattern:Supercardioid Frequency Response:100Hz-20kHz (±3dB) Output Impedance:25 ohms Signal to Noise Ratio:84dB Self Noise:10dB SPL A-weighted Power:48V Phantom Power Connector:XLR Length:7.99" Weight:0.17 lbs.  

Read more less

A revised take on a time-tested shotgun mic from Rode the NTG4+ offers you premium broadcast-ready sound and the versatility you need to use it on and off camera. One of the things about this highly directional condenser microphone that really stood out to the engineers here at Live Music is how quiet it is. Part of that has to do with the persistent-state digital switching used to toggle the NTG4+ onboard highpass filter-10dB padand high-frequency boost.           IN THE BOX:   - Rode NTG4+ - RM5 Microphone Clip - Windshield for NTG4 & NTG4+ - Padded Zip Pouch - Micro USB cable       FEATURES   Broadcast-quality sound Low-noise circuitry Fully charged in under two hours via MicroUSB Over 150 hours operation per charge Rugged metal construction Convenient digital switching High-frequency boost Highpass filter (Flat/75Hz) PAD (-10dB) MicroUSB cable included Ten year extended warranty with online registration Requires +48V phantom power or will run on internal rechargeable battery       SPECIFICATIONS   Microphone Type:Shotgun Condenser Polar Pattern:Supercardiod Frequency Response:20Hz-20kHz Max SPL:135dB SPL (1kHz at 1% THD1 Kohm) Output Impedance:200 ohms Self Noise:16dB (A weighted) Low Cut Filter:75Hz Pads:-10dB Length:10.94 Connector:XLR Weight:6.2 oz. Power:Battery/Phantom Manufacturer Part Number:NTG4+

Read more less

The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.           IN THE BOX :   Rode NTG4 Durable Microphone Clip Padded Zip Pouch Windshield     FEATURES   Broadcast sound quality Low noise circuitry Rugged metal construction Convenient digital switching High Frequency Boost High Pass Filter (Flat/75Hz) PAD (-10db)       SPECIFICATIONS    Acoustic Principle : Line Gradient Capsule : 0.50" Polar Pattern : Supercardioid Address Type : End Frequency Range : 20Hz - 20kHz (selected HPF @75Hz) Output Impedance : 200O Maximum SPL : 135dBSPL Sensitivity : -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) : 16dBA Power Options : 12V phantom power | 24V phantom power | 48V phantom power Weight : 126g Dimensions : 225mmH x 22mmW x 22mmD Output : XLR Output

Read more less

The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.       In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.           IN THE BOX:   - Rode NTG1 - RM5 Microphone Clip - WSVM Pop Filter/Wind Shield - Padded Zip Pouch       FEATURES   Super Cardioid. Frequency Range: 20Hz-20kHz selectable HPF @ 80Hz/12dB octave. Maximum SPL: 139dB Broadcast sound quality. Rugged metal contruction. Condenser microphone transducer. Weighing 105 grams approx. (3 oz). Low noise circuitry. Low handling noise. Supplied with stand mount and zip pouch. Designed and manufactured in Australia.       SPECIFICATIONS   Microphone Type:Shotgun Condenser Polar Pattern:Supercardioid Frequency Response:20Hz-20kHz Max SPL:139 dB Output Impedance:50 ohms Signal to Noise Ratio:76dB (A weighted) Self Noise:18dB (A weighted) Low Cut Filter:80Hz (-12 dB/octave) Length:8.54" Connector:XLR Weight:0.23 lbs. Power:Phantom Power Included Accessories:Stand MountWindscreenCarry Bag Manufacturer Part Number:NTG-1

Read more less