Arguably the most important pedal on your board, the Canvas Tuner ensures that your instrument is ready to sound its best with the perfect meld of versatility and precision. Packaged in the same tough-as-nails, tour-ready enclosure as all Walrus pedals, the Tuner features a bright 2.8” TFT LCD display that can be viewed under just about any stage lighting conditions, multiple screen orientations, ±0.1 cent accuracy, buffered or true bypass options and more. The Canvas Tuner ensures that you have the most accurate brush to paint your sonic picture.Features: Uncompromising accuracy Flat frequency range spanning from 20Hz to 20KHz 2.8” TFT LCD display Multiple screen orientation options Selectable Strobe or Needle-tuning modes Eight colour themes and  Multiple screen savers including a custom picture mode Tune faster with Tune Assist Versatile bypass options Customize your reference pitch  Specifications Frequency Response 20Hz To 20kHz Tuning Accuracy ±0.1 cent THD 0.001% @ 20Hz -20dBu, 0.001% @ 1kHz -20dBu Noise Floor -112dBu Signal To Noise Ratio 98dB @ 1kHz Input Impedance ~1M Ohms Output Impedance ~400 Ohms Power Requirement 9VDC, 300mA Bypass options True bypass via a small signal relay, Buffered bypass employing a high-quality op-amp-based buffer Dimensions 2.42” (W) x 4.55” (D) x 2.21” (H) / 61.6mm (W) x 115.7mm (D) x 56.2mm (H)

Read more less

The Slöer Stereo Ambient Reverb builds on Walrus Audio's popular Slö lineup but adds two additional reverb algorithms, stereo width control, two additional modulation wave shapes, and the ability to control the sample rate. Now you can create immersive, lush, modulated, sleepy, and ambient soundscapes with more width and depth than ever before.Save your favourite dreamscapes with three onboard presets by simultaneously pressing and holding down on the bypass and sustain switches. Scroll through them by simultaneously pressing and releasing bypass and sustain.Features: Matte black finish with cream ink Five Algorithms: Dark, Rise, Dream, Rain, Light Five Waveshape: Sine, Warp, Sink, Square, Random (accessible by holding down bypass while switching the algorithm dial) Three Momentary Functions - Sustain, Trails mode, Preset Spillover Specifications Power Requirements 9V DC  Current Draw 100mA minimum Dimensions 4.79” × 3.62” × 2.25”

Read more less

The Slöer Stereo Ambient Reverb builds on Walrus Audio's popular Slö lineup but adds two additional reverb algorithms, stereo width control, two additional modulation wave shapes, and the ability to control the sample rate. Now you can create immersive, lush, modulated, sleepy, and ambient soundscapes with more width and depth than ever before.Save your favourite dreamscapes with three onboard presets by simultaneously pressing and holding down on the bypass and sustain switches. Scroll through them by simultaneously pressing and releasing bypass and sustain.Features: Matte black finish with cream ink Five Algorithms: Dark, Rise, Dream, Rain, Light Five Waveshape: Sine, Warp, Sink, Square, Random (accessible by holding down bypass while switching the algorithm dial) Three Momentary Functions - Sustain, Trails mode, Preset Spillover Specifications Power Requirements 9V DC  Current Draw 100mA minimum Dimensions 4.79” × 3.62” × 2.25”

Read more less

Let your storybook adventure grow with the Fable Granular Soundscape Generator. The Fable creates new sonic adventures with five granular delay programs centered around sample and chop algorithms creating bizarrely beautiful networks of sampled and resampled sounds.Features: Reverse Delay into Reverse Granular - Program 1 runs a reverse delay into a reverse granular algorithm, in which sampled grains are played backwards. Forward Delay into Octave Up Granular - Program 2 runs a forward delay into an octave-up granular program, in which sampled grains are played at double speed. Analog-Style Delay into Octave Down Granular - Program 3 runs a warm, dark analog-style delay into an octave-down granular program, in which sampled grains are played back at half speed. Multi-Tap Granular into Multi-Tap Granular (Grain-Verb) - Program 4 runs two multi-tap granular algorithms in series, in which multiple samples are played back from each granular buffer simultaneously. Forward Delay into Randomized Pitch Granular - Program 5 runs a forward delay into a randomized pitch granular program, in which each grain is played back at a randomly selected speed and direction, varying between pitched up double speed, pitched down half speed, normal speed, plus forward and reversed playback from grain to grain. The Fable comes coated in a grey enclosure with Brown, Tan, Orange and dark grey ink with art by David Hüttner. Specifications Bypass Buffered Power 9V DC, Centre Negative, 300mA minimum Dimensions 3.62” x 4.79” x 2.25”

Read more less

Inspired by the rich tones of the Bell and Howell Filmosound 385 projector, the reimagined 385 MKII Overdrive offers dynamic, responsive, tube-like drive with simple but effective controls. The MKII adds an A/B switch to toggle between two sets of volume and gain knobs that can be used like a preset to change volume and/or gain for specific parts, as well as a 385+ switch that slams the front end of the circuit for added high-gain saturation.For years, guitarists seeking pure tone have been taking the tube-powered audio sections of vintage film projectors and using them as guitar amps. We fell in love with the unique sound, and were inspired to capture it in a pedalboard-friendly box when we created the original 385 Overdrive pedal.The 385 was developed to have the same simple but effective tone control as its grandfather. While the amp stacks bass and treble behind a single knob, our design separates them, allowing for a much wider array of tones to be achieved. The user is able to boost and cut bass and treble, allowing them to be creative with mid-frequency scoops and bumps.When we released the 385 Overdrive in 2016, it was quickly adopted by guitar players for the amp-like dynamics you could get at lower gain settings. Soon though, players found that cranking the gain produced a distortion-esque drive that was unique to the 385. To accommodate both setups in a single pedal, we added an A/B switch along with a second set of Volume and Gain knobs that share a single set of tone controls.The pedal is internally running at 18v, which helps us nail the same dynamic feel of the amp in a stomp box. This means it is extremely sensitive to how hard you dig in – just like the amp.  Features: Textured black enclosure with an illustration of an original 385 Filmosound projector by David Hüttner in yellow and red ink. The die cast enclosure’s exact size is 4.77" x 2.6" x 1.39” including knobs. Power requirements are 9VDC (100mA minimum). The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.

Read more less

The Melee Wall of Noise is a distortion + reverb combo that unapologetically uses a joystick to meld reverb and distortion into one massive blaze of sound. With the flip of the order switch, run the distortion into the reverb or reverb into distortion; the signal chain is your call now. For the explorer, the Melee can run one of three different reverb programs Ambient, Octave, and Reverse. Features: Algorithms: Ambient Reverb, Octave Down Reverb, Reverse Reverb with Feedback Ambient Reverb (Pink LED) - Huge reverb capable of massive trails and engulfing your chords into an angry wash of sound. Great for soaring melodic lines or shoegaze-driven chord progressions. Octave Down Reverb (Yellow LED) - Similar to the Dark mode in the Slö, you’ll find an eerie lower octave hovering in the reverb trail for a nice and dark atmospheric touch. Reverse Reverb with Feedback (Blue LED) - Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload. Big, slow, and sad chords love to hang out here. Momentary - Press and hold the sustain switch to ramp up the reverb trails The Melee comes coated in a glossy neon pink enclosure with white, yellow, and green inks with art by David Hüttner. Three bypass modes, DSP, DSP+True, True Bypass Specifications Power 9VDC centre negative, 200mA minimum (not included), Daisy chain power supplies are not recommended Dimensions 3.62” × 4.79” × 3.14” (including joystick height)

Read more less

Inspired by the rich tones of the Bell and Howell Filmosound 385 projector, the reimagined 385 MKII Overdrive offers dynamic, responsive, tube-like drive with simple but effective controls. The MKII adds an A/B switch to toggle between two sets of volume and gain knobs that can be used like a preset to change volume and/or gain for specific parts, as well as a 385+ switch that slams the front end of the circuit for added high-gain saturation.For years, guitarists seeking pure tone have been taking the tube-powered audio sections of vintage film projectors and using them as guitar amps. We fell in love with the unique sound, and were inspired to capture it in a pedalboard-friendly box when we created the original 385 Overdrive pedal.The 385 was developed to have the same simple but effective tone control as its grandfather. While the amp stacks bass and treble behind a single knob, our design separates them, allowing for a much wider array of tones to be achieved. The user is able to boost and cut bass and treble, allowing them to be creative with mid-frequency scoops and bumps.When we released the 385 Overdrive in 2016, it was quickly adopted by guitar players for the amp-like dynamics you could get at lower gain settings. Soon though, players found that cranking the gain produced a distortion-esque drive that was unique to the 385. To accommodate both setups in a single pedal, we added an A/B switch along with a second set of Volume and Gain knobs that share a single set of tone controls.The pedal is internally running at 18v, which helps us nail the same dynamic feel of the amp in a stomp box. This means it is extremely sensitive to how hard you dig in – just like the amp.Features: Flat black enclosure with an illustration of an amp tube warm and ready to rock in cream ink by Josh Yosurack. The die cast enclosure’s exact size is 4.77" x 2.6" x 1.39” including knobs. Power requirements are 9VDC (100mA minimum). The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.

Read more less

Adding another tool to the musical paint pallet, Walrus Audio is creating another way to design your tone with the Canvas Series Passive Re-Amp. The Re-Amp is a studio tool designed to send recorded guitar, drums, or other instrument tracks from your recording session through pedals and effects, or different amp combinations. The Re-Amp makes it’s appearance to facilitate all-new ways to experiment with your songs.Artists and producers can save time on tracking sessions by recording dry tracks first, then using Canvas Re-Amp’s custom transformer to convert line-level signals, optimizing them to work with amps and guitar pedals of any kind to explore limitless tones and sounds. Specifications Frequency Response 20Hz To 20kHz THD+N 0.07% @ 20Hz / +4dBu Input 0.001% @ 1kHz / +4dBu Input Maximum Input Level +21dBu @ 20Hz Noise Floor -116dBu Signal To Noise Ratio 114dB @ 1kHz Input Balanced Line-Level Input Impedance 3k Ohms Output Unbalanced Instrumental-Level Output Impedance 2.5k Ohms Common Mode Rejection Ratio 79dB @ 20Hz / +4dBu Input

Read more less

The Fundamental Reverb provides you with the core sounds of ambient effects, with the tonal integrity to live on a professional's pedalboard but with simplified controls friendly enough for even the newest effect pedal users. With 3 reverb algorithms, you can go from an ambient hall to an analogue spring emulation, as well as a bright plate emulation.Features: Decay - Control the amount of reverb decay time. Left is the minimum and right is the maximum amount of time. Tone - Control the amount of overall brightness to the reverb. Mix - Control the mix of the effect and the original clean signal. All the way to the left outputs only the fully clean signal, and all the way to the right outputs only the affected Reverb signal.  Slide Switch - The slide switch allows you to change between three distinct Reverb algorithms. Hall Mode - Emulates the large sounds of an acoustic hall, characterized by long decay times and a more diffused and spacious sound. Spring Mode - Emulates the bouncy twang of the spring reverb commonly found in tube amps. Plate Mode - Emulates a smooth analogue plate reverb, offering a denser, more focused reverberation of the signal. The Reverb comes in a Black finish with blue-green and off-white ink. Specifications Power 9V DC, Centre Negative, 100mA minimum Dimensions 4.33" x 2.16" x 1.61”

Read more less

The Fundamental Tremolo is a classic optical tremolo, giving you that iconic chewy movement, with the tonal integrity to live on a professional's pedalboard but with simplified controls friendly enough for even the newest effect pedal users. With 3 wave shapes to select from, you can get sounds from smooth and soothing to glitchy, wild, and crazy.Features: Rate - The Rate slider sets how fast or slow the LFO is oscillating. A lower rate gives a gentle wavering texture, while a higher rate gives a shimmering and pulsating effect. Depth - The Depth slider controls the strength of the tremolo effect. At a lower depth, the volume oscillations stay closer to the input for a more subtle movement. At a higher depth, the tremolo becomes more pronounced with the volume greater. Volume - The Volume slider sets the overall output volume of the pedal. Slide Switch - The slide switch allows you to change between three distinct oscillator waveforms Sine Mode - Sine gradually adds and decreases volume smoothly for an easy and subtle tremolo. Square Mode - Much more pronounced than sine, square wave has a more on-off pattern. Random - Uses sample and hold that picks new random values at an interval set by the rate control. The Tremolo comes in a Black finish with orange and off-white ink.  Specifications Power 9V DC, Centre Negative, 100mA minimum Dimensions 4.33" x 2.16" x 1.61”

Read more less

The Fundamental Phaser is a versatile digital emulation of a classic phaser with the tonal integrity to live on a professional's pedalboard but with simplified controls friendly enough for even the newest effect pedal users. With 3 types of Phaser algorithms to select from, you can get sounds ranging from light tonal modulation to a highly modulated and resonant phaser.Features: Rate - Controls the rate of the modulated LFO. A higher rate will produce a faster and more pronounced pitch modulation, while a lower rate will produce a slower and more subtle effect. Feedback - Control the amount of affected signal sent back into the feedback loop, more feedback creates more resonance. Depth - Controls the depth of the modulated LFO. This affects the amount of pitch modulation applied to the affected signal. Slide Switch - The slide switch allows you to change between three distinct flavours of the pedal. Light Mode - A scaled-back phaser that slightly modulates your signal. Medium Mode - Emulates a classic warm analogue phaser. Heavy Mode - Multi-voiced phaser with lots of experimental sounds.  The Phaser comes in a Black finish with pink and off-white ink. Specifications Power 9V DC, Centre Negative, 100mA minimum Dimensions 4.33" x 2.16" x 1.61”

Read more less

The Fundamental Distortion is a 3-mode distortion with the tonal integrity to live on a professional's pedalboard but with simplified controls friendly enough for even the newest effect pedal users. It covers a wide range of sounds from dark and doom through sharp cutting leads.  Features: Gain - The Gain slider sets the amount of gain applied to your guitar signal passing through the distortion circuit. Tone - The Tone slider controls the signal's frequency response after distortion. The Left of the centre cuts highs and the right of the centre boosts highs. Volume - The Volume slider sets the overall output volume of the pedal. Slide Switch - The slide switch allows you to change between three distinct flavours of the pedal. Each position has different clipping modes or tone profiles. Dark Mode - Asymmetric silicon clipping with an added high-frequency cut. Think dark and dynamic. Si Mode - Classic silicon hard clipping diodes. Things get compressed and crunchy. LED Mode - LED hard clipping diodes. A dynamic and crunchy sound.  The Distortion comes in a Black finish with yellow and off-white in  Specifications Power 9V DC, Centre Negative, 100mA minimum Dimensions 4.33" x 2.16" x 1.61”

Read more less

The Fundamental Chorus is a digital emulation of a classic analog chorus, recreating bucket brigade modulation, with the tonal integrity to live on a professional's pedalboard but with simplified controls friendly enough for even the newest effect pedal users. With 3 types of chorus algorithms to select from, you can get sounds ranging from gentle modulation all the way to 80's tri-chorus.  Features: Rate - Controls the rate of the modulated LFO. A higher rate will produce a faster and more pronounced pitch modulation, while a lower rate will produce a slower and more subtle effect. Depth - Controls the depth of the modulated LFO. This affects the amount of pitch modulation applied to the affected signal.  Mix - Controls the mix of the effected signal and the original clean signal. All the way to the left outputs a fully clean signal, and all the way to the right outputs only the modulated signal.  Slide Switch - The slide switch allows you to change between three different flavours of the pedal. Light Mode - Emulates a traditional analogue chorus with warm, lush, and organic tones. Medium Mode - Adds multiple taps to further modulate a classic chorus. Heavy - Emulates a classic Eighties effect, the LCR tri-chorus, which is known for its rich and complex modulated sound. The Chorus comes in a Black finish with purple and off-white ink.  Specifications Power 9V DC, Centre Negative, 100mA minimum Dimensions 4.33" x 2.16" x 1.61”

Read more less

The Fundamental Drive is a versatile overdrive with the tonal integrity to live on a professional's pedalboard but with simplified controls friendly enough for even the newest effect pedal users. It’s the perfect tool at the front of your chain to set the tone for your whole rig. Features: Gain - The Gain slider sets the amount of gain applied to your guitar signal passing through the overdrive circuit. Tone - The Tone slider controls the amount of high-frequency level reduction. Volume - The Volume slider sets the overall output volume of the pedal. Slide Switch - The slide switch allows you to change between three distinct flavours of the pedal. Each position has different clipping modes or tone profiles. Smooth Mode - A classic soft-clipping silicon overdrive. Clean and smooth. Crunch Mode - Silicon soft clipping with added hard clipping silicon diodes and a slight low-end boost. Crunchy and edgy. Bright Mode - Silicon soft and hard clipping from the Crunch mode with a pre-clipping low-end cut. Bright and glassy. The Drive comes in a Black finish with red and off-white ink.  Specifications Power 9V DC, Centre Negative, 100mA minimum Dimensions 4.33" x 2.16" x 1.61”

Read more less

The Fundamental Fuzz is a 3-mode aggressive fuzz pedal with the tonal integrity to live on a professional's pedalboard but with simplified controls friendly enough for even the newest effect pedal users. It can live anywhere in your chain: hit it with your favourite overdrive or push it into another crazy distortion.  Features: Gain - The Gain slider sets the amount of gain applied to your guitar signal passing through the fuzz circuit. Tone - The Tone slider controls the signal's frequency response after distortion. The Left of the centre cuts highs and the right of the centre cuts lows. Volume - The Volume slider sets the overall output volume of the pedal. Slide Switch - The slide switch allows you to change between three distinctly different flavours of the pedal. Each position has different clipping modes or tone profiles. Gate Mode - Lowers bias voltage in the main fuzz section, creating a gated and starved sound. Classic Mode - Screaming fuzz with an iconic mid scoop, give you a compressed and crunchy sound. Mid+ - Adds mid boost to flatten out the tone stage, resulting in a compressed but rich and full sound. The Fuzz comes in a Black finish with light orange and off-white ink.  Specifications Power 9V DC, Centre Negative, 100mA minimum Dimensions 4.33" x 2.16" x 1.61”

Read more less

The Fundamental Delay provides you with the core sounds of repeated effects with the tonal integrity to live on a professional's pedalboard but with simplified controls friendly enough for even the newest effect pedal users. With 3 delay algorithms, you can go from clean digital feedback to an analogue delay emulation, as well as reversing your trails.  Features: Time - Control the rate of delayed repeats. Max delay time is one second  Feedback - Control the number of repeats. Mix - Control the mix of the effect and the original clean signal. All the way to the left outputs a fully clean signal, and all the way to the right outputs only the delay repeats.  Slide Switch - The slide switch allows you to change between three distinct Delay algorithms. Digital Mode - Add a clean rhythmic delay back into your signal, with transparent repeats. Analog Mode - Add a filtered and slightly distorted delay back into your signal, designed to replicate the characteristics of bucket brigade delay chips. Reverse Mode - Add reversed trails back into your signal, create gentle melodies, or push into reverse feedback overload. The Delay comes in a Black finish with green and off-white ink.   Specifications Power 9V DC, Centre Negative, 100mA minimum Dimensions 4.33" x 2.16" x 1.61”

Read more less

Create the soundtrack to your storybook adventure with the Lore Reverse Soundscape Generator. Made up of five different programs, the Lore is an ambient creation machine built around reverse delay and reverbs.Featuring two DSP chips running in series, each with their own analog feedback path, the Lore takes you on an adventurous journey rich with themes of reversing, time-stretching, pitch-shifting, and vast ambience. Features: The Lore comes coated in a muted green enclosure with Cream, Orange, brown and dark green ink with art by David Hüttner. The die-cast enclosure’s exact size is 3.62” x 4.79” x 2.25” including knobs. Buffered bypass. Power requirements are 9VDC, centre negative (300mA minimum). The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6 The V4 The Kraken guitar amp partners a V4 Series all-valve preamp with a solid-state, 180-watt Class D power amp. Building on the success of the V4 The Duchess, the V4 Kraken guitar amp continues the ultra-compact size and huge tones by adding even more features. The V4 Kraken guitar amp features Two notes audio engineering Torpedo-embedded DynIR Virtual Cabinet technology making it easy to take your cabinets anywhere!Features: Aluminium chassis Reverb Two notes Cab Sim Technology with 6 positions preset control Three-band EQ Series FX loop Balanced DI out on TRS 6.3mm jack Additional 9V DC power outlet for pedals etc (maximum total current 500mA, centre-negative) Specifications Format Guitar amplifier head Preamp Valves 1 x EC900, 3 x CV4014 Power Output 180W @ 4 ohms (approx 90W @ 8 ohms, 45W @ 16 ohms) Power Requirements Mains IEC Dimensions 258 mm (W) x 174 mm (H) x 105 mm (D) Weight 3.75 lbs / 1.7 kg

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6 V4 The Duchess partners a V4 Series all-valve preamp with a solid-state, 180-watt Class D power amp. Its ultra-compact size and negligible weight disguise the huge tones it can produce. It's great for home and studio players looking for an elegant solution on a small cab or desktop, or for touring musicians who need a great-sounding, dependable pedal platform amp.Features: Steel Chasis Reverb Tremolo Remote switching for trem Series FX loop Balanced DI out on TRS 6.3 mm jack Additional 9V DC power outlet for pedals etc (maximum total current 500mA, centre-negative) Specifications Format Guitar amplifier head Preamp Valves 1 x EC900, 3 x CV4014 Power Output 180 W @ 4 ohms (approx 90 W @ 8 ohms, 45 W @ 16 ohm) Power Requirements Mains IEC Dimensions 225 mm (W) x 175 mm (H) x 100 mm (D)  Weight 1.7 kg / 3.75 lbs

Read more less

Features: 4-in-1 Overdrive and Distortion Two all-new amp-like hybrid tones All analogue signal path Switch from Buffered to True Bypass on the fly All new proprietary case shape – manufactured by RKFX in the USA  Specifications Bypass True Bypass/Buffered Footswitch Controls Tone, Drive, Level, Spectrum Mid Focus Switch, Hard/Soft Clip Switch  Power 9-18V DC Centre Negative Current Draw 23 mA

Read more less

Keeley combines two completely different overdrive and distortion circuits to create four different drives in one box. The Blues Disorder has two switches that allow you to separate the tone control from the clipping section. By mixing and matching the Tone and Drive switches you get two hybrid sounds. With both switches up it’s a smooth, soft-clipping Bluesy Breaker. The BB side is a low gain, soft-clipping overdrive. With both switches down it’s a fuller sounding, hard-clipping OC Distortion. The clever design keeps the pedal in a simple three-knob overdrive with 4 unique sounds. Switch easily between buffered or true-bypass; whichever sounds best in your rig. The Keeley Blues Disorder Overdrive and Distortion is designed and manufactured entirely by Keeley Electronics in its brand-new aluminium enclosure.Features: 4-in-1 Overdrive and Distortion Two all-new amp-like hybrid tones All analogue signal path Switch from Buffered to True Bypass on the fly All new proprietary case shape – manufactured by RKFX in the USA  Specifications Bypass True Bypass/Buffered Footswitch Controls Tone, Drive, Level, Spectrum Mid Focus Switch, Hard/Soft Clip Switch  Power 9-18V DC Centre Negative Current Draw 29 mA

Read more less

Imagine being able to combine your favourite parts of different overdrive & boost pedals in order to create hybrid sounds no one has ever played through before. That is exactly what we’ve engineered with the Noble Screamer. It’s a 4-in-1 pedal that gives you two very familiar drive circuits and two brand-new amp-like distortion tones that no one has used before. It’s almost like pedal modelling, except these are 100% analogue circuits, and you decide which tone-control or clipping section you want to play through. You can play through battle-tested, classic overdrive effects or innovate new music with hybrid tones, let your ears be the judge. Even with all of these features the pedal remains a simple and easy to use three knob overdrive. The innovation in the Noble Screamer doesn’t end there; our new design features true-bypass or buffered, truly silent switching, on the fly. The Keeley Noble Screamer Overdrive and Boost is entirely manufactured at Keeley Electronics and is the first in our new aluminium enclosure. Features: 4-in-1 Overdrive and Boost Two all-new amp-like hybrid tones All analogue signal path Switch from Buffered to True Bypass on the fly All new proprietary case shape – manufactured by RKFX in the USA Specifications:  Bypass: True Bypass/Buffered Footswitch Controls: Tone, Drive, Level, Spectrum Mid Focus Switch, Hard/Soft Clip Switch  Power: 9-18V DC Centre Negative Current Draw: 23 mA

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA   - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom - Third party pickup charges to be beared by buyer - Kindly put a remark for self collection / Lalamove in your order - installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges) EAST MALAYSIA ORDERS - Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks time FOR STANDARD DELIVERY Please select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner.  *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working days Waze: Live Music Centre No 20 & 20-1 & 22 & 22A,  Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, Selangor Contact : 0-1-6-5-2-0-1-0-6-6   100-watt, 3-channel Floorboard Amplifier with 3 Power Amp Responses, Boost, Reverb, FX Loop, MIDI Control, Cab Rig Speaker Simulation, and 4-in/2-out USB-C Audio Interface   AMPED 3 is a 100 Watt pedal multi-channel amplifier. It features one of the highest gain circuits that Blackstar has ever developed and with the ability to recall your favourite tones via presets. AMPED 3 is capable of delivering the tone and feel of traditional valve amps. You can use it in the front end of a traditional amp, power a cabinet at 100 Watts or go direct, ensuring you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity ensure it’s equally at home in the studio or on the stage.   High Headroom Power Amp Design The power amplifier’s unique, high-headroom design does not compromise on output even at 16 Ohms. Get maximum power and optimum tone with any cabinet set-up at 8 or 16 Ohms. Blackstar’s patented Response control offers distinctly different and authentic power valve responses and guitar amp dynamics.   Speaker Simulator and Direct Outputs Fine-tune your cabinet, mic, and room simulations with our CabRig technology and output via XLR or stereo jack. Alternatively, connect via USB for effortlessly simple recording to your DAW without the need for an interface.   User Programmable Presets Create, store and recall your favourite Clean, Crunch and Overdrive presets directly from AMPED 3.   Key Details: 100w high gain, performance ready amp with user presets. Unique high-headroom design that automatically matches to the speaker impedance to deliver maximum power and optimum tone with any 8 or 16Ohm cabinet set-up. Response control delivers three distinctly different and authentic power valve responses – EL34, 6L6 and EL84. Each setting delivers the response, dynamics, sag and break-up characteristics of the selected valve power amp. Choose from Clean Bright, Clean Warm, Crunch, Super Crunch, OD1 and OD2 voicings to dial in your perfect tone. Built in Boost that can be set to Pre or Post. Built in studio quality Reverb with ‘freeze’ function. Pro connectivity and integration into your setup using low latency USB audio as an interface for recording, TRS stereo line out and XLR Mono D.I. for live use. Effects loop, 2x 9V DC outputs and MIDI control for easy integration into your pedalboard or rig. CabRig built in.

Read more less