Marshall MS-2 Micro Stack pumps out a ton of pure Marshall tone for its diminutive size. This miniature guitar combo amp is ideal for weekend getaway simpromptu jams and just having fun. One watt may not seem very loud but trust us - this puppy can crank. You get clean and overdrive settingsa tone control a belt clip and your choice of battery or AC power (via an optional adapter). If youe hooked on Marshall tone and can take your full-sized rig with youwe got you covered with the Marshall MS-2 Micro Stack.   FEATURES Classic Marshall styling in a micro-sized amp 1 watt of authentic Marshall tone Clean and overdrive settings Volume and tone controls Headphone jack can also be used to drive an external power amp Belt clip for shredding anytimeanywhere Battery- or AC-powered (with optional power adapter)   SPECIFICATIONS Type:Solid State Number of Channels:1 Power:1W Speakers:1 x Speaker EQ:1-band Inputs:1 x Instrument Outputs:1 x 1/4" TRS (headphones) Height:5.51" Width:4.33" Depth:2.36" Weight:0.75 lbs. Manufacturer Part Number:MS2W

Read more less

 Be prepared to create and experiment in rehearsal to deliver your perfect sound on stage with the 100w JVM410CTM. With four channels, studio quality reverb and two master volumes you are sure to find the tones that best suit your music. These combinations can be stored in the six-channel footswitch, that can be taken around with you and played with any other JVM so you can take your sound wherever you go. FEATURES Programme your favourite sound combinations to this amp using the six-way footswitch to use them with any JVM when on the move Fiercely announce your solo moments using the two master volumes and the 2 x 12” Celestion vintage and Celestion heritage speakers With twelve sound options through four channels and digital reverb, presence and resonance to apply to all of those, you are guaranteed to make a sound for you The FX loop can be blended in to control the amount of external FX without losing any signal quality For those more technical players, the amp can be used with MIDI equipment at any time  SPECIFICATIONS Technology    Valve Channels    4 (Multi) Inputs    1 x 1/4" jack instrument input, MIDI In, Footswitch Output wattage    100w Outputs    Speaker outputs: 5 x 1/4" jack sockets (16? load / 8? load / 4? load), Emulated Line Out (XLR), MIDI Thru Controls    Channel and mode select (button), gain (per channel), treble (per channel), middle (per channel), bass (per channel), volume (per channel), reverb (per channel), presence, resonance, master volume select, master volume (switchable for each channel) Effects    Digital reverb Effects loop    2, 1 x series parallel, 1 x series Speaker configuration    2x12" Speaker model    1 x Celestion Heritage G12H (8?, 80w), 1 x Celestion Vintage (8?, 70w) Unit impedance    16 Preamp valves    4 x ECC83, 1 x ECC83 (phase splitters) Power amp valves    4 x EL34 Accessories    PEDL-91005 footswitch and detachable power cable included Dimensions    690 mm / 27.2" (W) X 510 mm / 20.1" (H) X 265 mm / 10.4" (D) Weight    34.5 kg / 76 lbs

Read more less

 A straightforward 1x12" 2-channel amp that features 3 modes each, making it a total of 6 configuration are your tonal disposal. The JVM215C brings you from Plexi/JTM45 clean all the way to JCM800 searing distortion tones. SPECIFICATIONS Accessories    Footswitch, Power Cable Impedance    8 Ohm Effects    Reverb x2 Effects Loop    Yes x2 EQ    Volume, Gain, Bass, Middle, Treble x2, Reverb x2, Channel Select x2, Presence, Resonance, FX Loop, Footswitch/Programme Inputs    1, with MIDI Model    JVM215C No. of Channels    2 Speaker    1 x 12" Celestion 150w G12B Total Power    50w Tube    4 x ECC83, 1 x ECC83, 2 x EL34 Type    Tube

Read more less

 The British-built 100 Watt JVM210H head offers a more straightforward two channel preamp (Clean/Crunch and Overdrive) than the JVM410H four channels, for guitarists who prefer a more stripped down ?fewer frills? approach. The two independent channels both have three modes. Each mode reconfigures the gain structure of each channel, making six modes in total that can take you from ?Plexi?/JTM45 cleans through JCM800 punch to modern high-gain tones. The JVM210H is equipped with the same groundbreaking technology as its big brother, the JVM410H. Featuring two studio quality Reverbs (one per channel), with individual channel EQ, two Master Volumes, and a memory that will recall your Reverb, FX Loop and Master settings. SPECIFICATIONS Model: JVM210H Type: Tube

Read more less

 This 50-watt tube amp head offers a no-frills two channel with three modes for each; resulting in a combination of 6 sounds at your tonal disposal. It's designed to bring out from Plexi/JTM45 clean to ripping JCM800 distortion tone. SPECIFICATIONS Accessories: Footswitch, Power and Speaker Cables Effects: Reverb x2 EQ: Volume, Gain, Bass, Middle, Treble x2, Reverb x2, Channel Select x2, Presence, Resonance, FX Loop, Footswitch/Programme Inputs: 1, with MIDI Model: JVM205H No. of Channels: 2 Speaker: Yes, x2 Total Power: 50w Tube: 4 x ECC83, 1 x ECC83, 2 x EL34, Type: Tube 

Read more less

 One of the most highly respected Guitar Amp Heads in the Marshall family, this 100-watt beauty is the next step for the acclaimed JCM800, one of the company's first amplifiers to feature a Master Volume control.  This evolution of that landmark model retains the same simple yet effective approach, featuring one channel with no reverb to help please purists who like their sound natural but with plenty of roar.  A tonally transparent Series FX Loop has been added to the 2203, granting instant and immediate transformation into higher, crunchier tones that are perfect for musicians inclined towards the sharp sting of metal. FEATURES Four EL34s in the power stage Three ECC83s in the preamp True bypass series FX loop 3-band EQ Presence control

Read more less

 An exact modern recreation of the HCM900 4100 in the 90s. It's a high gain monster that screams tone, reliability and has become an iconic embodiment of the Marshall sound and quality. It can go from mean clean, to crunch and to all-out searing high gain. SPECIFICATIONS Accessories: Footswitch, Power and Speaker Cables Effects: Reverb Effects Loop: Yes EQ: Presence, Bass, Middle, Treble, Preamp x2, Master x2, Rev x2, Pentode/Triode Switch Inputs: 1 Model: JCM900 4100 No. of Channels: 2 Total Power: 100w Tube: 2 x ECC83, 1 x ECC83, 4 x 5881, Type: Tube

Read more less

 The Silver Jubilee Series was created in 1987 to celebrate the 25th anniversary of the founding of Marshall Amplification and the 50th year of Jim Marshall being in the music business, hence the Silver Jubilee's original '25/50' designation. The limited edition all-valve Silver Jubilee amplifiers looked stunning in silver vinyl covering with chrome-plated control panel.  Based on JCM800 2203 and 2204 Master Volume models, the Jubilee amplifiers were the first Marshall products with Pentode/Triode switching, which halves power output. The Jubilee Series featured an innovative, if somewhat unusual, preamp circuit which had three gain 'modes': 'Clean', Rhythm Clip, and foot-switchable Lead Channel. SPECIFICATIONS Accessories: Footswitch, speaker and power cable EQ: In put Gain (Pull Rhythm Clip), Lead Master, Output Master, Treble, Middle, Bass, Presence, Pentode/Triode Switch Model: 2555X No. of Channels: 2 Outputs: FX Loop, DI Output Total Power: 100w Tube: 3 x ECC83, 4 x EL34 Type: Tube

Read more less

 This compact 140W cabinet is designed with space in mind without losing that classic Marshall look or sound. The two Celestion G12 Vintage speakers deliver a high-end response. The 2536 can be used in mono or stereo mode and matches with the Jubilee series. SPECIFICATIONS Inputs:    2 Power handling:    140W Speaker configuration:    2x12" Speaker model:    2 x Celestion G12 Vintage (16?, 70W) Unit impedance:    8? Mono, 16? Stereo Dimensions:    740 mm / 29.1" W X 305 mm / 12" D X 600 mm / 23.6" H Weight:    24.6 kg / 54 lbs

Read more less

 The JCM25/50 Silver Jubilee Series was produced in 1987 to celebrate 25 years of Marshall Amplification and 50 years of Jim Marshall being in the music business. Inspired by this acclaimed series the 20 Watt Mini Jubilee combo and small box head combine classic Silver Jubilee preamp tone, features and styling in a lower power, 'mini' design. This contemporary 'mini' take on the Jubilee Series features: an ECC83 & EL34 valve-set, High/Low output switching, (20 Watt to 5 Watt), FX Loop and independent 4/8/16 Ohm speaker outputs. In keeping with classic Jubilee tone, Mini Jubilee features preamp circuitry taken from the 2555X which was launched in 2015 and made using the original diagrams. The amp also features classic silver vinyl and chrome plated panelling to complete the Jubilee look. The 2525 Mini Jubilee is expertly crafted and is designed, engineered and constructed to the highest possible standards at the Marshall factory in Bletchley, England.

Read more less

 The JCM25/50 Silver Jubilee Series was produced in 1987 to celebrate 25 years of Marshall Amplification and 50 years of Jim Marshall being in the music business. Inspired by this acclaimed series the 20 Watt Mini Jubilee combo and small box head combine classic Silver Jubilee preamp tone, features and styling in a lower power, 'mini' design. This contemporary 'mini' take on the Jubilee Series features: an ECC83 & EL34 valve-set, High/Low output switching, (20 Watt to 5 Watt), FX Loop and independent 4/8/16 Ohm speaker outputs. In keeping with classic Jubilee tone, Mini Jubilee features preamp circuitry taken from the 2555X which was launched in 2015 and made using the original diagrams. The amp also features classic silver vinyl and chrome plated panelling to complete the Jubilee look. The 2525 Mini Jubilee is expertly crafted and is designed, engineered and constructed to the highest possible standards at the Marshall factory in Bletchley, England. 

Read more less

 The JCM25/50 Silver Jubilee Series was produced in 1987 to celebrate 25 years of Marshall Amplification and 50 years of Jim Marshall being in the music business. Inspired by this acclaimed series the 20 Watt Mini Jubilee combo and 'small box' head combine classic Silver Jubilee preamp tone, features and styling in a lower power, 'mini' design. This contemporary 'mini' take on the Jubilee Series features an ECC83 & EL34 valve-set, High/Low output switching, (20 Watt to 5 Watt), FX Loop and independent 4/8/16 Ohm speaker outputs. The 2525C combo is loaded with a single 12_ Celestion G12M Greenback speaker. In keeping with classic Jubilee tone, Mini Jubilee features preamp circuitry taken from the 2555X which was launched in 2015 and made using the original diagrams. The amp also features classic silver vinyl and chrome plated panelling to complete the Jubilee look. The 2525 Mini Jubilee is expertly crafted and is designed, engineered and constructed to the highest possible standards at the Marshall factory in Bletchley, England. 

Read more less

 This 50w reissue plexi has been lovingly crafted to replicate the 70’s tone and aesthetics of the original. Its unique tonal characteristics are what defined this all-valve amp and they have not changed in this reissue. The 1987XTM delivers the perfect balance of classic Marshall overdrive and glistening clean tones. An additional FX loop gives a modern twist to the amp. SPECIFICATIONS Technology: Valve Channels: 2 (Split), non-master volume Output wattage: 50w Outputs: 2 x 1/4" jack speaker outputs, selectable 16?/ 8? / 4? load Inputs: 4 (2 x high, 2 x low) "Lead and Bass" Controls: Presence, bass, middle, treble, high treble/loudness I, normal/loudness II Effects loop: Yes, Send/Return Preamp valves: 2 x ECC83, 1 x ECC83 (phase splitter) Power amp valves: 2 x EL34 Accessories: Detachable power cable included, speaker cable included Weight: 15.3 kg / 34 lbs Dimensions (Width X Height X Depth): 660 mm X 260 mm X 205 mm / 26" X 10.2" X 8.1"

Read more less

 A faithful recreation of the 1974 18-watt dual channel. It is thoroughly and meticulously hand soldered with classic English design, built in tube Tremolo circuit and interactive EQ controls.  The cleans are rich with articulation and sensitivity. The specially designed Celestion G12M-20 Greenback has been masterfully 'aged' to get that vintage vibe going. SPECIFICATIONS Accessories: Footswitch and Power cable Impedance: 15 Ohm Effects: Tremolo Effects Loop: No EQ: Tone & Vol x2, Speed, Intensity Inputs: 2 x 2 Model: 1974X No. of Channels: 2 Speaker: 1 x 12" Celestion G12M-20 Total Power: 18W Tube: 2 x ECC83, 1 x ECC83, 2 x EL84, 1 x EZ81 Type: Tube

Read more less

 Designed to perfectly match with the 1974X combo, giving it an added flexibility of running a 2x12" configuration; resulting in larger soundstage and even more ideal for stage usage. SPECIFICATIONS Impedance: 15 Ohm Cab Mono/Stereo: Mono Inputs: 1 Model: 1974CX Speaker: 1x12" Celestion G12M-20 Total Power: 20W

Read more less

 1973x, another faithful British-made recreation of the 1973 2-channel 2x12" tube combo amp. The design is straightforward but packed with incredible tone; rich overtones and responsive to playing nuances.  Ideal for both studio and live sound, staying true to the Marshall tone heritage. SPECIFICATIONS Accessories:    Footswitch, Power Cable Impedance:    15 Ohm Effects:    Tremolo EQ:    Tone & Vol x2, Speed, Intensity Inputs:    2x2 Model:    1973X No. of Channels:    2 Speaker:    2 x 12" Celestion G12M-20 Total Power:    18w Tube:    2 x ECC83, 1 x ECC83, 2 x EL84, 1 x EZ81 Type:    Tube 

Read more less

 The 1962HW is all hand-wired, British recreation of the iconic 30-watt amp, once famously used by Eric Clapton during his John Mayall days (hint the 'Bluesbreaker' nickname).  The sustain and clean in this amp is incredible with articulation and sweet compression. The only reissue closest to the original! SPECIFICATIONS Range    Handwired Technology    Valve Channels    2 (Multi) "Lead and Bass" non-master volume Output wattage    30w Outputs    2 x 1/4" jack speaker outputs, selectable 16? / 8? / 4? load Inputs    4 (2 x high & 2 x low inputs) Controls    Tremolo Speed, Tremolo Intensity, Presence, Bass, Middle, Treble, Volume I, Volume II Effects    Tremolo Effects loop    No Speaker configuration    2x12" Speaker model    Celestion G12-C (25W, 16?) Unit impedance    8? Preamp valves    3 x ECC83, 1 x ECC83 (phase splitter) Power amp valves    2 x KT66 Rectifier    1 x GZ34 Footswitch    PEDL-00056 included Cable    Detachable power cable included, Speaker cable included Dimensions    815 mm / 32.1" W X 625 mm / 24.6" H X 270 mm / 10.6" D Weight    33.4 kg / 74 lbs

Read more less

 The impressive 280w 1960 vintage cabinets are a combination of the enclosure of the 1960 and the vintage aural characteristics of a 1982. It features four Celestion G12 Vintage speakers that give a warmer tone than its predecessor. This powerhouse offers it all from a well rounded high-end punch to a low-end thump. Stunning look – this cabinet is truly dazzling in silver vinyl and vintage fittings and will compliment your other Silver Jubilee reissue products. Great tone – four Celestion G12 speakers deliver an ultra-focused sound reminiscent of the late-1980s. SPECIFICATIONS Inputs: 2 Speaker configuration: 4x12" Speaker model: Celestion G12-Vintage speakers (16?, 70w) Unit impedance: 16/4? Mono, 8? Stereo Weight: 41 kg / 90.4 Ibs Dimensions (Width X Depth X Height): 770 mm X 365 mm X 755 mm / 30.3" X 14.4" X 29.7" 

Read more less

 The famed Marshall 1962 Bluesbreaker got its name from the days of Eric Clapton, whom used it with the John Mayall's Bluesbreakers.  It has a unique clean sustain with the right amount of sweet compression. Comes well equipped with tremolo channel and stays true to its vintage heritage. SPECIFICATIONS Accessories: Footswitch, Power Cable Impedance: 16ohm Effects: Tremolo EQ: Presence, Bass, Middle, Treble, Volume 1, Volume 2, Speed, Intensity Inputs: 2 x 2 Model: 1962 " BLUESBREAKER" No. of Channels: 2 Speaker: 2 x 12" Celestion T1221 Greenback Total Power: 30W Tube: 2 x ECC83, 1 x ECC83, 2 x 5881, 1 x GZ34

Read more less

 The impressive 280w 1960 vintage cabinets are a combination of the enclosure of the 1960 and the vintage aural characteristics of a 1982. It features four Celestion G12 Vintage speakers that give a warmer tone than its predecessor. This powerhouse offers it all from a well rounded high end punch to a low end thump. Stunning look – this cabinet is truly dazzling in silver vinyl and vintage fittings and will compliment your other Silver Jubilee reissue products. Great tone – four Celestion G12 speakers deliver an ultra-focused sound reminiscent of the late-1980s. SPECIFICATIONS Inputs: 2 Speaker configuration: 4x12" Speaker model: Celestion G12-Vintage speakers (16?, 70w) Unit impedance: 16/4? Mono, 8? Stereo Weight: 40.6 kg / 89.5 lbs Dimensions (Width X Depth X Height): 770 mm X 365 mm X 755 mm / 30.3" X 14.4" X 29.7" 

Read more less

 Marshall 1959HW 100W Handwired Tube Guitar Amplifier Head The 1959HW is a line right back to the celebrated era of the mid to late 1960s, the original was born when Pete Townshend asked Jim Marshall if he could make it louder. This re-issue delivers that classic Marshall tone with the same overdrive and crunch, using the authentic parts and methods to construct. The louder you play, the better it sounds. SPECIFICATIONS Technology:    Valve Channels:    2 (Split) "Lead and Bass", non-master volume Output wattage:    100w Outputs:    2 x 1/4" jack speaker outputs, selectable 16ohm / 8ohm / 4ohm load Inputs:    4 (2 x high & 2 x low inputs) Controls:    Volume I, volume II, treble, middle, bass, presence Preamp valves:    2 x ECC83, 1 x ECC83 (phase splitter) Power amp valves:    4 x EL34 Accessories:    Detachable power cable supplied Weight:    21.4 kg / 47 lbs Dimensions (Width X Height X Depth):    740 mm X 305 mm X 210 mm / 29.1" X 12" X 8.3"

Read more less

 The 1936V differs from the 1936 only by its speakers; it's loaded with Celestion G12 Vintage speakers. The result is a creamier higher-end response, which sounds slightly warmer than the G12T-75s used in the 1936.  The 1936V can be used in mono or stereo mode, without the need to switch. SPECIFICATIONS Inputs:    2 Speaker configuration:    2x12" Power handling:    140W Speaker model:    2 x Celestion G12 Vintage (16?, 70w) Unit impedance:    8? Mono, 16? Stereo Dimensions:    740 mm / 29.1" W X 600 mm / 23.6" H X 305 mm / 12" D Weight:    24.6 kg / 54 lbs 

Read more less

 The understated 1936 cabinet offers a versatile sound; it can be used in mono or stereo mode without the need to switch, and comes with the Celestion G12T-75 Vintage speakers.  It is perfect as an extension cabinet for combos and supports full-sized heads, and its modest size great for restricted spaces on stage or in the studio. SPECIFICATIONS Inputs:    2 Speaker Configuration:    2x12" Power Handling:    150w Speaker Model:    Celestion G12T-75 (16ohm, 75w) Unit Impedance:    8ohm Mono, 16ohm Stereo Weight    (kg):  24.6 Dimensions:    Width: (mm) 740 X Height: (mm) 600 XDepth: (mm) 305 

Read more less

 The perfect extension cabinet for 2x12 combos that’s compact enough for life on the move. Don’t be fooled by its smaller size, it definitely delivers the boost you need for larger venues thanks to the two Celestion G12T-75 speakers and 150W of power. FEATURES Wherever you go – this cabinet is powerful but lightweight with full-size carry handles for easy transport. Sensational tones – this is a cabinet with plenty of attack, designed to cope with high gain amps. The Celestion speakers are great for softening distortion and overdrive. Versatile sound – not only can this cabinet offer amazing volume but it can also be configured in mono or stereo.  SPECIFICATIONS  Inputs: 2 Speaker configuration: 2x12" Power handling: 150W Speaker model: Celestion G12T-75 (16?, 75W) Unit impedance: 8? Mono, 16? Stereo Weight: 19 kg / 42 lbs Width: 675 mm / 26.6" Height: 515 mm / 20.3" Depth: 260 mm / 10.2"

Read more less

 This 20W combo is designed for those that like expression through innovation. Using a Celestion V type speaker the Origin20CTM provides a classic all-valve Marshall tone.  A 2-way footswitch allows you to control the gain boost and turn the FX loop on and off. With classic styling and modern features this amp generates rich, harmonic tones so that you can craft a sound to suit your personality.   FEATURES Packed with 3 ECC83 preamp tubes and 2 EL34 power tubes 10" Celestion V-type speaker provides classic British tone Separate Gain and Master controls for dialing in the right amount of crunch Presence knob and 3-band EQ for shaping your tone Unique Tilt control blends bright and normal sounds Switchable Low/Mid/High power enables high-output sounds at any volume TECHNICAL SPECIFICATION GENERAL Model: Origin20C Range: Origin Technology: Valve Channels: 1 ELECTRONICS Output wattage: High power 20W, mid power approx 3W and low power approx 0.5W Outputs: Speaker outputs: 3 x 1/4" jack sockets (16? load / 8? load), DI out (1/4" jack) Inputs: 1 x 1/4" jack instrument input, footswitch Controls: Gain, boost, tilt, bass, middle, treble, master, presence, powerstem Effects: None Effects loop: Yes, Series, Send/Return  SPEAKERS Speaker configuration: 1x10" Speaker model: Celestion V type (16?, 50W) Unit impedance: 16?  VALVES Preamp valves: 3 x ECC83 Power amp valves: 2 x EL34  ACCESSORIES Footswitch: PEDL-90016 included Cable: Detachable power cable included  DIMENSIONS (INCLUDING FEET AND HANDLE) Weight: 13.9 kg / 31 lbs Width: 520 mm / 20.5" Height: 440 mm / 17.3" Depth: 240 mm / 9.4"

Read more less

 Plug your Marshall Origin series amplifier into the ORI412A and prepare to be amazed — the sound of this 4 x 12" angled extension cabinet will blow you away. Experience defined, controlled lows and punchy, aggressive mids thanks to four Celestion Seventy 80 speakers. Benefit from 240 watts of power handling. Beyond that, this extension cabinet’s sleek vintage styling is guaranteed to turn a few heads. Get an ORI412A, and your Origin amplifier will achieve its full potential. FEATURES 240-watt, 4 x 12" angled extension cab Voiced especially for Origin series amplifiers Angled design offers incredible tone and projection Closed-back design delivers tight low-end response 4 Celestion G12E-60 speakers churn out defined, controlled lows and punchy, aggressive mids Sleek vintage styling is guaranteed to turn heads  SPECIFICATIONS Configuration:4 x 12" Speakers:12" Celestion G12E-60 Power Handling:240W Impedance:16 ohms Mono/Stereo:Mono Cabinet Type:Slant Open/Closed Back:Closed Inputs:1 x 1/4" Construction Material:Tolex covered MDF Height:29.5" Width:29.9" Depth:14.1" Weight:68.1 lbs.

Read more less

 Nothing produces that classic "British" sound like a Marshall amplifier, whether it's a combo or head and cab configuration. Nothing compares to Marshall cabinets in terms of awesome tone and projection and they are built to stand the test of time. Studio Vintage cabinets are tailor-made to pair with Studio Vintage amplifiers, both sonically and visually.  Loaded with two 12" Celestion G12 V-Type speakers, which have a balanced tonal signature with a vintage musicality, this cab is teeming with vintage British tone — the perfect complement to the legendary sound of your Studio Vintage. Built to Marshall's legendary construction quality standards, it is the perfect match to the Studio Vintage Amps. SPECIFICATIONS Inputs:    1 Speaker configuration:    2x12" Power handling:    140W Speaker model:    Celestion V-Type (16?, 70W) Unit impedance:    8? Dimensions:    530 mm / 20.9" (W) X 750 mm / 29.5" (H) X 310 mm / 12.2" (D) Weight:    23.85 kg / 52.6 lbs 

Read more less

 Nothing produces that classic "British" sound like a Marshall amplifier, whether it's a combo or head and cab configuration. Nothing compares to Marshall cabinets in terms of awesome tone and projection and they are built to stand the test of time. Studio Vintage cabinets are tailor-made to pair with Studio Vintage amplifiers, both sonically and visually. Loaded with a 12" Celestion G12 V-Type speaker, which have a balanced tonal signature with a vintage musicality, this cab is teeming with vintage British tone — the perfect complement to the legendary sound of your Studio Vintage. Built to Marshall's legendary construction quality standards, it is the perfect match to the Studio Vintage Amps. SPECIFICATIONS Inputs:    1 Speaker configuration:    1x12" Power handling:    70W Speaker model:    Celestion V-Type (16?, 70W) Unit impedance:    16? Dimensions:    500 mm / 19.7" (W) X 480 mm / 18.9" (H) X 245 mm / 9.7" (D) Weight:    12.25 kg / 27.1 lbs 

Read more less

 Nothing produces that classic "British" sound like a Marshall amplifier, whether it's a combo or head and cab configuration. The Studio Vintage is based on the amp that first defined rock ‘n’ roll in the 60s, the famed 1959SLP.Combining the raw power and authentic voice of classic rock into a compact 20W amp, it stays faithful to the original with its Plexi design and all-valve tone.  The SV20H is an all valve handbuilt amp designed and built in the UK, to accurately recreate the classic Marshall tone. From saturated blues tones to biting leads for classic rock, you'll be hard pressed to tell it apart from a 1959SLP. It also has a handy power reduction circuit so you can drop from 20W to 5W and practice with cranked-up tones at low volume at home. SPECIFICATIONS Inputs:    4 (2 x high, 2 x low) "Lead and Bass" Output wattage:    20W (with power reduction option to 5W) Outputs:    5 x 1/4” jack sockets, selectable 16? / 8? / 4? load Controls:    Low/High power mode selection switch, presence, bass, middle, treble, high treble/loudness I, normal/loudness II Effects loop:    Yes, series, send/return Preamp valves:    2 x ECC83, 1 x ECC83 (phase splitter) Power amp valves:    2 x EL34 Accessories:    Detachable power and speaker cables included Dimensions:    500mm / 19.7" (W) X 240mm / 9.4" (H) X 230mm / 9.1" (D) Weight:    9.25kg / 20.4 lbs 

Read more less

 Nothing produces that classic "British" sound like a Marshall amplifier, whether it's a combo or head and cab configuration. The Studio Vintage is based on the amp that first defined rock ‘n’ roll in the 60s, the famed 1959SLP. Combining the raw power and authentic voice of classic rock into a compact 20W amp, it stays faithful to the original with its Plexi design and all-valve tone.  The SV20C is an all valve handbuilt amp designed and built in the UK, to accurately recreate the classic Marshall tone. From saturated blues tones to biting leads for classic rock, you'll be hard pressed to tell it apart from a 1959SLP. It also has a handy power reduction circuit so you can drop from 20W to 5W and practice with cranked-up tones at low volume at home. SPECIFICATIONS Inputs:    4 (2 x high, 2 x low) "Lead and Bass" Output wattage:    20W (with power reduction option to 5W) Outputs:    2 x 1/4" jack speaker, selectable 16? / 8? / 4? load Controls:    Low/High power mode selection switch, presence, bass, middle, treble, high treble/loudness I, normal/loudness II Effects loop:    Yes, series, send/return Speaker configuration:    1x10" Speaker model:    Celestion V-type 10” (16?, 50W) Unit impedance:    16? Preamp valves:    2 x ECC83, 1 x ECC83 (phase splitter) Power amp valves:    2 x EL34 Accessories:    Detachable power cable included Dimensions:    500mm / 19.7" (W) X 460mm / 18.1" (H) X 245mm / 9.6" (D) Weight:    15.9kg / 35 lbs 

Read more less

 Nothing produces that classic "British" sound like a Marshall amplifier, whether it's a combo or head and cab configuration. Nothing compares to Marshall cabinets in terms of awesome tone and projection and they are built to stand the test of time. Studio Classic cabinets are tailor-made to pair with Studio Classic amplifiers, both sonically and visually.  Loaded with two 12" Celestion G12 V-Type speakers, which have a balanced tonal signature with a a vintage musicality, this cab is teeming with classic British tone — the perfect complement to the incendiary sound of your Studio Classic.Smooth ABS plastic corners offer excellent protection for your cab's corners, and Marshall's highest quality woodwork includes finger-jointed plywood construction. SPECIFICATIONS Inputs:    1 Speaker configuration:    2x12" Power handling:    140W Speaker model:    Celestion V-Type (16?, 70W) Unit impedance:    8? Dimensions:    535 mm / 21.1" (W) X 535 mm / 21.1" (H) X 320 mm / 12.6" (D) Weight:    22.70 kg / 50.1 lbs 

Read more less

 The classic rock tone that put British music on the map is back. Designed to be united with the SC20H or used as an extension cabinet for the SC20C, the SC112 brings those timeless overdriven tones to life. Hand manufactured in Britain and housing a Celestion V-Type speaker, the SC112 is equally at home when rehearsing or unleashed on the stage. Authentic JCM800 tone - Recreate those classic Marshall sounds that kicked off the sonic revolutionCompact and convenient - Lightweight and portable for life on the move SPECIFICATIONS  Inputs:    1 Speaker configuration:    1x12" Power handling:    70W Speaker model:    Celestion V-Type (16?, 70W) Unit impedance:    16? Weight:    12.05 kg / 27 lbs Dimensions:    510 mm / 20.1" (W) X 480 mm / 18.9" (H) X 250 mm / 9.9" (D) 

Read more less

 The original JCM800 2203 changed the face of modern amplifiers forever. Updated and enhanced, the Studio Classic SC20H is here to do it all over again.  Replicating their first amp that truly embodied the overdriven sound of heavy rock, Marshall's portable SC20H brings timeless sounds to the modern guitarist, with the option to switch between 20W and 5W at the flick of a button. SPECIFICATIONS Output wattage    20W (with power reduction option to 5W) Outputs    5 x 1/4” jack sockets, selectable 16? / 8? / 4? load Inputs    2 x 1/4" jack instrument inputs (high/low sensitivity) Controls    Presence, bass, middle, treble, master volume, preamp volume Effects    None Effects loop    Yes, series, send/return Preamp valves    2 x ECC83, 1 x ECC83 (phase splitter) Power amp valves    2 x EL34 Accessories    Detachable power cable & speaker cable included Dimensions (including feet and handle)    510mm / 20.1" (W) X 240mm / 9.4" (H) X 240mm / 9.4" (D) Weight    9.4 kg / 20.7 lbs 

Read more less

 The JVM210C is a straightforward 'no-frills' 2-channel amp aims to bring out from Plexi/JTM45 cleans to JCM800 distortion tones. The channels each has 3 modes which offers 6 configurations in total at your tonal disposal. SPECIFICATIONS  Accessories: Footswitch, Power Cable Impedance: 16 Ohm Effects: Reverb x2 Effects Loop: Yes, x2 Model: JVM210C No. of Channels: 2 Speaker: 2 x 12", Celestion Vintage with Celestion Heritage Total Power: 100w Tube: 4 x ECC83, 1 x ECC83, 2 x EL34 Type: Tube 

Read more less

 The British-built, 50 Watt all-valve 2 x 12" JVM205C offers a straightforward two-channel preamp, Clean/Crunch and Overdrive, for guitarists who prefer a more stripped down, "fewer frills" approach. The two independent channels both have three modes. Each mode reconfigures the gain structure of each channel, making six modes in total, which can take you from "Plexi"/JTM45 cleans through JCM800 roar to modern high gain tones. The JVM205C is equipped with the same groundbreaking technology as the JVM410C, featuring two studio quality Reverbs (one per channel), with individual channel EQ, two Master Volumes, and a memory that will recall you Reverb, FX Loop and Master settings. The JVM205C uses Stompware switching technology and comes supplied with a fully programmable, four-button footswitch which connects to the amp using a standard guitar lead, so you're not restricted by stage size - and if your cable fails, it's very easy to replace: Highly intelligent. The JVM205C is loaded with a 12" Vintage 30 speaker and a 12" Heritage speaker, both of which have unique tonal characteristics, and combined give you the best of both sonic worlds. SPECIFICATIONS Impedance    16ohms EQ    Volume/Gain/Bass/Middle/Treble x 2, Reverb x 2, Channel Select x 2, Presence, Resonance, FX Loop, Footswitch/Programme Inputs    1 Model    JVM205C No. of Channels    2 Speaker    1 Celestion Vintage, 1 Celestion Heritage Total Power    50watts Tube    4 x ECC83, 1 x ECC83, 2 x EL34

Read more less