The black, 7.9' Rode NTH-Cable is a one-sided, flexible cable for use with the Rode NTH-100 headphones. At one end it a locking connector that securely attaches to either the left or right earcup, and at the other end is a reinforced 3.5mm TRS plug with integrated strain-relief molding for reliable, long-term use. The connectors on each end feature a removable ring that can be replaced with any of the included colored rings for easy cable identification.A threaded 1/4" adapter is included for plugging into professional audio equipment. There is even a rubber seal that can be inserted to protect the earcup connector that is not in use. The NTH-Cable is available in five different colors to help you customize the look of your headphones or to match the colors used on the RODECaster Pro podcast studio and RODEConnect software.Customize Your NTH-100 Headphones Flexible, one-sided cable for use with the Rode NTH-100 headphones High-quality, reliable construction Locking connector attaches to the earcup for complete security Includes threaded 1/4" adapter for use with professional audio equipment Includes Colors ID set—swappable colored rings for easy cable identification

Read more less

The Rode NT45-O omnidirectional microphone capsule is found on the Rode NT4, NT5, NT6 and NT55 microphones. The removable capsule features an omnidirectional polar pattern for a generous pick up area at the front and off-axis sections of the microphone. This capsule replaces lost or damaged capsules. Replacement Capsule for the NT4 / NT5 / NT6 and NT55 Microphones

Read more less

Is your tried and true Rode mic not sounding quite like it used to? Maybe it is time to change out the capsule. If you already have a RODE NT6, NT4, NT5, or NT55 cardioid mic and don't want to spring for another mic, RODE offers the NT45-C capsule as a direct replacement, which will work with the aforementioned RODE mics. Here at GearNuts, we know a mic can wear out just like a good set of tubes or strings, so breathe life back into your beloved mic with a replacement capsule. The RODE NT45 capsules offer a selection of frequency responses and polar patterns in a convenient and easy to use interchangeable format. The capsules are designed for studio recording, live sound reinforcement, and any application where sound quality and mounting flexibility are required. Designed and manufactured in Australia, the NT45-C capsule offers high SPL capabilities with low distortion

Read more less

FEATURES High Quality Synthetic Fur Microphone Windshield Designed to Fit the Lavalier Microphone  Dimension Packaging Weight : 0.12 kg

Read more less

Measures 33 to 81 to (83-205.74cm) Compact and Lightweight  The Rode Mini Boompole is a compact

Read more less

FEATURESSuppresses Wind Noise for the HS1Dimension Packaging Weight : 0.12 kg

Read more less

FEATURES Precision balanced anodized aluminium construction New intuitive lock/release system Ergonomic grip handle SPECIFICATIONS Weight : 396.00g Dimensions : 844.00mmH x 33.00mmW x 33.00mmD Dimension Packaging Weight : 0.6 kg

Read more less

- The Rode MiCon Connector for MIPRO Devices provides seamless integration between the Rode HS1 headset, PinMic, and Lavalier microphones and a wide range of wireless systems.- This connector is designed to connect to the MIPRO transmitters with a 4-pin mini XLR connector.The RØDE MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-10 is designed to connect to MIPRO transmitters with 4-pin mini XLR connector. MIPRO is a registered name and trademark owned by MIPRO Electronics.

Read more less

The Rode MiCon Connector for TRRS Devices & Smartphones provides seamless integration between the Rode HS1 headset, PinMic, and Lavalier microphones and a wide range of wireless systems. This connector is designed to connect to the TRRS devices such as the iPhone, iPad, iPod touch, and selected Android devices. What's in the box: 1xRode MiCon Connector for TRRS Devices & SmartphonesRode MICON-11 MiCon Connector for TRRS Devices & Smartphones

Read more less

The Micro Boompole Pro is a unique, modular boompole that allows location sound engineers to capture audio in confined or difficult spaces. Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine for a maximum reach of 2.2 metres. Using an industry standard 3/8” thread, additional sections can also be used to extend the Micro Boompole Pro to reach to over 3.7m (12').  Features Ultra-lightweight modular boompole 2.2m (7.2') reach, extendable to 3.7m (12') Optimised for VideoMicro

Read more less

FEATURES Artificial fur wind shield for videomic go Designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent Dimension Packaging Weight : 1.2 kg

Read more less

The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-2 is designed to connect to a standard 3.5mm stereo mini-jack, with a power supply of 1V minimum.

Read more less

This Rode MiCon 1 Adapter is intended for use with all Rode headsets and microphones that utilize MiCon connectors, such as the Rode Pinmic and lavalier microphones. The adapter features an 1/8" (3.5mm) locking mini connection for use with compatible bodypack transmitters, such as the Sennheiser SK500 G3, SK300 G3, SK100 G3, SK500 G2 SK300 G2 and SK2 Freeport.

Read more less

Providing unbeatable charge for the RØDE VideoMic Pro+ and Performer Kit TX-M2 microphone, the LB-1 is a powerful addition to the RØDE range. On a full charge, the LB-1 supplies 10 hours of uninterrupted power for the Performer TX-M2 and a massive 100 hours of continuous charge for the VideoMic Pro+. The LB-1 can be charged whilst inserted in both devices via Micro USB – full charge is achieved in 3 hours. The LB-1 ships with the Performer Kit and the VideoMic Pro+, and is also sold separately.  Features Rechargeable Lithium-ion battery Compatible with VideoMIc Pro+ and Performer Kit Long life and quick recharge

Read more less

This Rode MiCon Cable measures 1.2 in length and is intended for use with a wide variety of wireless systems, the Rode HS1 headset microphone, and Rode Lavalier microphones. The cable is shielded and Kevlar reinforced. It's compatible with the HS1-B, the HS1-P, the Rode Lavalier, the PinMic, and the PinMic-Long.

Read more less

This Rode MiCon Cable measures 1.2 in length and is intended for use with a wide variety of wireless systems, the Rode HS1 headset microphone, and Rode Lavalier microphones. The cable is shielded and Kevlar reinforced. It's compatible with the HS1-B, the HS1-P, the Rode Lavalier, the PinMic, and the PinMic-Long.

Read more less

Spend less time miking up talent and more time recording with the Rode MicDrop, a simple, yet effective cable weight that makes it easier to thread the cabling of a lapel mic down through clothing to a body-pack transmitter or recorder. It is compatible with all Rode lavalier microphones and the HS2 headset. Featuring durable brass construction and a satin nickel finish, the MicDrop is an ideal accessory for a camera bag or sound recordist's kit.  Compatible Rode Accessories RODELink Lav Lavalier Lavalier GO SmartLav+ PinMic HS2

Read more less

Ergonomic Headset Mount for RODE Lapel Mics. Spring Steel Construction Rear Cable Management Secure Microphone Hold

Read more less

Ergonomic Headset Mount for RODE Lapel Mics. Spring Steel Construction Rear Cable Management Secure Microphone Hold

Read more less

Ergonomic Headset Mount for RODE Lapel Mics. Spring Steel Construction Rear Cable Management Secure Microphone Hold

Read more less

The LAV-CLIP is an ergonomic and discreet clip mount for the RØDE Lavalier microphone. The LAV-CLIP is supplied in a pack of three.Rode LAV-CLIP Features Ergonomic and discreet lavalier mounting clip Supplied in pack of three

Read more less

For Concealing Rode Lavalier Mics Only Absorbs Noise & Vibration 2 Mounting Points for Redundant Miking Made of Skin-Safe Material  The 10-pack of the invisiLav Discreet Lavalier Mounting System from Rode is designed to conceal Rode smartLav microphones while reducing handling noise and vibrations. Each invisiLav features two mounting points allowing for redundant miking while its flat profile permits for versatility in mounting options. It is made of medical grade, skin-safe material so it can be mounted directly onto the skin without fear of irritation. 10 pieces of skin-safe adhesive are included for attaching the invisiLav to either skin or clothing.

Read more less

For Concealing Rode Lavalier Mics Only Absorbs Noise & Vibration 2 Mounting Points for Redundant Miking Made of Skin-Safe Material  The 10-pack of the invisiLav Discreet Lavalier Mounting System from Rode is designed to conceal Rode smartLav microphones while reducing handling noise and vibrations. Each invisiLav features two mounting points allowing for redundant miking while its flat profile permits for versatility in mounting options. It is made of medical grade, skin-safe material so it can be mounted directly onto the skin without fear of irritation. 10 pieces of skin-safe adhesive are included for attaching the invisiLav to either skin or clothing.

Read more less

The DeadWombat is a high-performance windshield for the RØDE Blimp. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. A draw-cord system allows the windshield to be pulled tight over the Blimp to ensure the fur material does not flap, and no wind enters through the opening.  Features High-performance wind cover for the RØDE Blimp For use in high-wind conditions Acoustically transparent synthetic fur

Read more less

FEATURES Furry High-Wind Microphone Cover Minimizes Wind Noise Remains Acoustically Transparent Compatible with Stereo VideoMic SPECIFICATIONS Weight : 25.00g Dimensions : 80.00mmH x 80.00mmW x 80.00mmD Dimension Packaging Weight : 0.6 kg

Read more less

The GN1 is a miniature gooseneck microphone stand for the RØDE NT6. When combined with the swivel mount supplied with the NT6, the GN1 allows for total flexibility when positioning the microphone’s remote capsule. Features Miniature gooseneck mount for the RØDE NT6 Allows for total flexibility when positioning the NT6 remote capsule

Read more less

FEATURES For VideoMic Pro with Lyre Shock-Mount Minimizes Wind-Noise Acoustically Transparent Dimension Packaging Weight : 0.6 kg

Read more less

FEATURES For VideoMic Pro with Lyre Shock-Mount Minimizes Wind-Noise Acoustically Transparent SPECIFICATIONSMaterial : Faux FurDimension Packaging Weight : 0.6 kg

Read more less

The Rode CLIP1 MiCon Cable Management Clips are a set of three MiCon cable clips used to secure the cables to shirt collars and other articles of clothing. The CLIP1 keeps MiCon cables secure, with just enough slack for free head movement, without associated cable noise

Read more less

FEATURES Synthetic fur windscreen with foam inner braid Protects against noise up to wind force 5 Dimensions (W x D x H): 80 x 80 x 200 mm Dimension Packaging Weight : 0.6 kg

Read more less

FEATURES Secures Cable on Boompoles SPECIFICATIONS Weight : 20.00g Dimensions : 150.00mmH x 130.00mmW x 10.00mmD Dimension Packaging Weight : 0.12 kg

Read more less

FEATURES Greatly reduces handling and wind noise for shotgun microphones up to 12.75" long Adjustable dual hoop suspension system isolates mic to reduce unwanted noise New lighter-weight design makes hand- and boom-holding easier than ever Mogami tail cable with Neutrik connectors for crystal clear recordings Dead Wombat windshield included Can be used with third party shotgun microphones SPECIFICATIONS Type:Windscreen with Shockmount Material:Thermoplastic Color:Gray Dimension Packaging Weight : 3.6 kg

Read more less

FEATURES Suitable for Shotgun Microphones Lightweight Extends from 2'.8" to 10' Five Sections SPECIFICATIONS Weight : 535g Dimensions : 810mmH x 40mmW x 40mmD Dimension Packaging Weight : 0.6 kg

Read more less

The RØDE Boompole is a precision balanced professional boom pole for location recording, machined from high grade, lightweight aluminium. The Boompole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Extends from 0.84m (33") to 3m (10')IN THE BOX :Limited 1-Year WarrantyFEATURES Lightweight aluminium construction New ultra smooth extension and retraction system Easy to use locking mechanism Precision balanced SPECIFICATIONS Weight : 940.00g Dimensions : 3232.50mmH x 40.00mmW x 40.00mmD Dimension Packaging Weight : 0.6 kg

Read more less

The Rode Boompole Bag (Black) is a neoprene case designed to carry a boompole with shotgun mic, softie and shock mount. The case has an inside pocket and is carried by the included adjustable shoulder strap.Neoprene case made to carry a boompoleInside pocketAdjustable shoulder strap is includedFits boompole, shotgun mic, softie and shock mount (sold separately)

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6 Behind the protective mesh grille, the mic features Rode's 1" gold-sputtered HF6 capsule, designed to provide a detailed midrange response with smooth highs and warm bass. The cardioid polar pattern focuses audio capture on the source in front of the mic, picking up less unwanted ambient sound from the back and sides. The transducer itself is suspended inside the microphone, using Rycote's industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide an extremely low noise level. The NT1 Signature Series is an incredibly quiet microphone, measuring only 4 dBA of self-noise. The mic is powered by phantom power through the XLR connector.

Read more less

The Rode DS2 is a compact desktop studio arm designed for quiet and flexible microphone positioning in podcasting spaces, broadcast radio studios, voiceover studios, and similar environments. The DS2 features a heavy base designed to balance and support microphones weighing up to 31.7 oz, so there's no need for clamps or mounting equipment. The boom arm offers two adjustable pivot points that extend up to 15" vertically, allowing you to easily position your mic for optimal results. Cable management guides are provided to keep your setup neat and tidy. A 3/8" to 1/4" thread adapter is also provided, allowing you to mount a wide range of different screw threads.  Use for mics, lights, phones, and camerasSupports up to 31.7 ozHeavy base requires no clamp or mountingTwo pivot points for flexible, accurate positioning15" vertical reachLow-noise operationIncludes 3/8 to 1/4" adapter

Read more less

The Charge Case for Wireless GO II is a convenient solution to securely storing, transporting and recharging your wireless kit on the road or at home. It can fit two transmitters and a receiver and top up all three units with an extra two full charges, giving you up to 21 hours of use. With a durable exterior and an innovative zip-up design, the Charge Case will not only keep your Wireless GO II topped up, it will also ensure it's kept safe and secure whether you’re at home or between shoots.  Key Features: Custom charging case for the Wireless GO II Fits three Wireless GO II units – two transmitters and a receiver Provides an additional two recharges for up to 21 hours of use Rugged protective case with a zip to keep your Wireless GO II kit safe and secure Charging status LED

Read more less

The RØDE Backpack is a custom-designed carry bag for the RØDECaster series, including the RØDECaster Pro or RØDECaster Pro II. Made from high-quality materials, including a soft, durable Alcantara® handle, ballistic nylon straps and water-resistant exterior, it is rugged and hard-wearing. It can accommodate a RØDECaster Pro or Pro II, plus microphones, studio arms and other accessories, as well as laptops up to 16 inches. Ergonomic adjustable shoulder straps with back and chest support ensure absolute comfort, with exterior pockets and compartments providing additional storage.Key Features: Designed to securely transport the RØDECaster Pro or RØDECaster Pro II Safely stores microphones, mounts, cables and other accessories Dedicated padded laptop compartment that can fit laptops up to 16-inches Modular and padded equipment compartments for safely organising equipment Constructed from rugged, durable and luxurious materials, including a water-resistant exterior, ballistic-grade nylon and Alcantara® carry handle Lightweight design with ergonomic shoulder straps, back support and sternum strap Spacious 18L internal capacity with multiple compartments, pouches and attachment points Sleek and understated black design for a stylish and discreet aesthetic

Read more less

The Streamer X is a professional video capture card, audio interface and control surface integrated in one compact device that makes creating incredible content incredibly easy. It features studio-grade audio inputs for XLR microphones and instruments, headsets and RØDE wireless microphones, with an ultra-low-noise, high-gain Revolution Preamp™ and powerful APHEX® audio processing delivering pristine sound quality. HDMI connections offer up to 4K30 streaming and 4K60 pass-through for incredible video quality in a wide range of applications, from streaming and gaming, to podcasting and content creation, to business presentations. Dual USB-C connections seamlessly accommodate dual PC setups, and four fully customisable SMART pads allow for on-the-fly triggering of sound or voice FX and other actions on a computer. The ultimate all-in-one streaming solution.  Key Features: Professional audio interface, video capture card and control surface integrated in one compact, easy-to-use device Up to 4K30 video capture and 4K60 pass-through via HDMI Variable Refresh Rate (VRR) support Neutrik® combo jack for connecting XLR microphones or instruments, with an ultra-low-noise, high-gain Revolution Preamp™ for pristine audio quality 3.5mm TRRS input for connecting headsets and 1/4-inch headphone output for zero-latency monitoring Integrated wireless receiver for connecting RØDE Series IV wireless microphones, including the Wireless GO II and Wireless ME Internal DSP for advanced audio processing powered by APHEX® Four fully customisable SMART pads for triggering sounds, voice effects and MIDI commands Dual USB-C interfaces for connecting to two computers or consoles Easy configuration and control via RØDE Central desktop companion app Compatible with free UNIFY streaming software for advanced audio routing, mixing and configuration Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia

Read more less

Every content creator needs a good mixer. So why not get one that’s incredibly powerful, compact, and gives you plenty of bang for your buck? Live Music Centre is proud to introduce the RodeCaster Duo from RODE. This digital streaming mixer handles seven audio channels and has four physical faders. You get stereo I/O, thanks to two Neutrik combination inputs with low-noise Revolution preamps and stereo outs. Next, onboard APHEX processing and effects ensure that any user delivers a studio-quality sound. This mixer is packed with useful features, too. Six customizable SMART pads trigger sound effects and functions. At the same time, the onboard wireless receiver and Bluetooth connectivity cut down on cabling. Finally, the mixer has two USB-C interfaces, making it compatible with dual-PC setups.  Features:Compact and powerful production studio for podcasters and creatorsDual USB-C interfaces help the mixer integrate into any setup2 Neutrik combo inputs handle mics, instruments, and line-level sourcesRevolution preamps deliver 76dB of gain to drive stubborn microphones4 physical faders (plus 3 virtual faders) provide quick control of levelsOnboard APHEX DSP polishes your sound to perfection6 programmable SMART pads let you trigger sound effects and other featuresBuilt-in wireless receiver for connecting RODE Series IV wireless productsBluetooth connectivity supplies seamless audio streaming from a smartphone or tablet

Read more less

The PodMic USB is an ultra-versatile dynamic microphone ideal for podcasting, streaming, gaming, voice overs, and other speech applications for content creation. It delivers rich, full-bodied sound and features both an XLR and USB output for connecting to an audio interface or mixer like a classic broadcast microphone, or directly to a computer for plug-and-play recording. The digital USB output features RØDE’s ultra-low-noise, high-gain Revolution Preamp™ and powerful APHEX® digital signal processing for capturing studio-quality sound with ease, and a zero-latency headphone output complete with level control, making recording seamless. For even more versatility, the PodMic USB is also fully compatible with iOS and Android mobile devices, offering a high-quality portable podcasting or streaming solution.  Key Features: Broadcast-quality dynamic microphone Analog XLR and digital USB-C connectivity Fully compatible with Windows and Mac computers, and iOS and Android devices On-board DSP for advanced APHEX® audio processing Ultra-low-noise, high-gain Revolution Preamp™ Built-in headphone output with volume control and zero-latency monitoring Compatible with RØDE’s suite of software – RØDE Connect, RØDE Central, RØDE Capture and UNIFY Integrated swing mount for simple and secure positioning Internal pop filter for minimising plosives and internal shockmount to reduce vibrations Studio-quality external pop filter included Robust, all-metal construction – incredibly rugged and highly durable Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia

Read more less

The Rode X XDM-100 is a USB-C microphone, featuring advanced DSP and a built-in high-gain preamp for gaming and streaming applications. The microphone's dynamic capsule is designed to be positioned close to the subject and picks up less unwanted sounds and room reflections from further away, making the XDM-100 well suited for use in untreated rooms and home studios. In addition, the cardioid polar pattern focuses audio capture in front of the mic, picking up less sound from the back and sides for a cleaner and clearer vocal sound. Microphone Primary Applications Podcast, Conferencing Form Factor Stand/Boom Mount Intended Sound Sources Vocals, Speech/Voice Over Sound Field Mono Capsule Dynamic Polar Pattern Cardioid Circuitry Solid-State Pad None High-Pass Filter None Tone Adjustment None Gain Adjustment None On-Board Controls Headphone Volume Performance Frequency Range 20 Hz to 20 kHz Connectivity Output Connectors (Analog) None USB & Digital Output 1 x USB-C Female (on Mic) Headphone Output 1 x 1/8" / 3.5 mm Wireless Connectivity None Bluetooth None Digital Audio A/D Conversion 24-Bit Sample Rate 48 kHz OS Compatibility macOS 10.12 or LaterWindows 10*As of October, 2022: Check with manufacturer for the most up-to-date compatibility Power Bus Power USB Physical Color Black Mounting Mounting Thread (via Integrated Hardware)Shockmount (with Included Hardware) Mounting Thread Size 5/8"-27 Female Included Case None Included Filters Pop Filter Dimensions ø: 2 x L: 8.4" / ø: 52 x L: 213 mm Weight 1.5 lb / 700 g Packaging Info Package Weight 4.315 lb Box Dimensions (LxWxH) 11.1 x 8.3 x 4.6"

Read more less

The XCM-50 is a side-address microphone, meaning you should aim your voice directly at the front of the grille. Being a condenser microphone, it is sensitive and highly detailed. This means you can place it a little further away from your mouth than other microphone types, such as a dynamic, without losing clarity and presence. Roughly a handspan (4-8 inches) is a good distance to aim for. This will ensure you are heard clearly without the risk of capturing plosives (loud puffs of air caused by hard syllables starting with ‘p’, ‘b’ and other consonants hitting the microphone capsule). There is an internal pop shield for plosive protection, so you should not experience any issues at this distance.     Item Weight 1.08 pounds Product Dimensions 8.25 x 7.35 x 3.6 inches Country of Origin Australia ASIN B0BF8ZVNWB Item model number XCM-50 Batteries 1 Lithium Ion batteries required. Customer Reviews 4.1 out of 5 stars 4.1    31 ratings 4.1 out of 5 stars Best Sellers Rank #11,850 in Musical Instruments (See Top 100 in Musical Instruments)#195 in Multipurpose Condenser Microphones Date First Available October 26, 2022 Color Name Black Compatible Devices Headphone Connector Type USB Power Source Corded Electric

Read more less

The Universal Vlogger Kit contains everything you need to get professional results when filming using your mobile phone with a 3.5mm headphone socket. The VideoMicro connects directly to your device, delivering crisp, clear, directional sound for any application. The SmartGrip secures your device firmly in place for stable recording and connects seamlessly to the Tripod 2 for either handheld or tabletop use, while the MicroLED ensures all your shots are perfectly lit. The Universal Vlogger Kit comes with the DCS-1 dual cold shoe mount for quick and easy mounting of both the VideoMicro and MicroLED, a Rycote Lyre shock mount and WS9 furry windshield for filming outdoors and in adverse weather conditions. Key Features: Complete mobile filmmaking kit Directional sound pickup to reduce background noise MicroLED light offers over four hours operation on a single charge Three-position tripod for handheld or static use Gimbal tripod head for accurate camera positioning All-metal mount with rubberised grips for phones 65mm to 85mm wide Dual cold shoe mount included   Specifications VideoMicro Acoustic Principle Pressure gradient Polar Pattern Cardioid Frequency Range 100Hz - 20kHz Signal to Noise Ratio 75 dBA Equivalent Noise 20 dBA SPL (A-weighted as per IEC651) Maximum SPL 140 dB SPL (1 kHz @ 1m) Sensitivity -33dB re 1V/Pa (22mV @ 94dB SPL) ± 2dB @ 1kHz Dynamic Range 120dB SPL Acoustic Principle Plug-in power required (2V-5V DC) Microphone Output 3.5mm TRS mini-jack (dual mono) SC7 Cable Output 3.5mm TRRS mini-jack (suitable for mobile devices) MicroLED Connectivity USB Type-C Battery Usage Time (mins) Maximum Brightness: Up to 52 High Brightness: Up to 75 Medium Brightness: Up to 105 Low Brightness: Up to 255 Lumens (LUX) Maximum Brightness: 300 High Brightness: 230 Medium Brightness: 160 Low Brightness: 60 Power Requirements 5V DC, 2A

Read more less

The USB-C Vlogger Kit contains everything you need to get professional results when filming using your USB-C equipped mobile phone.The VideoMic Me-C microphone connects directly to your device, delivering crisp, clear, directional sound for any application. The SmartGrip secures your device firmly in place for stable recording and connects seamlessly to the Tripod 2 for either handheld or tabletop use, while the MicroLED ensures all your shots are perfectly lit.The Vlogger Kit comes with a mic clip to ensure the mic is secure and a furry windshield suitable for filming in outdoor and adverse weather conditions.The VideoMic Me-C is compatible with most mobile devices that have a USB-C input and the latest Android operating system (Android OS 10 or higher).Key Features:   Complete mobile filmmaking kit Directional sound pickup to reduce background noise MicroLED light offers over four hours operation on a single charge Three-position tripod for handheld or static use Gimbal tripod head for accurate camera positioning All-metal mount with rubberised grips for phone 65mm to 85mm wide   SpecificationsMicroLEDConnectivityUSB Type-CBattery Usage Time (mins)Maximum Brightness: Up to 52High Brightness: Up to 75Medium Brightness: Up to 105Low Brightness: Up to 255Lumens (LUX)Maximum Brightness: 300High Brightness: 230Medium Brightness: 160Low Brightness: 60Power Requirements5V DC, 2AVideoMic Me-CAcoustic PrinciplePressure gradient electret condenserPolar PatternCardioidFrequency Range20Hz - 20kHzSignal to Noise Ratio74.5 dBAEquivalent Noise19.5 dBA SPL (A-weighted as per IEC651)Maximum SPL115 dB SPL (1 kHz @ 1m)Power RequirementBus powered USB device 5VDC-100mAAnalog Outputs3.5mm headphoneDevice ConnectivityUSB Type-CSimultaneous I/O1 in, 2 outBit Depth24-bitSample Rates44.1 and 48 kHzDirect MonitorYesBus PoweredYesAndroid RequirementsAndroid OS 10 or higher

Read more less

The iOS Vlogger Kit contains everything you need to get professional results when filming using your iPhone. The VideoMic Me-L microphone connects directly to your device, delivering crisp, clear, directional sound for any application. The SmartGrip secures your device firmly in place for stable recording and connects seamlessly to the Tripod 2 for either handheld or tabletop use, while the MicroLED ensures all your shots are perfectly lit. The Vlogger Kit comes with a mic clip to ensure the mic is secure and a furry windshield suitable for filming in outdoor and adverse weather conditions. The VideoMic Me-L is compatible with all Apple iOS devices with a Lightning port and running iOS 11 or higher. Key Features:   Complete iPhone filmmaking kit Directional sound pickup to reduce background noise MicroLED light offers over four hours operation on a single charge Three-position tripod for handheld or static use Gimbal tripod head for accurate camera positioning All-metal mount with rubberised grips for phone 65mm to 85mm wide   Specifications VideoMic Me-L Acoustic Principle Pressure Gradient Electret Condenser Polar Pattern Cardioid Frequency Range 20Hz - 20kHz Signal to Noise Ratio 74.5 dB Equivalent Noise 19.5 dBA SPL (as per IEC651) Maximum SPL 115 dB SPL (1kHz @ 1m) Power Requirements Powered by iOS device Analog Outputs 3.5mm headphone Device Connectivity Lightning connector Simultaneous I/O 1 in, 2 out Bit Depth 24-bit Sample Rates 44.1 and 48kHz Direct Monitor Yes Bus Powered Yes OS Requirements iOS 11 or higher MicroLED Connectivity USB Type-C Battery Usage Time (mins) Maximum Brightness: Up to 52 High Brightness: Up to 75 Medium Brightness: Up to 105 Low Brightness: Up to 255 Lumens (LUX) Maximum Brightness: 300 High Brightness: 230 Medium Brightness: 160 Low Brightness: 60 Power Requirements 5V DC, 2A

Read more less