JTS
-
JTS JTS RU-901G3 UHF PLL single channel true diversity receiver ( RU901G3 / RU 901G3 )
RU-901G3 is the 3rd generation true diversity system. It inherits the reliability in electronic circuit design and mechanical design of the legendary US-901. To cope with the development of the technology it features function. It synchronizes a transmitter with data of frequency, gain control, ID and so on by pushing a button. Scan function is also provided. * RU-901G3 is for medium and large venue Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Frequency Setting Remoset U Ultrasonic Receiving Mode True Diversity Bandwidth 36MHz S/N Ratio > 105dB T.H.D <0.6% @ 1KHz Sensitivity -95dBm, S/N>80dB CMRR >80 dB Audio Frequency Response 50Hz~18KHz±2dB Antenna BNC (F) Antenna Bosster Power DC12~15V/100mA Display LCD Display Contents Group, Channel, Frequency, Battery Status, Antenna A/B, AF Meter(LED BAR), RF Meter (LED BAR) Controls Power ON/OFF, Group, Channel, Frequency, Audio Level, Lock-on, Volume, Output Pad, Frequency Scan (ON/OFF) Audio Output Level Ref:±22.5KHz Dev@1KHz Tone?6.3 Phone Jack:-10dBV XLR Jack:-4dBV(Line)?-24dBV(MIC) AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Output Connector Balanced XLR Socket x1 / Unbalanced ?6.3mm PHONE JACK x1 Power Supply DC12~15V/500mA Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region.
RM1,140.00
-
JTS JTS RU-8011D/RU-850TB+CX-504 UHF single channel PLL diversity receiver with Plastic Body-pack transmitter + headworn microphone
Based on US-8001 successful experience, RU-8011 is designed with JTS 2nd generation REMOSET technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The REMOSET technology sends the scanned channel data to transmitter by pushing a button. To meet critical audio demand general noise and hiss noise have been reduced to an extremely low level. 100 meter operation range meets most demand from most applications. To be environment friendly an integrated charger is available on option. This innovative bodypack transmitter is designed with Power/Mute button only. All adjustments and settings are carried out at receiver side and the transmitter will be set by patent pending REMOSET U. The settings include Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver’s front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes. This will save battery life and avoid over discharge. To cope with music instruments a pad of -20 dB is designed in this bodypack transmitter. * Uni-direction for high-quality voice pick-up. * Excellent gain-before-feedback and noise isolation. * Lightweight benefits great freedom and mobility. * Ergonomic design ensures comfortable wearing
RM1,460.00
-
JTS JTS PS-1 Phantom power supply ( PS1 / PS 1 )
48V Phantom Power Supply. Provides constant 48V power for condenser microphones when phantom power is not available on the mixer or for field recording direct to tape, hard disk computer based on DAW. The PS-2 is a dual input version of PS-2 Number of Channels PS-1 : 1 PS-2 : 2 Regulated Output Voltage 48V ±2V DC Short Circuit Output Current 14 mA Signal To Noise Ratio 105 dB Frequency Response 10~22,000 Hz AC Input 110/220V AC, 50-60 Hz, 3W max Input Connector 3-pin XLR Female Output Connector 3-pin XLR Male Dimensions (mm) 143.6mm(W)* 55.9mm(H)* 184.7mm(D)
RM350.00
-
JTS JTS PS-2 Phantom power supply ( Dual input version ) ( PS 2 / PS2 )
48V Phantom Power Supply. Provides constant 48V power for condenser microphones when phantom power is not available on the mixer or for field recording direct to tape, hard disk computer based on DAW. The PS-2 is a dual input version of PS-2 Number of Channels PS-1 : 1 PS-2 : 2 Regulated Output Voltage 48V ±2V DC Short Circuit Output Current 14 mA Signal To Noise Ratio 105 dB Frequency Response 10~22,000 Hz AC Input 110/220V AC, 50-60 Hz, 3W max Input Connector 3-pin XLR Female Output Connector 3-pin XLR Male Dimensions (mm) 143.6mm(W)* 55.9mm(H)* 184.7mm(D)
RM390.00
-
JTS JTS R-4/R-4THA*4 UHF 4 channel diversity system ( 4x Aluminium Handheld transmitter )
The system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation. JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance. Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ±48KHz (Peak) Chassis Plastic (R-4TH) / Aluminium alloy (R-4THA) LCD Display Group, Channel, Frequency, Battery Status, User Name, GAIN Adjust Controls Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18kHz Battery UM3, AA x2 Capsules Module Interchangeable Dimensions 50(W) x 253(H) x 35.5(D) Weight 350g Notes Actual product specifications may vary depending on model and region.
RM7,060.00
-
JTS JTS R-4/R-4TB+CM-501*4 UHF 4 channel diversity system (4x Plastic Body-pack transmitter + lavalier microphone)
The JTS R-4-RACK-4TB is a 19” rack/flight case featuring an R-4 UHF PLL Quad channel diversity wireless receiver, four R-4TBM bodypack transmitters and a 2U rack draw. The receiver features REMOSET which enables the transmitters and receiver to wirelessly sync frequencies in under a second with the push of a button. The antenna outputs and AC can be cascaded to enable multiple receivers to be connected together. This system also features four JTS R-4TBM bodypack transmitters featuring adjustable RF output, aluminium alloy chassis and a large LCD display screen showing low battery and user name. REMOSET ID Pairing is also built into this device for easy pairing with the R-4 receiver. The heavy-duty rack provides protection of the complete system during transit. Please Note. This system is available in two frequency bands: 606.5-638MHz includes Channel 38 and is the most reliable solution for portable wireless microphone systems in the UK and requires a licence (www.ofcom.org.uk). 823-865MHz includes Channel 70 (863-865MHz) which can be operated licence-free in the UK and Europe. Features 19” flight case to store and protect system Integrated storage drawer Suitable as a portable system REMOSET synchronisation Pilot tone and noise mute Integrated antenna distribution 4 Independent XLR outputs and 1 XLR for mixed output Delivery Includes 1 R-4 diversity receiver 4 R-4TBM bodypack transmitters 1 flight case Technical Data R-4 diversity receiver Frequency Preparation: PLL Synthesized Control Carrier Frequency Range: UHF 823-865MHz (CH70 863-865MHz licence free)/ 606.5-642 MHz (CH38 606-614 MHz licence required) S / N Ratio: > 105dB T.H.D: <0.6% @ 1KHz Display Contents: Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED BAR), RF Meter (LED BAR), Battery Status Controls: Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level: -12dB AF Output Impedance: 600? Squelch: Pilot Tone & Noise Mute Operation Voltage: 100 ~ 240V Output Connector: 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output Dimension (WxHxD): 212.3 x 38.3 x 144mm R-4TBM bodypack transmitter Frequency Preparation: PLL Synthesized Control Carrier Frequency Range: UHF 823-865MHz (CH70 863-865MHz licence free)/ 606.5-642 MHz (CH38 606-614 MHz licence required) RF Outputs: Low / High Stability: < ±10KHz Frequency Deviation: ± 48KHz (Peak) Chassis: Aluminium alloy LCD Display: Group, Channel, Frequency, Battery Status, User Name, GAIN Adjust Controls: Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Input Connector: 4P Mini XLR Spurious Emissions: <-50 dBC Audio Frequency Response: 50Hz ~ 18k Hz Battery: UM3, AA x2 Dimensions (WxHxD): 62 x 80.3 x 22.6mm Weight: 93g
RM6,900.00
-
JTS JTS R-4/R-4TH*4 (UHF 4 CHANNEL DIVERSITY SYSTEM-HANDHELD MICROPHONE TRANSMITTER)
The R-4 system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation. JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance. R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation. JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance. Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz S/N Ratio > 105dB T.H.D <0.6% @ 1KHz Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED BAR), RF Meter (LED BAR) , Battery Status Controls Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level -12dB AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Operation Voltage 100 ~ 240V Output Connector 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region.
RM6,950.00
-
JTS JTS R-4/R-4TBM+CM-501 R-4 UHF 4 channel diversity system (4x Metal Body-pack transmitter + lavalier microphone)
Features: * 2400 to 3000 selectable frequencies * Preset 15 groups each of up to 63 compatible channels * Phase-Locked Loop (PLL) synthesized tune * Extended dynamic range and smooth frequency response. * Adjustable transmission power between Low and High * The panel Lock-On function prevents tampering and RF interruption * Together with JTS various music instrument mics, headset mics and tie clip mics this bodypack is versatile for all applications. Specifications: Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 506-542 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ± 48KHz (Peak) Chassis Aluminium alloy LCD Display Group, Channel, Frequency, Battery Status, User Name , GAIN Adjust Controls Power ON/OFF, AF Level, Frequency (Up/Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Output Connector 4P Mini XLR Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18k Hz Battery UM3, AA x2 Dimensions 62mm (W) x80.3mm (H) x22.6mm (D) Weight 93g Notes Actual product specifications may vary depending on model and region.
RM8,560.00
-
JTS JTS PDM-57 Dynamic Microphone For Instrument ( PDM 57 / PDM57 )
The PDM-57 is a microphone suitable for recordings of guitar instruments or bass harmonicas wind instruments in wood or metal crates or percussions. With its cable connection, dynamic system/cardio-type system - bandwidth 50-16500 Hz - impedance 600 Ohms - sensitivity 1.8 mV/Pa/1 kHz - sound pressure max. 145 dB power supply - XLR micro connections, sym. Connections cable XLR, sym.,XLR, sym. Cast-iron casing, weight 250 g For general sound pickup of instruments and for live performances Natural sound characteristics Characteristic sound with a high recognition value Supplied with connection cable Package Dimensions ?26 x 12.2 x 8.2 cm; 110 Grams Item model number ?PDM-57 Colour ?Black Connector ?XLR Connector Material ?Metal Power Source ?Corded Electric Item Weight ?110 g Manufacturer ?JTS
RM240.00
-
JTS JTS MK-636 Dynamic Supercardiod Microphone ( MK636 / MK 636 )
The MK-636 are designed with JTS D-50 capsule with ultra extended response and superior directional character. The soldering-free detachable capsule module and bomb-proof mechanical structure render the MK-636 an ideal microphone for heavy commercial application. Specifications :- Type : Moving Coil Dynamic Frequency Response : 50~16,500 Hz Polar Pattern : Supercardioid, rotationally Symmetrical about microphone axis,uniform with frequency Sensitivity (at 1,000Hz : -75±3dB*(0.18mV)*0dB=1V /?bar Impedance : 600? Phasing : Positive pressure on diaphragm produces positive voltage on pin2 with respect to pin3 Connector : Three-pin professional audio connector (male XLR type) Net Weight : Mk-636: 280 grams (cable excluded)
RM220.00
-
JTS JTS JS-1USB USB Large Diaphragm Condenser Microphone ( JS 1USB / JS1USB )
The JS-1USB provides excellent performance to both live and studio application. A one inch super thin 24K golden platted diaphragm together with a solid brass machined capsule assembly assures precise polar pattern, full range frequency response and high SPL capability. Advanced circuit design and finest available components offer low self-noise, exceptional transient response and transparent reproduction of an acoustic characteristic. Double brass windscreen prevents pop/EMI effectively. Features ? Advanced 1-inch, externally biased, ultra-thin, 24-karat gold-layered plate, highly smooth-faced, Mylar film diaphragms provide superior transient response ? Finest handcraft assembler, careful test and calibration on every each of microphones ? Formality -machined, nickel-plated brass, acoustic element screen provides enhanced voicing stability and optimal sensitivity ? The cardioid characteristic maintains a smooth frequency response at a distance of 30 to 40 cm ? Full-range frequency response (20 Hz - 20 KHz) for an extremely accurate reproduction of voice and instruments ? Pressure-gradient transducer with double membrane capsule ? Ideal as main and as support microphone in the most differing recording situations Applications ? For most general purpose applications in studios, for broadcasting, film and television ? Used as a main microphone for orchestra recordings, as a spot mic for single instruments, and extensively as a vocal mic. for all types of music and speech ? The classical studio mic. for vocalists (soloists and background vocalists) ? Announcer's mic. for broadcasting, dubbing, voice-over ? Overhead miking drums or percussions ? Spot mic. for wind instruments, brass and woodwind, strings (especially cello and double bass), piano, and percussion
RM910.00
-
JTS JTS JS-22 1/2" studio condenser microphone - Acoustic Guitar , Cymbals , Piano , Strings , Orchestra ( JS22 / JS 22 )
Based on the successful experience of JS-1 series JS-22 is designed for instrument miking from strings to percussions. The JS-22 is built on a solid brass with accurate processing. The 1/2” golden plated diaphragm is manually assembled by JTS craftsman. The precise designed circuit with low cut and pad feature provides flat response. This microphone royally reproduces any kinds of instruments and vocals. Application : Acoustic guitar, acoustic bass, strings, piano, woodwinds, orchestra, stereo pick-up, ensemble vocals and cymbals. JS-22 Type Condenser Mic Frequency Response 20~20,000 Hz Sensitivity -36±3 dB* (15.8mV) 0dB=1V /Pa,1kHz Directional Pattern Cardioid Attenuation Switch -10dB Low Frequency Roll-off 80Hz Impedance 100? Max. SPL For 1% T.H.D. 140 dB Signal To Noise Ratio 78dB Power Supply 36~52VDC phantom power Current consumption ?3mA Output XLR-M type(power module) Dimensions(mm) Ø22.5mm(W) * 150.5mm(H)
RM500.00
-
JTS JTS PDM-3 Moving coil dynamic microphone ( PDM3 / PDM 3 )
*Frequency response especially optimized for the vocal spectrum *Low handling noise and high acoustic feedback suppression *Robust design for a long life *Supplied with connection cable Specifications :- Polar pattern : cardioid System : dynamic Audio frequency range : 50-16,500 Hz Nominal impedance : 600 ? Sensitivity : 1.8 mV/Pa Max. sound pressure : 147 dB Housing material : diecast metal Admiss. ambient temp. : 0-40 °C Weight : 315 g
RM240.00
-
JTS JTS NXB-8M Drum microphone kit - 8pcs (NX-2 x1, NX-6 x 4, NX-7 x1, NX-9 x 2) ( NXB8M / NXB 8M )
* Rugged, lightweight design. * Space available for 1 NX-2, 4 NX-6 and 3 handheld mics. * Offers great convenience and protection.
RM3,100.00
-
JTS JTS CS-1EXS Expansion Kit - Slave ( CS 1EXS / CS1EXS )
CS-1 expansion kit, combined with D7PDM-1 extension cables, can expand the number of using units of i-conference discussion system from 50 to 150 by adding maximum two additional CS-1CU functioning as power supply units only. The system is controlled by the master CS-1CU unit. Using D7P-10 or D7P-20 extension cables to extend the operation distance. SPECIFICATIONS Input : 7-pin DIN Connector Output : 7-pin DIN Connector Dimension(mm) : 115mm(W)* 65mm(D)* 38mm(H) Dimension Packaging Weight : 0.6 kg
RM270.00
-
JTS JTS R4/JSS4B UHF 4 channel diversity system (4x Metal Black Color Handheld transmitter - cardiod capsule
* Adjustable transmission power between Low and High * The panel Lock-On function prevents tampering and RF interruption * Together with JTS various capsules preferred miking is assured. * With TC-22 true condenser capsule (option) NEWEST FEATURE: * It is designed with slot-in charging feature with two AA NiMH rechargeable batteries. Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz Bandwidth 108MHz Wideband RF Outputs Low / High Stability < ±10KHz Frequency Deviation ± 48KHz (Peak) Chassis Aluminium alloy LCD Display Group, Channel, Frequency, Battery Status, User Name , GAIN Adjust Controls Power ON/OFF, AF Level, Frequency (Up/ Down), Lock-on Mode, REMOSET ID Pairing, RF Output Adjust Output Connector 4P Mini XLR Spurious Emissions <-50 dBC Audio Frequency Response 50Hz ~ 18k Hz Battery UM3, AA x2 Dimensions 50mm (W) x253mm (H) x35.5mm (D) Weight 93g Notes Actual product specifications may vary depending on model and region. . The system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation. JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance. Frequency Preparation PLL Synthesized Control Carrier Frequency Range UHF 470~960 MHz S/N Ratio > 105dB T.H.D <0.6% @ 1KHz Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED BAR), RF Meter (LED BAR) , Battery Status Controls Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad Audio Output Level -12dB AF Output Impedance 600? Squelch Pilot Tone & Noise Mute Operation Voltage 100 ~ 240V Output Connector 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D) Notes Actual product specifications may vary depending on region.
RM8,560.00
-
JTS JTS CS-1EXM Expansion Kit Master for CS-1 Conferencing System ( CS1EXM / CS 1EXM )
CS-1 expansion kit, combined with D7PDM-1 extension cables, can expand the number of using units of i-conference discussion system from 50 to 150 by adding maximum two additional CS-1CU functioning as power supply units only. The system is controlled by the master CS-1CU unit. Using D7P-10 or D7P-20 extension cables to extend the operation distance. SPECIFICATIONS Input : 7-pin DIN Connector Output : 7-pin DIN Connector Dimension(mm) : 115mm(W)* 65mm(D)* 38mm(H) Dimension Packaging Weight : 0.6 kg
RM240.00
-
JTS JTS CS-1DU i-Conference Delegate Unit Microphone Gooseneck PA System with JTS MS-G5 Windscreen ( CS1DU / CS 1DU )
The delegate unit enables the attendants to participate in a discussion by speaking through a microphone, controlled by a microphone ON/OFF push-button, and listening to discussion by the internal loudspeaker and external headphone. FEATURES Back electret cartridge with cardioid polar pattern, optimised for voice transmissions Low-distortion speaker Operation via function button Headphone connection Status displays at microphone and desktop station SPECIFICATIONS Headphone output Output level : -8dBV / +2 dBV (nominal / maximum) Output Impedance : 22? Gooseneck Microphone Type : Back Electret Condenser Frequency Response : 50 ~ 18,000Hz Polar Pattern : Cardioid Max. SPL for 1% THD : 125dB Gooseneck Length : 12” (305mm) Dimensions (HxWxD) without mic : 170*115*65 mm Length of mic : 400 mm Weight : 1095 grams Dimension Packaging Weight : 1.8 kg
RM660.00
-
JTS JTS CS-1CUR Control Unit for Conference PA System Speech USB Record ( CS 1CUR / CS1CUR )
CS-1CUR is designed with a USB recorder. The file format is MP3. One 32G USB memory stick can record over 150 hours. One hot key recording makes the job easy. SPECIFICATIONS Input - Type : XLR - Mic : 4.7K? - Line : 20K? Recording Function - Interface : USB3.0 32GByte (Backward Compatible) - Format : MP3 - MAX. Recording Time : More than 240 hours (With 32GByte USB) - Controls : Recording ON/OFF button / Recording status LED display / - Without Playback Funciton - MAX Gain : > 70dB - Frequency Respond : 35 ~ 20,000Hz - THD% Input : <0.06% - Signal-to-noise radio : > 70 dB - Input Attenuation : -50dB - Phantom Power : +48V - Mic In Attenuation : -5dB /-10dB - Mic Attenuation : -10dB /-15dB /-20dB - Output Attenuation : -50dB - Voltage Output : +5 VDC ± 0.2V - Power Supply : 18VDC, 1A - Power Consumption : 18W - Fuse : T1AE 250V (Slow-Blow) - Weight : 2.3 kg - Dimension (mm) : 420(W) * 44(H) * 198.5(D) Dimension Packaging Weight : 1.8 kg
RM1,540.00
-
JTS JTS CS-1CH i-Conference Chairman Unit Microphone Gooseneck PA System with JTS MS-G5 Windscreen ( CS 1CH / CS1CH )
he chairman unit not only provides the same function as the delegate unit, but also supports the addition of a “Priority button”, that enables the chairman to control the discussion by temporary or permanently overriding and deactivating all active microphones of the delegate units. FEATURES Back electret cartridge with cardioid polar pattern, optimised for voice transmissions Low-distortion speaker Reproduction via optional headphones Large function button Status displays at microphone and desktop station Priority button allows to interrupt an ongoing discussion between conference delegates, alternatively with a chime SPECIFICATIONS Headphone output - Output level : -8dBV / +2 dBV (nominal / maximum) - Output Impedance : 22? Gooseneck Microphone - Type : Back Electret Condenser - Frequency Response : 50 ~ 18,000Hz - Polar Pattern : Cardioid - Max. SPL for 1% THD : 125dB - Gooseneck Length : 12” (305mm) - Dimensions (HxWxD) without mic : 170*115*65 mm - Length of mic : 400 mm - Weight : 1095 grams Dimension Packaging Weight : 1.8 kg
RM660.00
-
JTS JTS CM-825I Double ear-hook sub-miniature microphone - Omni-directional - Beige ( CM825I / CM 825I )
* The growing family of headset microphones enables you to customize any application with the right microphones. * These microphones feature versatile adjustments for best fitting and picking up. The ergonomic design provides the ultimate low profile. * The CM-8015 and CM-825i are designed with condenser capsule of diameter 2.5mm representing JTS advanced ECM technology and are ideal for theater, production and broadcasting. * Available in black and beige with various connecting configuration for other brands’ wireless systems. Connector 4 pin mini XLR Frequency Response 50 ~ 18,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -53±3 dB* (2.24mV)*0dB=1V/?bar Impedance 1.2k? Max. SPL for 1% THD 130dB
RM710.00
-
JTS JTS CM-825I Double ear-hook sub-miniature microphone - Omni-directional - Black ( CM825I / CM 825I )
* The growing family of headset microphones enables you to customize any application with the right microphones. * These microphones feature versatile adjustments for best fitting and picking up. The ergonomic design provides the ultimate low profile. * The CM-8015 and CM-825i are designed with condenser capsule of diameter 2.5mm representing JTS advanced ECM technology and are ideal for theater, production and broadcasting. * Available in black and beige with various connecting configuration for other brands’ wireless systems. Connector 4 pin mini XLR Frequency Response 50 ~ 18,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -53±3 dB* (2.24mV)*0dB=1V/?bar Impedance 1.2k? Max. SPL for 1% THD 130dB
RM710.00
-
JTS JTS CM-8015 Single ear-hook sub-miniature microphone - Omni-directional - Beige ( CM 8015 / CM8015 )
Single Ear-hook Sub-miniature Omni-directional Microphone Specifications Connector 801C4 (4 pin mini XLR) 801C3 (3 pin mini XLR) 801CS (3.5 stereo plug) Frequency Response 50 ~ 18,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -53±3 dB* (2.24mV)*0dB=1V/?bar Impedance 1.2k? Max. SPL for 1% THD 130dB
RM570.00
-
JTS JTS CM-8015 Single ear-hook sub-miniature microphone - Omni-directional - Black ( CM 8015 / CM8015 )
Single Ear-hook Sub-miniature Omni-directional Microphone Specifications Connector 801C4 (4 pin mini XLR) 801C3 (3 pin mini XLR) 801CS (3.5 stereo plug) Frequency Response 50 ~ 18,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -53±3 dB* (2.24mV)*0dB=1V/?bar Impedance 1.2k? Max. SPL for 1% THD 130dB
RM570.00
-
JTS JTS CM-801 Single ear-hook microphone - Omni-directional - Beige ( CM801 / CM 801 )
* Single Ear-hook Microphone designed for professional kids.
RM270.00
-
JTS JTS CM-801 Single ear-hook microphone - Omni-directional - Black ( CM801 / CM 801 )
* Single Ear-hook Microphone designed for professional kids.
RM270.00
-
JTS JTS CM-804I Double ear-hook microphone - Omni-directional - Beige ( CM804I / CM 804I )
* The growing family of headset microphones enables you to customize any application with the right microphones. * These microphones feature versatile adjustments for best fitting and picking up. The ergonomic design provides the ultimate low profile. * Available in black and beige with various connecting configuration for other brands’ wireless systems. Connector 801C4 (4 pin mini XLR) 801C3 (3 pin mini XLR) 801CS (3.5 stereo plug) Frequency Response 60 ~ 15,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -64±3 dB* (0.63mV)*0dB=1V/?bar Impedance 1.8k? Max. SPL for 1% THD 130dB
RM420.00
-
JTS JTS CM-804I Double ear-hook microphone - Omni-directional - Black ( CM804I / CM 804I )
* The growing family of headset microphones enables you to customize any application with the right microphones. * These microphones feature versatile adjustments for best fitting and picking up. The ergonomic design provides the ultimate low profile. * Available in black and beige with various connecting configuration for other brands’ wireless systems. Connector 801C4 (4 pin mini XLR) 801C3 (3 pin mini XLR) 801CS (3.5 stereo plug) Frequency Response 60 ~ 15,000Hz Polar Pattern Omni-directional Sensitivity (at 1KHz) -64±3 dB* (0.63mV)*0dB=1V/?bar Impedance 1.8k? Max. SPL for 1% THD 130dB
RM420.00
-
JTS JTS CM-602 Usb Electret Boundary Microphone ( CM602 / CM 602 )
FEATURES On/off switch with power LED Elastic cartridge suspension for preventing impact sound and structure-borne noise With 1.8 m USB connection cable SPECIFICATIONS Capsule Type : Electret Condenser USB Connector : B type , Digital audio interface Indicator Indicator : USB (Mic OFF)....Green | Mic ON…………...Red Switch : Push control: ON/OFF Sensitivity(at 1000Hz) : -53 ± 3 dB * (2.23mV) 0dB = 1V / ?bar Max. SPL For 1% T.H.D. : 125dB Frequency Response : 30~12,000 Hz Directional Pattern : Half-Cardioid Power consumption : 0.4W Dimension (mm) : 73mm(W)* 24mm(H)*110mm(L) Weight : 75g DAC : 32 , 44.1 , 48KHz ADC : 8 , 11.025 , 16 , 22.05 , 32 , 44.1 , 48KHz Bit Depth : 16-Bit USB Type : USB 1.1 / USB 2.0 / USB3.0 Dimension Packaging Weight : 0.6 kg
RM510.00
-
JTS JTS CM-602 Electret Boundary Microphone ( CM602 / CM 602 )
FEATURES On/off switch with power LED Elastic cartridge suspension for preventing impact sound and structure-borne noise Integrated electronics for direct connection to a phantom power supply DC 48 V With 6 m connection cable, 3-pole mini XLR/XLR SPECIFICATIONS Type : Electret Condenser Frequency Response : 30~12,000 Hz Sensitivity (at 1,000Hz) : -53±3 dB* (2.23mV) 0dB=1V /?bar Directional Pattern : Half-Cardioid Impedance : 100? Max. SPL for 1% THD : 125 dB Signal-To-Noise Ratio : 67dB Power Supply : 12-52 VDC phantom power Current Consumption : ?6mA Output Connector : 3P Mini XLR-M type(power module) Net Weight : 88 grams CM-601 Only : 0 Low Frequency Roll-off : 80Hz , 120Hz Switches : Push control: on/off | Function selection:push on/off, momentaryon/off | Low cut : low frequency roll-off Dimension Packaging Weight : 0.6 kg
RM340.00
-
JTS JTS CM-601 Electret Boundary Microphone ( CM601 / CM 601 )
FEATURES The CM-601 is designed for conference, house of worship, and theater applications. The CM-601 features red LED indicator, 3 step Low-Cut switch and back electric cardioid condenser capsule. The membrane ON/OFF switch can be programmed to PUSH ON/PUSH OFF,PUSH TO TALK and PUSH TO MUTE three modes. The precisely calculated circuit plus tailored capsule response ensure transparent sound quality. Internal shock mount minimizes mechanical noise. SPECIFICATIONS Type : Electret Condenser Frequency Response : 30~12,000 Hz Sensitivity (at 1,000Hz) : -53±3 dB* (2.23mV) 0dB=1V /?bar Directional Pattern : Half-Cardioid Impedance : 100? Max. SPL for 1% THD : 125 dB Signal-To-Noise Ratio : 67dB Power Supply : 12-52 VDC phantom power Current Consumption : ?6mA Output Connector : 3P Mini XLR-M type(power module) Net Weight : 88 grams CM-601 Only : 0 Low Frequency Roll-off : 80Hz , 120Hz Switches : Push control: on/off | Function selection:push on/off, momentaryon/off | Low cut : low frequency roll-off Dimension Packaging Weight : 0.6 kg
RM490.00
-
JTS JTS CM-502 Vocal Condenser Microphone - White ( CM502 / CM 502 )
* Wide dynamic range and frequency response for accurate sound reproduction. * High sensitivity and excellent directional pattern allow effective pick-up. * Self-contained electronics eliminate need of external power modules. * Assisted hanger benefits accurate miking. * Mount plate allows microphone to be fixed on the ceiling or wall. * Easy installation. * Durable material allows permanent installation. * Rusty free finish. Type Electret Condenser Frequency Response 100~18,000 Hz Polar Pattern Supercardioid Sensitivity (at 1,000Hz) -48dB*(4mV)*0dB=1V/?bar Impedance 220? Max. SPL for 1% THD 125dB Connector male XLR type Standard Accessories Windscreen / Flexible hanger / Mounting plate
RM270.00
-
JTS JTS CM-502 Vocal Condenser Microphone - Black ( CM502 / CM 502 )
* Wide dynamic range and frequency response for accurate sound reproduction. * High sensitivity and excellent directional pattern allow effective pick-up. * Self-contained electronics eliminate need of external power modules. * Assisted hanger benefits accurate miking. * Mount plate allows microphone to be fixed on the ceiling or wall. * Easy installation. * Durable material allows permanent installation. * Rusty free finish. Type Electret Condenser Frequency Response 100~18,000 Hz Polar Pattern Supercardioid Sensitivity (at 1,000Hz) -48dB*(4mV)*0dB=1V/?bar Impedance 220? Max. SPL for 1% THD 125dB Connector male XLR type Standard Accessories Windscreen / Flexible hanger / Mounting plate
RM270.00
-
JTS JTS CM-501 Condenser lavaliere microphone - Unidirectional ( CM501 / CM 501 )
* Uni-direction for high-quality voice pick-up. * Wide dynamic range and frequency response for excellent sound reinforcement. * Small size for minimum visibility. * Together with clip for easy attaching to a tie, lapel, dress etc. Connector 4P Mini XLR Frequency Response 100~15,000 Hz Polar Pattern Cardioid Sensitivity (at 1KHz) -60±3 dB* (1mV)*0dB=1V/?bar Impedance 2.2k? Max. SPL for 1% THD 130dB Dimension(mm) Ø10.1mm(W)* 26.4mm(H) Net Weight 21.5g
RM150.00
-
JTS JTS JS-1E Budget large diaphragm studio microphone ( JS1E / JS 1E )
The JS-1E is an economic version of JS-1, but does not provide the PAD and LOW CUT function switches and circuitry of the JS-1 and does not include the spider type shock mount that is included with the JS-1. Type Large Diaphragm Condenser Mic Frequency Response 20~20,000 Hz Sensitivity(at 1000Hz) -38 dB* (12.6mV) 0dB=1V /Pa Directional Pattern Cardioid Impedance 200 ? Max. SPL For 1% T.H.D. 132 dB Signal To Noise Ratio 78dB Power Supply 36-52 VDC phantom power Current Consumption ?1mA Output 3Pin XLR (M) (power module) Net Weight 480 grams(16.9oz) Dimensions(mm) Ø56mm(W)* 184mm(H)
RM600.00
-
JTS JTS CM-304SP Sweat Proof Head worn microphone - omni-directional - Orange ( CM304SP / CM 304SP )
The CM-304SP is designed for fitness instruction and any applications where humidity is a concern. The sweat-proof feature is most wanted by the industry. Omni directional pick up pattern catches voice effectively. *Headset microphone for wireless system used in fitness instruction *Omni directional pick up pattern *Sweat-proof microphone housing and entire construction makes CM-304SP reliable in high Type Condenser Frequency Response 50~20,000 Hz Polar Pattern Omni-directional Sensitivity (1,000 Hz) -53±3 dB* (2.24mV) *0dB=1V /?bar Impedance Rated impedance is 1.8K? Max. SPL for 1?THD 130dB
RM390.00
-
JTS JTS JS-1 Large diaphragm studio microphone ( JS 1 / JS1 )
The JTS JS-1 is a studio microphone designed for use in the most demanding applications. A specially contoured 1” super thin 24K gold plated diaphragm provides superb reproduction of high sound pressure level signals at all frequencies. A switchable 10dB pad is built-in to increase the SPL capabilities. It’s precise resolution and ability to handle high sound-pressure levels makes it an excellent all-purpose microphone. Included with the JS-1 a versatile shock-mount with standard 5/8”-27 threads. Type Large Diaphragm Condenser Mic Frequency Response 20~20,000 Hz Sensitivity(at 1000Hz) -38 dB* (12.6mV) 0dB=1V /Pa Directional Pattern Cardioid Attenuation Switch 10dB Low Frequency Roll-off 80Hz Impedance 200 ? Max. SPL For 1% T.H.D. 132 dB Signal To Noise Ratio 78dB Power Supply 36-52 VDC phantom power Current Consumption ?1mA Output 3Pin XLR (M) (power module) Net Weight 480 grams(16.9oz) Dimensions(mm) Ø56mm(W)* 184mm(H)
RM1,130.00
-
JTS JTS CM-304SP Sweat Proof Head worn microphone - omni-directional - Yellow ( CM304SP / CM 304SP )
The CM-304SP is designed for fitness instruction and any applications where humidity is a concern. The sweat-proof feature is most wanted by the industry. Omni directional pick up pattern catches voice effectively. *Headset microphone for wireless system used in fitness instruction *Omni directional pick up pattern *Sweat-proof microphone housing and entire construction makes CM-304SP reliable in high Type Condenser Frequency Response 50~20,000 Hz Polar Pattern Omni-directional Sensitivity (1,000 Hz) -53±3 dB* (2.24mV) *0dB=1V /?bar Impedance Rated impedance is 1.8K? Max. SPL for 1?THD 130dB
RM390.00
-
JTS JTS MA-500 Phantom power adapter - For CM & CX series condenser microphone ( MA500 / MA 500 )
This product provides power to miniature condenser microphones through phantom power. It works with CM series condenser microphones and part of CX series microphones with mini XLR connector. MA-500/MA-500E can be powered by JTS’s PS-1, Phantom Power Supply or 12V to 48V phantom power from other devices. MIC Input 4P Mini XLR(Male) Output. XLR(Male) Phantom Power 12~48V PAD -10dB Low Cut 100Hz -6dB 400Hz -4dB Frequency Response 30~20,000 Hz Impedance 220? T.H.D. <0.045%@1KHz -50dB S/N. >95 dB Weight 40 grams Dimensions(mm) Ø20mm*84.5mm(H)
RM110.00
-
JTS JTS CM-304SP Sweat Proof Head worn microphone - omni-directional - Black ( CM304SP / CM 304SP )
The CM-304SP is designed for fitness instruction and any applications where humidity is a concern. The sweat-proof feature is most wanted by the industry. Omni directional pick up pattern catches voice effectively. *Headset microphone for wireless system used in fitness instruction *Omni directional pick up pattern *Sweat-proof microphone housing and entire construction makes CM-304SP reliable in high Type Condenser Frequency Response 50~20,000 Hz Polar Pattern Omni-directional Sensitivity (1,000 Hz) -53±3 dB* (2.24mV) *0dB=1V /?bar Impedance Rated impedance is 1.8K? Max. SPL for 1?THD 130dB
RM390.00
-
JTS JTS JS-1T Multi-pattern large diaphragm studio microphone ( JS1T / JS 1T )
The JS-1T is a multi-pattern studio microphone with three selectable polar patterns: Cardioid, Omnidirectional and Figure-8 providing superb performance for vocals, acoustic Instruments, drum kits, percussion etc. for either Live or Studio Recording. Type Large Diaphragm Condenser Microphone Frequency Response 20~20,000 Hz Sensitivity(at 1000Hz) -38 dB* (12.6mV) 0dB=1V /Pa Directional Pattern Cardioid,Omnidirectional,figure-8 Low Frequency Roll-off 80Hz Impedance 200? Max. SPL For 1% T.H.D. 132 dB Signal To Noise Ratio 78dB Power Supply 36-52 VDC phantom power required Current Consumption 1mA Output 3 Pin XLR(M) (power module) Net Weight 480 grams(16.9oz) Dimensions(mm) Ø56mm(W)* 184mm(H)
RM1,300.00
-
JTS JTS CM-201i Miniature lavaliere microphone with detachable connecter Beige ( CM201I / CM 201I )
The CM-201 is a minature Omni directional Electret lavalier / lapel / tie clip microphone, perfect or presentations and discussions. Secure fit is ensured due to the supplied tie clip, making it easy to attach and detatch. Cardioid polar pattern. 60-15,000KHz. Black * Omni-directional pick up pattern for various applications. * Wide dynamic range and frequency response for excellent sound reinforcement. * No proximity effect. * Low profile design. * Together with clip for easy attaching to a tie, lapel, dress etc. * Detachable connecter.
RM260.00
-
JTS JTS CX-500F Condenser instrument microphone - Flute ( CX500F / CX 500F )
The CX-500F is built with full range omni directional capsule with golden plating in and outside. The flat frequency response reproduces all types of flutes. The Dynamic design of mic holder can firmly mount CX-500F to flutes with different sizes while the dual injection design prevent the flute from scratch. The flexible mini gooseneck renders a desirable miking position while minimizes air stream noises and blasts. Type Omni-directional Condenser Frequency Response 20~20,000 Hz Sensitivity (at 1,000Hz) -58±3dB*(1.25mV)*0dB=1V/?bar Impedance 1.5k? Max.SPL for 1% T.H.D. 130 dB Signal-To-Noise Ratio 68 dB Output Connector 4P Mini XLR Power Supply 1-5 VDC Current Consumption ?0.5mA Weight 8 grams (including cable) Dimensions(mm) Ø6mm(W)*171mm(H)
RM350.00
-
JTS JTS CX-500DU Dual transducer instrument microphone - String Instrument , Violin , Acoustic Guitar ( CX500DU / CX 500DU )
vibration will be royally reproduced. By moving the microphone a user can get clear and sharp, warm and spacious sound or the combination. Moreover a user can adjust the balance between the two transducers through bundled power module and find the favorite mix. The hi-tech adhesive renders the desired positioning yet no scratch or paint damage will be caused. CX-500DU is ideal for string instruments. Type Omni-directional Condenser Frequency Response 20~20,000 Hz Sensitivity (at 1,000Hz) -58±3dB*(1.25mV)*0dB=1V/?bar Impedance 1.5k? Max.SPL for 1% T.H.D. 130 dB Signal-To-Noise Ratio 68 dB Output Connector 4P Mini XLR Power Supply 1-5 VDC Current Consumption ?0.5mA Weight 6.5 grams (including cable) Dimensions(mm) Ø6mm(W)*13mm(H) Standard Accessory PS-510M
RM350.00
-
JTS JTS CX-504 Condenser stage headset microphone ( CX504 / CX 504 ?
* Uni-direction for high-quality voice pick-up. * Excellent gain-before-feedback and noise isolation. * Lightweight benefits great freedom and mobility. * Ergonomic design ensures comfortable wearing. Connector 4P Mini XLR Frequency Response 30~18,000 Hz Polar Pattern Cardioid Sensitivity (at 1KHz) -68±3 dB* (0.4mV)*0dB=1V/?bar Impedance 680? Max. SPL for 1% THD 130dB Dimension(mm) 285mm(W)* 55mm(H)* 111.3mm(D) Net Weight 56.3 grams
RM340.00
-
JTS JTS CX-500FHW/MA500 Subminiature condenser instrument microphone - Violin , Acoustic Guitar
The CX-500FHW is built with full range omni-directional capsule with golden plating in and outside. The flat frequency response reproduces all types of flutes. The dynamic design of the headset can render a flutter inter change flutes freely. The option of left and right worn plus adjustable boom can help finding the best miking. CX-500FHW is bundled MA-500 phantom power adapter for wired application. Type Omni-directional Condenser Frequency Response 20~20,000 Hz Sensitivity (at 1,000Hz) -58±3dB*(1.25mV)*0dB=1V/?bar Impedance 1.5k? Max.SPL for 1% T.H.D. 130 dB Signal-To-Noise Ratio 68 dB Output Connector 4P Mini XLR Power Supply 1-5 VDC Current Consumption ?0.5mA Weight 6.5 grams (including cable) Dimensions(mm) Ø6mm(W)*13mm(H) Standard Accessory MA-500
RM540.00
-
JTS JTS CS-W4C Conference Wireless Gooseneck Microphone System - Receiver Only ( CSW4C / CS W4C )
CS-W4C is designed with JTS newest wireless and conferencing technology. It provides maximized compatible channels with a given bandwidth. Built in logic circuit provides conferencing feature. A microphone assigned with priority will work as a chairman unit. It overrides other microphones. Logic setting of one CS-W4C receivers can be cascaded. A microphone with priority in one receiver will also have priority in a cascaded system. JTS patented REMOSET synchronizes all four microphones is of 108 MHz bandwidth. This feature allows more attendants to join the conference. SPECIFICATIONS Frequency Preparation : PLL Synthesized Control Carrier Frequency Range : 470~960 MHz / 502.000 - 694.000 MHz (T band) Frequency Setting : 2.4G RF REMOSET Channel : 4 Bandwidth : 36MHz S/N Ratio : >105dB(A) T.H.D : <0.6%@1KHz Sensitivity : -95dBm, S/N>80dB CMRR : >80 dB Audio Frequency Response : 80Hz~16KHz±2dB Antenna Connector : BNC (Female) Antenna Booster Power : DC12V/100mA Display : LCD+LED Controls : Power ON/OFF, Group, Channel, Frequency, Sensitivity, Key Lock, Volume, Output Attenuation(XLR), Frequency Scan(ON/OFF), Antenna Power, Display Setting, Language, Remoset ID Number, Reoset Setting, Priority Setting Audio Output Level : Ref: ±22.5KHz Dev@1KHz Tone | ?6.3 Phone Jack: -10dBV | XLR Jack: -4dBV(Line), -24dBV(MIC) Audio Output Level : 600? Squelch : Pilot Tone & Noise Mute Output Socket : XLR Balanced Socket x5, ?6.3mm Unbalanced x1 Automixer Control : 8PIN MINI DIN Input, 8 PIN MINI DIN Output Power Supply : DC12~15V/1A Dimension(mm) : 485(W) x 45(H) x 260(D) Note : Actual Product specifications may vary depending on model and region Dimension Packaging Weight : 1.2 kg
RM4,000.00
-
JTS JTS CS-W4T Conferene Wireless Gooseneck Microphone System - Transmitter Only ( CS W4T / CSW4T )
SPECIFICATIONS Frequency Preparation : PLL Synthesized Control Carrier Frequency Range : 470~960 MHz / 502.000 - 694.000 MHz (T band) Frequency Setting : 2.4G RF REMOSET RF Outputs : Low / High Stability : Frequency Deviation : ±48KHz Spurious Emissions : Display : LCD Controls : Power ON/OFF, Talk, Group, Channel, Fuequency, Sensitibity, RF Output, Key Lock, REMOSET ID Pairing, REMOSET Setting Battery : UM3, AA x2 Rechargeable : Yes Base Dimension : 116mm (W)*29 mm(H)*138mm(D) Note : Actual Product specifications may vary depending on model and region Dimension Packaging Weight : 1.2 kg
RM1,160.00
You have seen 192 out of 210 products