The Rode NT45-O omnidirectional microphone capsule is found on the Rode NT4, NT5, NT6 and NT55 microphones. The removable capsule features an omnidirectional polar pattern for a generous pick up area at the front and off-axis sections of the microphone. This capsule replaces lost or damaged capsules. Replacement Capsule for the NT4 / NT5 / NT6 and NT55 Microphones

Read more less

Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.     Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer. Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for film making on a mic stand or boom.    Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair.           FEATURES   Externally biased condenser Cardioid or Omni polar pattern using included interchangable capsules Gold sputtered 1/2” capsule Three position PAD - 0dB, -10dB and -20dB Three position High-Pass Filter - flat, 75Hz and 150Hz Surface mount circuitry Low noise Available as Certified Matched Pair       SPECIFICATIONS    Acoustic Principle : Pressure Gradient Active Electronics : JFET impedance converter with bipolar output buffer Capsule : 0.50" Polar Pattern : Cardioid Address Type : End Frequency Range : 20Hz - 20kHz Output Impedance : 100O Maximum SPL : 136dBSPL Maximum Output Level : 8.0mV (@ 1kHz, 1% THD into 1KO load) Sensitivity : -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) : 15dBA Power Options : 48V phantom power Weight : 110.00g Dimensions : 145.00mmH x 20.00mmW x 20.00mmD Output : XLR Output

Read more less

The RØDE NT6 is an extremely compact 1/2" cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required.       Although clearly relevant to instrument miking, the NT6 is extremely well suited to any situation where an unobtrusive but powerful microphone is required such as location recording.       The microphone is split into two modular components, joined by via a custom 3m (10') shielded, Kevlar® reinforced cable.           IN THE BOX:   - Rode NT6 - Padded Zip Pouch - RM5 Mic Clip - Pop Shield       FEATURES   1/2” condenser capsule with remote preamp Gold sputtered externally biased condenser Two position PAD - 0dB and -10dB Two position High Pass Filter - flat and 80Hz Includes two-axis swivel mount, 3m Kevlar® fibre reinforced cable, windshield and zip pouch Heavy duty satin-nickel plated body Low noise and full frequency response

Read more less

You know you can count on RDE for an outstanding mic at a great price. And that extends to film and video work! When you need a quality shotgun mic that built to perform you want RDE NTG-2. It lightweight so youl have no problems using it as a camera-mounted mic or on a boom pole.          The NTG-2 also sounds absolutely great,thanks to its wide frequency range and tight supercardioid pickup pattern. Want tough? Itl take what you can dish out and keep sounding fantastic in any environment. Want flexibility? This mic can be phantom powered or you can run it off of a battery. The NTG-2 comes complete with a mount and a handy windshield.           IN THE BOX:   - Rode NTG2 - RM5 Microphone Clip - WSVM Pop Filter/Wind Shield - Padded Zip Pouch       FEATURES   Supercardioid Frequency Range: 20Hz-20kHz selectable HPF @ 80Hz/12dB octave Maximum SPL: 131dB Broadcast sound quality Rugged metal contruction Condenser microphone transducer Weighing 161 grams approx. (5.17 oz.) Low noise circuitry Low handling noise Supplied with stand mount and zip pouch Designed and manufactured in Australia       SPECIFICATIONS   Microphone Type:Shotgun Condenser Polar Pattern:Supercardioid Frequency Response:20Hz-20kHz Max SPL:131 dB Output Impedance:250 ohms (350 ohms w/Battery) Signal to Noise Ratio:76dB (A weighted) Self Noise:18dB (A weighted) Low Cut Filter:80Hz Length:10.94" Connector:XLR Weight:0.36 lbs. Power:Phantom PowerBattery (1 x 1.5V AA) Included Accessories:Stand MountWindscreenCarry Bag Manufacturer Part Number:NTG-2

Read more less

The RODE NTG-3 shotgun condenser microphone gives you uncompromising performance in even the toughest of conditions, at a very friendly price! The NTG-3 is very moisture-resistant, and its low handling noise and self-noise properties make it great for film and broadcast applications in the field. This highly sensitive mic provides "you are there" sound quality and ultra-reliable performance while rejecting RF interference successfully. A water-resistant aluminum storage cylinder, wind shield, pouch, and mic clip are included with the RODE NTG-3.IN THE BOX:- Rode NTG3- RM5 Microphone Clip- WSNTG3 Pop Filter- Aluminum Storage Cylinder- Padded Zip Pouch- Limited 1-Year Warranty, Extendable to 10 Years upon Registration FEATURES Designed to withstand adverse environmental conditions Very low self-noise Extremely low handling noise High level of immunity to radio frequency interference True condenser (external RF biased) High sensitivity Superior broadcast sound quality Designed and manufactured in Australia Water-resistant aluminium storage cylinderwindshieldzip pouchand microphone clip included SPECIFICATIONS Microphone Type:Shotgun Condenser (RF biased) Polar Pattern:Supercardioid Frequency Response:40Hz-20kHz Max SPL:130 dB Output Impedance:25 ohms Signal to Noise Ratio:81dB (A weighted) Self Noise:13dB (A weighted) Length:10" Connector:XLR Weight:0.36 lbs. Power:Phantom Power Dimension Packaging Weight : 0.6 kg

Read more less

A revised take on a time-tested shotgun mic from Rode the NTG4+ offers you premium broadcast-ready sound and the versatility you need to use it on and off camera. One of the things about this highly directional condenser microphone that really stood out to the engineers here at Live Music is how quiet it is. Part of that has to do with the persistent-state digital switching used to toggle the NTG4+ onboard highpass filter-10dB padand high-frequency boost.           IN THE BOX:   - Rode NTG4+ - RM5 Microphone Clip - Windshield for NTG4 & NTG4+ - Padded Zip Pouch - Micro USB cable       FEATURES   Broadcast-quality sound Low-noise circuitry Fully charged in under two hours via MicroUSB Over 150 hours operation per charge Rugged metal construction Convenient digital switching High-frequency boost Highpass filter (Flat/75Hz) PAD (-10dB) MicroUSB cable included Ten year extended warranty with online registration Requires +48V phantom power or will run on internal rechargeable battery       SPECIFICATIONS   Microphone Type:Shotgun Condenser Polar Pattern:Supercardiod Frequency Response:20Hz-20kHz Max SPL:135dB SPL (1kHz at 1% THD1 Kohm) Output Impedance:200 ohms Self Noise:16dB (A weighted) Low Cut Filter:75Hz Pads:-10dB Length:10.94 Connector:XLR Weight:6.2 oz. Power:Battery/Phantom Manufacturer Part Number:NTG4+

Read more less

One of the shortest and lightest-weight shotgun mics in the industry, the Rode NTG5 sets a new standard for location recording professionals. An acclaimed innovator in shotgun mic technology, Rode designed the NTG5 to deliver superior results across a wide range of demanding applications. Whether you’re involved in ENG or booming motion pictures, you’ll appreciate the NTG5’s rugged, ultra-lightweight construction and crystal clear, broadcast-quality sonics.        Featuring a revolutionary acoustic design with circular ports instead of the linear slots found on other shotgun mics, the NTG5 captures dialogue and other sound sources with exceptional transparency and a natural, uncolored sound. With its tailored, linear frequency response, supercardioid pickup with smooth off-axis response, and exemplary low self-noise, the NTG5 is essential kit for your run bag.         IN THE BOX:   - Rode NTG5 - PG2-R Pistol Grip Shock Mount - Small Pouch Bag - RM5 Mic Clip - WS10 Windshield - PG2-R Pro Cable - Foam Windshield       FEATURES   Revolutionary annular line tube technology acoustic design Captures natural, uncolored, broadcast-quality sound Deliver superior results across a wide range of demanding applications Extremely lightweight (2.68 ounces) and short in length (7.99") Tailored frequency response; very low self-noise of just 10dBA Highly directional supercardioid polar pattern with smooth off-axis response RF-bias technology and conformal coating for superior performance and reliability in adverse environmental conditions       SPECIFICATIONS   Microphone Type:Shotgun Condenser Polar Pattern:Supercardioid Frequency Response:100Hz-20kHz (±3dB) Output Impedance:25 ohms Signal to Noise Ratio:84dB Self Noise:10dB SPL A-weighted Power:48V Phantom Power Connector:XLR Length:7.99" Weight:0.17 lbs.  

Read more less

Based on RØDE's award winning NTG3 shotgun microphone, the NTG8 is a broadcast quality RF-bias shotgun microphone that exhibits increased directionality across a wide frequency response range. This makes the NTG8 the perfect microphone for film, television, sports and outdoor broadcasting, live performance, and any professional distance miking application.    Like the NTG3, the NTG8 features low self-noise, natural sound without colouration both on and off-axis, and RF bias technology to ensure that it is almost completely resistant to high humidity environments which could cause other condenser microphones to fail.         The NTG8 is finished in matte black and supplied with a specially designed shock mount (SM8) that is engineered to provide excellent handling noise isolation, cable management and versatile mounting options for the microphone. A rugged weatherproof aluminium cylinder is also included, providing ultimate protection for the microphone when in transport or storage. The WSNTG8 windshield completes the package, providing light environmental protection.           IN THE BOX :   Rode NTG8 Shock Mount for Long Shotgun Microphones Windscreen Storage cylinder       FEATURES   Superior broadcast sound quality High Sensitivity Super-cardioid polar pattern Highly directional polar response Natural sounding audio both on and off-axis Designed to withstand adverse environmental conditions Extremely low handling noise High level of immunity to radio frequency interference True Condenser (external RF biased)       SPECIFICATIONS    Acoustic Principle : Line Gradient Active Electronics : RF Bias Capsule : 0.50" Polar Pattern : Supercardioid Address Type : End Frequency Range : 40Hz - 20kHz Output Impedance : 25O Maximum SPL : 124dBSPL Maximum Output Level : 8.2mV (@ 1kHz, 1% THD into 1KO load) Sensitivity : -20.0dB re 1 Volt/Pascal (97.50mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) : 8dBA Power Options : 48V phantom power Weight : 345.00g Dimensions : 559.00mmH x 19.00mmW x 19.00mmD Output : XLR Output

Read more less

The NTH-100M is a professional over-ear headset that combines the exceptional sonic performance of the award-winning NTH-100 headphones with a broadcast-quality headset microphone. Whether you're in media or broadcast, podcasting, streaming, gaming or working from home or in the office, the NTH-100M offers crystal-clear voice capture and pristine audio in an incredibly comfortable and sleek package. Key Features: Professional over-ear headset Custom-matched drivers deliver an incredibly accurate frequency response and low distortion Precision-engineered acoustic construction optimised for exceptional detail, clarity and a very natural sound Broadcast-grade microphone for natural voice reproduction and excellent speech intelligibility in any environment Microphone is positioned for optimal plosive rejection for crystal-clear voice capture Alcantara® headband and earcup cushions with revolutionary CoolTech™ gel Fully adjustable headband with FitLok™ locking system Easily detach the microphone via its sturdy locking connector to use as professional monitoring headphones Designed and made using high-grade components in RØDE’s state-of-the-art facilities in Sydney, Australia NTH-Mic headset microphone also available separately Lifetime warranty*

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6Custom-matched 40mm driver with revolutionary resonant chamber provides deep and balanced bass while maintaining midrange and treble clarityInnovative acoustic design offers accurate frequency response and ultra-low distortion for a rich and detailed listening experienceSuperior passive noise isolation ideal for critical monitoringContoured headband to minimise wearing fatigue, allowing you to create for longerSleek, durable lightweight aluminium construction offers the ideal blend of contemporary design and long-lasting performanceDetachable cable with locking connector featuring dual-sided attachment for maximum flexibility and convenienceDesigned and made with a lifetime warranty using high-grade components in RØDE’s state-of-the-art facilities in Sydney, Australia

Read more less

The black, 7.9' Rode NTH-Cable is a one-sided, flexible cable for use with the Rode NTH-100 headphones. At one end it a locking connector that securely attaches to either the left or right earcup, and at the other end is a reinforced 3.5mm TRS plug with integrated strain-relief molding for reliable, long-term use. The connectors on each end feature a removable ring that can be replaced with any of the included colored rings for easy cable identification.A threaded 1/4" adapter is included for plugging into professional audio equipment. There is even a rubber seal that can be inserted to protect the earcup connector that is not in use. The NTH-Cable is available in five different colors to help you customize the look of your headphones or to match the colors used on the RODECaster Pro podcast studio and RODEConnect software.Customize Your NTH-100 Headphones Flexible, one-sided cable for use with the Rode NTH-100 headphones High-quality, reliable construction Locking connector attaches to the earcup for complete security Includes threaded 1/4" adapter for use with professional audio equipment Includes Colors ID set—swappable colored rings for easy cable identification

Read more less

The NTH-Mic is a broadcast-quality microphone for the RØDE NTH-100 headphones that transforms them into a professional headset. It delivers natural, highly detailed voice reproduction in a sleek, unobtrusive design, and is optimally positioned to reject plosives, making it ideal for media, broadcast, podcasting, streaming, gaming and working from home or in the office.       Key Features: Broadcast-quality headset microphone Plugs directly into the RØDE NTH-100 headphones, transforming them into a professional headset High-quality condenser capsule delivers clear, natural and highly detailed voice reproduction Easily detachable via a sturdy locking connector Positioned for optimal protection against plosives Low-profile, unobtrusive design Designed and made in RØDE’s state-of-the-art facilities in Sydney, Australia Complete NTH-100M professional over-ear headset also available

Read more less

Like it’s bigger brother the K2, the RØDE NTK is a premium valve condenser microphone designed to provide incredible detail and warmth in the studio. Its cardioid polar pattern is perfect for most single instrument recording scenarios.  The electronic circuitry complementing this very sensitive transducer includes a hand-selected twin-triode 6922 valve and audiophile grade components.  The result is an ultra-wide dynamic range, low noise, and stunning tube warmth. The NTK's rich valve sound is ideal for vocals, acoustic instruments, drum overheads, guitar amps and pianos IN THE BOX : Rode NTK Ring-Mount Microphone Stand Rugged Microphone Case FEATURES   Large 1” capsule with gold plated diaphragm Class “A” valve circuitry Hand selected and graded 6922 twin-triode valve Dedicated power supply Internal capsule shock mounting High level of RF rejection Ultra low noise Wide dynamic range High strength heat treated steel mesh head SPECIFICATIONS  Acoustic Principle : Pressure Gradient Active Electronics : Valve/tube impedance converter with bipolar output buffer Capsule : 1.00" Polar Pattern : Cardioid Address Type : Side Frequency Range : 20Hz - 20kHz Output Impedance : 200O Maximum SPL : 158dBSPL Maximum Output Level : 29.0mV (@ 1kHz, 1% THD into 1KO load) Sensitivity : -38.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) : 12dBA Power Options : Power supply included Weight : 760.00g Dimensions : 208.00mmH x 55.00mmW x 55.00mmD Output : XLR Output  

Read more less

The NTR couples the legacy and history of microphone technology with the latest in precision manufacturing innovations to deliver one of the world's finest ribbon microphones. Featuring world-class active electronics and a revolutionary ribbon design delivering extended high-frequency response and sensitivity, the NTR is not your average ribbon microphone.       Key Features: Highly sensitive 1.8-micron ribbon element Bi-directional polar pattern Internal shock mounting system Custom designed transformer and active electronics Extended high-frequency response for superior versatility One free ribbon replacement during warranty period

Read more less

FEATURES Ideal for Rode VideoMic Series Accommodates Cold-Shoe Shotguns Boom Mountable with 3/8" Base SPECIFICATIONS Weight : 82.00g Dimensions : 132.00mmH x 34.00mmW x 43.00mmD Dimension Packaging Weight : 0.6 kg

Read more less

FEATURES Dual Rycote Lyre shockmounts reduce unwanted vibrations and handling noise Pistol-grip handle makes holding and positioning your mic easy Includes an integrated cable management clip Dimension Packaging Weight : 1.2 kg

Read more less

The PG2-R Pro Cable from RODE is designed for use with the PG2-R Pistol Grip and SM-series shockmounts (sold separately). It features Neutrik and Switchcraft XLR connectors and has an integrated strain-relief junction box. The cable length is 17".  Features For PG2-R Pistol Grip and SM Shockmounts Neutrik and Switchcraft XLR Connectors Strain-Relief Junction Box 17" Cable Length

Read more less

Key Features Premium magnetic mobile filmmaking cage Compatible with MagSafe® iPhones and other smartphones with a MagSafe-compatible case or accessory Four in-built cable management slots Five cold shoe mounts for attaching microphones and lights 1/4-inch and 3/8-inch threads for use with tripods, handles and other accessories Facilitates portrait and landscape shooting Made from high-grade aluminium – rugged and ultra-lightweight

Read more less

The RØDE Pivot Adaptor is a durable machined-aluminium, brass and high-grade polymer adaptor for mounting on boom stands and boompoles, allowing for up to 210 degrees of pivot. A 5/8" to 3/8" adaptor is included.PIVOT ADAPTOR SPECIFICATIONSWeight: 92.00gDimensions: 70.00mmH x 45.00mmW x 33.00mmD

Read more less

The RØDE Podcaster is a dynamic, end-address USB microphone that combines broadcast-quality audio with the simplicity of USB connectivity, allowing recording direct to a computer without the need for an additional digital interface.Including an audiophile quality 18-bit resolution, 48kHz sampling A/D converter, the Podcaster processes all of the analogue-to-digital conversion internally, bypassing the computer's lower quality on-board sound controller altogether.         A headphone output on the microphone body provides zero-latency monitoring, so the user can hear exactly what is being recorded, free of delay or echo.The Podcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.It is fully compatible with Windows 7, Windows 8 and Mac OS X computers, as well as several Linux distributions. The microphone is bus powered and features a status LED to indicate operation.         The Podcaster is ideal for podcasting, vodcasting, YouTube videos, voice recognition software, corporate videos and any production application that requires a simple yet professional voice-over microphone. It is also a convenient demo microphone for musicians and songwriters that prefer the convenience of a USB microphone but don't want to compromise sound quality.It can also be used as an iPad microphone for the Apple iPad (in conjunction with the iPad Camera Connection Kit and a powered USB hub) to provide high quality recording to various iPad audio applications such as Garageband.           IN THE BOX:   - Rode Podcaster - RM2 Ring-Mount - USB Cable (3m/10')       FEATURES   Broadcast Sound Quality 28mm dynamic capsule 18-bit resolution, 8-48kHz sampling Windows and Mac compatible Powered by USB bus Internal capsule shock mounting 3.5mm stereo headphone output with volume control built-in to body Ideal for voice recognition software       SPECIFICATIONS   Acoustic Principle: Dynamic Active Electronics: Analogue signal conditioning + A/D and USB interface Polar Pattern: Cardioid Resolution: 18-bit Sampling Rate: 8-48kHz Address Type: End Frequency Range: 40Hz – 14kHz Output USB: Output Output Impedance: 0O Maximum SPL: 115dB SPL (@ 1kHz, 1% THD into 1KO load) Sensitivity: -51.0dB re 1 Volt/Pascal (2.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz Power Options: USB bus powered Dimensions: 215 x 56 x 52 mm Weight: 655 g

Read more less

Searching for a broadcast-grade mic for podcasting? Rode’s PodMic delivers the silky, pro quality you demand. Whether your podcast requires raucous screaming or something more intimate, the PodMic will tackle it with ease, delivering a balanced, easy-to-listen-to sound that’s guaranteed to elevate your presentation. Enjoy plosive-free performance, thanks to an integrated pop shield. Benefit from durable, all-metal construction. If you want to capture top-notch vocals, you need a top-notch podcasting mic like the Rode PodMic.           IN THE BOX:   - Rode PodMic Dynamic Podcasting Microphone       FEATURES   Broadcast-grade mic for podcasters Tackles everything from raucous screaming to intimate reading Built-in pop shield minimizes unwanted plosives Robust, all-metal construction and rugged swing-arm mounting Integration with RODECaster Pro podcast production console       SPECIFICATIONS   Microphone Type:Dynamic Polar Pattern:Cardioid Frequency Range:50Hz-13kHz Output Impedance:320 ohms Sensitivity:1.6mV/Pa (-57dB) Color:Black Connector:XLR Dimensions:6.77" x 4.29" Weight:2.06 lbs.

Read more less

The PodMic USB is an ultra-versatile dynamic microphone ideal for podcasting, streaming, gaming, voice overs, and other speech applications for content creation. It delivers rich, full-bodied sound and features both an XLR and USB output for connecting to an audio interface or mixer like a classic broadcast microphone, or directly to a computer for plug-and-play recording. The digital USB output features RØDE’s ultra-low-noise, high-gain Revolution Preamp™ and powerful APHEX® digital signal processing for capturing studio-quality sound with ease, and a zero-latency headphone output complete with level control, making recording seamless. For even more versatility, the PodMic USB is also fully compatible with iOS and Android mobile devices, offering a high-quality portable podcasting or streaming solution.  Key Features: Broadcast-quality dynamic microphone Analog XLR and digital USB-C connectivity Fully compatible with Windows and Mac computers, and iOS and Android devices On-board DSP for advanced APHEX® audio processing Ultra-low-noise, high-gain Revolution Preamp™ Built-in headphone output with volume control and zero-latency monitoring Compatible with RØDE’s suite of software – RØDE Connect, RØDE Central, RØDE Capture and UNIFY Integrated swing mount for simple and secure positioning Internal pop filter for minimising plosives and internal shockmount to reduce vibrations Studio-quality external pop filter included Robust, all-metal construction – incredibly rugged and highly durable Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia

Read more less

The RØDE Procaster is a professional broadcast quality dynamic microphone, specifically designed to offer no-compromise performance for voice applications in the broadcast environment.Featuring a tight polar pattern and tailored-for-voice frequency response, the Procaster is perfect for every application where a great sounding, robust microphone with superior ambient noise rejection is demanded.         The Procaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.Its high output dynamic capsule and balanced low impedance output make it an ideal broadcast and voice over microphone.           IN THE BOX:   - Rode Procaster - RM2 Stand Mount - Padded Zip Pouch       FEATURES   Dynamic mic with XLR connection Ultra-low noise Cardioid polar pattern with high 180-degree rejection Voice tailored low-cut filter Internal pop filter Rugged stainless steel body       SPECIFICATIONS   Microphone Type:Dynamic Polar Pattern:Cardioid Frequency Response:75Hz-18kHz Output Impedance:320 ohms Color:Black Connector:XLR Weight:1.53 lbs.

Read more less

The RODE PSA1 studio boom arm is perfect for radio,broadcastor ,home use. Designed to fit unobtrusively into your studio this easy-to-use and continuously adjustable boom arm gives you full 360-degree access to your microphone with a stable horizontal and vertical reach of nearly three feet!    The PSA1 can easily accommodate microphones weighing up to 2.4 lbs.making it an ideal desk stand for most broadcast-style microphones. Hook-and-loop wraps keep your cables out of the way and a set of attachments provide multiple mounting options for your RODE PSA1 stand.   IN THE BOX: Rode PSA1 Studio Boom Arm for Broadcast Microphones     FEATURES   An ideal studio boom arm for radio,broadcast and home use Supports most broadcast-style microphone weighing between 1.5 lbs. and 2.4 lbs. such as the RODE Procaster or Podcaster Full 360-degree rotation gives makes positioning your microphone easy Maximum horizontal reach of up to 32" and maximum vertical reach of up to 33" provide ample desk coverage Supplied hook-and-loop wraps keep your mic cables tucked neatly out of the way Desk clamp attachment provides mounting to desks as thick as 2.16" Insert attachment provided for use with standard desk inserts up to 2.75" thick   SPECIFICATIONS   Base Type:Studio Boom Arm Height Type:Short Height:36" Tube Materials:Steel Manufacturer Part Number:PSA1 Dimension Packaging Weight : 3.0 kg

Read more less

The PSA1+ is the ultimate studio boom arm for podcasters, streamers and broadcasters. Its innovative parallelogram spring design ensures ultra-smooth movement and precise microphone placement in any position, while its fully damped internal springs and neoprene arm cover eliminate mechanical noise for completely silent operation. Integrated cable management ensures your setup is tidy and its extended reach and full 360-degree rotation make it easy to position your microphone exactly where it needs to be. Take your content to the next level.Key Features: Premium professional studio boom arm for podcasters, streamers, broadcasters, and creators Innovative parallelogram spring design for precise mic placement and ultra-smooth movement Fully damped springs for completely silent operation Superior isolation from keyboard, mouse and desk noise Integrated cable management for both USB and XLR cables Compatible with any microphone or shockmount using a standard thread, weighing between 94g and 1.2kg, including the NT-USB Mini, PodMic, Procaster, Podcaster, Broadcaster and more

Read more less

FEATURES Rotates 360 degrees with a maximum reach of 820mm (32.5 inches) horizontally and 840mm (33 inches) vertically 3/8 inch thread adaptor Holds up to 2Kg (4.4lbs) Includes two desk mounting options 2-axis swivel mount for accurate positioning SPECIFICATIONSManufacturer Part Number:PSM1Dimension Packaging Weight : 0.6 kg

Read more less

The PSA1+ is the ultimate studio boom arm for podcasters, streamers and broadcasters. Its innovative parallelogram spring design ensures ultra-smooth movement and precise microphone placement in any position, while its fully damped internal springs and neoprene arm cover eliminate mechanical noise for completely silent operation. Integrated cable management ensures your setup is tidy and its extended reach and full 360-degree rotation make it easy to position your microphone exactly where it needs to be. Take your content to the next level.  Key Features: Premium professional studio boom arm for podcasters, streamers, broadcasters, and creators Innovative parallelogram spring design for precise mic placement and ultra-smooth movement Fully damped springs for completely silent operation Superior isolation from keyboard, mouse and desk noise Integrated cable management for both USB and XLR cables Compatible with any microphone or shockmount using a standard thread, weighing between 94g and 1.2kg, including the NT-USB Mini, PodMic, Procaster, Podcaster, Broadcaster and more

Read more less

The RM1 is a rugged mic clip that is designed for mounting a variety of RØDE live performance microphones onto a stand. The RM1 effectively secures the microphone without interfering with its polarity or frequency response.Key Features Rugged mic clip Includes a 3/8 to 5/8-inch thread adaptor

Read more less

The RM2 is a low-profile professional stand mount for most RØDE large-diaphragm condenser microphones. It screws onto the bottom of the microphone providing an easy and convenient attachment system for your large-diaphragm condenser microphones.Key Features:Professional stand mount for large-diaphragm condenser microphonesIncludes a 3/8 to 5/8-inch thread adaptorSpecificationsMechanical SpecificationsWeight (g)   59Dimensions (mm)55 (H) x 102 (W) x 45 (D)

Read more less

Rode's essential Stand Mount for NT3, 4, and Other Condenser Microphones is a perfect fit for use at press conferences, for broadcast radio, and more, as it delivers tilt and swivel support.

Read more less

Rode's RM5 Stand Mount for the NT5 Microphone fits both NT55 and NT5 mics and lets you attach your small studio condenser to a standard microphone stand or boom pole.The RM5 includes a threaded insert that also adapts it for use with either standard 5/8" or 3/8" (1.6 or 0.95 cm) thread connectors.Mount Your MicWhy use your hands when a Stand Mount can hold your mic, providing the stability you need in the studio or on the set? Keep handling noise out of your recordings and maintain a consistent mic position for better results.Supports NT5 and NT55The Mic Stand Mount is designed to hold either Rode's NT5 or NT55 smaller 0.5" (1.27 cm) custom diameter condenser microphones.

Read more less

Compatible microphones : Stereo VideoMic The SMV Bag is designed to carry the Stereo VideoMic along with spare batteries, shock mount bands and other small accessories. It features an adjustable and removable strap, belt loops, and is made from durable n- Rode Bag-SVM Neoprene Belt Pouch for Stereo VideoMic with Spare Batteries, Shock Mount Bands & Accessories.

Read more less

Every content creator needs a good mixer. So why not get one that’s incredibly powerful, compact, and gives you plenty of bang for your buck? Live Music Centre is proud to introduce the RodeCaster Duo from RODE. This digital streaming mixer handles seven audio channels and has four physical faders. You get stereo I/O, thanks to two Neutrik combination inputs with low-noise Revolution preamps and stereo outs. Next, onboard APHEX processing and effects ensure that any user delivers a studio-quality sound. This mixer is packed with useful features, too. Six customizable SMART pads trigger sound effects and functions. At the same time, the onboard wireless receiver and Bluetooth connectivity cut down on cabling. Finally, the mixer has two USB-C interfaces, making it compatible with dual-PC setups.  Features:Compact and powerful production studio for podcasters and creatorsDual USB-C interfaces help the mixer integrate into any setup2 Neutrik combo inputs handle mics, instruments, and line-level sourcesRevolution preamps deliver 76dB of gain to drive stubborn microphones4 physical faders (plus 3 virtual faders) provide quick control of levelsOnboard APHEX DSP polishes your sound to perfection6 programmable SMART pads let you trigger sound effects and other featuresBuilt-in wireless receiver for connecting RODE Series IV wireless productsBluetooth connectivity supplies seamless audio streaming from a smartphone or tablet

Read more less

Every content creator needs a good mixer. So why not get one that’s incredibly powerful, compact, and gives you plenty of bang for your buck? Live Music Centre is proud to introduce the RodeCaster Duo from RODE. This digital streaming mixer handles seven audio channels and has four physical faders. You get stereo I/O, thanks to two Neutrik combination inputs with low-noise Revolution preamps and stereo outs. Next, onboard APHEX processing and effects ensure that any user delivers a studio-quality sound. This mixer is packed with useful features, too. Six customizable SMART pads trigger sound effects and functions. At the same time, the onboard wireless receiver and Bluetooth connectivity cut down on cabling. Finally, the mixer has two USB-C interfaces, making it compatible with dual-PC setups.  Features:Compact and powerful production studio for podcasters and creatorsDual USB-C interfaces help the mixer integrate into any setup2 Neutrik combo inputs handle mics, instruments, and line-level sourcesRevolution preamps deliver 76dB of gain to drive stubborn microphones4 physical faders (plus 3 virtual faders) provide quick control of levelsOnboard APHEX DSP polishes your sound to perfection6 programmable SMART pads let you trigger sound effects and other featuresBuilt-in wireless receiver for connecting RODE Series IV wireless productsBluetooth connectivity supplies seamless audio streaming from a smartphone or tablet

Read more less

The RØDECaster Pro II is the ultimate audio production solution for content creators, including streamers, podcasters and musicians. Combining revolutionary features with superior sound quality, endless customisability and unmatched ease of use, the RØDECaster Pro II is all you will ever need to record incredible audio for your content.  Key Features: Fully integrated audio production studio for streamers, podcasters, musicians and content creators Ultra-low-noise, high-gain Revolution Preamps™ (-131.5dBV EIN, 76dB gain) Four high-quality Neutrik® combo inputs for connecting microphones, instruments and line-level devices Nine individually assignable channels with six broadcast-quality physical faders and three virtual faders High-performance quad-core audio engine Studio-grade APHEX® audio processing and on-board effects Eight fully programmable SMART pads with bank switching Dual USB-C interfaces for connecting two computers or mobile devices Advanced Bluetooth® connectivity for high-quality phone call integration Multitrack or stereo recording to a microSD™ card, USB storage device or computer Four high-power headphone outputs and balanced ¼-inch line outputs 5.5-inch high-definition touchscreen with haptic feedback and rotary encoder for easy navigation and control New features and enhancements via regular firmware updates Designed and made in RØDE’s state-of-the-art facilities in Sydney, Australia

Read more less

The RØDECaster Video is a revolutionary all-in-one video and audio production console that provides intuitive control over every element of your content. Combining powerful video switching, recording and production capabilities with a fully integrated professional audio mixer, it offers a seamless way to streamline and supercharge your workflow for studio productions, video podcasts and interviews, and stream live events with broadcast quality. Features Switch between up to six video sources and seven fully customisable scenes at the press of a button High-performance octa-core CPU video and audio processor Four full HD (1080p) HDMI inputs with auto frame rate conversion and two configurable HDMI outputs for viewing program, preview and multiview Two flexible USB-C ports for connecting compatible webcams and RØDE USB audio devices to use as additional video and audio sources Two studio-grade Neutrik® combo jacks with ultra-low-noise, high-gain Revolution Preamps™ for capturing pristine audio from XLR microphones, instruments or any other audio source Dual internal wireless receivers for connecting RØDE Series IV wireless microphones Powerful APHEX® audio processing, including an EQ, compressor, noise gate, high-pass filter, de-esser and the legendary Aural Exciter™, Big Bottom™ and Compellor™ effects 2-inch high-resolution touchscreen and versatile rotary encoder for quick configuration and setting adjustment Ability to create seven complex scenes with multiple layers of video, media and graphics, which can be saved and triggered at the touch of a button Automatic chroma keying for effortlessly replacing backgrounds with media or live video inputs Media playback, graphic overlays, keying, transitions and multi-source scene creation all accessible from the front panel Innovative "Inspect" feature for quick-and-easy preview and configuration of any input or scene Intelligent auto-switching for seamless hands-free switching of video sources and scenes based on audio inputs Stream directly to all major platforms via Wi-Fi or Ethernet, or to streaming software via USB Record directly to external USB storage device, including isolated (ISO) recording for post-editing flexibility Remote control, user-assignable graphics and media, custom scene building, audio mixing and effects, and other advanced configuration options via RØDE Central Designed and made in RØDE’s state-of-the-art facilities in Sydney, Australia

Read more less

Quickly recharge two Rode TX-M2 microphones or Rode LB-1 batteries with the Rode RS-1 recharge station. The dual-dock configuration accommodates two TX-M2 wireless handheld microphones, two LB-1 batteries, or one of each. The sleek, compact desktop design is both sturdy and stable, making it ideal for use in a variety of locations.The RS-1 is powered by the included external power supply, and it utilizes a locking power connector to eliminate loss of power from accidental cable disconnection. The RS-1 can recharge an LB-1 battery in approximately two hours, and a TX-M2 microphone in about four hours. Compatible with the TX-M2 wireless handheld microphone and the LB-1 rechargeable lithium-ion batteryProvides rapid charging for two devices without using multiple cables or power outletsIdeal for users of the RODELink Performer Kit and the VideoMic Pro+

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE SELF PICKUP WITHIN KLANG VALLEY / KL AREA- Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option 'Standard Delivery' and all orders will be shipped out on timely manner.*Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A,Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6The RØDECaster Video S is a revolutionary all-in-one video and audio production console designed to deliver intuitive control over every element of your content. A compact version of the RØDECaster Video, it combines powerful video switching, recording and production capabilities with a fully integrated professional audio mixer. From video podcasts and studio productions to live streams and interviews, the RØDECaster Video S provides a seamless way to streamline and supercharge your workflow with broadcast-quality results.Specification: Video Sources: 4 HDMI Inputs: 3 UVC Inputs: 1 NDI Inputs: 4 Video Outputs: 1 × HDMI, 1 × UVC, 1 × NDI Recording: PGM at 1080p60 and 4 × ISO at 1080p30 Streaming: RTMP / RTMPS Keying / DSK / Auto Switching: Yes Preview & Program Layers: 9 Custom Scenes: 5 Total Audio Channels: 9 × Stereo Analogue Audio Inputs: 2 × Combo Jacks Analogue Audio Outputs: 2 × Headphones USB Audio Interfaces: 3 USB Audio Device Hosting: 1 Wireless Audio Receivers: 2 Ethernet / Wi-Fi / Bluetooth®: Yes Video Players: 2 Media Storage: 24 GB Internal (20 GB User Configurable) Remote Control (Ethernet / Wi-Fi / USB): Yes

Read more less

FEATURES A 20' extension cable for RODE's smartLav series microphones and other devices that use TRRS 1/8" connectors Gold-plated contacts ensure top-quality connectivity Compatible with smartLav/smartLav+ and many other microphones Dimension Packaging Weight : 0.12 kg

Read more less

The 12.6" Rode SC10 is a short TRRS cable specially designed for connecting a TRRS-equipped camera-mount microphone to a mirrorless camera, DSLR, or mobile device, making it a great accessory for vloggers, run-and-gun videographers, and mobile filmmakers.This high-quality cable features right-angle 3.5mm TRRS male connectors and two cable sections joined at a junction box. The mic-end section is extremely flexible to improve shockmount performance, while the camera end section utilizes reinforced memory cable to allow optimal positioning around your camera.The SC10 is perfect for use with the Rode VideoMic NTG and many other camera-mount microphones outfitted with TRRS connectors. For connecting a TRS-equipped microphone to the TRRS input of a mobile device, the Rode SC7 cable (available separately) is ideal. Designed for use with TRRS-equipped camera-mount microphones such as the VideoMic NTG High-quality shielded cable Integrated strain relief sleeve Junction box for cable management Compatible with the cable management slots in the Rode SM7-R and DCS-1 mounts 7.9" memory cable section 1.6" flex cable section

Read more less