The British-built 100 Watt JVM210H head offers a more straightforward two channel preamp (Clean/Crunch and Overdrive) than the JVM410H four channels, for guitarists who prefer a more stripped down ?fewer frills? approach. The two independent channels both have three modes. Each mode reconfigures the gain structure of each channel, making six modes in total that can take you from ?Plexi?/JTM45 cleans through JCM800 punch to modern high-gain tones. The JVM210H is equipped with the same groundbreaking technology as its big brother, the JVM410H. Featuring two studio quality Reverbs (one per channel), with individual channel EQ, two Master Volumes, and a memory that will recall your Reverb, FX Loop and Master settings. SPECIFICATIONS Model: JVM210H Type: Tube

Read more less

 The famed Marshall 1962 Bluesbreaker got its name from the days of Eric Clapton, whom used it with the John Mayall's Bluesbreakers.  It has a unique clean sustain with the right amount of sweet compression. Comes well equipped with tremolo channel and stays true to its vintage heritage. SPECIFICATIONS Accessories: Footswitch, Power Cable Impedance: 16ohm Effects: Tremolo EQ: Presence, Bass, Middle, Treble, Volume 1, Volume 2, Speed, Intensity Inputs: 2 x 2 Model: 1962 " BLUESBREAKER" No. of Channels: 2 Speaker: 2 x 12" Celestion T1221 Greenback Total Power: 30W Tube: 2 x ECC83, 1 x ECC83, 2 x 5881, 1 x GZ34

Read more less

 This 50w reissue plexi has been lovingly crafted to replicate the 70’s tone and aesthetics of the original. Its unique tonal characteristics are what defined this all-valve amp and they have not changed in this reissue. The 1987XTM delivers the perfect balance of classic Marshall overdrive and glistening clean tones. An additional FX loop gives a modern twist to the amp. SPECIFICATIONS Technology: Valve Channels: 2 (Split), non-master volume Output wattage: 50w Outputs: 2 x 1/4" jack speaker outputs, selectable 16?/ 8? / 4? load Inputs: 4 (2 x high, 2 x low) "Lead and Bass" Controls: Presence, bass, middle, treble, high treble/loudness I, normal/loudness II Effects loop: Yes, Send/Return Preamp valves: 2 x ECC83, 1 x ECC83 (phase splitter) Power amp valves: 2 x EL34 Accessories: Detachable power cable included, speaker cable included Weight: 15.3 kg / 34 lbs Dimensions (Width X Height X Depth): 660 mm X 260 mm X 205 mm / 26" X 10.2" X 8.1"

Read more less

 Marshall 1959HW 100W Handwired Tube Guitar Amplifier Head The 1959HW is a line right back to the celebrated era of the mid to late 1960s, the original was born when Pete Townshend asked Jim Marshall if he could make it louder. This re-issue delivers that classic Marshall tone with the same overdrive and crunch, using the authentic parts and methods to construct. The louder you play, the better it sounds. SPECIFICATIONS Technology:    Valve Channels:    2 (Split) "Lead and Bass", non-master volume Output wattage:    100w Outputs:    2 x 1/4" jack speaker outputs, selectable 16ohm / 8ohm / 4ohm load Inputs:    4 (2 x high & 2 x low inputs) Controls:    Volume I, volume II, treble, middle, bass, presence Preamp valves:    2 x ECC83, 1 x ECC83 (phase splitter) Power amp valves:    4 x EL34 Accessories:    Detachable power cable supplied Weight:    21.4 kg / 47 lbs Dimensions (Width X Height X Depth):    740 mm X 305 mm X 210 mm / 29.1" X 12" X 8.3"

Read more less

 The JCM25/50 Silver Jubilee Series was produced in 1987 to celebrate 25 years of Marshall Amplification and 50 years of Jim Marshall being in the music business. Inspired by this acclaimed series the 20 Watt Mini Jubilee combo and 'small box' head combine classic Silver Jubilee preamp tone, features and styling in a lower power, 'mini' design. This contemporary 'mini' take on the Jubilee Series features an ECC83 & EL34 valve-set, High/Low output switching, (20 Watt to 5 Watt), FX Loop and independent 4/8/16 Ohm speaker outputs. The 2525C combo is loaded with a single 12_ Celestion G12M Greenback speaker. In keeping with classic Jubilee tone, Mini Jubilee features preamp circuitry taken from the 2555X which was launched in 2015 and made using the original diagrams. The amp also features classic silver vinyl and chrome plated panelling to complete the Jubilee look. The 2525 Mini Jubilee is expertly crafted and is designed, engineered and constructed to the highest possible standards at the Marshall factory in Bletchley, England. 

Read more less

 The JCM25/50 Silver Jubilee Series was produced in 1987 to celebrate 25 years of Marshall Amplification and 50 years of Jim Marshall being in the music business. Inspired by this acclaimed series the 20 Watt Mini Jubilee combo and small box head combine classic Silver Jubilee preamp tone, features and styling in a lower power, 'mini' design. This contemporary 'mini' take on the Jubilee Series features: an ECC83 & EL34 valve-set, High/Low output switching, (20 Watt to 5 Watt), FX Loop and independent 4/8/16 Ohm speaker outputs. In keeping with classic Jubilee tone, Mini Jubilee features preamp circuitry taken from the 2555X which was launched in 2015 and made using the original diagrams. The amp also features classic silver vinyl and chrome plated panelling to complete the Jubilee look. The 2525 Mini Jubilee is expertly crafted and is designed, engineered and constructed to the highest possible standards at the Marshall factory in Bletchley, England. 

Read more less

 1973x, another faithful British-made recreation of the 1973 2-channel 2x12" tube combo amp. The design is straightforward but packed with incredible tone; rich overtones and responsive to playing nuances.  Ideal for both studio and live sound, staying true to the Marshall tone heritage. SPECIFICATIONS Accessories:    Footswitch, Power Cable Impedance:    15 Ohm Effects:    Tremolo EQ:    Tone & Vol x2, Speed, Intensity Inputs:    2x2 Model:    1973X No. of Channels:    2 Speaker:    2 x 12" Celestion G12M-20 Total Power:    18w Tube:    2 x ECC83, 1 x ECC83, 2 x EL84, 1 x EZ81 Type:    Tube 

Read more less

 The Silver Jubilee Series was created in 1987 to celebrate the 25th anniversary of the founding of Marshall Amplification and the 50th year of Jim Marshall being in the music business, hence the Silver Jubilee's original '25/50' designation. The limited edition all-valve Silver Jubilee amplifiers looked stunning in silver vinyl covering with chrome-plated control panel.  Based on JCM800 2203 and 2204 Master Volume models, the Jubilee amplifiers were the first Marshall products with Pentode/Triode switching, which halves power output. The Jubilee Series featured an innovative, if somewhat unusual, preamp circuit which had three gain 'modes': 'Clean', Rhythm Clip, and foot-switchable Lead Channel. SPECIFICATIONS Accessories: Footswitch, speaker and power cable EQ: In put Gain (Pull Rhythm Clip), Lead Master, Output Master, Treble, Middle, Bass, Presence, Pentode/Triode Switch Model: 2555X No. of Channels: 2 Outputs: FX Loop, DI Output Total Power: 100w Tube: 3 x ECC83, 4 x EL34 Type: Tube

Read more less

 A 2-way latching footswitch for DSL5, DSL20C, DSL20H, DSL40 and DSL100. The first switch will enable you to change between the ultra gain and classic gain channels.  The second switch is an FX loop bypass. There are built-in indicator lights that notify you when the switch is active or not.

Read more less

 The 1962HW is all hand-wired, British recreation of the iconic 30-watt amp, once famously used by Eric Clapton during his John Mayall days (hint the 'Bluesbreaker' nickname).  The sustain and clean in this amp is incredible with articulation and sweet compression. The only reissue closest to the original! SPECIFICATIONS Range    Handwired Technology    Valve Channels    2 (Multi) "Lead and Bass" non-master volume Output wattage    30w Outputs    2 x 1/4" jack speaker outputs, selectable 16? / 8? / 4? load Inputs    4 (2 x high & 2 x low inputs) Controls    Tremolo Speed, Tremolo Intensity, Presence, Bass, Middle, Treble, Volume I, Volume II Effects    Tremolo Effects loop    No Speaker configuration    2x12" Speaker model    Celestion G12-C (25W, 16?) Unit impedance    8? Preamp valves    3 x ECC83, 1 x ECC83 (phase splitter) Power amp valves    2 x KT66 Rectifier    1 x GZ34 Footswitch    PEDL-00056 included Cable    Detachable power cable included, Speaker cable included Dimensions    815 mm / 32.1" W X 625 mm / 24.6" H X 270 mm / 10.6" D Weight    33.4 kg / 74 lbs

Read more less

 A faithful recreation of the 1974 18-watt dual channel. It is thoroughly and meticulously hand soldered with classic English design, built in tube Tremolo circuit and interactive EQ controls.  The cleans are rich with articulation and sensitivity. The specially designed Celestion G12M-20 Greenback has been masterfully 'aged' to get that vintage vibe going. SPECIFICATIONS Accessories: Footswitch and Power cable Impedance: 15 Ohm Effects: Tremolo Effects Loop: No EQ: Tone & Vol x2, Speed, Intensity Inputs: 2 x 2 Model: 1974X No. of Channels: 2 Speaker: 1 x 12" Celestion G12M-20 Total Power: 18W Tube: 2 x ECC83, 1 x ECC83, 2 x EL84, 1 x EZ81 Type: Tube

Read more less

 Nothing produces that classic "British" sound like a Marshall amplifier, whether it's a combo or head and cab configuration. The Studio Vintage is based on the amp that first defined rock ‘n’ roll in the 60s, the famed 1959SLP.Combining the raw power and authentic voice of classic rock into a compact 20W amp, it stays faithful to the original with its Plexi design and all-valve tone.  The SV20H is an all valve handbuilt amp designed and built in the UK, to accurately recreate the classic Marshall tone. From saturated blues tones to biting leads for classic rock, you'll be hard pressed to tell it apart from a 1959SLP. It also has a handy power reduction circuit so you can drop from 20W to 5W and practice with cranked-up tones at low volume at home. SPECIFICATIONS Inputs:    4 (2 x high, 2 x low) "Lead and Bass" Output wattage:    20W (with power reduction option to 5W) Outputs:    5 x 1/4” jack sockets, selectable 16? / 8? / 4? load Controls:    Low/High power mode selection switch, presence, bass, middle, treble, high treble/loudness I, normal/loudness II Effects loop:    Yes, series, send/return Preamp valves:    2 x ECC83, 1 x ECC83 (phase splitter) Power amp valves:    2 x EL34 Accessories:    Detachable power and speaker cables included Dimensions:    500mm / 19.7" (W) X 240mm / 9.4" (H) X 230mm / 9.1" (D) Weight:    9.25kg / 20.4 lbs 

Read more less

 Prepare to craft and innovate in rehearsal to shape the ideal stage sound for you with the 100W JVM410H. There are four independent channels, two master volumes and digital reverb so you can transform your sound palette and generate revolutionary sound combinations.  The six-channel footswitch can store your favourite combinations and allows you to take your sound wherever you go, ready to perform with any JVM. SPECIFICATIONS  Technology    Valve Channels    4 (Multi) Output wattage    100W Outputs    Speaker outputs - 5 x 1/4" jack sockets (16? load / 8? load / 4? load), Emulated Line Out (XLR), MIDI Thru Inputs    1 x 1/4" jack instrument input, MIDI In, Footswitch Controls    Channel and mode select (button), gain (per channel), treble (per channel), middle (per channel), bass (per channel), volume (per channel), reverb (per channel), presence, resonance, master volume select, master volume (switchable for each channel) Effects    Digital reverb Effects loop    2, 1 x series parallel, 1 x series Preamp valves    4 x ECC83, 1 x ECC83 (phase splitter) Power amp valves    4 x EL34 Footswitch    PEDL-91005 included Cable    Detachable power cable included, speaker cable included Dimensions    740 mm / 29.1" W X 310 mm / 12.2" H X 215 mm / 8.5" D Weight    22 kg / 49 lbs

Read more less

 Nothing produces that classic "British" sound like a Marshall amplifier, whether it's a combo or head and cab configuration. The Studio Vintage is based on the amp that first defined rock ‘n’ roll in the 60s, the famed 1959SLP. Combining the raw power and authentic voice of classic rock into a compact 20W amp, it stays faithful to the original with its Plexi design and all-valve tone.  The SV20C is an all valve handbuilt amp designed and built in the UK, to accurately recreate the classic Marshall tone. From saturated blues tones to biting leads for classic rock, you'll be hard pressed to tell it apart from a 1959SLP. It also has a handy power reduction circuit so you can drop from 20W to 5W and practice with cranked-up tones at low volume at home. SPECIFICATIONS Inputs:    4 (2 x high, 2 x low) "Lead and Bass" Output wattage:    20W (with power reduction option to 5W) Outputs:    2 x 1/4" jack speaker, selectable 16? / 8? / 4? load Controls:    Low/High power mode selection switch, presence, bass, middle, treble, high treble/loudness I, normal/loudness II Effects loop:    Yes, series, send/return Speaker configuration:    1x10" Speaker model:    Celestion V-type 10” (16?, 50W) Unit impedance:    16? Preamp valves:    2 x ECC83, 1 x ECC83 (phase splitter) Power amp valves:    2 x EL34 Accessories:    Detachable power cable included Dimensions:    500mm / 19.7" (W) X 460mm / 18.1" (H) X 245mm / 9.6" (D) Weight:    15.9kg / 35 lbs 

Read more less

 Nothing produces that classic "British" sound like a Marshall amplifier, whether it's a combo or head and cab configuration.The Marshall Code Series amplifiers recreate decades of classic Marshall sounds in a single amp. This 2-way momentary footswitch is designed for use with the CODE Series amps, giving you hands free access to up to 100 presets.  Switch one is to scroll up through the amps presets and switch two scrolls down the presets. It has built in indicator lights to show you which control is being used so you can't accidentally go the wrong way. The PEDL-91010 lets you get the most out your CODE's capabilities. 

Read more less

 Marshall PEDL-90011 1-Way Latching Footswitch w/LED A single latching footswitch built for DSLH and DSL1C. With this footswitch you can easily change between the ultra gain and classic gain channels on the amp. It has indicator lights so that you can see when it is in use.

Read more less

 This 20W combo is designed for those that like expression through innovation. Using a Celestion V type speaker the Origin20CTM provides a classic all-valve Marshall tone.  A 2-way footswitch allows you to control the gain boost and turn the FX loop on and off. With classic styling and modern features this amp generates rich, harmonic tones so that you can craft a sound to suit your personality.   FEATURES Packed with 3 ECC83 preamp tubes and 2 EL34 power tubes 10" Celestion V-type speaker provides classic British tone Separate Gain and Master controls for dialing in the right amount of crunch Presence knob and 3-band EQ for shaping your tone Unique Tilt control blends bright and normal sounds Switchable Low/Mid/High power enables high-output sounds at any volume TECHNICAL SPECIFICATION GENERAL Model: Origin20C Range: Origin Technology: Valve Channels: 1 ELECTRONICS Output wattage: High power 20W, mid power approx 3W and low power approx 0.5W Outputs: Speaker outputs: 3 x 1/4" jack sockets (16? load / 8? load), DI out (1/4" jack) Inputs: 1 x 1/4" jack instrument input, footswitch Controls: Gain, boost, tilt, bass, middle, treble, master, presence, powerstem Effects: None Effects loop: Yes, Series, Send/Return  SPEAKERS Speaker configuration: 1x10" Speaker model: Celestion V type (16?, 50W) Unit impedance: 16?  VALVES Preamp valves: 3 x ECC83 Power amp valves: 2 x EL34  ACCESSORIES Footswitch: PEDL-90016 included Cable: Detachable power cable included  DIMENSIONS (INCLUDING FEET AND HANDLE) Weight: 13.9 kg / 31 lbs Width: 520 mm / 20.5" Height: 440 mm / 17.3" Depth: 240 mm / 9.4"

Read more less

 The British-built, 50 Watt all-valve 2 x 12" JVM205C offers a straightforward two-channel preamp, Clean/Crunch and Overdrive, for guitarists who prefer a more stripped down, "fewer frills" approach. The two independent channels both have three modes. Each mode reconfigures the gain structure of each channel, making six modes in total, which can take you from "Plexi"/JTM45 cleans through JCM800 roar to modern high gain tones. The JVM205C is equipped with the same groundbreaking technology as the JVM410C, featuring two studio quality Reverbs (one per channel), with individual channel EQ, two Master Volumes, and a memory that will recall you Reverb, FX Loop and Master settings. The JVM205C uses Stompware switching technology and comes supplied with a fully programmable, four-button footswitch which connects to the amp using a standard guitar lead, so you're not restricted by stage size - and if your cable fails, it's very easy to replace: Highly intelligent. The JVM205C is loaded with a 12" Vintage 30 speaker and a 12" Heritage speaker, both of which have unique tonal characteristics, and combined give you the best of both sonic worlds. SPECIFICATIONS Impedance    16ohms EQ    Volume/Gain/Bass/Middle/Treble x 2, Reverb x 2, Channel Select x 2, Presence, Resonance, FX Loop, Footswitch/Programme Inputs    1 Model    JVM205C No. of Channels    2 Speaker    1 Celestion Vintage, 1 Celestion Heritage Total Power    50watts Tube    4 x ECC83, 1 x ECC83, 2 x EL34

Read more less

 The original JCM800 2203 changed the face of modern amplifiers forever. Updated and enhanced, the Studio Classic SC20H is here to do it all over again.  Replicating their first amp that truly embodied the overdriven sound of heavy rock, Marshall's portable SC20H brings timeless sounds to the modern guitarist, with the option to switch between 20W and 5W at the flick of a button. SPECIFICATIONS Output wattage    20W (with power reduction option to 5W) Outputs    5 x 1/4” jack sockets, selectable 16? / 8? / 4? load Inputs    2 x 1/4" jack instrument inputs (high/low sensitivity) Controls    Presence, bass, middle, treble, master volume, preamp volume Effects    None Effects loop    Yes, series, send/return Preamp valves    2 x ECC83, 1 x ECC83 (phase splitter) Power amp valves    2 x EL34 Accessories    Detachable power cable & speaker cable included Dimensions (including feet and handle)    510mm / 20.1" (W) X 240mm / 9.4" (H) X 240mm / 9.4" (D) Weight    9.4 kg / 20.7 lbs 

Read more less

 The JVM210C is a straightforward 'no-frills' 2-channel amp aims to bring out from Plexi/JTM45 cleans to JCM800 distortion tones. The channels each has 3 modes which offers 6 configurations in total at your tonal disposal. SPECIFICATIONS  Accessories: Footswitch, Power Cable Impedance: 16 Ohm Effects: Reverb x2 Effects Loop: Yes, x2 Model: JVM210C No. of Channels: 2 Speaker: 2 x 12", Celestion Vintage with Celestion Heritage Total Power: 100w Tube: 4 x ECC83, 1 x ECC83, 2 x EL34 Type: Tube 

Read more less

FEATURES 30W, 1-channel 2 x 3.5-inch portable guitar amplifier Includes 3 realistic microphone models and Nylon Str and Flat modes XLR input and mic pre allow you to sing and play through the same amplifier Bluetooth support for streaming audio and preset editing via Yamaha’s THR Remote app Hi-fi audio playback and Extended Stereo Technology make backing tracks sound great 3-band EQ lets you tweak your tone to perfection Runs on internal, rechargeable battery or AC power Built-in Line 6 wireless receiver is compatible with the Line 6 G10T transmitter (sold separately) 5 user preset slots let you save and recall your favorite tones Stereo Line output lets you plug into a PA system for live applications USB connection provides 2 channels of recording to your computer and 2 channels of playback from your computer SPECIFICATIONS Type : Solid State Number of Channels : Single channel Total Power : 30W Reverb : Yes Effects : Chorus, Delay Amp Modeling : Yes, 3 x acoustic, 1 x nylon, 1 x flat EQ : 3-band EQ Inputs : 1 x 1/4", 1 x 1/8" (aux in) Outputs : 2 x 1/4" USB : 1 x Type B Bluetooth : Yes Headphones : 1 x 1/8" Computer Connectivity : USB, Bluetooth Power Source : Rechargeable Battery, 15V DC power supply Height : 7.6" Width : 16.5" Depth : 6.1" Weight : 9.7 lbs. Dimension Packaging Weight : 12.0 kg

Read more less

FEATURES 30-watt, 1-channel 2 x 3.5-inch portable guitar amplifier 15 excellent guitar tube amplifier emulation settings give you access to every popular amp style 3 bass amplifier emulations, 3 mic models for your acoustic-electric, and flat modes for everything else Great-sounding modulation effects, echoes, and reverbs for polishing your performance Yamaha’s Virtual Circuitry Modeling (VCM) technology delivers extremely realistic sound and feel 3-band EQ lets you further tweak your tone to perfection Runs on internal, rechargeable battery or AC power Bluetooth support for streaming audio and preset editing via Yamaha’s THR Remote app USB connection provides 2 channels of recording to your computer and 2 channels of playback from your computer Dual 3.5-inch speakers provide stereo audio for internal effects and Bluetooth/computer audio playback Headphone output with adjustable aux input/amplifier output control makes getting the perfect playback balance easy 5 user settings buttons let you take your favorite tone with you anywhere for instant recall Built-in wireless receiver is compatible with the Line 6 G10T transmitter (sold separately) SPECIFICATIONS Type: Solid State Number of Channels: Single channel Total Power: 30W (2 x 15W stereo), 15W (battery) Speaker Size: 2 x 3.5" Reverb: Spring, Hall Effects: Chorus, Flanger, Phaser, Tremolo, Echo ; THR Remote: Compressor, Noise Gate Amp Modeling: 15 x Amp Model Combinations, Acoustic Mic Models, Bass Amps, Flat Voicings EQ: 3-band EQ Inputs: 1 x 1/4", 1 x 1/8" (aux in) Outputs: 2 x 1/4" (line out) USB: 1 x Type B Bluetooth: Yes (audio, remote) Headphones: 1 x 1/8" Features: Built-in WIreless Receiver Computer Connectivity: USB Software: Cubase AI, THR Remote app Power Source: 15V DC power supply / Internal Rechargeable Battery Height: 7.68" Width: 16.4" Depth: 6.1" Weight: 9.48 lbs. Dimension Packaging Weight : 10.0 kg

Read more less

Taming a screaming-loud tube amp doesn’t always require bulky and expensive load boxes and attenuators. The JHS Pedals Little Black Amp Box takes care of the job while being able to fit into the palm of your hand. Simply run it through your amp’s effects loop and control the amount of signal you send to your amplifier’s power section. You’ll love the way the Little Black Amp Box lets you really push the front end of your amp for the natural feel and tone that you can’t get any other way. FEATURES Small size is ideal for saving pedalboard space or even setting on top of your amp Can easily be mounted underneath your board Built rugged Black powder coating keeps the buffer hidden in the background This pedal does not require power and it measures 3.6"x1.5"x1"

Read more less

The JTS CX-508W Wind Instrument Microphone for JTS Wireless Body Packs is a Condenser Instrument microphone for JTS wireless body pack systems. Designed specifically for wind instruments. ideal for Saxophones. It has a wide dynamic range and crystal-clear, crisp sound. features an Integrated spring-type clamp to attach to a horn. The robust gooseneck, can be turned by 230° 1.4 m cable with fitted 4-pole mini XLR plug for direct connection to an optional pocket transmitter from JTS Supplied in a robust transport case with windshield.

Read more less

JOYO DC Series Transistor Digital Guitar Amplifier DC-30 is a cost-effective home practicing amplifier, it has almost all built-in guitar effects you may require, 8 basic effects like JC-120, TS Overdrive, Crunch Box, MT2 Distortion, etc, 4 modulation effects of Chorus, Phaser, Tremolo and Flanger, 2 special effects Delay and Reverb, which makes it easy to adjust your favorite tones. Moreover, its drum module makes it better for impromptu performance and AUX Input brings music for your performance. It is a guitar amplifier integrated of multiple effects, offering the most convenient electric guitar equipment solution FEATURES Eight Amp simulations : Boss SD-1 Boss MT-2 Ibanez TS9 Wave-X C-Clean Roland Jazz Chorus MI Audio Crunch Box Wave-X Power Drive - Lead Wave-X Power Drive - Rhythm Four modulation effects : Chorus Flanger Phaser Tremolo Two special effects : Delay Reverb Dimension Packaging Weight : 12.0 kg

Read more less

FEATURES RMS: 60W Speakers? 1 x 10" Speaker and 1 x 3" tweeter Input?L?MONO?/R Built-in 3-band EQ Bluetooth4.0 for music playing Built-in Live stream Output Jack ( iOS/Android ), plug and play Power adapter:28V4.5A Dimension Packaging Weight : 17.0 kg

Read more less

The immense wall of sound that is coming out of the little ZOMBIE is unbelievable. This is the type of sound that we know from the huge 150 Watt tube heads, but you would never expect a small and portable amplifier to sound so huge and aggressive. Your chords will chug and punch. Your solos will cut through the mix.   The ZOMBIE also works great at lesser gain settings and lets you use your favorite overdrives to push it into higher gain with their own unique flavors.    Once you start working with this amp, you will soon forget its size and very affordable price. It will feel as if you are playing through a much bigger head and your friends just won’t believe where your sound is really coming from.   The amp operates with a single 12AX7 tube in the preamp and uses a solid-state power amp.    The FX loop enables you to put your time-based effects (or Phasers, Flangers, and Choruses) behind the drive section and keep the effects sharp and not prevent them from being too muddy. Because of the High Gain structure of this amp, a noise gate, like our “Gate of Kahn“ is a good idea to make your heavy chords nice and tight.   The amp also has a CLEAN channel that can take pedals really well, which makes it flexible and a great little companion for many situations where your "big" head is just not sensible.   The amp has a speaker out rated at 8?.   Careful, the amp is small, but loud… its 20 Watts can be quite a handful. If you want to practice quietly, use the built-in headphones out with speaker emulation.   The icing on the cake is the BLUETOOTH connectivity. Easily connect with your BLUETOOTH-enabled device and play music through the Bantamp. This is great to practice with PlayAlongs or to learn songs.   Features   Preamp circuit - Operational amplifier + 1 x 12AX7/ECC83 Power amp - CLASS D Amp power - 20W Channel mode - CLEAN / OD Aux in function - Bluetooth music playing Bluetooth version - 4.0 Input - AC 110-240V 50/60Hz OUTPUT - DC18V/2.0A

Read more less

The VIVO from JOYO’s BantamP series is a very compact and portable 20 Watt head. It tries to bring you the sound of a British classic that has been molded to give you the modern high gain tones that so many bands now use. Back in the day, the big 100 Watt heads were “dimed” (all knobs on 10) to push the amplifier really hard and make it distort as much as possible. Out of this came the first amps that were modified to have more gain right from the start. Often, the supersaturated high gain sound of those days is referred to as “The Brown Sound” and this is the direction the VIVO excels in.   Screaming leads, chunky rhythms with a bit of a hole in the mids… this is where the VIVO is strongest. If you wanna rock’n’roll, VIVO is going to be your new best friend!   The amp operates with a single 12AX7 tube in the preamp and uses a solid-state power amp.   The FX loop enables you to put your time-based effects (or Phasers, Flangers, and Choruses) behind the drive section and keep the effects sharp and not prevent them from being too muddy.   The amp also has a CLEAN channel that can take pedals really well, which makes it flexible and a great little companion for many situations where your “big” head is just not sensible.   The amp has a speaker out rated at 8?, but can also be operated at 16? with less power.   Careful, the amp is small, but loud… its 20 Watts can be quite a handful. If you want to practice quietly, use the built-in headphone out with speaker emulation.   The icing on the cake is the BLUETOOTH connectivity. Easily connect with your BLUETOOTH-enabled device and play music through the BantamP. This is great to practice with PlayAlongs or to learn songs.    Features   Preamp circuit - Operational amplifier + 1 x 12AX7/ECC83 Power amp - CLASS D Amp power - 20W Channel mode - CLEAN / OD Aux in function - Bluetooth music playing Bluetooth version - 4.0 Input - AC 110-240V 50/60Hz OUTPUT - DC18V/2.0A

Read more less

i-plug is a Guitar amp with headphone output and built-in overdrive sound effects, when you plug in your headphone, it allows you to practice your instruments without disturbing others or being disturbed when you use the regular amplifying speaker with the hassles of guitar cables and pedals.    i-plug can serve as a mini audio card when connected to smart devices such as iPhone, iPad, iPod, Android/Windows phones with your favorite apps you get from app stores. And then you can easily use this system to record your practice or performance.   i-plug has one mono Jack(6.35mm), one 4-pin 3.5 jack for apple devices(an adapter might be required to reverse polarity for connection to other Android or Windows smartphones), one 3.5mm stereo headphone output. It is powered by a 3V battery, the control panel has a drive knob, a tone knob, and a volume knob!   Features   Compact and light-weight design, not bigger than a hand of the adults. Built-in distortion effect. Designed with 3 Controls : Volume, Tone, Gain. 6.35mm Instrument Jack for Guitar or Bass 3.5mm 4-pin Jack for connecting to mobile device

Read more less

Rechargeable--JOYO Mini Guitar amp is built in rechargeable battery, 1.5 hours(on FULL LOAD condition) to 6 hours play time once get fully charged, package included USB charging cable, or you can use any 5V battery charger(Rated Output Currrent?1A), Nearly all smart phone chargers meet this requirement. Rich Interfaces--1/8" Auxiliary Input Jack for Jam-Along with Media Player or CD, 1/8" Headphone Output Jack for Silent Practice. Bluetooth Function--Built-in bluetooth communication units (Bluetooth version:5.0), you can connect it to devices with Bluetooth function to play music. Innovative Design--Small size yet huge energy, JA-02 II feature the independent knobs for the volume of AUX IN/Bluetooth and input volume, you can more precisely equalize the volume of background music and instrument sound. Two Channels--There are two tone channels (Clean/Distortion). You can choose different tones by adjusting GAIN and TONE, which is more suitable for playing different styles of music.

Read more less

It’s been 2 years since JOYO launched the BanTamP series, and received numerous positive feedbacks, many clients take them along for performance, connecting with JOYO 212/412 cabinets, the little head takes you by storm. We’ve optimized the BanTamP series based on customers’ feedbacks, and now we’ve developed the brand new BanTamP XL series! Retaining the original tones and functions, the BanTamP XL series features a channel switching footswitch, 6 knobs---specifically speaking, 2 channels can be controlled independently, now you have better control over the volume of CLEAN Channel and DISTORTION Channel, and adjust their GAIN and TONE independently too! Well, the BanTamP XL series is definitely a better choice for musicians who love to perform with the BanTamP series!   Featutres   Power adapter - INPUT AC 100-240V 50/60Hz OUTPUT DC18V/2.0A Rated power - 20W/8? Headphone Impedance - Standard 32? Minimum16? Bluetooth version - 4.0 Speaker Impedance - 8?  Dimension     - 163mm×110mm×140mm Weight - 1300g Channel - Clean and Overdrive

Read more less

Joyo Top-GT guitar amplifier is another innovative product that boasts the versatility of a mini guitar amp. You can plug in your electric guitar and jam along with Top-GT playing your favorite melodies. Top-GT is so portable that it is ideal to travel with as a practice guitar amp and a powerful multimedia bluetooth speaker!   FEATURES Multi-function guitar amp with bluetooth 4.0 connectivity Control knobs of VOICE, GAIN, TONE, VOLUME, MASTER Built-in Lithium battery with a quick charge time of 2.5 hours 9V/4000mAh power adaptor Dimension Packaging Weight : 1.2 kg

Read more less

Rechargeable--JOYO Mini Guitar amp is built in rechargeable battery, 1.5 hours(on FULL LOAD condition) to 6 hours play time once get fully charged, package included USB charging cable, or you can use any 5V battery charger(Rated Output Currrent?1A), Nearly all smart phone chargers meet this requirement. Rich Interfaces--1/8" Auxiliary Input Jack for Jam-Along with Media Player or CD, 1/8" Headphone Output Jack for Silent Practice. Bluetooth Function--Built-in bluetooth communication units (Bluetooth version:5.0), you can connect it to devices with Bluetooth function to play music. Innovative Design--Small size yet huge energy, JA-02 II feature the independent knobs for the volume of AUX IN/Bluetooth and input volume, you can more precisely equalize the volume of background music and instrument sound. Two Channels--There are two tone channels (Clean/Distortion). You can choose different tones by adjusting GAIN and TONE, which is more suitable for playing different styles of music.

Read more less

TWEEDY features dual channel, American classic vintage tone, the DISTORTION has a lttle bit of FUZZ, while the CLEAN sound has rich lows. It recreates the classic Rock and Blues of the 20th century. Especially, what makes this amp so unique is its VOICE knob, you can boost or attenuate the mids according to your guitar playing, meanwhile, adjust VOICE knob combined with Gain knob, you are able to get more interesting tones. The icing on the cake is the Bluetooth connectivity is great to practice with Play Alongs or to learn songs. Careful, the amp is small, but loud… its 20 Watts can be quite a handful. If you want to practice quietly, use the built in headphone out with speaker emulation.   Features   Dual Channel: CLEAN, DISTORTION Channel-switching Footswitch Bluetooth FX LOOP 8? speaker out

Read more less

Joyo Top-GT guitar amplifier is another innovative product that boasts the versatility of a mini guitar amp. You can plug in your electric guitar and jam along with Top-GT playing your favorite melodies. Top-GT is so portable that it is ideal to travel with as a practice guitar amp and a powerful multimedia bluetooth speaker!   FEATURES Multi-function guitar amp with bluetooth 4.0 connectivity Control knobs of VOICE, GAIN, TONE, VOLUME, MASTER Built-in Lithium battery with a quick charge time of 2.5 hours 9V/4000mAh power adaptor Dimension Packaging Weight : 1.2 kg

Read more less

FEATURES Fully programble Dual 4 channel loop design 2 x on board fully programble trigger switch (relay) 1 x MIDI out MIDI CC and MIDI program change command are available simultaneously Buffered bypass Rated power supply votage:DC 9V Rated current consumption:220Ma Dimension Packaging Weight : 2.04 kg

Read more less

JOYO JBA-100 - 100W Bass Guitar Combo Amplifier The largest of the JOYO JBA series, the JBA-100 provides 100 watts of output power. Suitable for punching through at any live show, the JBA-100 comes with a 7-band graphic equalizer to achieve that ideal tone, a headphone input for quiet practices, and you can even play along to your own music with the auxiliary/CD input. Speaker and direct outputs as well as an effects send and return open up the possibilities for any type of music and any level of playing skill. Onboard Graphic EQ To add to the large list of features, the JBA-100 comes with a 7-band EQ, ranging from 80Hz to 5kHz. Easily create your own perfect tone by making fine adjustments, and further boost these with the separate bass and treble controls. Auxiliary, Headphones and More! Featured on the JBA-100 are a huge number of inputs and outputs - making this the ideal go-to amp. On the front, the auxiliary/CD input allows you to connect up any phone, iPod or external music source, so you can play along with your favourite songs, or even your own backing tracks. The headphone input is great for when you need to keep the noise down, and for late night at home practices. Dual Inputs With Active and Passive inputs, the JOYO JBA-100 will suit any style of bass. Whether your instrument has a battery operated pick up and is active, or is a simple plug-and-go passive model, the JBA-100 has an input specially designed so you can get the most of out of your bass. On The Back The JOYO JBA-100 has even more features on the back: effects loop, direct output and speaker output. The effects loop is great for those who have a number of effects - patch your pedals in after the preamp stage and unclutter your sound. The amplifier itself can be connected to other speakers through the rear speaker output. You can also directly feed the amplifier into another source using the direct output. Perfect for connecting to a mixer in a live situation. The large rear bass port increases the efficiency of your low frequencies, giving you that floor-rumbling thump. Portable and Perfect For Any Situation JOYO have designed the JBA-100 to be easy to use, move and hear. The angled tilt design allows the user to lean the amp back, directing the sound higher so it can better be heard while practicing. The top mounted carry handle makes this amp easily portable, so you can transport the JBA-100 with no hassle at all. Features: Bass and Treble Contols, with a 7-Band Graphic EQ Volume and Limiter Control Knobs Limiter Indication Light Angled Tilt Design Top Mounted Carry Handle Specifications: Model: JBA-100 Speaker Size: 15" Active/Passive Instrument Inputs: 1/4" (6.36mm) TS Headphone Input: 1/4" (6.35mm) TRS stereo Auxiliary: 2x RCA Effects Send/Return: 1/4" (6.35mm) TS Direct Output: XLR(m) Speaker diameter: 15" Rated output power: 100W (@ 1kHz, 8ohm, 5% THD) Rated input level (@1kHz): Passive: -20dBu Active: -10dBu Total Harmonic Distortion: 0.3% (@ 1dB, 1kHz) Signal to noise ratio: 67dB (@1dB, 1kHz) Dynamic range: 66dB (Rated output @1kHz) Signal gain: Input to direct out: -20dB Input to preamp out: +20dB Input to speaker out: +51dB Equalizer: Base (100Hz): +/-15dB Treble (10kHz): +/-15dB Graphic EQ (+/-12dB): 80Hz, 160Hz, 315Hz, 630Hz, 1.25kHz, 2.5kHz, 5kHz Headphone output: 700mW @600 ohms Dimensions: 459 x 417 x 576mm Weight: 27.6kg

Read more less

MA-10 series features various tones. Each model has dual-channel dedicated for the related instruments, therefore you can switch easily: MA-10B: Switchable Normal / Drive dual-channel MA-10 series is compact and portable. There are 2 hidden shoulder strap buckles on both sides of the amp, you can hang the shoulder strap on the buckles when fully rotate the 2 buckles.   High-quality Aux-In Jack for playing backing tracks, 3.5mm stereo Headphone Output Jack, ensuring subtleness of music and interference-free. 5 inches customized full frequency speakers, with a rated power of 10W(RMS), full frequency speakers dedicated for the related instruments. In different power supply modes, you can use the attached power adapter or 6xAA batteries, about 3hrs battery life with AA alkaline batteries. Innovative logo. The logo of the MA-10 series will light when it’s switched on. . Features   Rated power - 10W Speaker’s size - 5’’ Power supply mode - 9v1200mA power adapter or 6xAA batteries Battery life - the ordinary AA batteries, about 3hrs Dimensions - 240*150*170mm Weight - 1300g Strap is not included.

Read more less

MA-10 series features various tones. Each model has dual-channel dedicated for the related instruments, therefore you can switch easily: MA-10E: Switchable Clean / OD dual-channel With built-in OD channel, perfect for the mainstream metalcore genre. MA-10 series is compact and portable. There are 2 hidden shoulder strap buckles on both sides of the amp, you can hang the shoulder strap on the buckles when fully rotate the 2 buckles.   High-quality Aux-In Jack for playing backing tracks, 3.5mm stereo Headphone Output Jack, ensuring subtleness of music and interference-free. 5 inches customized full frequency speakers, with a rated power of 10W(RMS), full frequency speakers dedicated for the related instruments. In different power supply modes, you can use the attached power adapter or 6xAA batteries, about 3hrs battery life with AA alkaline batteries. Innovative logo. The logo of the MA-10 series will light when it’s switched on.   Features   Rated power - 10W Speaker’s size - 5’’ Power supply mode - 9v1200mA power adapter or 6xAA batteries Battery life - the ordinary AA batteries, about 3hrs Dimensions - 240*150*170mm Weight - 1300g Strap is not included.

Read more less

  It’s been 2 years since JOYO launched the BanTamP series of guitar amplifiers and we always knew that these amps would be popular at home, in practice and even in performance. They might be small but they are extra mighty in sound. Over the last 12 months we have been developing the brand new BanTamP XL series! We have retained the original tones and functions as the original but the BanTamP XL series now features a channel switching footswitch, with independent controls to adjust each channels tone and gain settings.   SPECIFICATIONS Power: 20 Watt Preamp with 12AX7 tube 2 Channels: Clean and overdrive Controls: Gain, tone and volume FX loop Bluetooth On / Off switch (for receiving a Bluetooth signal) 8 or 16 Ohm loudspeaker output Headphone output over 3.5 mm mini-jack Dimensions: 163 x 110 x 140 mm Weight 1.2 kg Dimension Packaging Weight : 1.8 kg

Read more less

The MeteOR from JOYO’s BantamP series is a very compact and portable 20 Watt head.   It gives you a modern high gain sound with a lot of dirt and bites. Based on a more modern British approach to heavy sounds, it excels in a variety of genres. It was the punk and indie scene that introduced those sounds to the world, but today, due to an increase in gain, also the metal players enjoy this alternative British flavor. The Meteor can give you those sounds in a tiny package and deliver a hefty punch of gain and bottom end.   The amp operates with a single 12AX7 tube in the preamp and uses a solid-state power amp. The FX loop enables you to put your time-based effects (or Phasers, Flangers, and Choruses) behind the drive section and keep the effects sharp and not prevent them from being too muddy.   The amp also has a CLEAN channel that can take pedals really well, which makes it flexible and a great little companion for many situations where your “big” head is just not sensible.   The amp has a speaker out rated at 8?, but can also be operated at 16? with less power.   Careful, the amp is small, but loud… its 20 Watts can be quite a handful. If you want to practice quietly, use the built-in headphone out with speaker emulation.   The icing on the cake is the BLUETOOTH connectivity. Easily connect with your BLUETOOTH-enabled device and play music through the BantamP. This is great to practice with PlayAlongs or to learn songs.    Features   Preamp circuit - JFET+ 1 x 12AX7/ECC83 Power amp - CLASS D Channel mode - CLEAN / OD Amp power - 20W(RMS) Aux in function - Bluetooth music playing Bluetooth version - 4.0 Input - AC 110-240V 50/60Hz OUTPUT - DC18V/2.0A

Read more less

Improved on the JPA-861, the JPA-862 has more functions and it is even in smaller shape. It is a portable amp as ever that you can easily move around which serves as your best companion for your road show. This brand new JPA-862 will present you in a live scene by its 12W+12W stereo output, its media player which presets four EQ modes ensure the best performance effects, newly added Aux in connector and charging voltage indicator also better your user experience. Moreover, it is 30% lighter than the JPA-861, making it easy for you to bring it anywhere. With the JPA-862, music is everywhere. SPECIFICATIONS Peak power: 300W SPL: 95dB (1W/1M) Speaker Impedance: 6.5?4Ohm Frequency Response: 70Hz–18 KHz Available time: 5 hours Two separate instrument channels and two microphone channels with reverb and delay effects. Its panel has AUX IN connector, USB interface, SD slot input Equipped with hand microphone and wireless head-mounted microphone Net weight: 9.28KG Dimensions: 290*390*185mm Dimension Packaging Weight : 11.4 kg

Read more less

MA-10 series is specially designed for different instruments, MA-10A: amp for acoustic guitar, ukulele   MA-10 series features various tones. Each model has dual-channel dedicated for the related instruments, therefore you can switch easily: MA-10A: Switchable Normal / Bright dual channel. MA-10 series is compact and portable. There are 2 hidden shoulder strap buckles on both sides of the amp, you can hang the shoulder strap on the buckles when fully rotate the 2 buckles.   High-quality Aux-In Jack for playing backing tracks, 3.5mm stereo Headphone Output Jack, ensuring subtleness of music and interference-free. 5 inches customized full frequency speakers. With a rated power of 10W?RMS?, full frequency speakers are dedicated for the related instruments. In different power supply modes, you can use the attached power adapter or 6xAA batteries, about 3hrs battery life with AA alkaline batteries. Innovative logo. The logo of MA-10 series will light when it’s switched on.   Features   Rated power - 10W Speaker’s size -  5’’ Power supply mode - 9v1200mA power adapter or 6xAA batteries Battery life - the ordinary AA batteries, about 3hrs Dimensions - 240*150*170mm Weight - 1300g Strap is not included.

Read more less

It took JOYO’s engineers two years to develop this patented new product: TheJAMBUDDY Combining guitar playback with its reduced high frequency range due to the sound of 12 inch speakers and also full range normal music playback is a difficult task. Some products on the market have already dealt with this issue and they are nice practice boxes that are controlled by hand on a table top. But this is not how guitar players operate their gear, we need our hands free and we stick our gear with our feet. JAMBUDDY combines both aspects, it is a floor based dual channel amp simulator that can be switched with your feet and also accepts a BLUETOOTH signal to play back your favorite backing tracks and songs you want to jam along to.   JAMBUDDY has a rechargeable battery, a built in delay and it accepts pedalsin front of it really well. Everything you need to practice and have a great time.doing it!   Amp power: 2x4W Speakers: 40mm (about 2”) x 2 Guitar’s channel: CLEAN Channel, OD Channel (CLASS and HIGAIN mode can be switched by pedal? DELAY effect control knob: TIME/ MIX/ FEEDBACK Control pedal: CHANNEL switching pedal/OD MOD switching pedal Input and output: Guitar input/Headphone AC adapter output voltage: DC 9V/3A

Read more less

This neat looking mini JOYO guitar amplifier comes with 9V battery and headphones, offers two different sounds from clean to distortion and is portable with enough output to practice or bring outside and enjoy. This is really the most feature-packed and tone-VOLUME-enable little amp on the market. With MP3 input for 3.5mm input, ideal for playing along to backing tracks and music stored on your phone, or tablet. Also with a headphone input, making it a great practice amp using a pair of headphones. Absolutely great at home where volume may otherwise be a problem. Ideal for practice, beginners and for those who might want to add a little more volume to their instrument. Specification Power output: 3 watt. Earphone input jack: 3.5 mm. LED Indicator. Power: 9V DC or 6F22 battery. Made of ABS plastic. Available in Black.

Read more less

SPECIFICATIONS Input Sensitivity -10 dBu RMS power: 3 5W Sensitivity: 92 dB Frequency response: 70 Hz–18 kHz Speaker impedance: 10?8 Ohm Bluetooth version: 4.0 Power adapter: Input 100 - 240 V AC 50 / 60 H z; Output 24 VDC / 2 . 5 A Current consumption: 1.8 A (Max) Net weight: 9.9 Kg Dimensions: 424 x 420 x 335 mm Dimension Packaging Weight : 12.0 kg

Read more less

The JaCkMan from JOYO’s BantamP series is a very compact and portable 20 Watt head. It tries to bring you the iconic raw sound of one of the most famous British rock amps. This classic was an untamed beast with its 100W and chunky nature.    The JaCkMan has to fill some giant shoes and it manages to have the same mid-gain drive sound that reacts beautifully to your playing and guitar volume. Just like the classic rock monster, the JaCkMan needs a bit of help to push it further.   Use a TS-type pedal (like the Joyo Green Legend or Vintage Overdrive) to push it into the higher gain territory and hear it sing.  The amp operates with a single 12AX7 tube in the preamp and uses a solid-state power amp.    The FX loop enables you to put your time-based effects (or Phasers, Flangers, and Choruses) behind the drive section and keep the effects sharp and not prevent them from being too muddy.   The amp also has a CLEAN channel that can take pedals really well, which makes it flexible and a great little companion for many situations where your “big” head is just not sensible.   The amp has a speaker out rated at 8?.   Careful, the amp is small, but loud… its 20 Watts can be quite a handful. If you want to practice quietly, use the built-in headphones out with speaker emulation.   The icing on the cake is the BLUETOOTH connectivity. Easily connect with your BLUETOOTH-enabled device and play music through the BantamP. This is great to practice with PlayAlongs or to learn songs.   Features   Preamp circuit - Operational amplifier + 1 x 12AX7/ECC83 Power amp - CLASS D Amp power - 20W Channel mode - CLEAN / OD Aux in function - Bluetooth music playing Bluetooth version - 4.0 Input - AC 110-240V 50/60Hz

Read more less

FEATURES 1 x 12AX7 Preamp tube Clean Channel Distortion Channel FX Loop Bluetooth Headphone Out Built in Cab Speaker Amp Simulation Rated power : 20W Speaker impedance : 8O/16O SPECIFICATIONS Power adapter : AC input 100 - 240 V 50/60 Hz DC output 18 V / 2.0 A. Nominal power : 20 W / 8 ?. Speaker impedance : 8 ?. Speaker impedance : standard 32 ? minimum 16 ?. Package size : 10 x 6.3 x 6.5 inches Package Weight : 4.1 lbs. Dimension Packaging Weight : 1.8 kg

Read more less