New Arrivals
-
Electro-Voice EVERSE12-TRAY Tray for EVERSE 12 Speaker ( EVERSE12 TRAY / EVERSE12TRAY )
The EVERSE12-TRAY-B from Electro-Voice is a secure mounting tray for wireless microphone receivers such as the Electro-Voice RE3 or R300, and other equipment such as tablets or smartphones. The hook and loop strap combined with integrated locating notches keep both microphone receivers and microphones secure. A DC power cable is included to power your RE3 or R300 receiver with the EVERSE 12’s battery. Available in black.Electro-Voice EVERSE12-TRAY-B Features Secure mounting tray for wireless microphone receivers such as the Electro-Voice RE3 or R300, and other equipment such as tablets or smartphones The hook and loop strap combined with integrated locating notches keep both microphone receivers and microphones secure DC power cable included to power your RE3 or R300 receiver with the EVERSE 12’s battery Available in black
RM695.00
-
Electro-Voice EVERSE12-RAINCVR Rain Resistant Cover ( EVERSE12 RAINCVR / EVERSE12RAINCVR )
The EVERSE12-RAINCVR from Electro-Voice is a rain-resistant cover. The EVERSE 12 loudspeaker with rain cover installed is intended only for temporary use in wet or damp environments. The loudspeaker is not intended to be exposed continuously to moisture over long periods of time. Do not expose to salt water or spray, do not expose to chlorine or use in high chlorine environments.The EVERSE 12 loudspeaker with the rain cover installed is rated for IP44, but only in upright and kickback orientations, and only when used properly as defined in the included Quick user guide. When using the rain cover, the weatherized input cover is optional to achieve the IP44 rating. When the rain cover is installed, the EVERSE 12 loudspeaker is designed to be weather resistant to IP44 standards, but not waterproof.Electro-Voice EVERSE12-RAINCVR Features IP44 rated rain cover. Included bottom flap for tripod position with the cover Included top and side handle pocket to carry the speaker with the cover Drain holes at the bottom allow kickback orientation Included amplifier input pocket to use cables with the rain cover
RM695.00
-
EV Electro-Voice Everse 12 12-inch 2-way Battery-powered PA Speaker - Black ( Everse-12 / Everse12 )
FEATURES 400W battery-powered portable PA system 12-inch woofer and 1-inch compression driver produce clear, crisp sound Lightweight, ergonomic design makes transporting the Everse 12 effortless QuickSmart DSP lets you apply EQ curves, adjust levels, and trigger digital effects Includes 12-volt DC port for powering wireless mic systems EV QuickSmart Mobile app offers quick setup, control, and monitoring of up to six Everse 12 systems Bluetooth capability streams audio wirelessly from any smart device Multi-position enclosure lets you mount the PA however you want Steel grille protects your speakers SPECIFICATIONS Type:Battery-powered PA Speaker Speaker Drivers:1 x 12" woofer, 1 x 1" compression driver Inputs:2 x XLR/TRS combo, 1 x 3.5mm stereo, 1 x TRS Footswitch Outputs:1 x XLR Bluetooth:Yes Total Power:400W Peak Frequency Response:55Hz-20khz (±3 db) Maximum Peak SPL:126dB SPL Horizontal Coverage Angle:100° Vertical Coverage Angle:60° Enclosure Material:Polypropylene Mounting Options:Pole, Floor Battery-powered:Yes, 12 hour run time Power Source:12V DC Power Output Height:23.5" Width:13.58" Depth:13.66" Weight:31.22 lbs. Dimension Packaging Weight : 11.0 kg
RM5,099.00
-
Electro-Voice Everse Battery Pack Assembly for Everse 8 & 12
EVERSE high capacity Li-Ion battery is custom designed to provide more than enough power to complete the show. Cloth carry bag included to protect the battery during transport and storage. Available in black or in white.
RM1,064.00
-
EV Electro-Voice EVERSE8 TOTE Padded Tote Bag for EVERSE 8
Convenient and spacious tote bag designed to carry your EVERSE8 and accessories. Divider and separate pockets provide enough room to carry the EVERSE8-TRAY mounting tray, a wireless microphone receiver, microphone and necessary cables. Protection of EVERSE8 speaker during transport.
RM695.00
-
EV Electro-Voice EVERSE8-WH 2-way Weatherized battery powered speaker with Bluetooth - White ( EVERSE 8 / EVERSE8 )
The first battery-powered loudspeaker from Electro-Voice and the first weatherized model of its type, EVERSE 8 takes advantage of decades of Electro-Voice engineering expertise – along with the latest advancements in technology – to provide a truly portable and truly wireless audio experience at a price and performance level unmatched by current comparable products on the market.Whether used for live music, vocal reinforcement and/or audio playback, musicians, DJs, production/rental companies, fitness/activity instructors and other professional, amateur and recreational users can all benefit from EVERSE 8’s superior sound quality, user-friendliness and all-in-one PA system design – a concept that opens-up real pro-audio performance for a wider range of users than ever before. EVERSE 8 comes in a black or white finish, adding an aesthetic angle to its versatility. Designed to deliver a step up in sound quality for the battery-powered portable PA segment, with high SPL and full-bandwidth coverage Compact, lightweight and weatherized design coupled with extended battery life – longer run time for gigs and events, indoors or outdoors Flexible all-in-one feature set, including QuickSmart Mobile app and Bluetooth® for best-in-class control and streaming, an onboard mixer and studio-quality effects – a user-friendly and versatile choice for musicians, DJs, fitness/activity instructors, events/gatherings and more
RM4,099.00 - RM4,159.00
-
EV Electro-Voice EVERSE8 - TRAY Mounting tray for wireless microphone ( RE3 & R300 ) - Black / White
Mounting tray with a secure mounting surface for wireless microphone receivers like Electro-Voice RE3 or R300, and other equipment such as tablets or smartphones. DC power cable included to power your RE3 or R300 receiver with the EVERSE8’s battery. Available in black and white.
RM485.00
-
EV Electro-Voice EVOLVE30M-CASE Column Speaker Carrying Case w/Wheels ( EVOLVE30MCASE / EVOLVE30M CASE )
About this item Rolling Nylon Case f Evolve 30M Subwoofer with Interi Padding Trolley Hle - Black Wheels
RM1,427.00
-
EV Electro-Voice EVOLVE-TM-B Truss Mount, EVOLVE, Black ( EVOLVETMB / EVOLVE TM B )
Innovative mount system for quick, simple, and reliable installations of EVOLVE column speakers. Sturdy truss mount bracket works with M10 threaded studs found on common truss clamps. Subwoofer and column adapters with NL4connections. Compatible with EVOLVE 30M , EVOLVE 50 and EVOLVE 50M column speakers, available in black. Suggested to use correctly rated speaker cable for installation: wire gauges 1.5 mm2 - 2.5 mm2 (AWG16-AWG14). For use with truss clamps rated for WLL= 20 kg (44 lb) SF = 5:1. The EVOLVE-TM-B is used to suspend EVOLVE 30M , EVOLVE 50 and EVOLVE 50M column speakers remotely from the subwoofer and without the distance pole.Electro-Voice strongly recommends that loudspeakers be suspended taking into account all current national, federal, state and local laws and regulations. Suspending any object is potentially dangerous. Only individuals who have thorough knowledge of the techniques and regulations of suspending objects overhead should attempt to suspend loudspeakers. The truss mount kit is available only in black. It allows the EVOLVE column to be temporarily clamped to trusses and is available with NL4 adapters.The Electro-Voice EVOLVE-TM-B provides users the flexibility to mount the EVOLVE column speaker remotely from the subwoofer and without the distance pole. This provides a safe method for mounting the column speakers higher than the distance pole allows and remote locating the subwoofer for aesthetic or acoustic purposes.
RM1.00
-
EV Electro-Voice EVOLVE-WMK-NB Wall mount kit, EVOLVE, NL4, Black ( EVOLVEWMKNB / EVOLVE WMK NB )
VOLVE Wall Mount kit• Innovative mounting system for quick, simple and reliable installations of EVOLVE column speakers• Sturdy wall mount bracket with 15 degrees of downward tilt, and 45 degrees, each way, of left and right adjustment• Subwoofer and column adapters with NL4 connections• Compatible with EVOLVE 30M , EVOLVE 50 and EVOLVE 50M column speakers, available in black or white• Suggested to use correctly rated speaker cable for installation: wire gauges 1.5 mm2 - 2.5 mm2 (AWG16-AWG14)The EVOLVE-WMK is used to suspend EVOLVE 30M , EVOLVE 50 and EVOLVE 50M column speakers remotely from the subwoofer and without the distance pole.Electro-Voice strongly recommends that loudspeakers be suspended taking into account all current national, federal, state and local laws and regulations. Suspending any object is potentially dangerous. Only individuals who have thorough knowledge of the techniques and regulations of suspending objects overhead should attempt to suspend loudspeakers. The wall mount kit is available in both black and white colors to match the EVOLVE columns speaker system and the venue.The Electro-Voice EVOLVE Wall Mount Kit provides users the flexibility to mount the EVOLVE column speaker remotely from the subwoofer and without the distance pole. This provides a safe method for mounting the column speakers higher than the distance pole allows and remote locating the subwoofer for aesthetic or acoustic purposes.
RM1.00
-
EV Electro-Voice EVOLVE50-CASE Column Speaker Carrying Case w/Wheels ( EVOLVE50CASE / EVOLVE50 CASE )
Designed specifically for the Evolve 50 subwoofer, this durable rolling case from EV protects your subwoofer from dust, moisture, and dings en route to the gig. This case is made from a tough nylon outer shell and also features interior padding that provides an extra level of protection that gives you peace of mind while you travel. Sweetwater Evolve 50 users love this versatile case's trolley handle and four wheels that make transport much easier. Electro-Voice Evolve 50 Carrying Case Features: Durable nylon soft case with wheels protects your Evolve 50 during transit Interior padding provides great protection from dings and dents Trolley-style handle is ergonomic and saves your back from strain
RM1.00
-
Electro-Voice ZLX-15-CVR Padded Cover for ZLX-15, ZLX-15P & ZLX-15BT Speakers ( ZLX15CVR / ZLX 15 CVR )
Exterior 300 x 600 Poly black Lining 1509 fleece with K 319 foam Binding PP (Polypropylene) Tough, long-wearing nylon shell defends against liquid spills and dust/dirt. Interior padding helps prevent damage from minor impacts. EV logo prominently displayed on every cover. Made to exacting EV standards for superior fit and finish.
RM396.00
-
Electro-Voice ZLX-BRKT | Bracket for ZLX-12 ZLX-12P ZLX-15 ZLX-15P ( ZLXBRKT / ZLX BRKT )
About this item Mount for ZLX Series loudspeakers Dimensions (H x W x D): 475 mm x 108 mm x 107 mm Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
RM533.00
-
Electro-Voice ZLX-12-CVR Padded Cover for ZLX-12 Two-Way Passive Loudspeaker ( ZLX12CVR / ZLX 12 CVR )
Store, transport, and protect your ZLX-12 Two-Way Passive Loudspeaker from dirt, dust and scratches with the black ZLX-12-CVR Padded Cover from Electro Voice. The cover is made of polypropylene with fleece lining and has a black hook and loop fastener. Users will appreciate the handle access openings, exterior slip-in accessory pocket, and white embroidered EV logo on the front.Features Exterior: 300 x 600 Poly; black Lining: 1509 fleece with K 319 foam Binding: PP (Polypropylene) Highly durable padded protective cover
RM494.00
-
EV Electro-Voice ZLX-15 G2 1000W 15" Passive Speaker With Speaker Stand- Pair (ZLX 15 ZLX15)
SPECIFICATIONS ZLX-15P-G2 Frequency response (-3 dB) (Hz) 1 48 Hz – 18,000 Hz Frequency range (-10 dB) (Hz) 1,2 42 Hz – 20,000 Hz Maximum sound pressure level at a distance of 1 m (dB) 3 129 dB Coverage angle HxV (°) 90° x 60° Crossover frequency (kHz) 1.40 kHz Power rating (W) 1000 W Power consumption (V, Hz) 4 100 - 240 V~, 50 - 60 Hz LF transducer WECA2158 LF transducer size (in) 15 in LF transducer magnet material Ferrite HF transducer DECA2516 HF transducer type Compression driver HF transducer size (in) 1.40 in HF transducer magnet material Ferrite HF transducer diaphragm material Titanium Connector type (2) XLR/TRS combo, (1) 1/4-inch TS Hi-Z Material Polypropylene Grille material Powder coated steel Dimensions (H x W x D) (mm) 697.6 mm x 422.8 mm x 383.1 mm Dimensions (H x W x D) (in) 27.46 in x 16.65 in x 15.08 in Shipping dimensions (H x W x D) (mm) 765 mm x 490 mm x 490 mm Shipping dimensions (H x W x D) (in) 30.12 in x 19.29 in x 19.29 in Weight (kg) 16.78 kg Weight (lb) 37 lb Shipping weight (kg) 19.64 kg Shipping weight (lb) 43.30 lb
RM4,800.00
-
EV Electro-Voice ZLX-15P G2 1000W 15" Powered Loudspeaker With Speaker Stand And Cable - Pair (ZLX 15P ZLX15P)
SPECIFICATIONS ZLX-15P-G2 Frequency response (-3 dB) (Hz) 1 48 Hz – 18,000 Hz Frequency range (-10 dB) (Hz) 1,2 42 Hz – 20,000 Hz Maximum sound pressure level at a distance of 1 m (dB) 3 129 dB Coverage angle HxV (°) 90° x 60° Crossover frequency (kHz) 1.40 kHz Power rating (W) 1000 W Power consumption (V, Hz) 4 100 - 240 V~, 50 - 60 Hz LF transducer WECA2158 LF transducer size (in) 15 in LF transducer magnet material Ferrite HF transducer DECA2516 HF transducer type Compression driver HF transducer size (in) 1.40 in HF transducer magnet material Ferrite HF transducer diaphragm material Titanium Connector type (2) XLR/TRS combo, (1) 1/4-inch TS Hi-Z Material Polypropylene Grille material Powder coated steel Dimensions (H x W x D) (mm) 697.6 mm x 422.8 mm x 383.1 mm Dimensions (H x W x D) (in) 27.46 in x 16.65 in x 15.08 in Shipping dimensions (H x W x D) (mm) 765 mm x 490 mm x 490 mm Shipping dimensions (H x W x D) (in) 30.12 in x 19.29 in x 19.29 in Weight (kg) 16.78 kg Weight (lb) 37 lb Shipping weight (kg) 19.64 kg Shipping weight (lb) 43.30 lb
RM5,560.00
-
EV Electro-Voice ZLX-12P G2 1000W 12" Speaker Bluetooth w/Speaker Stand And Cable- Pair (ZLX12P ZLX 12P)
SPECIFICATIONS ZLX-12-G2 Frequency response (-3 dB) (Hz) 1 69 Hz – 18,500 Hz Frequency range (-10 dB) (Hz) 1 55 Hz – 20,000 Hz Axial sensitivity (dB SPL 1W/1m) 93 dB SPL 1W/1m Maximum sound pressure level at a distance of 1 m (dB) 1 125 dB High pass frequency (Hz) 48 Hz Crossover frequency (kHz) 2 kHz Coverage angle HxV (°) 90° x 60° Power handling (continuous) (W) 250 W Power handling (peak) (W) 1,000 W Nominal impedance (Ω) 8 Ω LF transducer WECA2128 LF transducer size (in) 12 in LF transducer magnet material Ferrite HF transducer DH-1K HF transducer type Compression driver HF transducer size (in) 1.4 in HF transducer diaphragm material Titanium Dimensions (H x W x D) (mm) 621.1 mm x 356.2 mm x 356 mm Dimensions (H x W x D) (in) 24.45 in x 14.02 in x 14.01 in Shipping dimensions (H x W x D) (mm) 670 mm x 420 mm x 405 mm Shipping dimensions (H x W x D) (in) 26.38 in x 16.54 in x 15.94 in Weight (kg) 14.26 kg Weight (lb) 31.44 lb Shipping weight (kg) 16.26 kg Shipping weight (lb) 35.85 lb
RM4,980.00
-
Electro-Voice RE320 Cardioid Dynamic Broadcast Microphone ( RE-320 / RE320 )
FEATURES Maximum versatility for broadcasting, podcasting, and music production Variable-D proximity control minimizes positional and off-axis tonal shifts Integrated humbucking coil and integral pop filters provide virtually noiseless performance Unique dual-voicing switch selects from two response curves: General purpose curve for voice and instrument production Kick drum curve for bass drums and some voices SPECIFICATIONS Generating Element : Dynamic N/Dym Magnet Structure Frequency Response : 30 Hz - 18,000 Hz (kick curve) 45 Hz - 18,000 Hz (general curve) Polar Pattern : Cardioid Impedance : 150 ohms balanced Sensitivity, Open Circuit Voltage, 1 kHz : 2.5 mV/pascal Hum Pickup Level, typical (60 Hz/1 millioersted field) : -130 dBm Polarity : Pin 2 will be positive referenced to Pin 3 with positive pressure on diaphragm Case Material : Steel Dimensions : Length = 216.7 mm (8.53 in) Widest Diameter = 54.4 mm (2.14 in) Body Diameter = 49.2 mm (1.94 in) Finish : Semi-Gloss Black Net Weight : 681 g (1 lb, 8 oz) Shipping Weight : 1503 g (3 lb, 5 oz) Accessories Furnished : 81715 stand clamp Optional Accessories : WSPL-2 Foam Wind Screen 309A Isolation Mount Dimension Packaging Weight : 1.2 kg
RM2,996.00
-
EV Electro-Voice ZLX-12 G2 1000W 12" Passive Speaker With Speaker Stand- Pair (ZLX12 ZLX 12)
ZLX-12-G2 Frequency response (-3 dB) (Hz) 1 69 Hz – 18,500 Hz Frequency range (-10 dB) (Hz) 1 55 Hz – 20,000 Hz Axial sensitivity (dB SPL 1W/1m) 93 dB SPL 1W/1m Maximum sound pressure level at a distance of 1 m (dB) 1 125 dB High pass frequency (Hz) 48 Hz Crossover frequency (kHz) 2 kHz Coverage angle HxV (°) 90° x 60° Power handling (continuous) (W) 250 W Power handling (peak) (W) 1,000 W Nominal impedance (Ω) 8 Ω LF transducer WECA2128 LF transducer size (in) 12 in LF transducer magnet material Ferrite HF transducer DH-1K HF transducer type Compression driver HF transducer size (in) 1.4 in HF transducer diaphragm material Titanium Dimensions (H x W x D) (mm) 621.1 mm x 356.2 mm x 356 mm Dimensions (H x W x D) (in) 24.45 in x 14.02 in x 14.01 in Shipping dimensions (H x W x D) (mm) 670 mm x 420 mm x 405 mm Shipping dimensions (H x W x D) (in) 26.38 in x 16.54 in x 15.94 in Weight (kg) 14.26 kg Weight (lb) 31.44 lb Shipping weight (kg) 16.26 kg Shipping weight (lb) 35.85 lb
RM3,900.00
-
Electro-Voice R300-E Headworn Wireless Microphone System ( R300E / R300 E )
The Electro-Voice R300-E Headworn Wireless Microphone System is a cost-effective microphone system well suited for instructors, singers, houses-of-worship, audio for video, DJs and other applications. The R300-E includes the R300 true-antenna diversity receiver, BP300 bodypack transmitter and HM3 headworn microphone. The system features 32 user selectable frequency channels and diversity reception for minimizing RF interference.The ClearScan feature provides single-touch frequency scanning for effortless searches of ideal operating frequencies. Easily keep the transmitter and receiver in sync with the EZsync infrared channel transfer feature. The R300 receiver features 1/4" phone and XLR outputs on the rear and the BP300 bodypack operates for up to 14 hours on a pair of AA alkaline batteries.Designed for club sound, performance & sports venues, and other applicationsClearScan - find the clearest channel available with the touch of one buttonEZsync - infrared channel transfer from receiver to transmitter for easy and error-free setup14 hour battery life from two AA alkaline batteriesRugged metal transmitters with backlit LCD display and battery gauge32 preset channels, with compatible groups of 8 channels for simultanious useBodypack with TA4 connector - compatible with all Electro-Voice lapel and head-worn microphones for easy upgradesDetachable half-wave receiver TNC antennas allow for use with the APD4+ antenna distribution systemMetal receiver chassis with optional rack mount ears and front mount antenna cablesHM-3 Omnidirectional headworn for clear, constant vocals
RM2,887.00
-
Electro-Voice RE20 Dynamic Broadcast Microphone with Variable-D - Black ( RE-20 / RE 20 )
FEATURES The top industry-standard broadcast microphone for decades Variable-D technology minimizes proximity effect for smooth and consistent sound Finely-engineered cardioid polar pattern provides 180º of off-axis rejection, with no coloration Voice tailored frequency response brings out rich fundamental and chest voice Large diaphragm delivers condenser-like sensitivity and response Humbucking coil further reduces noise from poor grounding Bass rolloff switch makes it easy to rein in low frequencies SPECIFICATIONS Microphone Type: Dynamic Polar Pattern: Cardioid Frequency Response: 45Hz-18kHz Output Impedance: 150 ohms Color: Silver Connector: XLR Dimensions: 8.53" x 2.14" Weight: 1.62 lbs. Dimension Packaging Weight : 1.2 kg
RM5,673.00
-
Electro-Voice EVOLVE-WMK-NW White NL4 Mount Kit ( EVOLVE WMK NW / EVOLVEWMKNW )
The EVOLVE-WMK is used to suspend EVOLVE 30M , EVOLVE 50 and EVOLVE 50M column speakers remotely from the subwoofer and without the distance pole. Electro-Voice strongly recommends that loudspeakers be suspended taking into account all current national, federal, state and local laws and regulations. Suspending any object is potentially dangerous. Only individuals who have thorough knowledge of the techniques and regulations of suspending objects overhead should attempt to suspend loudspeakers. The wall mount kit is available in both black and white colors to match the EVOLVE columns speaker system and the venue.The Electro-Voice EVOLVE Wall Mount Kit provides users the flexibility to mount the EVOLVE column speaker remotely from the subwoofer and without the distance pole. This provides a safe method for mounting the column speakers higher than the distance pole allows and remote locating the subwoofer for aesthetic or acoustic purposes. Electro-Voice EVOLVE-WMK-NW White NL4 Wall Mount Features: Innovative mounting system for quick, simple, and reliable installations of EVOLVE column speakers. Sturdy wall mount bracket with 15° of downward tilt, and 45° of left and right adjustment. Subwoofer and column adapters with NL4 connections. Compatible with EVOLVE 30M , EVOLVE 50 and EVOLVE 50M column speakers. Suggested to use correctly rated speaker cable for installation: wire gauges 1.5 mm2 - 2.5 mm2.
RM1.00
-
Electro-Voice R300-L Lapel System with ULM18 Directional Microphone ( R300L / R300 L )
The R300-L is a robust UHF wireless bodypack system, suitable for any application where the convenience of a wireless lavalier microphone is required. The system's BP-300 rugged metal bodypack transmitter is simple to use, and is powered by two AA batteries. Included with the system, the ULM18 is a high quality directional (cardioid) condenser lavalier microphone suitable for sound reinforcement or recording of voice, and allows users the convenience of a hands-free presentation or performance experience. Exceptionally useful for sound reinforcement applications, the ULM18's directional cardioid polar pattern reduces sound system feedback potential when used properly. The receiver's dual antenna diversity helps avoid signal dropouts, and its durable metal frame and chassis can either be used on a tabletop, or rack-mounted with optional rack mounting hardware. DI Part NumberUV-R300LCBrand NameElectro-VoiceManufacturerThe Bosch GroupManufacturer Part NumberR300-L-CProduct ModelR300-LProduct NameLapel System - ULM18 Directional MicrophoneProduct TypeWireless Microphone System
RM2,749.00
-
Electro-Voice R300-HD Wireless Handheld Microphone System ( R300HD / R300 HD )
Key Features For Presenters and Performers HT300 Cardioid Mic/Transmitter with Mute Single-Channel Tabletop Receiver 32 Auto-Scan Frequencies Electro-Voice R300-HD is a cost-effective, all-metal handheld wireless microphone system well suited for tabletop use, or as part of an AV installation, in small- to medium-sized conference centers, educational facilities, and performance spaces.
RM2,749.00
-
EV Electro-Voice ELX200-12SP 1200W 12" Powered Subwoofer ( ELX200 12SP / ELX20012SP )
FEATURES 12" woofer cranks out plenty of low-end punch Lightweight, easy-carry sub with next-level features for optimal performance 1200W Class D amplification is extra-efficient and reduces distortion for cleaner audio QuickSmartDSP offers best-in-class signal processing power with single-knob control LCD menu access to sophisticated signal shaping, four factory presets, and five user presets QuickSmartMobile app for simultaneous out-front configuration of up to 6 ELX200 speakers SPECIFICATIONS Powered/Unpowered:Powered LF Driver Size:12" EVS-12L woofer Power Rating:1200W Inputs:2 x XLR-1/4" combo Outputs:2 x XLR (thru) Frequency Range:41Hz-165Hz (-10dB) Frequency Response:49Hz-135Hz (-3dB) Crossover Frequency:Low Pass 80Hz, 100Hz, 120Hz, 150Hz Maximum Peak SPL:129 dB SPL Signal Processing:QuickSmart DSP, QuickSmart Mobile app Wireless :Bluetooth Mounting Options:M20 Pole Mount Plate Enclosure Material:15mm Plywood with EVCoat Height:15.63" Width:17.52" Depth:17.99" Weight:42.11 lbs. Dimension Packaging Weight : 24.0 kg
RM1.00
-
EV Electro-Voice ELX200-12P 1200W 12" Powered Speaker With Speaker Stand And Cable - Pair (ELX20012P ELX200 12P)
FEATURES 12" woofer and high-performance tweeter for balanced low-end punch and high-end clarity Lightweight, easy-carry loudspeaker with next-level features for optimal performance Class D amplification is extra-efficient and reduces distortion for cleaner audio QuickSmartDSP offers best-in-class signal processing power with single-knob control Efficient LCD menu access to four factory presets (Music, Live, Speech, and Club) Five user-programmable presets let you dial in perfect sound for every venue or room QuickSmartMobile app for simultaneous out-front configuration of up to 6 ELX200 speakers SST optimizes transducer time-alignment for enhanced acoustic quality Integrated M10 suspension points for flying your speaker SPECIFICATIONS Powered:Yes LF Driver Size:12" EVS-12M HF Driver Size:1" DH-1C Titanium Compression Driver Total Power:1200W Class D Inputs:2 x XLR-1/4 combo, 1 x Dual RCA Stereo Outputs:1 x XLR (thru) Bluetooth:Yes Frequency Range:51Hz-20kHz (-10dB) Frequency Response:57Hz-16kHz (-3dB) Crossover Frequency:1700Hz Maximum Peak SPL:130 dB SPL Horizontal Coverage Angle:90 Degrees Vertical Coverage Angle:60 Degrees Signal Processing:QuickSmart DSP Software:QuickSmart Mobile app Enclosure Material:Polypropylene Composite Mounting Options:Pole Mount, Floor Wedge, 3 x M10 Fly Points Power Source:Standard IEC AC cable Height:24.76" Width:14.29" Depth:13.54" Weight:34.39 lbs. Dimension Packaging Weight : 27.6 kg
RM0.01
-
EV Electro-Voice ELX118P 700W 18" Powered Subwoofer ( ELX-118P / ELX 118P )
FEATURES 700-watt powered subwoofer with 18" low-frequency driver 32Hz-130kHz frequency range and 134dB maximum SPL deliver extended bass and room-filling volume XLR/TRS combo input accommodates just about anything Links effortlessly with another subwoofer or speaker Lightweight Class D amplifier runs cool without fans Integrated pole mount for easy speaker installation Light weight and built-in handles for easy transportation Rugged, road-ready construction SPECIFICATIONS Powered/Unpowered:Powered LF Driver Size:1 x 18" EVS-18K subwoofer Total Power:700W Class D Inputs:1 x XLR-1/4" combo Outputs:1 x XLR Frequency Response:42Hz-100Hz (-3 dB), 32Hz-130Hz (-10 dB) Crossover Frequency:100Hz Maximum Peak SPL:134 dB SPL Mounting Options:Floor Power Source:Standard IEC AC cable Enclosure Material:9-ply 15mm plywood with textured paint and 18 gauge steel grille Height:26" Width:19.9" Depth:22.6" Weight:69 lbs. Dimension Packaging Weight : 38.4 kg
RM6,118.00
-
Electro-Voice ELX118-CVR Padded Cover for ELX118SP ( ELX118 CVR / ELX118CVR )
You're loving your Electro-Voice ELX-118 subwoofers — and why not? With their broad frequency response ranges, clean, powerful audio, and stellar build quality, ELX series PA speakers are leaders in their class. So protect each ELX-118 sub with a padded cover that proudly features the EV logo and staunchly guards against dings, dents, scrapes, and scuffs. The Electro-Voice ELX-118 Subwoofer Cover is made with tough, durable nylon to help prevent damage from liquids or dust, too. Sweetwater live sound gurus will tell you: great sound starts with protecting your gear! Electro-Voice ELX-118 Subwoofer Cover Features: Tough, long-wearing nylon shell defends against liquid spills and dust/dirt Interior padding helps prevent damage from minor impacts EV logo prominently displayed on every cover Made to exacting EV standards for superior fit and finish
RM428.00
-
EV Electro-Voice ELX200-10P 1200W 10" Powered Speaker With Speaker Stand And Cable - Pair ( ELX200 10P / ELX20010P )
FEATURES Lightweight, easy-carry loudspeaker with next-level features for optimal performance Class D amplification is extra-efficient and reduces distortion for cleaner audio QuickSmartDSP offers best-in-class signal processing power with single-knob control Efficient LCD menu access to four factory presets (Music, Live, Speech, and Club) Five user-programmable presets let you dial in perfect sound for every venue or room QuickSmartMobile app for simultaneous out-front configuration of up to 6 ELX200 speakers SST optimizes transducer time-alignment for enhanced acoustic quality Integrated M10 suspension points for flying your speaker SPECIFICATIONS Powered:Yes LF Driver Size:10" EVS-10M HF Driver Size:1" DH-1C Titanium Compression Driver Total Power:1200W Class D Inputs:2 x XLR-1/4 combo, 1 x Dual RCA Stereo Outputs:1 x XLR (thru) Bluetooth:Yes Frequency Range:53Hz-20kHz (-10dB) Frequency Response:59Hz-18kHz (-3dB) Crossover Frequency:1800Hz Maximum Peak SPL:130 dB SPL Horizontal Coverage Angle:90 Degrees Vertical Coverage Angle:60 Degrees Signal Processing:QuickSmart DSP Software:QuickSmart Mobile app Enclosure Material:Polypropylene Composite Mounting Options:Pole Mount, Floor Wedge, 3 x M10 Fly Points Power Source:Standard IEC AC cable Height:20.91" Width:12.9" Depth:12.56" Weight:29.7 lbs. Dimension Packaging Weight : 26.4 kg
RM0.01
-
EV Electro-Voice ELX200-10 1200W 10" Passive Speaker With Speaker Stand And Cable - Pair ( ELX200 10 / ELX20010 )
FEATURES 10" woofer and high-performance tweeter for excellent low-end punch and high-end clarity Lightweight, easy-to-carry passive speaker engineered for optimal performance Works great as a stage monitor in tight performance spaces 3-handle design makes load-in and -out easier and helps prevent injuries SPECIFICATIONS Powered:No LF Driver Size:1 x 10" EVS-10M woofer HF Driver Size:1" DH-1C titanium compression driver Power Rating:300W Continuous Total Power:1200W Peak Impedance:8 ohms Inputs:2 x speakON (NL4) Frequency Range:49Hz-22kHz (-10 dB) Frequency Response:65Hz-20kHz (-3 dB) Crossover Frequency:2000 Hz Maximum Peak SPL:127 dB SPL @ 1m Horizontal Coverage Angle:90 Degrees Vertical Coverage Angle:60 Degrees Enclosure Material:Polypropylene Composite Mounting Options:Pole Mount, Floor Wedge, 3 x M10 Fly Points Height:20.91" Width:12.99" Depth:12.56" Weight:29.76 lbs. Dimension Packaging Weight : 27.0 kg
RM0.01
-
EV Electro-Voice ELX118 1600W 18" Passive Subwoofer ( ELX 118 / ELX-118 )
FEATURES Electro-Voice-engineered 18" woofer provide exceptional audio quality Outstanding crossover performance Lightweight materials, balanced design, and ergonomic handles for convenient transport, set up, and load out Stylish-yet-rugged 15mm plywood construction with textured finish says serious gear on any stage Easy to connect and control with versatile input and output options SPECIFICATIONS Freq. Response (-3dB): 50Hz-100Hz Freq. Range (-10dB): 35Hz-200Hz Axial Sensitivity: 96dB Max. Measured SPL: 134dB Recommended HP Freq.: 30Hz Coverage (Horiz. x Vert.): Omnidirectional Power Handling: 400W Continuous, 1600W Peak LF Transducer(s): (1) EVS-18K, 457mm (18") Woofer HF Transducer: N/A Crossover Frequency: N/A Nominal Impedance: 8Î Minimum Impedance: 6.7Î Connectors: Dual NL4 Enclosure Material: 9-ply, 15mm Plywood, Internally Braced, with Textured Paint Grille: 18GA Steel with Black Powdercoat Dimensions (WxHxD): 507mm x 661mm x 574mm (19.98" x 26.02" x 22.60") Net Weight: 31.8kg (70 lb.) Dimension Packaging Weight : 38.4 kg
RM4,079.00
-
Electro-Voice ELX115-CVR Padded Cover for EXL115/P Speakers ( ELX115CVR / ELX115 CVR )
You're loving your Electro-Voice ELX115 PA speakers — and why not? With their broad frequency response ranges, clean, powerful audio, and stellar build quality, ELX series PA speakers are leaders in their class. So protect each ELX115 speaker with a padded cover that proudly features the EV logo and staunchly guards against dings, dents, scrapes, and scuffs. The Electro-Voice ELX115 Cover is made with tough, durable nylon to help prevent damage from liquids or dust, too. Sweetwater live sound gurus will tell you: great sound starts with protecting your gear! Electro-Voice ELX115 PA Speaker Cover Features: Tough, long-wearing nylon shell defends against liquid spills and dust/dirt Interior padding helps prevent damage from minor impacts EV logo prominently displayed on every cover Made to exacting EV standards for superior fit and finish
RM297.00
-
EV Electro-Voice ELX112P 1000W 12" Powered Speaker With Speaker Stand And Cable - Pair ( ELX 112P / ELX-112P )
FEATURES 1,000-watt powered speaker with 12" woofer and 1.5" high-frequency titanium compression driver 50Hz-20kHz frequency range and 132dB maximum SPL deliver immersive sound and room-filling volume Carefully tuned 24dB/octave crossover yields crisp, distortion-free sound 90° x 50° coverage ensures that everyone in your audience experiences top-shelf sound 2-channel mixer with XLR, TRS, and RCA inputs as well as flexible gain, mixing, and processing tools Links effortlessly with another speaker or subwoofer Bypassable highpass filter for easy subwoofer integration Lightweight Class D amplifier runs cool without fans Mount it on a pole, stack it on a subwoofer, or position it onstage for monitoring Light weight and built-in handles for easy transportation Rugged, road-ready construction SPECIFICATIONS Powered:Yes LF Driver Size:1 x 12" EVS-12K HF Driver Size:1.5" Titanium compression driver Total Power:1000W Inputs:2 x XLR-1/4" combo, 2 x RCA Stereo Outputs:1 x XLR (link) Frequency Response:50Hz-20kHz (-10 dB) Crossover Frequency:1.7kHz Maximum Peak SPL:132 dB SPL @ 1m Horizontal Coverage Angle:90 Degrees Vertical Coverage Angle:50 Degrees Enclosure Material:9-ply wood cab with textured paint Mounting Options:Pole Mount, Stacked, Floor Wedge Height:23.89" Width:14.25" Depth:13.38" Weight:37 lbs. Dimension Packaging Weight : 28.8 kg
RM9,686.00
-
EV Electro-Voice ELX115 1600W 15" Passive Speaker With Speaker Stand And Cable - Pair ( ELX-115 / ELX 115 )
SPECIFICATIONS Freq. Response (-3dB): 75Hz-18kHz Freq. Range (-10dB): 50Hz-20kHz Axial Sensitivity: 95dB Max. Measured SPL: 134dB Recommended HP Freq.: 40Hz Coverage (Horiz. x Vert.): 90 x 50 Power Handling: 400W Continuous, 1600W Peak LF Transducer(s): (1) EVS-15K, 381mm (15") Woofer HF Transducer: DH-1K, 39mm (1.5") Titanium Diaphragm Compression Driver Crossover Frequency: 1.7kHz Nominal Impedance: 8Î Minimum Impedance: 7.4Î Connectors: Dual NL4 Enclosure Material: 9-ply, 15mm Plywood, Internally Braced, with Textured Paint Grille: 18GA Steel with Black Powdercoat Dimensions (WxHxD): 432mm x 708mm x 382mm (17.02" x 27.89" x 15.05") Net Weight: 23.0kg (51 lb.) Dimension Packaging Weight : 27.0 kg
RM6,118.00
-
Electro-Voice ELX112-CVR Padded Speaker Cover ( ELX112CVR / ELX112 CVR )
The Electro Voice Live X series is designed for a wide range of mobile sound applications, the live X loudspeakers are housed in stable stackable wooden housings and are available in active and passive versions. The series combines high-quality with a favourable price. With high power, wide frequency range and high sensitivity, Live X loudspeakers are the right choice for all kinds of music. Features Tough, long-wearing nylon shell defends against liquid spills and dust/dirt Interior padding helps prevent damage from minor impacts EV logo prominently displayed on every cover Made to exacting EV standards for superior fit and finish
RM363.00
-
Electro-Voice EVOLVE-WMK-PW White Wall Mount Kit ( EVOLVE WMK PW / EVOLVEWMKPW )
The EVOLVE-WMK is used to suspend EVOLVE 30M , EVOLVE 50 and EVOLVE 50M column speakers remotely from the subwoofer and without the distance pole. Electro-Voice strongly recommends that loudspeakers be suspended taking into account all current national, federal, state and local laws and regulations. Suspending any object is potentially dangerous. Only individuals who have thorough knowledge of the techniques and regulations of suspending objects overhead should attempt to suspend loudspeakers. The wall mount kit is available in both black and white colors to match the EVOLVE columns speaker system and the venue.The Electro-Voice EVOLVE Wall Mount Kit provides users the flexibility to mount the EVOLVE column speaker remotely from the subwoofer and without the distance pole. This provides a safe method for mounting the column speakers higher than the distance pole allows and remote locating the subwoofer for aesthetic or acoustic purposes. Electro-Voice EVOLVE-WMK-PB Black Wall Kit Features: Innovative mounting system for quick, simple, and reliable installations of EVOLVE column speakers. Sturdy wall mount bracket with 15° of downward tilt, and 45° of left and right adjustment. Subwoofer and column adapters with NL4 connections. Compatible with EVOLVE 30M , EVOLVE 50 and EVOLVE 50M column speakers. Suggested to use correctly rated speaker cable for installation: wire gauges 1.5 mm2 - 2.5 mm2.
RM1.00
-
Electro-Voice EVOLVE-WMK-PB Black Wall Mount Kit ( EVOLVE WMK PB / EVOLVEWMKPB )
The EVOLVE-WMK is used to suspend EVOLVE 30M , EVOLVE 50 and EVOLVE 50M column speakers remotely from the subwoofer and without the distance pole. Electro-Voice strongly recommends that loudspeakers be suspended taking into account all current national, federal, state and local laws and regulations. Suspending any object is potentially dangerous. Only individuals who have thorough knowledge of the techniques and regulations of suspending objects overhead should attempt to suspend loudspeakers. The wall mount kit is available in both black and white colors to match the EVOLVE columns speaker system and the venue.The Electro-Voice EVOLVE Wall Mount Kit provides users the flexibility to mount the EVOLVE column speaker remotely from the subwoofer and without the distance pole. This provides a safe method for mounting the column speakers higher than the distance pole allows and remote locating the subwoofer for aesthetic or acoustic purposes. Electro-Voice EVOLVE-WMK-PB Black Wall Kit Features: Innovative mounting system for quick, simple, and reliable installations of EVOLVE column speakers. Sturdy wall mount bracket with 15° of downward tilt, and 45° of left and right adjustment. Subwoofer and column adapters with NL4 connections. Compatible with EVOLVE 30M , EVOLVE 50 and EVOLVE 50M column speakers. Suggested to use correctly rated speaker cable for installation: wire gauges 1.5 mm2 - 2.5 mm2.
RM1.00
-
EV Electro-Voice ELX200-15P 1200W 15" Powered Speaker With Speaker Stand And Cable - Pair (ELX200 15P ELX20015P)
FEATURES 15" woofer and high-performance tweeter for balanced low-end punch and high-end clarity Lightweight, easy-carry loudspeaker with next-level features for optimal performance Class D amplification is extra-efficient and reduces distortion for cleaner audio QuickSmartDSP offers best-in-class signal processing power with single-knob control Efficient LCD menu access to four factory presets (Music, Live, Speech, and Club) Five user-programmable presets let you dial in perfect sound for every venue or room QuickSmartMobile app for simultaneous out-front configuration of up to 6 ELX200 speakers SST optimizes transducer time-alignment for enhanced acoustic quality Integrated M10 suspension points for flying your speaker SPECIFICATIONS Powered:Yes LF Driver Size:15" EVS-15M HF Driver Size:1" DH-1C Titanium Compression Driver Total Power:1200W Class D Inputs:2 x XLR-1/4 combo, 1 x Dual RCA Stereo Outputs:1 x XLR (thru) Bluetooth:Yes Frequency Range:48Hz-19kHz (-10dB) Frequency Response:55Hz-16kHz Crossover Frequency:1600Hz Maximum Peak SPL:132 dB SPL Horizontal Coverage Angle:90 Degrees Vertical Coverage Angle:60 Degrees Signal Processing:QuickSmart DSP Software:QuickSmart Mobile app Enclosure Material:Polypropylene Composite Mounting Options:Pole Mount, Floor Wedge, 3 x M10 Fly Points Power Source:Standard IEC AC cable Height:27.95" Width:16.65" Depth:15.12" Weight:41.67 lbs. Dimension Packaging Weight : 37.2 kg
RM0.01
-
EV Electro-Voice Evolve 30M Powered Column Loudspeaker System - Black / White ( Evolve30M / Evolve 30M )
FEATURES 1,000-watt system packs a big punch Collapsible design allows for compact storage and easy transport Composite waveguides provide spacious coverage for the entire venue Six column-arrayed HF drivers and 10" LF driver deliver impressive power 4 factory presets (Music, Live, Speech, and Club) help you set up for common situations 3-band EQ makes sound shaping simple and easy Built-in Bluetooth connectivity allows you stream music seamlessly for intermission or backing tracks QuickSmart mobile app provides powerful DSP and a variety of professional effects Phantom power enables use with condenser microphones SPECIFICATIONS Powered : Yes Power Configuration : Bi-amped Channels : 8-channel mixer LF Driver Size : 10" woofer HF Driver Size : 6 x 2.8" LF Driver Power Amp : 500W HF Driver Power Amp : 500W Total Power : 1000W Inputs : 4 x XLR-1/4" combo, 2 x XLR-1/4" combo (stereo), 1 x 1/4" TRS (Hi-Z), Dual RCA Stereo, 1 x 1/8" (aux) Outputs : 2 x XLR (mix/aux) Other I/O : 1 x 1/4" (footswitch) Wireless : Bluetooth Frequency Range : 45Hz to 20KHz (-10 dB) Frequency Response : 51Hz-20kHz Crossover Frequency : 200 Hz Maximum Peak SPL : 123 dB SPL @ 1m Horizontal Coverage Angle : 120° Vertical Coverage Angle : 40° Signal Processing : DSP Presets, 7-band Graphic EQ Enclosure Material : 15mm Plywood, Composite column, Aluminum pole Mounting Options : Floor Power Source : Standard IEC AC power cable Height : 17.6" (sub), 24.4" (column) Width : 13" (sub), 3.7" (column) Depth : 17" (sub), 6.2" (column) Weight : 44 lbs. Dimension Packaging Weight : 24.0 kg
RM5,900.00
-
EV Electro-Voice ELX200-18S 1600W 18" Passive Subwoofer ( ELX20018S / ELX200 18S )
FEATURES 18" woofer for excellent low-end punch Lightweight, easy-to-carry sub engineered for optimal performance 2-handle design makes load-in and -out easier and helps prevent injuries SPECIFICATIONS Powered/Unpowered:Unpowered LF Driver Size:1 x 18" EVS-18L woofer Impedance:8 ohms Power Rating:400W Continuous Total Power:1600W Inputs:2 x SpeakON (NL4) Frequency Range:28Hz-300hz (-10 dB) Frequency Response:45Hz-200Hz (-3 dB) Maximum Peak SPL:133 dB SPL @ 1m Mounting Options:M20 Pole Mount Plate Enclosure Material:15mm Plywood with durable polyurea top-coat finish Height:23.7" Width:20" Depth:22.6" Weight:58.7 lbs. Dimension Packaging Weight : 57.6 kg
RM1.00
-
EV Electro-Voice ELX200-18SP 1200W 18" Powered Subwoofer ( ELX200 18SP / ELX20018SP )
FEATURES 18" woofer cranks out massive low-end punch Lightweight, easy-carry sub with next-level features for optimal performance 1200W Class D amplification is extra-efficient and reduces distortion for cleaner audio QuickSmartDSP offers best-in-class signal processing power with single-knob control LCD menu access to sophisticated signal shaping, four factory presets, and five user presets QuickSmartMobile app for simultaneous out-front configuration of up to 6 ELX200 speakers SPECIFICATIONS Powered/Unpowered:Powered LF Driver Size:18" EVS-18L woofer Power Rating:1200W Inputs:2 x XLR-1/4" combo Outputs:2 x XLR (thru) Frequency Range:40Hz-145Hz (-10dB) Frequency Response:47Hz-105Hz (-3dB) Crossover Frequency:Low Pass 80Hz, 100Hz, 120Hz, 150Hz Maximum Peak SPL:132 dB SPL Signal Processing:QuickSmart DSP, QuickSmart Mobile app Wireless :Bluetooth Mounting Options:M20 Pole Mount Plate Enclosure Material:15mm Plywood with EVCoat Height:23.62" Width:19.96" Depth:22.6" Weight:63.93 lbs. Dimension Packaging Weight : 46.8 kg
RM1.00
-
EV Electro-Voice ELX200-12S 1600W 12" Passive Subwoofer ( ELX200 12S / ELX 200 )
FEATURES 12" woofer for excellent low-end punch Lightweight, easy-to-carry sub engineered for optimal performance 2-handle design makes load-in and -out easier and helps prevent injuries SPECIFICATIONS Powered/Unpowered:Unpowered LF Driver Size:1 x 12" EVS-12L woofer Impedance:8 ohms Power Rating:400W Continuous Total Power:1600W Inputs:2 x SpeakON (NL4) Frequency Range:33Hz-300hz (-10 dB) Frequency Response:42Hz-220Hz (-3 dB) Maximum Peak SPL:129 dB SPL @ 1m Mounting Options:M20 Pole Mount Plate Enclosure Material:15mm Plywood with durable polyurea top-coat finish Height:16.7" Width:17.6" Depth:18" Weight:38 lbs. Dimension Packaging Weight : 45.0 kg
RM1.00
-
EV Electro-Voice ELX200-12 1200W 12" Passive Speaker With Speaker Stand And Cable - Pair ( ELX200 12 / ELX20012 )
FEATURES 12" woofer and high-performance tweeter for excellent low-end punch and high-end clarity Lightweight, easy-to-carry passive speaker engineered for optimal performance Works great as a stage monitor in tight performance spaces 3-handle design makes load-in and -out easier and helps prevent injuries SPECIFICATIONS Powered:No LF Driver Size:1 x 12" EVS-12M woofer HF Driver Size:1" DH-1C Titanium Compression Driver Power Rating:300W Continuous Total Power:1200W Peak Impedance:8 ohms Inputs:2 x speakON (NL4) Frequency Range:51Hz-20kHz (-10 dB) Frequency Response:77Hz-17kHz (-3 dB) Crossover Frequency:1700 Hz Maximum Peak SPL:128 dB SPL @ 1m Horizontal Coverage Angle:90 Degrees Vertical Coverage Angle:60 Degrees Enclosure Material:Polypropylene Composite Mounting Options:Pole Mount, Floor Wedge, 3 x M10 Fly Points Height:24.76" Width:14.26" Depth:13.54" Weight:37.7 lbs. Dimension Packaging Weight : 29.4 kg
RM0.01
-
EV Electro-Voice ELX112 1000W 12" Passive Speaker With Speaker Stand And Cable - Pair ( ELX-112 / ELX 112 )
SPECIFICATIONSSpeaker configuration Active/passive: Passive Type: 2-Way full range LF driver: 12" MF driver: Not applicable HF driver: 1.5" Power capacity 8 Ohms program/peak: 250W/1000W 4 Ohms program/peak: Not applicable Audio Frequency response: 82Hz - 18kHz Coverage pattern: 90° x 50° Max SPL: 132 dB Inputs XLR: Not applicable TRS: Not applicable TS: 1 RCA: Not applicable SPEAKON: 1 Output/thru XLR: Not applicable TRS: Not applicable TS: 1 RCA: Not applicable SPEAKON: 1 Enclosure Cabinet material: 15mm plywood Width: 14.25" Height: 23.9" Depth: 13.4" Weight: 35 lb. Dimension Packaging Weight : 21.0 kg
RM5,098.00
-
Electro-Voice 309A Suspension Shock Mount for RE20, RE27N/D and RE320 Microphones ( 309-A / 309 A )
The 309A from Electro-Voice is a professional-quality suspension shock mount. The mount is constructed from metal and has a swiveling basket for precise mic positioning. The mount is designed to support the RE20, RE27N/D and RE320 microphones. Because these mics have internal shock mounts as well, the 309A provides an additional level of protection against unwanted vibrations. Designed specifically for use with the RE20, RE27N/D, and RE320 dynamic microphones Provides near-perfect shock isolation for those already internally shock mounted microphones May be attached directly to the recording boom or to a floor stand for most applications The mount design allows quick installation of the RE20, RE27N/D, or RE320 microphone without tools A double safety factor is provided to ensure microphones will remain attached to the shock mount under any conditions A bayonet locking action assures that the microphone will not fall out of the shock mount under its own weight Additionally, a set screw (wing type) can be tightened to lock the microphone in place after proper positioning
RM1,317.00
-
Sudoku Lexus 10 Pro Electronic Drum Set w/Module And EAD Cymbal w/Bluetooth - Basic Pack ( LEXUS 10PRO LEXUS10PRO )
SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option 'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6
RM6,289.20 - RM9,879.30
-
Sudoku Freedom Gen2 Acoustic Drum Set w/Ghost Cymbals, Throne, Pedal - Drummer Pack
SAME DAY DELIVERY / INSTALLATION SERVICE SELF PICKUP WITHIN KLANG VALLEY / KL AREA- Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option 'Standard Delivery' and all orders will be shipped out on timely manner.*Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A,Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6 Hi-hat stand Snare stand Straight Cymbal Stand Boom Cymbal Stand 14” Hihat Cymbal 16” Crash Cymbal 20” Ride Cymbal 10" Tom 12" Tom 14" Snare 16" Floor Tom 22" Bass Drum 360 Degree Ball Tom Holder
RM3,739.00 RM3,178.15
-
Sudoku Freedom Gen2 Acoustic Drum Set w/Ghost Cymbals, Throne, Pedal - Basic Pack
SAME DAY DELIVERY / INSTALLATION SERVICE SELF PICKUP WITHIN KLANG VALLEY / KL AREA- Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option 'Standard Delivery' and all orders will be shipped out on timely manner.*Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A,Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6 Hi-hat stand Snare stand Straight Cymbal Stand Boom Cymbal Stand 14” Hihat Cymbal 16” Crash Cymbal 20” Ride Cymbal 10" Tom 12" Tom 14" Snare 16" Floor Tom 22" Bass Drum 360 Degree Ball Tom Holder
RM2,988.00 RM2,539.80
