The KT-USB network module provides a multichannel bidirectional USB digital audio interface, compatible with both the Klark Teknik DN9650 and DN9652 Network Bridges and the Midas NEUTRON-NB Dual Network Bridge Expansion Module for the industry-leading NEUTRON High Performance Audio System Engine. Featuring up to 48 or 24 bidirectional channels at 48 kHz or 96 kHz respectively for simultaneous audio and playback, KT-USB is the ideal computer audio solution for Midas PRO Series digital consoles and requires only a single standard USB cable to connect to either a Mac* or PC running any industry standard digital audio workstation software. KT-USB is designed for simplicity of use, and just requires selection of its sampling rate via the host unit. Panel-mounted LED indicators show the selected sample rate. KT-USB features a class-compliant USB 2.0 interface and no additional software drivers are required for use with Apple Macs. An ASIO* 2.2 compliant software driver is available for Windows PC computers. KT-USB is electrically and mechanically compatible with the industry standard Cirrus CM-1 format. FEATURES USB 2.0 network module with up to 48 bidirectional channels @ 48 kHz and 24 bidirectional channels @ 96 kHz Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module Simultaneous computer audio recording and playback LED indication of sample rate

Read more less

The KT-DANTE64 network module provides Audinate Dante compatibility for the Klark Teknik DN9650 and DN9652 Network Bridges, and features up to 64 or 32 bidirectional channels at 48 kHz or 96 kHz respectively. KT-DANTE64 offers high performance direct-to-computer audio recording, flexible routing and true Plug and Play technology with low latency, low jitter and sub-microsecond synchronisation. Dante is Internet Protocol (IP) compliant which allows operation over conventional Ethernet networks running on off -the-shelf computer networking hardware, and does not require dedicated network infrastructure. Dante’s Zero configuration protocol allows Dante-enabled devices to identify and configure themselves automatically when connected to a network. Dante-enabled devices discover one another over the network and learn each other’s capabilities, including the number of input and output channels, sample rates and bit depths supported. A Dante-enabled device connected to a network will also automatically setup its own network configuration. KT-DANTE64 is electrically and mechanically compatible with the industry standard Cirrus CM-1 format. FEATURES Audinate Dante* network module for Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module Enables multichannel recording and playback through Dante Virtual Soundcard (PC or Mac* computer) Primary and secondary Ethernet interfaces for dual-redundant Dante networking Operates from internal Dante network Precision Time Protocol (PTP) clock or external clock via host unit Optional Dante Controller software for remote configuration (PC or Mac computer) LED indicators monitor network activity and speed Designed and engineered in England

Read more less

The KT-AES50 network module provides a dual port AES50 digital audio interface, compatible with both the Klark Teknik DN9650 and DN9652 Network Bridges and the Midas NEUTRON-NB Dual Network Bridge Expansion Module for the industry-leading NEUTRON High Performance Audio System Engine. Featuring up to 48 bidirectional channels at both 48 kHz or 96 kHz sample rates, with dual port redundancy in 48 kHz systems, KT-AES50 enables the interconnection of two AES50 networks operating at 96 kHz and 48 kHz respectively, as well as providing expanded AES50 channel counts in either 48 kHz or 96 Hz AES50 networks. KT-AES50 is designed for simplicity of use, and can operates from the incoming AES50 clock or an external clock via host unit. Panel-mounted LED indicators show the connection status for both AES50 ports. KT-AES50 is electrically and mechanically compatible with the industry standard Cirrus CM-1 format. FEATURES Dual port AES50 network module with up to 48 bidirectional channels @ 48 kHz and 96 kHz Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module 48 channel dual redundant operation @ 48 kHz Independent 24 channel operation on each port @ 96 kHz Operates from incoming AES50 clock or external clock via host unit LED indicators display AES50 connection status Designed and engineered in the U.K.

Read more less

The KT-MADI network module provides MADI compatibility for the Klark Teknik DN9650 and DN9652 Network Bridges, and features up to 64 or 32 bidirectional channels at 48 kHz or 96 kHz respectively. KT-MADI offers high performance point-to-point links over both industry standard optical fibre and coaxial copper connections, and is ideally suited to interface with third party recording and playback equipment. KT-MADI features dual redundant operation with automatic failover to the coaxial copper interface in the event of a failure with the optical fibre interface. The KT-MADI network module can act as MADI clock master, MADI clock slave or can synchronise to one of the available external clock sources in either the Klark Teknik DN9650 or DN9652 host unit. KT-MADI is electrically and mechanically compatible with the industry standard Cirrus CM-1 format. FEATURES MADI (AES10-compliant) network module with up to 64 bidirectional channels @ 48 kHz and 32 bidirectional channels @ 96 kHz Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module Operates up to 500 m over optical fibre link and 200 m over coaxial copper link Optical transmission on SC-Duplex* connector Copper transmission on 75 ohm coaxial BNC connectors Dual-redundant operation with failover from optical to copper connections Operates as either MADI clock master, MADI clock slave or from external clock via host unit Designed and engineered in the U.K.

Read more less

The AIR LINK DW 20BR Bluetooth Wireless Stereo Receiver brings the convenience of high-performance audio-streaming to any installed or portable sound system, making it ideal for hospitality and event spaces, as well as retail, home audio, and much more. Featuring a maximum wireless range of 100 feet (30 m), DW 20BR is easy to use and utilises premium-grade Neutrik balanced XLR and unbalanced 1/4" TRS connectors to cover a wide range of audio applications. Thanks to its high headroom design, the DW 20BR receiver provides pristine audio streaming that is far superior to competing products. Care has been taken in both the design process and component selection to ensure the highest-quality performance in its class. FEATURES Stereo receiver to wirelessly stream Bluetooth* to any audio system Perfect for hospitality and event spaces, retail and home audio, etc. High headroom design offers superior sound quality Maximum wireless range 100 feet (30 m) External, articulating antenna ensures optimum transmission and reception Aluminium extrusion casing with protective rubber corners Floor and wall mount brackets for fixed installation (included) High quality Neutrik* XLR and 1/4" TRS connectors Compact and rugged design 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Configuration: Receiver Analog/Digital: Digital Number of Receivers: 1 Receiver Frequency Range: 2.4 GHz Range: 100 ft. Line-of-sight Antenna Type: Detachable Receiver Type: Table Top, Floor/Wall mount (with included brackets) Front Panel Display: No Frequency Response: 20Hz-20kHz Signal/Noise Ratio: >90dB (A weighted) Outputs: 2 x XLR, 2 x 1/4" Power Source: 12V DC power supply (included) Height: 2.5", 8.3" (including antenna) Width: 4.6" (with bumpers) Depth: 5" (with bumpers and antenna) Weight: 1.3 lbs.

Read more less

If ever there is an official “Audio Technology Hall of Fame”, it will definitely include a shrine to the legendary Pultec EQP-1A. We pay homage to this audio-processing pioneer that has graced so many recordings, with our EQP-KT Classic Tube Equaliser. And while vintage Pultec units are extremely rare and expensive, the EQP-KT is amazingly affordable – and designed for the 21st Century. Mastering quality equalisation, at a price point that makes the EQP-KT equally at home in your studio – and your live rack! FEATURES Single-channel, two-band equaliser based on the classic Pultec* EQP-1A Class A, all discrete circuitry for highest signal integrity Premium selection 12AX7 and 12AU7 tubes Custom-built Midas input and output transformers Switchable frequency selectors with up to 7 frequency points Independent boost and cut controls provide immense creative potential Variable bandwidth control for wide sound sculpting Inductor based equaliser section Bypass feature allows for A/B comparison Transformer balanced inputs and outputs on Neutrik* XLR connectors Rugged 2U rackmount chassis for durability in portable applications Auto-ranging universal switch-mode power supply 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Type: Tube EQ Number of Channels: 1 Tube: 12AX7, 12AU7 Number of Bands: 2-band Q Type: Variable Freq Range High: 5kHz, 8kHz, 10kHz, 12kHz, 16kHz Freq Range Hi-Mid: 3kHz, 4kHz Freq Range Mid: 800Hz Freq Range Lo-Mid: 200Hz, 400Hz Freq Range Low: 20Hz, 30Hz, 60Hz, 100Hz Inputs: 1 x XLR, 1 x 1/4" Outputs: 1 x XLR, 1 x 1/4" Rack Spaces: 2U

Read more less

When used in conjunction with DW 20R Wireless Receivers, the AIR LINK DW 20R Wireless Stereo Transmitter brings the convenience of high-performance audio-streaming to any installed or portable sound system, making it ideal for hospitality and event spaces, as well as retail, home audio, and much more. Featuring a maximum wireless range of 100 feet (30 m), DW 20R is easy to use and utilises premium-grade Neutrik balanced XLR and unbalanced 1/4" TRS connectors to cover a wide range of audio applications. FEATURES Stereo transmitter to wirelessly stream audio (together with separate DW 20R) Perfect for hospitality and event spaces, retail and home audio, etc. Able to broadcast to multiple receivers (not included) Digital 2.4 GHz wireless connectivity offers superior sound quality High headroom design offers superior sound quality Maximum wireless range 100 feet (30 m) External, articulating antenna ensures optimum transmission and reception Aluminium extrusion casing with protective rubber corners Floor and wall mount brackets for fixed installation (included) High quality Neutrik* XLR and 1/4" TRS connectors 2.4 GHz ISM band operation allows license-free use on a worldwide basis Compact and rugged design 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Configuration: Transmitter Compatibility: DW 20R receiver Analog/Digital: Digital Transmitter Frequency Range: 2.4 GHz Form Factor: Table Top, Wall Mount Connector Type: 2 x XLR, 2 x 1/4" System: Operating Range: 100 ft. Line-of-sight Frequency Response: 20Hz-20kHz Signal/Noise Ratio: >90dB Dimensions: 2.5" x 4.6" x 4.4" (without antenna) Weight: 1.3 lbs. (including bumpers and antenna)

Read more less

When used in conjunction with the DW 20T Wireless Transmitter, the AIR LINK DW 20R Wireless Stereo Receiver brings the convenience of high-performance audio-streaming to any installed or portable sound system, making it ideal for hospitality and event spaces, as well as retail, home audio, and much more. Featuring a maximum wireless range of 100 feet (30 m), DW 20R is easy to use and utilises premium-grade Neutrik balanced XLR and unbalanced 1/4" TRS connectors to cover a wide range of audio applications. FEATURES Stereo receiver to wirelessly stream audio (together with separate DW 20T) Perfect for hospitality and event spaces, retail and home audio, etc. Apply multiple DW 20R units for larger coverage Digital 2.4 GHz wireless connectivity offers superior sound quality High headroom design offers superior sound quality Maximum wireless range 100 feet (30 m) External, articulating antenna ensures optimum transmission and reception Aluminium extrusion casing with protective rubber corners Floor and wall mount brackets for fixed installation (included) High quality Neutrik* XLR and 1/4" TRS connectors 2.4 GHz ISM band operation allows license-free use on a worldwide basis Compact and rugged design 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Configuration: Receiver Analog/Digital: Digital Number of Receivers: 1 Receiver Frequency Range: 2.4 GHz Range: 100 ft. Line-of-sight Antenna Type: Detachable Receiver Type: Table Top, Floor/Wall mount Front Panel Display: No Frequency Response: 20Hz-20kHz Signal/Noise Ratio: >90dB Outputs: 2 x XLR (balanced), 2 x 1/4" (unbalanced) Power Source: 12V DC power supply Height: 8.3" (including antenna) Width: 4.6" Depth: 5" Weight: 1.3 lbs.

Read more less

Building on Klark Teknik’s storied legacy of highest-quality signal processing devices, the DS 50 Pro Splitter 5 offers the same high headroom, dynamic response and sonic clarity you have come to expect. DS 50 is ideal for routing balanced XLR signals to as many as 5 discrete destinations, including FOH and monitor consoles, active monitor loudspeakers, broadcast mixers, and more. A passive device, the DS 50 does not require any form of external power, making it the perfect solution for a wide range of professional audio and multimedia applications. FEATURES Line level splitter sends single input signal to 5 outputs High headroom design offers superior sound quality Passive design does not require any power supply High quality Neutrik XLR connectors Ultra-low noise and ultra-linear system for highest signal integrity Aluminium extrusion casing with protective rubber corners Compact and rugged design

Read more less

The DN200 has become an established favorite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN200 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN200 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 K? load. This increased headroom means that much higher-level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN200 offers a very wide dynamic range, and only requires the -20 dB pad when connecting directly to instrument amplifier outputs or other very high-level signal sources. DN200 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is protected by tough silicone rubber corners FEATURES 2-Channel Active DI box with high-headroom design and +48 V phantom power for extended dynamic range Sum and split options for flexible signal routing Fully transformer-isolated design ensures electrical separation between PA and stage equipment Balanced line inputs on Neutrik Combo* XLR and high impedance 1/4" TRS connectors Stereo input on 1/8" TRS for connection of consumer audio equipment Independent phantom powering for each channel for maximum reliability Global 20 dB input pad and earth lift switches Aluminium extrusion casing with protective rubber corners Compact and rugged design SPECIFICATIONS Type: Active Channels: 1 Pads: -20dB Ground Lift: Yes Inputs: 2 x XLR Outputs: 2 x XLR Other I/O: 2 x 1/4" (link thru) Power Source: 48V Phantom Power Height: 2.5" Depth: 4.7" Width: 5.6" Weight: 1.43 lbs.

Read more less

When needing a solid splitter to send your balanced signal to multiple destinations, turn to the Klark Teknik DS 20 for an affordable, high-quality option. Equipped with a single input and two outputs, the DS 20 sends your sound to boards, speakers, and more without any tonal compromises. Utilizing a custom-made transformer designed by legendary sonic superheroes Midas, the DS 20 maintains your signal's integrity with results that belie its wallet-friendly price tag. Plus, its sky-high headroom pumps out fantastic sound at all levels. Everything is packed nicely in a road-ready aluminum casing with rubber corners, and the onboard Earth Lift (a.k.a. Ground Lift) switch ensures fantastic operation wherever you are. Purchase your Klark Teknik DS 20 from Music Bliss for dependability and professional quality you can rely on performance after performance. FEATURES Single input with 2 outputs to send your signal to multiple destinations Custom Midas-designed transformer retains your signal quality with impressive results High headroom produces excellent sound at all levels Earth Lift switch eliminates ground loop problems Durable aluminum case with rubber corners

Read more less

The DN32-WSG expansion card allows M32 and X32 users to mix, record and play back multichannel audio with a plethora of plugins hosted on Waves SoundGrid servers in extremely low latency. Waves offers highest-fidelity audio plugins for basically every contemporary and vintage-emulated audio processing. DN32-WSG now allows you to use the very same industry-standard processing tool chain for live productions that you may use in your studio environment already. FEATURES WAVES SoundGrid network interface for Behringer X32 and Midas M32 mixing consoles Mix, record and play back with SoundGrid-plugins in extremely low latency 32 input and output channels of audio over IP networks 44.1 and 48 kHz sample rates, 24-Bit resolution Clock Sync-over-Ethernet (SoE) for digital splits and distributed audio processing Redundancy and recovery options in networked audio Connects your console to the plugin processing power of WAVES SoundGrid servers Compatible with standard computers and network switches TRACKS LIVE application for intuitive multitrack recording and playback - download from waves.com SoundGrid Studio Application for ASIO*/Core Audio recording and playback - download from waves.com

Read more less

The Klark Teknik DN32-USB is a 32 x 32-channel USB audio interface card that instantly expands your Midas M32 or Behringer X32 mixer’s recording and playback capabilities. With the DN32-USB installed in your console’s expansion slot, you can effortlessly multitrack and play back up to 32 channels of high-quality 24-Bit, 48 kHz audio directly to your Mac* or Windows* computer, perform “virtual sound checks”, and remotely control your DAW software – all from the comfort of your favorite chair. Thanks to its low-latency 32-channel, bidirectional audio I/O via USB 2.0 and USB-MIDI capability, the DN32-USB allows you to easily manage and record large studio sessions or run live performances with outboard processing. With six available configurations to choose from, you can route either all or just a subset of your channels through your computer’s processor, which allows the use of your favorite DAW studio plugins for live sound production. FEATURES USB 2.0 expansion module for Midas and Behringer digital consoles Up to 32 bidirectional channels @ 48 kHz of recording and playback Simultaneous computer audio recording and playback Operates from console USB device clock Enables remote control of compatible DAW software via emulations of Mackie Control* and HUI* protocols Seamless computer integration for virtual sound checks and software plug-ins Ultra-low latency ASIO* drivers available for Windows Class-compliant USB design compatible with Mac OS X CoreAudio* - no driver required

Read more less

The DN100 has become an established favourite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN100 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN100 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 k? load. This increased headroom means that much higher level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN100 offers a very wide dynamic range, and only requires a single -30 dB pad for use when connecting directly to instrument amplifier outputs.DN100 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is covered by a tough silicone rubber sleeve. FEATURES Active DI box with high-headroom design and +48 V phantom power for extended dynamic range Fully transformer-isolated design ensures electrical separation between PA and stage equipment Balanced line input on Neutrik* XLR and high impedance input and link output on 1/4" TRS connectors 20 dB input pad and earth lift switches Aluminium extrusion casing with protective rubber corners Compact and rugged design SPECIFICATIONS Type: Active Channels: 1 Pads: -20dB Ground Lift: Yes Inputs: 1 x 1/4", 1 x XLR Outputs: 1 x XLR Other I/O: 1 x 1/4" (link thru) Power Source: 48V Phantom Power Height: 2.5" Depth: 4.4" Width: 4.7" Weight: 0.97 lbs.

Read more less

The DN32-LIVE SD/SDHC and USB 2.0 Expansion Module for MIDAS M32 and BEHRINGER X32 mixers provides 32-channel bi-directional audio I/O via USB 2.0 for both live performance and studio recording, plus comprehensive remote operation of your DAW via HUI/Mackie Control emulation. The addition of dual SD/SDHC slots allows fully independent recording and playback of up to 32 channels of uncompressed WAV files in consistent sessions – up to the maximum capacity of the SD cards. Now, without the need for a laptop computer, you can capture multi-channel live or session tracks, perform virtual sound checks, add in backing-tracks, set and manipulate accurate markers, and enjoy full remote operation via PC, Android* or iPad* apps, and X-TOUCH control surfaces. All of this barely begins to scratch the surface of what DN32-LIVE can bring to your M32/X32 console. FEATURES USB 2.0 expansion module for Midas and Behringer digital consoles 32-channel live recording and playback on dual SD/SDHC cards Up to 3 hours of 48 kHz/32-bit PCM recording of 32 channels in one session, stored as uncompressed WAV files Up to 32 bidirectional channels @ 48 kHz of recording and playback Independent operation of SD cards and USB recording / playback Remote control via PC, Android* or iPad* apps, assignable controls or compatible hardware control surfaces, such as the Behringer X-TOUCH Dual SD card slots to keep virtual sound check and live performance files separately available or for extended recording time Sample-accurate automatic spanning feature allows extending a session across both SD cards for more than 12 hours of 8-track recording time non-stop Instantaneous live playback with preload and markers in the console UI and remote apps Markers can be set on the fly for identifying song positions while recording or playing back All markers can be edited directly in the console GUI Seamless computer integration for virtual sound checks and software plug-ins Channel routing can be stored and automated for record/playback Secure file handling in the event of power blackout (optional CR123A Lithium cell required) Enables remote control of compatible DAW software via emulations of Mackie Control* and HUI* protocols Compatible with CoreAudio on Mac OSX* - ultra-low latency ASIO* drivers for Windows* PC available SPECIFICATIONS Type: Console Expansion Module Compatibility: Behringer X32, Midas M32 Number of Channels: 32 (44.1kHz, 48kHz) USB: 1 x Type B 2.0 Data I/O: 2 x SD/SDHC Card Slots

Read more less

MADI devices are widely used in a broad range of pro audio applications including permanent installation, touring sound, live/studio recording, and broadcasting. The DN32-MADI expansion card enables your Midas M32 or Behringer X32 digital console to exchange 24-bit multichannel audio streams at 44.1 or 48 kHz with any other MADI compatible devices. Protocols supported by the DN32-MADI include AES10-1991 with up to 56 x 56 channels, and AES10-2003 with up to 64 x 64 channels. DN32-MADI features optical duplex SC-plugs (IEC874-19) to connect with MADI devices using multimode optical-fibre cable. Klark Teknik has tested multimode cable connections of 500 metres in length successfully, and distances of up to 2 km may be possible. FEATURES MADI (AES10-compliant) expansion module for Midas and Behringer digital consoles Up to 32 bidirectional channels @ 48 kHz sample rate Operates up to 500 m over optical fibre link and 100 m over coaxial copper link Optical transmission on SC-Duplex* connector Copper transmission on 75 ohm coaxial BNC connectors Dual-redundant operation with failover from optical to copper connections Operates as either MADI clock master or MADI clock slave Selection of 32 input and output channels (1-32, 33-64) from 64 MADI channels

Read more less

The DN32-ADAT card allows you to seamlessly integrate your Midas M32 or Behringer X32 digital mixing console with any ADAT I/O compatible device. This includes stand-alone recorders, digital audio workstations, or other similarly equipped digital mixers and signal processors. Capable of providing up to 32 channels of ADAT I/O via 4 pairs of optical-fibre Toslink* connectors arranged in groups of 8 channels, the DN32-ADAT features 24-bit signal transmission and your choice of a 44.1 or 48 kHz sample rate. The optical-fibre, light-pipe connections provide absolute galvanic isolation, which completely eliminates ground loop interference – for unparalleled signal integrity. FEATURES ADAT* expansion module for Midas and Behringer digital consoles Up to 32 channels of simultaneous recording and playback @ 48 kHz Features 4 input and 4 output TOSLINK* optical fibre connectors BNC word clock input or output for external clock synchronisation Ideal for studio and live recordings with ADAT-equipped HD recorders Optical fibre connections eliminate ground loop interference

Read more less

The DN32-DANTE expansion card provides up to 32 channels of bidirectional, networked audio to your Midas M32 or Behringer X32 mixing console for seamless integration with Dante enabled IP networks. Based on information technology standards, Dante provides uncompressed, multichannel digital media networking, with low latency and synchronisation. By focusing on flexible interoperability on an existing IP network infrastructure, Dante has been widely accepted and adopted by many pro audio manufacturers. FEATURES Audinate Dante* expansion module for Midas and Behringer digital consoles Up to 32 bidirectional channels @ 48 kHz Enables multichannel recording and playback via Dante Virtual Soundcard* (PC or Mac* computer) Primary and secondary Ethernet interfaces for dual-redundant Dante networking Operates from internal Dante network Precision Time Protocol (PTP) clock Optional Dante Controller software for remote configuration (PC or Mac* computer) LED indicators monitor network activity and speed

Read more less

The Klark Teknik DN 30T Dante Audio Transmitter is a simple and convenient way for connecting any mic/instrument or line level source to a Dante network. It’s compact size as well as the flexibility of its features and mounting options make it the perfect networking solution for hospitality and event spaces, performance and installed audio and so much more. The DN 30T can be connected to any Dante receiver via a standard CAT5e or CAT6 cable. This same connection can be used to power the device through Power over Ethernet or via a 24-volt DC input. FEATURES 2-Channel audio transmitter for connecting mic/instrument and line level sources to Dante*-networks Automatically reconnects with any configured Dante receiver such as Klark Teknik DN 30R Plug'n'play experience in networked audio Perfect for hospitality and event spaces, performance and installed audio, etc. 96 kHz A/D conversion and high headroom design offers superior sound quality Aluminium extrusion casing with protective rubber corners Floor and wall mount brackets for fixed installation (included) Quality connectors for reliability Compact and rugged design 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Type: Dante Ethernet Converter A/D Resolution: Up to 24-bit/96kHz Analog Inputs: 1 x Dual RCA Stereo, 2 x 1/4" (line), 1 x 1/8" (line) Data I/O: 1 x Locking Ethernet (Dante) Height: 2.1" Width: 4.3" Depth: 4.1" Weight: 1.5 lbs.

Read more less

The Klark Teknik DN 30R Dante Audio Receiver is a simple and convenient way for connecting active loudspeakers, amplifiers or mixers to a Dante network. It’s compact size as well as the flexibility of its features and mounting options make it the perfect networking solution for hospitality and event spaces, performance and installed audio and so much more. The DN 30R can receive signals from any Dante transmitter via a standard CAT5e or CAT6 cable. This same connection can be used to power the device through Power over Ethernet or via a 24-volt DC input. FEATURES 2-Channel audio receiver for connecting active loudspeakers, amplifiers or mixers to Dante*-networks Automatically reconnects with any configured Dante transmitter such as Klark Teknik DN 30T Plug'n'play experience in networked audio Perfect for hospitality and event spaces, performance and installed audio, etc. 96 kHz D/A conversion and high headroom design offers superior sound quality Built-in headphone amplifier for local monitoring Aluminium extrusion casing with protective rubber corners Floor and wall mount brackets for fixed installation (included) Quality Neutrik* XLR connectors for highest reliability Compact and rugged design 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Configuration: 2-channel Receiver Analog/Digital: Analog Number of Receivers: 1 Receiver Type: Table Top Displays: LED Frequency Response: 20Hz-20kHz Signal/Noise Ratio: 98dB Dynamic Range: 116dB Outputs: 2 x XLR Data I/O: 1 x RJ45 Power Source: 24V DC power supply (included) Height: 2.5" (with bumpers) Width: 4.6" (with bumpers) Depth: 4.4" (with bumpers) Weight: 1.5 lbs.

Read more less

Building on KLARK TEKNIK’s storied legacy of highest-quality direct injection devices, the DI 22P PRO DI AV 2 offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 22P combines many of the outstanding features of the DI 20P and DI 10P direct boxes into one powerful tool that should be in every audio engineers kit. The extremely versatile DI 22P accepts dual instrument, line and speaker levels, plus also accommodates MP3, CD players, keyboard or drum submixers, and a variety of other stereo sources, and faithfully reproduces the character of electric and acoustic instruments, allowing far more of the detail of musical performances to be captured. A passive device, the DI 22P does not require any form of external power to complete its mission. Equipped with custom-built MIDAS transformers and switchable input Pads, the DI 22P is the perfect choice for premium-grade professional audio and multimedia applications. FEATURES Passive Stereo DI Box for general purpose and multimedia applications Custom-built Midas transformers for highest signal integrity High headroom design offers superior sound quality Passive design does not require any power supply Stereo input on 1/4", 1/8" TRS and RCA connectors Switchable input attenuation for guitar, line and speaker levels High quality Neutrik* XLR connectors Earth Lift switches for input and output eliminate ground loop problems Fully transformer-isolated design ensures electrical separation Ultra-low noise and ultra-linear system for highest signal integrity Aluminium extrusion casing with protective rubber corners Compact and rugged design 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Connectors : 2 x ¼" TS, 1/8" TRS, RCA unbalanced Impedance : 30 k? Max. input level : 30 dBu @ 1 kHz Connectors : 2 x XLR, balanced Impedance : 600 ? Max. output level : 8.5 dBu @ 1 kHz Frequency response : 20 Hz to 30 kHz (± 1 dB) THD + N (distortion) : 0.01% @ 1 kHz, 0 dBU Signal-to-noise ratio : 105 dBu Input pad : -15 dB Power requirement : Passive

Read more less

Building on KLARK TEKNIK’s storied legacy of highest-quality direct injection devices, the DI 20P PRO DI 2 offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 20P is ideal for interfacing stereo keyboards, samplers and other electronic musical instruments to mixing consoles, and faithfully reproduces the character of electric and acoustic instruments, allowing far more of the detail of musical performances to be captured. A passive device, the DI 20P does not require any form of external power to complete its mission. Equipped with a custom-built MIDAS transformer and switchable input Pad, DI 20P easily accommodates instruments, line, and even loudspeaker level signals – making it the perfect choice for professional audio and multimedia applications. FEATURES Passive stereo DI Box for general purpose applications Custom-built Midas transformer for highest signal integrity High headroom design offers superior sound quality Passive design does not require any power supply Stereo inputs on 1/4" TS connectors Through connectors on 1/4" TS connectors Switchable input attenuation for guitar, line and speaker levels High quality Neutrik* XLR connectors Earth Lift switch eliminates ground loop problems Fully transformer-isolated design ensures electrical separation Ultra-low noise and ultra-linear system for highest signal integrity Aluminium extrusion casing with protective rubber corners Compact and rugged design 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Connectors : 2 x ¼" TS unbalanced Impedance : 10 k?/PAD , 500 k?/off Max. input level : 30 dBu @ 1 kHz Connector : 2 x XLR, balanced Impedance : 150 ?, 1 kHz Max. output level : 8.5 dBu @ 1 kHz Frequency response : 20 Hz to 30 kHz (± 1 dB) THD + N (distortion) : 0.01% @ 1 kHz, 0 dBu Signal-to-noise ratio : 108 dBu Input pad : -15 dB Power requirement : Passive

Read more less

Building on KLARK TEKNIK’s storied legacy of highest-quality direct injection devices, the DI 10P PRO DI offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 10P is ideal for interfacing MP3, CD players, keyboard or drum submixers, and a variety of other stereo sources to mixing consoles. A passive device, the DI 10P does not require any form of external power to complete its mission. Equipped with a custom-built MIDAS transformer, fully adjustable independent level controls for the stereo input channels, DI 10P is the perfect stereo to mono XLR solution for professional audio and multimedia applications. FEATURES Passive DI Box with stereo input and summed mono output Custom-built Midas transformer for highest signal integrity High headroom design offers superior sound quality Passive design does not require any power supply Stereo input on 1/8" TRS and RCA connectors Fully adjustable level control for both channels High quality Neutrik* XLR connector Earth Lift switch eliminates ground loop problems Fully transformer-isolated design ensures electrical separation Ultra-low noise and ultra-linear system for highest signal integrity Aluminium extrusion casing with protective rubber corners Compact and rugged design 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Type: Passive Direct Box Channels: 1 Ground Lift: Yes Inputs: 1 x Dual RCA Stereo, 1 x 1/8" Outputs: 1 x XLR Height: 2.5" Width: 4.7" Depth: 4.4" Weight: 1.0 lbs.

Read more less

Building on KLARK TEKNIK’s storied legacy of highest-quality direct injection devices, the DI 10A PRO DI ACTIVE offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 10A is ideal for interfacing keyboards, samplers and other electronic musical instruments to mixing consoles, and faithfully reproduces the character of electric and acoustic instruments, allowing far more of the detail of musical performances to be captured. The DI 10A is powered by +48 V phantom power with a 9 V battery backup, which automatically allows the device to function should phantom power fail, or be unavailable. Equipped with a switchable input attenuator, DI 10A easily accommodates instruments, line, and even loudspeaker level signals – and thanks to its extremely low noise input circuit topology (-112 dBu), DI 10A provides extended dynamic range, making it the perfect choice for professional audio and multimedia applications. FEATURES Active DI Box for general purpose and multimedia applications Custom-built Midas transformer for highest signal integrity High headroom design offers superior sound quality Powered from console +48 V phantom or internal battery (not included) Automatic switchover to battery if phantom power fails Matches the level and impedance with unity gain without loading the source Switchable input attenuation for guitar, line and speaker levels High quality Neutrik* XLR and high impedance 1/4" TRS connectors Earth Lift switch eliminates ground loop problems Fully transformer-isolated design ensures electrical separation Ultra-low noise and ultra-linear system for highest signal integrity Aluminium extrusion casing with protective rubber corners Compact and rugged design 10-Year Warranty Program* Designed and engineered in the U.K.

Read more less

Whenever you need more headroom for any microphone in your podcast setup, recording studio or live rig, the MIC BOOSTER CT 1 is exactly the tool you need to get a crisp and clean microphone signal in a robust, compact and simple to use package. The CT 1 can work with almost any dynamic or passive ribbon microphone. Its high-quality preamp adds an incredible +25dB of gain to your mic pre’s which increases the headroom and allows you to dial in the perfect mic level at a much lower gain setting at the mixer thus leading to a cleaner sound. FEATURES Dynamic mic booster adds extra gain to your sound High-quality preamp provides up to +25 dB of gain Phantom powered with no need for external power supply Works with almost any dynamic or passive ribbon microphone Rugged, road-worthy construction for years of dependable use 3-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Type: In-line Mic Booster Channels: 1 Inputs: 1 x XLR Outputs: 1 x XLR Power Supply: 48V Phantom Power Height: 3.1" Width: 1.0" Depth: 0.9" Weight: 0.22 lbs.

Read more less

Just as the old adage says, “You can't judge a book by its cover”, the true beauty of the DF1000 lies hidden beneath its elegant aesthetic design and user-friendly interface. Inside beats the heart of a truly-professional, dual-channel, automatic feedback-suppression processor, brought to life by one of the world’s leading manufacturers of high-end signal processor electronics. DF1000’s ultrafast and highly-accurate feedback detection algorithms instantly find critical frequencies and apply up to 32 filters per channel to eliminate feedback. Whether your application calls for feedback protection for the spoken word, musical performances, or both – the DF1000 is the ideal solution. From conference rooms, to concert halls, to house of worship applications, any venue with a live sound system will benefit from the DF1000’s unprecedented performance and value. FEATURES Dual-channel feedback suppression processor designed for fully automatic and zero-configuration setup Offers up to 10 dB increase in system gain Instantly detects and stops acoustic feedback. Highly effective with both speech and music Ultra-fast and highly accurate DSP selects and applies up to 32 filters per channel Two fully independent audio channels to process stereo or separate zone signals Extremely narrow filters (up to 1/30th octave) to retain overall signal integrity Front panel control featuring suppression and filter reset buttons Two balanced/unbalanced inputs on combination line level XLR/TRS and 3-pin Euroblock connectors Auto-ranging universal switch-mode power supply 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Connections : 2 x XLR / TRS combo | 2 x 3-pin Euroblock Input impedance : appr. 20 k? Normal input level : +4 dBu Max. input level : +21 dBu Connections : 2 x XLR | 2 x 3-pin Euroblock Output impedance : appr. 50 ? Normal output level : +4 dBu Max. output level : +21 dBu Controls : Power on / off | Suppression (momentary) | Filter reset (momentary) Indicators : Power | Active | Reset Frequency response : 20 Hz to 20 kHz,+0/-0.5 dB Dynamic range : 104 dB THD+N : < 0.01 % @ 20 Hz to 20 kHz, +4 dBu In Crosstalk : < -81 dB S/N ratio : >88 dB @ +4 dBu In CMRR : >45 dB Processor system gain : 0 dB Additional acoustic gain : 10 dB Converters : 24-bit Sample rate : 48 kHz Type : Auto-switching power supply Mains voltage (all regions) : 100 – 240 VAC, 50/60 Hz Fuse : T 1.25 A H 250 V Power consumption : 10 W Mains connector : Standard IEC receptacle

Read more less

Whenever you need more headroom for any microphone in your podcast, recording studio or stage setup, the MIC BOOSTER CM-1 is exactly the tool you need to get a crisp and clean microphone signal in a robust and simple to use package. The CM-1 can work with almost any dynamic or passive ribbon microphone. Its high-quality preamp adds an incredible +25dB of gain to your mic pre’s which increases headroom and allows you to dial in the perfect mic level at a much lower gain setting at the mixer thus leading to a cleaner sound. FEATURES Dynamic mic booster adds extra gain to your sound High-quality preamp provides up to +25 dB of gain Phantom powered with no need for external power supply Works with almost any dynamic or passive ribbon microphone Rugged, road-worthy construction for years of dependable use SPECIFICATIONS Type: In-line Mic Booster Channels: 1 Inputs: 1 x XLR Outputs: 1 x XLR Power Supply: 48V phantom power Height: 1.5" Width: 1.5" Depth: 3.3" Weight: 0.55 lbs.

Read more less

Designed as an homage to the classic 1176LN, every effort was made to keep the 76-KT FET-Style Compressor true to the original D and E versions of the iconic signal processor. At the same time, we modernised the completely discrete signal path using hand-selected components and custom-engineered MIDAS input and output transformers – for the ultimate in pristine sonic performance. FEATURES Classic FET-style compressor modeled after iconic 1176LN*, D and E Revisions Completely discrete signal path Class-A line-level output amplifier Custom-built, Midas input and output transformers Push button selection of compression ratios: 4:1, 8:1, 12:1, 20:1 Ultra-fast attack time: 20 to 800 microseconds Adjustable release time: 80 to 700 milliseconds Vintage-style meter features gain reduction and output Transformer balanced inputs and outputs on Neutrik* XLR connectors Rugged 2U rackmount chassis for durability in portable applications Auto-ranging universal switch-mode power supply 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Type: FET Class A Compressor Number of Channels: Single channel Controls: Attack, Release Ratio: 20:1, 12:1, 8:1, 4:1 Inputs: 1 x XLR, 1 x 1/4" TRS Outputs: 1 x XLR, 1 x 1/4" TRS Rack Spaces: 2U Power Source: Standard IEC AC cable Height: 3.46" Depth: 6.25" Weight: 6.2 lbs.

Read more less

The chorus effect has been a studio mainstay since the ‘80s. With greats such as Brian Eno, Stevie Ray Vaughan, Peter Gabriel and so many more incorporating this effect into their recordings, the chorus has become legendary effect in the music industry. Now, that legend continues with the 3RD DIMENSION BBD-320, an amazingly affordable analog multi-dimensional signal processor that can recreate those classic tones that so many amazing artists have used in countless releases. FEATURES Legendary analog Spatial Sound Processor used by world famous artists Authentic reproduction of original analog circuitry Pure analog signal path based for highest signal integrity Amazing sound effects based on authentic BBD (Bucket Brigade Delay) technology Precise 10-segment LED meter for output level Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors Relay-controlled hard bypass switch with remote control and auto bypass function Rugged 2U rackmount chassis for durability in portable applications SPECIFICATIONS Processor Type: Analog Multi-dimension Chorus Number of Channels: Stereo/Mono Effects Types: Bucket Bridge Delay based Chorus, 4 x Dimension Modes Analog Inputs: 2 x XLR, 2 x 1/4" TRS Analog Outputs: 2 x XLR, 2 x 1/4" TRS Other I/O: 1 x 1/4" TS (remote switch) Power Source: Standard IEC AC cable Rack Spaces: 2U Height: 3.5" Width: 19" Depth: 6.2" Weight: 5.5 lbs.

Read more less

Whenever you need more headroom for any microphone in your podcast, recording studio or stage setup, the MIC BOOSTER CM-2 is exactly the tool you need to get a crisp and clean microphone signal in a robust and simple to use package. Both channels of the CM-2 can work with almost any dynamic or passive ribbon microphone. Its high-quality preamp adds an incredible +25dB of gain to your mic pre’s which increases headroom and allows you to dial in the perfect mic level at a much lower gain setting at the mixer thus leading to a cleaner sound. FEATURES 2-channel dynamic mic booster adds extra gain to your sound High-quality preamps provide up to +25 dB of gain Phantom powered with no need for external power supply Works with almost any dynamic or passive ribbon microphone Rugged, road-worthy construction for years of dependable use 3-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Type: 2-channel In-line Mic Booster Channels: 2 Inputs: 2 x XLR Outputs: 2 x XLR Power Supply: 48V phantom power Height: 1.5" Width: 2.6" Depth: 3.3" Weight: 0.81 lbs.

Read more less

If ever there is an official “Audio Technology Hall of Fame”, it will definitely include a shrine to the iconic Teletronix LA-2A*. We pay homage to this audio-processing pioneer that has graced so many recordings, with our 2A-KT Classic Leveling Amplifier. And while vintage Teletronix LA-2As are extremely rare and expensive, the 2A-KT is amazingly affordable – and designed for the 21st Century. Mastering quality compression and limiting, at a price point that makes the 2A-KT equally at home in your studio – and your live rack! FEATURES Classic tube compressor/leveling amplifier modeled after the iconic Teletronix LA-2A* Completely discrete signal path Premium selection 12AX7, 12BH7 and EL84 tubes Lag-free optical attenuator based on original electroluminescent technology Custom-built Midas input and output transformers Frequency Response: 10 Hz to 20 kHz, +/- 1 dB Gain Limiting: 0 to 30 dB Ultra-fast attack time: 10 milliseconds Release time: 50 milliseconds to 5 seconds Adjustable stereo-link connection Variable pre-emphasis for digital audio recording and broadcasting transmission Vintage-style meter features gain reduction and output Transformer balanced inputs and outputs on Neutrik* XLR connectors Rugged 2U rackmount chassis for durability in portable applications Auto-ranging universal switch-mode power supply 10-Year Warranty Program* Designed and engineered in the U.K. SPECIFICATIONS Type: Tube/Optical Number of Channels: 1 Controls: Limit/Compress, Output Gain, Peak Reduction, Gain Reduction Frequency Response: 10Hz-20kHz Inputs: 1 x XLR, 1 x 1/4" Outputs: 1 x XLR, 1 x 1/4" Other I/O: 1 x 1/4" (stereo linking) Tubes: 2 x 12AX7, 1 x 12BH7, 1 x EL84 Rack Spaces: 2U Power Source: Standard IEC AC connector Height: 3.5" Depth: 6.2" Width: 19" Weight: 6.4 lbs.

Read more less