FEATURES 250 W RMS power handling 131 dB max SPL 65 ÷ 20000 Hz frequency range 100° x 10° coverage angles Fully equipped with neodymium transducers Horn Loaded symmetric design Wooden reinforced polypropylene enclosure Steel grille with clothing 2 x SPEAKON connectors  HL 6 is two-way full range system, ideal when line array performance is needed, and a fast and easy set-up is a must. The concept of this speaker derives from the touring industry, bringing in a compact cabinet all the experience of RCF professional sound. HL 6 features state-of-the art RCF transducers, two powerful 6.0” woofers for a solid bass reproduction, plus a high powered 1.75” voice coil compression driver mounted on a precise 100° x 10° waveguide to deliver vocal clarity with high definition and incredible dynamic. Due to its symmetrical design the HL 6 produces constant coverage without break up or attenuation, maintaining intelligibility, definition, and signal strength over distance. HL 6 comes in a structurally wooden reinforced composite polypropylene enclosure, and it is equipped with two rear handles for portability.

Read more less

FEATURES 2 x 750 W Class-H Power Fast response and low distortion Stereo, parallel, bridge modes Extensive protection circuit Variable speed cooling system Signal, clip, fault led indicators XLR input connectors speakON and binding post output connectors Limiter on each channel IPS Series is a range of two channel professional amplifiers that combine the latest high-performing class-H power amplification technology with long-term reliability. IPS 1.5K is a 2-channel power amplifier that delivers up to 2 x 750 Watts at 4 Ohms s impedance. It features independent gain control, signal/clip and fault indicators, stereo XLR input and output link, stereo/parallel/bridge switch, speakON, and binding post output connectors. Moreover, it is protected against short circuits. Thanks to its high-efficiency heat sinks and variable speed fans, IPS 1.5K can withstand extreme heat conditions, ensuring complete reliability.

Read more less

FEATURES 2 x 1250 W Class-H Power Fast response and low distortion Stereo, parallel, bridge modes Extensive protection circuit Variable speed cooling system Signal, clip, fault led indicators XLR input connectors speakON and binding post output connectors Limiter on each channel IPS Series is a range of two channel professional amplifiers that combine the latest high-performing class-H power amplification technology with long-term reliability. IPS 2.5K is a 2-channel power amplifier that delivers up to 2 x 1250 Watts at 4 Ohms impedance. It features independent gain control, signal/clip and fault indicators, stereo XLR input and output link, stereo/parallel/bridge switch, speakON, and binding post output connectors. Moreover, it is protected against short circuits. Thanks to its high-efficiency heat sinks and variable speed fans, IPS 2.5K can withstand extreme heat conditions, ensuring complete reliability.

Read more less

FEATURES 2 x 2600 W Class-H power Fast response and low distortion Stereo, parallel, bridge modes Extensive protection circuit Variable speed cooling system Signal, clip, fault led indicators XLR input connectors SpeakON and binding post output connectors Limiter on each channel  IPS Series is a range of two channel professional amplifiers that combine the latest high-performing class-H power amplification technology with long-term reliability. IPS 5.0K is a 2-channel power amplifier that delivers up to 2 x 2600 Watts at 4 Ohms impedance. It features independent gain control, signal/clip and fault indicators, stereo XLR input and output link, stereo/parallel/bridge switch, speakON, and binding post output connectors. Moreover, it is protected against short circuits. Thanks to its high-efficiency heat sinks and variable speed fans, IPS 5.0K can withstand extreme heat conditions, ensuring complete reliability.

Read more less

FEATURES 200 W RMS power handling 126 dB max SPL 100 ÷ 20000 Hz frequency range 150° x 30° constant directivity coverage angle 6 x 5" woofers 4 x 1" dome tweeters Baltic birch plywood cabinet Speech enhancer filter Built-in wall mounting accessories  The L2406-T is a full range high intelligibility compact 3 way column speaker array with vertical controlled directivity for medium to large size installations. It is equipped with six 5" woofers and four 1" dome tweeters mounted in front of the two central woofers. This particular design permits coherent sound dispersion minimizing lobing in a very compact enclosure. The two central woofers are controlled differently from the other four because of the tweeters in front of them, in order to improve the directivity providing a true cardioid column operation.The wide coverage horizontal angle and the controlled vertical dispersion allow correct sound reproduction serving a wide area and assistance in limiting feedback and reverberated sound. A speech filter can be activated for enhancing the voice frequencies and improving speech intelligibility. The crossover is designed to avoid secondary lobing creation. Mounting accessories are provided and are designed to keep the column as close as possible to the wall and simplify the installation allowing suitable tilting. The L2406-T can be used connected to a low impedance amplifier to handle 200 W RMS power. It also includes a 60 W line transformer for 100 V systems. The crossover is equipped with a circuit to protect the four 1" dome tweeters.

Read more less

FEATURES High Quality 2-way passive loudspeaker 1 x 5.5" woofer, vented 1 x 1" in driver, on 90°x90° CD horn High Power Handling ‘Low Impedance Compensated Crossover', with electronic protection for the driver 80W AES power handling Steel Front Grille with robust double mesh polyester clothing Rotatable RCF front logo Installation points are available on the rear panel, top and bottom All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)  M 501 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 501 suitable for almost any environment and architectural constraint. Its comfortable sound helps heavily in the near field applications. Available mounting accessories allow you to use the M 501 wall or ceiling mounted, with reference to the several possible applications. The SPL and the level of undistorted sound the M501 can reach are far above any expectation from such a compact solution. The M 501 features high sensitivity typical of the PRO audio cabinets thanks to the use of oversized magnets and an HI-FI sound quality with smooth and wide frequency response performed thanks to the wave-guided titanium dome tweeter. The LICC crossover design includes a protection on high frequency device.

Read more less

FEATURES High Quality 2-way passive loudspeaker 2 x 5.5" woofer, vented 1 x 1" in driver, on 90°x90° CD horn High Power Handling ‘Low Impedance Compensated Crossover', with electronic protection for the driver 100W AES power handling Steel Front Grille with robust double mesh polyester clothing Rotatable RCF front logo Installation points are available on the rear panel, top and bottom All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)   M 502 is a multipurpose two-way twin-woofer full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 502 suitable for almost any environment and architectural constraint. Available mounting accessories allow you to use the M 502 wall or ceiling mounted, with reference to the several possible applications. The M 502 has a controlled coverage through its twin 5" and the precise constant directivity horn. The SPL and the level of undistorted sound the M 502 can reach is far above any expectation from such a compact solution. The M 502 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded with a constant directivity horn. The LICC crossover design includes an electronic protection on high frequency device.

Read more less

FEATURES High Quality 2-way passive loudspeaker 2 x 6.5" woofer, vented 1 x 1" in driver, on 90°x90° CD horn High Power Handling ‘Low Impedance Compensated Crossover', with electronic protection for the driver 120W AES power handling Steel Front Grille with robust double mesh polyester clothing Rotatable RCF front logo Installation points are available on the rear panel, top and bottom All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)  M 602 is a multipurpose two-way twin-woofer full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 602 suitable for almost any environment and architectural constraint. Available mounting accessories allow you to use the M 602 wall or ceiling mounted, with reference to the several possible applications. The M 602 has a controlled coverage through its twin 6" and the precise constant directivity horn. The SPL and the level of undistorted sound the M 602 can reach is far above any expectation from such a compact solution. The M 602 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded with a constant directivity horn. The LICC crossover design includes an electronic protection on high frequency device.

Read more less

FEATURES High Precision Volume Knob Distortionless Passive Attenuation Circuitry Rugged Metal Construction 2 IN x 2 OUT Stereo Controller/Switcher   The MC-1 is a professional passive volume controller with two selectable Combo XLR/TRS stereo inputs, two selectable XLR stereo outputs, built with passive circuitry and a high-quality volume trim. With its ergonomic design and metal knob and chassis, the MC-1 is a robust desktop monitor controller that is silent and colorless, ideal for Recording Facilities, Home Studios, and Entertainment Rooms.

Read more less

FEATURES 5" woofer with 1" dome tweeter Power selectable (100 V): 30 W – 20 W – 10 W – 5 W 91 dB sensitivity Colour white RAL 9016 and black RAL 9005 Self-extinguishing plastic frame and back can, steel grille In/out euroblock connectors  Compact design, light weight and limited depth makes the MQ 50C a 2-way ceiling speakers ideal for use in any background and foreground music system where a good sound is required. The woofer is a high-excursion, PP coated paper cone with rubber surround design mounted in a tuned enclosure. The fabric dome tweeter is loaded on a constant Q wave guide to provide natural and smooth sound reproduction on a wide dispersion angle. Installation of MQ 50C is fast and efficient thanks to the built-in rotating hooks. No additional brackets or rings or other supports are required: thanks to its lightweight construction the speaker can be mounted as a conventional ceiling speakers. Connections are made on four poles Euroblock connector. Power value can be selected with a rotary switch, accessible behind the grill.

Read more less

FEATURES 5" woofer with 1" dome tweeter Power selectable (100 V): 30 W – 20 W – 10 W – 5 W 91 dB sensitivity Colour white RAL 9016 and black RAL 9005 Self-extinguishing plastic frame and back can, steel grille In/out euroblock connectors  Compact design, light weight and limited depth makes the MQ 50C a 2-way ceiling speakers ideal for use in any background and foreground music system where a good sound is required. The woofer is a high-excursion, PP coated paper cone with rubber surround design mounted in a tuned enclosure. The fabric dome tweeter is loaded on a constant Q wave guide to provide natural and smooth sound reproduction on a wide dispersion angle. Installation of MQ 50C is fast and efficient thanks to the built-in rotating hooks. No additional brackets or rings or other supports are required: thanks to its lightweight construction the speaker can be mounted as a conventional ceiling speakers. Connections are made on four poles Euroblock connector. Power value can be selected with a rotary switch, accessible behind the grill.

Read more less

FEATURES 5" woofer with 1" compression driver Power selectable (100 V): 30 W – 10 W – 10 W – 5 W 94 dB sensitivity Colour white RAL 9016 and black RAL 7021 Plastic body, steel grille Protection grade IP 55  High intelligibility, high efficiency and compact design make the RCF MQ80P 2-way horn-loaded sound projector speaker system the ideal solution to get clear voice and music reproduction in mid-size environment. Suitable for PA systems and background/foreground music systems. Thanks to its 90° X 60°constant directivity and to simple accessories it can be combined in clusters of 2 or more pieces to get wide and smooth coverage and to reduce the installation points. It is suitable for both indoor and outdoor installations (IP 55). The woofer is a high-excursion, PP coated paper cone – rubber surround design mounted in a tuned enclosure (port can be sealed for full outdoor installation). The tweeter is a horn-loaded compression driver with phase plug, the only way to get real and crispy intelligible voice reproduction even in wide and noisy environments. Installation of the MQ80P is quick thanks to the unique bracket with several fixing points and aiming facilities.Connections are made by a multi-pole cable. Wattage taps and voltage adjustments together with 8-ohm operation are selectable by means of a Rotary switch, accessible under a sealed cover. The enclosure is constructed of high density UV resistant self-extinguishing polystyrene with robust steel grill.

Read more less

FEATURES 5" woofer with 1" compression driver Power selectable (100 V): 30 W – 10 W – 10 W – 5 W 94 dB sensitivity Colour white RAL 9016 and black RAL 7021 Plastic body, steel grille Protection grade IP 55  High intelligibility, high efficiency and compact design make the RCF MQ80P 2-way horn-loaded sound projector speaker system the ideal solution to get clear voice and music reproduction in mid-size environment. Suitable for PA systems and background/foreground music systems. Thanks to its 90° X 60°constant directivity and to simple accessories it can be combined in clusters of 2 or more pieces to get wide and smooth coverage and to reduce the installation points. It is suitable for both indoor and outdoor installations (IP 55). The woofer is a high-excursion, PP coated paper cone – rubber surround design mounted in a tuned enclosure (port can be sealed for full outdoor installation). The tweeter is a horn-loaded compression driver with phase plug, the only way to get real and crispy intelligible voice reproduction even in wide and noisy environments. Installation of the MQ80P is quick thanks to the unique bracket with several fixing points and aiming facilities.Connections are made by a multi-pole cable. Wattage taps and voltage adjustments together with 8-ohm operation are selectable by means of a Rotary switch, accessible under a sealed cover. The enclosure is constructed of high density UV resistant self-extinguishing polystyrene with robust steel grill.

Read more less

FEATURES 2 x 3.5" woofer, 2 x 3.5 midrange and 2 x 0.75 dome tweeter Power selectable (100 V): 40 W – 20 W – 10 W – 5 W 93 dB sensitivity Colour white RAL 9016 and black RAL 9005 Plastic body, steel grille   MQ 100L (available in black and white) is a 3 way column loudspeaker providing natural hi-fi delity sound of both speech and music, suitable for sound system having fixed loudspeakers where the environment is acoustically critical or with architectural constraints. The wide horizontal coverage angle (180°) and the vertical dispersion (60°) allow the correct sound reproduction in a wide space, in order to limit feedback and improve the sound directivity which is important, for instance, in halls having a long reverberation time. The mounting accessories are included. These have been engineered to keep the column as close as possible to the wall and simplify the installation. Its tilt angle can be chosen among 0° – 5° – 10°. The 60° vertical dispersion is asymmetric: it is the difference between 20° upwards and 40° downwards. The vertical dispersion axis is in fact already angled 10° downwards, making it unnecessary to tilt the sound column excessively.

Read more less

FEATURES 2 x 3.5" woofer, 2 x 3.5 midrange and 2 x 0.75 dome tweeter Power selectable (100 V): 40 W – 20 W – 10 W – 5 W 93 dB sensitivity Colour white RAL 9016 and black RAL 9005 Plastic body, steel grille   MQ 100L (available in black and white) is a 3 way column loudspeaker providing natural hi-fi delity sound of both speech and music, suitable for sound system having fixed loudspeakers where the environment is acoustically critical or with architectural constraints. The wide horizontal coverage angle (180°) and the vertical dispersion (60°) allow the correct sound reproduction in a wide space, in order to limit feedback and improve the sound directivity which is important, for instance, in halls having a long reverberation time. The mounting accessories are included. These have been engineered to keep the column as close as possible to the wall and simplify the installation. Its tilt angle can be chosen among 0° – 5° – 10°. The 60° vertical dispersion is asymmetric: it is the difference between 20° upwards and 40° downwards. The vertical dispersion axis is in fact already angled 10° downwards, making it unnecessary to tilt the sound column excessively.

Read more less

FEATURES 40 W (8 ohm) power handling 108 dB max SPL 70 ÷ 20000 Hz frequency range 110° x 100° coverage angles 1 x 4" woofer (1’’ v.c.) 1 x 1" neodyminum dome tweeter (0.8’’ v.c.) Colour black RAL 9005 and white RAL 9003 IP 55 protection grade Swivel Wall mount accessory included 4 pole EUROBLOCK connector   MR 40 is a bass-reflex two-way speaker designed to deliver uncompromised audio performance and high reliability in fixed installations. Blend in with any environment and deliver deep bass, smooth midrange, and finely-detailed high-frequency response. Quality components and careful acoustic design make the MR 40 the perfect speaker for listening in demanding applications. Suitable for indoor and outdoor installation.

Read more less

FEATURES 40 W (8 ohm) power handling 108 dB max SPL 70 ÷ 20000 Hz frequency range 110° x 100° coverage angles 1 x 4" woofer (1’’ v.c.) 1 x 1" neodyminum dome tweeter (0.8’’ v.c.) Colour black RAL 9005 and white RAL 9003 IP 55 protection grade Swivel Wall mount accessory included 4 pole EUROBLOCK connector   MR 40 is a bass-reflex two-way speaker designed to deliver uncompromised audio performance and high reliability in fixed installations. Blend in with any environment and deliver deep bass, smooth midrange, and finely-detailed high-frequency response. Quality components and careful acoustic design make the MR 40 the perfect speaker for listening in demanding applications. Suitable for indoor and outdoor installation.

Read more less

FEATURES 40 W (8 ohm) / 20 W - 10 W - 5 W - 2.5 W (70/100V) power handling 108 dB max SPL 70 ÷ 20000 Hz frequency range 110° x 100° coverage angles 1 x 4" woofer (1’’ v.c.) 1 x 1" neodymium dome tweeter (0.8’’ v.c.) Colour black RAL 9005 and white RAL 9003 IP 55 protection grade Swivel wall mount accessory included 4 pole EUROBLOCK connector     MR 40T is a bass-reflex two-way speaker designed to deliver uncompromised audio performance and high reliability in fixed installations. Blend in with any environment and deliver deep bass, smooth midrange, and finely-detailed high-frequency response. Quality components and careful acoustic design make MR 40T the perfect speaker for listening in the most demanding applications. Suitable for indoor and outdoor installation.

Read more less

FEATURES 40 W (8 ohm) / 20 W - 10 W - 5 W - 2.5 W (70/100V) power handling 108 dB max SPL 70 ÷ 20000 Hz frequency range 110° x 100° coverage angles 1 x 4" woofer (1’’ v.c.) 1 x 1" neodymium dome tweeter (0.8’’ v.c.) Colour black RAL 9005 and white RAL 9003 IP 55 protection grade Swivel wall mount accessory included 4 pole EUROBLOCK connector     MR 40T is a bass-reflex two-way speaker designed to deliver uncompromised audio performance and high reliability in fixed installations. Blend in with any environment and deliver deep bass, smooth midrange, and finely-detailed high-frequency response. Quality components and careful acoustic design make MR 40T the perfect speaker for listening in the most demanding applications. Suitable for indoor and outdoor installation.

Read more less

 FEATURES 60 W (8 ohm) / 40 W - 20 W - 10 W - 5 W (70/100V) power handling 110 dB max SPL 60 ÷ 20000 Hz frequency range 110° x 100° coverage angles 1 x 5" woofer (1’’ v.c.) 1 x 1" neodymium dome tweeter (0.8’’ v.c.) Colour black RAL 9005 and white RAL 9003 IP 55 protection grade Swivel wall mount accessory included 4 pole EUROBLOCK connector MR 50T is a bass-reflex two-way speaker designed to deliver uncompromised audio performance and high reliability in fixed installations. Blend in with any environment and deliver deep bass, smooth midrange, and finely-detailed high-frequency response. Quality components and careful acoustic design make MR 50T the perfect speaker for listening in the most demanding applications. Suitable for indoor and outdoor installation. 

Read more less

FEATURES 60 W (8 ohm) power handling 110 dB max SPL 60 ÷ 20000 Hz frequency range 110° x 100° coverage angles 1 x 5" woofer (1’’ v.c.) 1 x 1" neodymium dome tweeter (0.8’’ v.c.) Colour black RAL 9005 and white RAL 9003 IP 55 protection grade Swivel wall mount accessory included 4 pole EUROBLOCK connector  MR 50 is a bass-reflex two-way speaker designed to deliver uncompromised audio performance and high reliability in fixed installations. Blend in with any environment and deliver deep bass, smooth midrange, and finely-detailed high-frequency response. Quality components and careful acoustic design make MR 50 the perfect speaker for listening in the most demanding applications. Suitable for indoor and outdoor installation.

Read more less

FEATURES 60 W (8 ohm) power handling 110 dB max SPL 60 ÷ 20000 Hz frequency range 110° x 100° coverage angles 1 x 5" woofer (1’’ v.c.) 1 x 1" neodymium dome tweeter (0.8’’ v.c.) Colour black RAL 9005 and white RAL 9003 IP 55 protection grade Swivel wall mount accessory included 4 pole EUROBLOCK connector  MR 50 is a bass-reflex two-way speaker designed to deliver uncompromised audio performance and high reliability in fixed installations. Blend in with any environment and deliver deep bass, smooth midrange, and finely-detailed high-frequency response. Quality components and careful acoustic design make MR 50 the perfect speaker for listening in the most demanding applications. Suitable for indoor and outdoor installation.

Read more less

FEATURES 800 Watt Peak, 400 Watt RMS digital bi-amplification 127 dB max spl 60° x 60° constant directivity horn 10" High power neodymium woofer, 2.5" voice coil 1.7 kapton dome, 1" exit, neodymium high frequency driver DSP processing, floor - fre field equalization, soft limiter and protection Combo xlr/jack input, xlr signal output  The NX 10-SMA is equipped with new high power 400 W digital amplifier and a newly designed 10 " coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system. The NX 10-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes: - Floor, for stage monitoring; - Free Field, for the use of the speakers as a stand-alone PA system. Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road. An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.

Read more less

FEATURES 1400 Watt Peak, 700 Watt RMS digital bi-amplification 129 dB max spl 60° x 60° constant directivity horn 12" High power neodymium woofer, 2.5" voice coil 1.7" kapton dome, 1" exit, neodymium high frequency driver DSP processing, floor - fre field equalization, soft limiter and protection Combo xlr/jack input, xlr signal output  The NX 12-SMA is equipped with new high power 700 W digital amplifier and a newly designed 12” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system. The NX 12-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes: - Floor, for stage monitoring; - Free Field, for the use of the speakers as a stand-alone PA system. Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road. An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.

Read more less

FEATURES 1400 Watt Peak, 700 Watt RMS digital bi-amplification 130 dB max spl 60° x 60° constant directivity horn 15" High power neodymium woofer, 2.5" voice coil 1.7" kapton dome, 1" exit, neodymium high frequency driver DSP processing, floor - fre field equalization, soft limiter and protection Combo xlr/jack input, xlr signal output The NX 15-SMA is equipped with new high power 700 W digital amplifier and a newly designed 15” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system. The NX 15-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:- Floor, for stage monitoring; Free Field, for the use of the speakers as a stand-alone PA system.Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6FEATURES 1400 W 2-way class-D amplifier 131 dB SPL Max 50 – 20000 Hz Frequency Range 90° x 60° constant directivity coverage 12" woofer, 2.5" voice coil Horn loaded 3.0''neodymium c. driver Multiple rigging points The NX 32-A is an active speaker specifically designed to be the everyday tool for rental companies and professional musicians. It’s one of the most flexible speaker for deploying high-quality sound as a stand-alone FOH system or as a satellite (with subwoofer) but either as a stage monitor or a or a front, down or side fill speaker.

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6FEATURES 1400 W 2-way class-D amplifier 133 dB SPL Max 45 – 20000 Hz Frequency Range 90° x 50° constant directivity coverage 15" neodymium woofer, 3.5" voice coil Horn loaded 4.0''neodymium c. driver Multiple rigging points  The NX 45-A is an active speaker specifically designed to be the everyday tool for rental companies and professional musicians. It’s one of the most flexible speaker for deploying high-power and pristine sound as a stand-alone FOH system or as a satellite (with subwoofer) but either as a stage monitor or a front, down or side fill speaker.

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6FEATURES Up to 130 dB Sound Pressure Level 2100W Class-D Bi-Amplification 50-20000 Hz linear frequency response 1.75" Compression Driver 10" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management  NX 910-A is masterfully engineered from the ground up to deliver stellar audio performance for solo musicians, bands, and DJs. The combination of 1.75" compression driver, 10" woofer, two-channel 2100W amplifier, and a constant directivity waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL of distortion-free sound. Used as a stand-alone speaker for a FOH system, satellite (with subwoofer), stage monitor, or flown speaker, the NX 910-A blends high-performance and reliability in a compact package. Blending RCF proprietary FiRPHASE and Bass Motion Control DSP processing, NX 9 Series speakers are perfectly tuned for each model, delivering absolute clarity and deep, powerful bass response. The tour-ready, rugged all-wood cabinet is easy to carry and secure to install on a pole-, flown-, wall-, or truss-mounted using the dedicated rigging points available.

Read more less

FEATURES Up to 130 dB Sound Pressure Level 2100W Class-D bi-amplification 50-20000 Hz linear frequency response 1.75" Compression Driver 12" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management 70°x100° Constant Directivity Coverage Angle Perfectly tailored for horizontal or vertical deployment SPECIFICATIONS ACOUSTICAL SPECIFICATIONS Frequency Response 50 Hz ÷ 20000 Hz Max SPL @ 1m 130 dB Horizontal coverage angle 100° Vertical coverage angle 70° TRANSDUCERS Compression Driver 1 x 1.0'', 1.75'' v.c Woofer 12'', 2.5'' v.c INPUT/OUTPUT SECTION Input signal bal/unbal Input connectors Combo XLR/Jack Output connectors XLR Input sensitivity -2 dBu/+4 dBu PROCESSOR SECTION Crossover Frequencies 1600 Hz Protections Thermal, RMS Limiter Soft Limiter POWER SECTION Total Power 2100 W Peak High frequencies 700 W Peak Low frequencies 1400 W Peak Cooling Convection Connections Powercon TRUE1 TOP IN/OUT STANDARD COMPLIANCE Safety agency CE compliant PHYSICAL SPECIFICATIONS Handles 1 on side and 1 on top Pole mount/Cap Yes Color Black SIZE Height 320 mm / 12.6 inches Width 620 mm / 24.41 inches Depth 394 mm / 15.51 inches Weight 20 kg / 44.09 lbs Dimension Packaging Weight : 14.0 kg

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6FEATURES Up to 131 dB Sound Pressure Level 2100W Class-D Bi-Amplification 45-20000 Hz linear frequency response 1.75" Compression Driver 15" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management  NX 915-A is masterfully engineered from the ground up to deliver stellar audio performance for solo musicians, bands, and DJs. The combination of 1.75" compression driver, 15" woofer, two-channel 2100W amplifier, and a constant directivity waveguide produces coherent 100° x 60° coverage for the listening area with up to 131 dB SPL, distortion-free sound. Used stand-alone speaker for FOH system, satellite (with subwoofer), stage monitor, or flown speaker, the NX 915-A blends high-performance and reliability in a compact package. Blending RCF proprietary FiRPHASE and Bass Motion Control DSP processing, NX 9 Series speakers are perfectly tuned for each model, delivering absolute clarity and deep, powerful bass response. The tour-ready, rugged all-wood cabinet is easy to carry and secure to install on a pole-, flown-, wall-, or truss-mounted using the dedicated rigging points available.

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6FEATURES Up to 132 dB Sound Pressure Level 2100W Class-D Bi-Amplification 45-20000 Hz linear frequency response 3" Titanium/Neodymium Compression Driver 12" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management Six M10 and four Quick Lock rigging points SPECIFICATIONS ACOUSTICAL SPECIFICATIONS Frequency Response 45 Hz ÷ 20000 Hz Max SPL @ 1m 132 dB Horizontal coverage angle 100° Vertical coverage angle 70° TRANSDUCERS Compression Driver 1 x 1.4'' neo, 3.0'' v.c Woofer 12'', 2.5'' v.c INPUT/OUTPUT SECTION Input signal bal/unbal Input connectors Combo XLR/Jack Output connectors XLR Input sensitivity -2 dBu/+4 dBu PROCESSOR SECTION Crossover Frequencies 700Hz Protections Thermal, RMS Limiter Soft Limiter Controls Linear, Boost, Stage, Volume POWER SECTION Total Power 2100 W Peak High frequencies 700 W Peak Low frequencies 1400 W Peak Cooling Convection Connections Powercon TRUE1 TOP IN/OUT STANDARD COMPLIANCE Safety agency CE compliant PHYSICAL SPECIFICATIONS Hardware 2 x M10 Top, 1 x M10 each side, 1 x M10 bottom, 1 x M10 rear 2 each side quick lock pin seat Handles 1 x Side Pole mount/Cap Yes Color Black, White SIZE Height 620 mm / 24.41 inches Width 362 mm / 14.25 inches Depth 405 mm / 15.94 inches Weight 22.9 kg / 50.49 lbs Dimension Packaging Weight : 26.0 kg

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6FEATURES Up to 132 dB Sound Pressure Level 2100W Class-D Bi-Amplification 45-20000 Hz linear frequency response 3" Titanium/Neodymium Compression Driver 12" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management Six M10 and four Quick Lock rigging points SPECIFICATIONS ACOUSTICAL SPECIFICATIONS Frequency Response 45 Hz ÷ 20000 Hz Max SPL @ 1m 132 dB Horizontal coverage angle 100° Vertical coverage angle 70° TRANSDUCERS Compression Driver 1 x 1.4'' neo, 3.0'' v.c Woofer 12'', 2.5'' v.c INPUT/OUTPUT SECTION Input signal bal/unbal Input connectors Combo XLR/Jack Output connectors XLR Input sensitivity -2 dBu/+4 dBu PROCESSOR SECTION Crossover Frequencies 700Hz Protections Thermal, RMS Limiter Soft Limiter Controls Linear, Boost, Stage, Volume POWER SECTION Total Power 2100 W Peak High frequencies 700 W Peak Low frequencies 1400 W Peak Cooling Convection Connections Powercon TRUE1 TOP IN/OUT STANDARD COMPLIANCE Safety agency CE compliant PHYSICAL SPECIFICATIONS Hardware 2 x M10 Top, 1 x M10 each side, 1 x M10 bottom, 1 x M10 rear 2 each side quick lock pin seat Handles 1 x Side Pole mount/Cap Yes Color Black, White SIZE Height 620 mm / 24.41 inches Width 362 mm / 14.25 inches Depth 405 mm / 15.94 inches Weight 22.9 kg / 50.49 lbs Dimension Packaging Weight : 26.0 kg

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6FEATURES Up to 132 dB Sound Pressure Level 2100W Class-D Bi-Amplification 45-20000 Hz linear frequency response 3" Titanium/Neodymium Compression Driver 12" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management Six M10 and four Quick Lock rigging points SPECIFICATIONS ACOUSTICAL SPECIFICATIONS Frequency Response 45 Hz ÷ 20000 Hz Max SPL @ 1m 132 dB Horizontal coverage angle 100° Vertical coverage angle 70° TRANSDUCERS Compression Driver 1 x 1.4'' neo, 3.0'' v.c Woofer 12'', 2.5'' v.c INPUT/OUTPUT SECTION Input signal bal/unbal Input connectors Combo XLR/Jack Output connectors XLR Input sensitivity -2 dBu/+4 dBu PROCESSOR SECTION Crossover Frequencies 700Hz Protections Thermal, RMS Limiter Soft Limiter Controls Linear, Boost, Stage, Volume POWER SECTION Total Power 2100 W Peak High frequencies 700 W Peak Low frequencies 1400 W Peak Cooling Convection Connections Powercon TRUE1 TOP IN/OUT STANDARD COMPLIANCE Safety agency CE compliant PHYSICAL SPECIFICATIONS Hardware 2 x M10 Top, 1 x M10 each side, 1 x M10 bottom, 1 x M10 rear 2 each side quick lock pin seat Handles 1 x Side Pole mount/Cap Yes Color Black, White SIZE Height 620 mm / 24.41 inches Width 362 mm / 14.25 inches Depth 405 mm / 15.94 inches Weight 22.9 kg / 50.49 lbs Dimension Packaging Weight : 38.0 kg

Read more less

SAME DAY DELIVERY / INSTALLATION SERVICE & SELF PICKUP WITHIN KLANG VALLEY / KL AREA - Please select shipping option 'Own Courier' for same day delivery / self-collect at showroom- Third party pickup charges to be beared by buyer- Kindly put a remark for self collection / Lalamove in your order- installation request (Piano and Drum) which is available within Klang Valley / KL area (Additional Charges)EAST MALAYSIA ORDERS- Sea Shipping will be arranged for bulky items, usually takes 3-4 weeks timeFOR STANDARD DELIVERYPlease select shipping option  'Standard Delivery' and all orders will be shipped out on timely manner. *Kindly take note that the courier services are beyond our control, estimated delivery time is around 2-7 working daysWaze: Live Music CentreNo 20 & 20-1 & 22 & 22A, Jalan BRP 1/6, Bukit Rahman Putra, 47000 Sungai Buloh, SelangorContact : 0-1-6-5-2-0-1-0-6-6FEATURES Up to 132 dB Sound Pressure Level 2100W Class-D Bi-Amplification 45-20000 Hz linear frequency response 3" Titanium/Neodymium Compression Driver 12" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management Six M10 and four Quick Lock rigging points SPECIFICATIONS ACOUSTICAL SPECIFICATIONS Frequency Response 45 Hz ÷ 20000 Hz Max SPL @ 1m 132 dB Horizontal coverage angle 100° Vertical coverage angle 70° TRANSDUCERS Compression Driver 1 x 1.4'' neo, 3.0'' v.c Woofer 12'', 2.5'' v.c INPUT/OUTPUT SECTION Input signal bal/unbal Input connectors Combo XLR/Jack Output connectors XLR Input sensitivity -2 dBu/+4 dBu PROCESSOR SECTION Crossover Frequencies 700Hz Protections Thermal, RMS Limiter Soft Limiter Controls Linear, Boost, Stage, Volume POWER SECTION Total Power 2100 W Peak High frequencies 700 W Peak Low frequencies 1400 W Peak Cooling Convection Connections Powercon TRUE1 TOP IN/OUT STANDARD COMPLIANCE Safety agency CE compliant PHYSICAL SPECIFICATIONS Hardware 2 x M10 Top, 1 x M10 each side, 1 x M10 bottom, 1 x M10 rear 2 each side quick lock pin seat Handles 1 x Side Pole mount/Cap Yes Color Black, White SIZE Height 620 mm / 24.41 inches Width 362 mm / 14.25 inches Depth 405 mm / 15.94 inches Weight 22.9 kg / 50.49 lbs Dimension Packaging Weight : 38.0 kg

Read more less

FEATURES Up to 138 dB Sound Pressure Level 2100W Class-D Amplifier 40-20000 Hz linear frequency response 1.75" Neodymium Compression Driver with Peek diaphragm 8" Midrange, 2.5" v.c. 15" High Power Woofer Bass Motion Control and FiRPHASE processing M10 Rigging Points IP Rated Powercon TRUE1 TOP IN/OUT SPECIFICATIONS ACOUSTICAL SPECIFICATIONS Frequency Response 40 Hz ÷ 20000 Hz Max SPL @ 1m 138 dB Horizontal coverage angle 100° Vertical coverage angle 60° TRANSDUCERS Compression Driver 1 x 1.0'' neo, 1.75'' v.c Midrange 8'' neo, 2.5'' v.c Woofer 15'', 3.0'' v.c INPUT/OUTPUT SECTION Input signal bal/unbal Input connectors Combo XLR/Jack Output connectors XLR Input sensitivity -2 dBu/+4 dBu PROCESSOR SECTION Crossover Frequencies Bass/Mid:320Hz, Mid/High:1200Hz Protections Thermal, Excurs., RMS Limiter Soft Limiter Controls Linear, 2 Speakers, High Pass, Volume POWER SECTION Total Power 2100 W Peak High frequencies 200 W Peak Mid frequencies 500 W Peak Low frequencies 1400 W Peak Cooling Convection Connections Powercon TRUE1 TOP IN/OUT STANDARD COMPLIANCE Safety agency CE compliant PHYSICAL SPECIFICATIONS Hardware 3 x M10 Top, 1 x M10 each side, 1 x M10 bottom, 2 x M10 rear Handles 1 x Side Color Black SIZE Height 1075 mm / 42.32 inches Width 461 mm / 18.15 inches Depth 475 mm / 18.7 inches Weight 45 kg / 99.21 lbs Dimension Packaging Weight : 60.0 kg

Read more less

FEATURES Up to 132 dB Sound Pressure Level 2100W Class-D Amplifier 100° x 30° Constant Directivity Coverage Angle 3" Titanium Neodymium Compression Driver 4 x 6" High Power Neodymium Woofers 60-20000 Hz linear Frequency Response Bass Motion Control and FiRPHASE processing 4 x M8 Rigging Points and 4 x Quick Lock  NXL 24-A MK2 is a line array column speaker masterfully engineered from the ground up to deliver stellar audio performance for Bands, DJs, Clubs, and Rental Companies. The best-in-class combination of premium RCF transducers and a 2100W two-channel amplifier produce coherent 100° x 30° coverage for the listening area with up to 132 dB. The two-way design features four 6” neodymium woofers and a 3” driver on an asymmetrical waveguide. The horn’s design delivers accurate sound to the coverage area without tilting the enclosure. The speaker delivers an extended frequency range down to 60 Hz and can be used as a stand-alone speaker, flown, or coupled with another NXL 24-A MK2 for extended coverage. Pairing the speaker with subwoofers delivers full-range power for medium-sized concerts and DJ systems. Blending RCF proprietary FiRPHASE and Bass Motion Control DSP processing, the NXL 24-A MK2 speaker is perfectly tuned for absolute sound clarity and deep, powerful bass response. The rugged, tour-ready, high-quality baltic birch plywood cabinet is easy to carry and installed securely using the dedicated rigging points.

Read more less

Features Up to 135 dB Sound Pressure Level 2100W Class-D Amplifier 100° x 50° Constant Directivity Coverage Angle 3" Titanium Neodymium Compression Driver 3 x 10" High Power Neodymium Woofers 45-20000 Hz linear Frequency Response Bass Motion Control and FiRPHASE processing 8 x M8 Rigging Points and 8 x Quick Lock IP Rated Powercon TRUE1 TOP IN/OUT NXW 44-A is a column speaker masterfully engineered from the ground up to deliver stellar audio performance for bands, DJs, nightclubs, and rental companies. The best-in-class combination of premium RCF transducers and a 2,100W two-channel amplifier produces coherent 100° x 50° coverage for the listening area up to 135 dB SPL. The two-way design features three 10” neodymium woofers and a CMD horn-loaded 3” compression driver. The Constant Matching Design horn delivers accurate sound to the coverage area without tilting the cabinet. The speaker delivers an extended frequency range down to 45 Hz and can be used as a stand-alone speaker, flown or pole-mounted. Pairing the speaker with a subwoofer delivers full-range power for medium-sized concerts and high-powered DJ systems. Blending RCF proprietary FiRPHASE and Bass Motion Control DSP processing, the NXW 44-A speaker is tuned for absolute sound clarity and deep, powerful bass response. The rugged, tour-ready, high-quality baltic birch plywood enclosure is easy to carry and installed securely using dedicated rigging points

Read more less

FEATURES 121 dB Max SPL, 100W RMS Weatherproof cabinet IP 55 with UV protection 100 V line transformer 90° x 60° constant directivity horn Rotomoulded cabinet available in grey or white Built-in passive LICC crossover with AMCDP protection 1 x 8" woofer with 1.5" voice coil 1 x 1.4" voice coil RCF Precision neodymium compression driver  The P 1108T is a weatherproof full range, two-way speaker, suitable for a variety of professional indoor or outdoor applications. The high-frequency section includes a constant directivity CMD horn-loaded enclosure with a 1.4" voice coil RCF Precision neodymium compression driver for smooth, highly-controlled coverage. The low-frequency section features a 8" woofer with a 1.5" voice coil. The P 1108T also features a selectable line transformer for 100 V applications, with built-in LICC crossover, and Active Mosfet Compression Driver Protection (AMCDP). The single-piece rotomolded cabinet is fully UV protected and is equipped with M8 (4x) brass inserts and one electroplated steel U-bracket. The aluminum grille cover is powder coated with a water-repellent backing material, and a rotatable logo plate. The P 1108T meets IP 55 standard requirements (International Protection Rating).

Read more less

FEATURES 121 dB Max SPL, 100W RMS Weatherproof cabinet IP 55 with UV protection 100 V line transformer 90° x 60° constant directivity horn Rotomoulded cabinet available in grey or white Built-in passive LICC crossover with AMCDP protection 1 x 8" woofer with 1.5" voice coil 1 x 1.4" voice coil RCF Precision neodymium compression driver  The P 1108T is a weatherproof full range, two-way speaker, suitable for a variety of professional indoor or outdoor applications. The high-frequency section includes a constant directivity CMD horn-loaded enclosure with a 1.4" voice coil RCF Precision neodymium compression driver for smooth, highly-controlled coverage. The low-frequency section features a 8" woofer with a 1.5" voice coil. The P 1108T also features a selectable line transformer for 100 V applications, with built-in LICC crossover, and Active Mosfet Compression Driver Protection (AMCDP). The single-piece rotomolded cabinet is fully UV protected and is equipped with M8 (4x) brass inserts and one electroplated steel U-bracket. The aluminum grille cover is powder coated with a water-repellent backing material, and a rotatable logo plate. The P 1108T meets IP 55 standard requirements (International Protection Rating).

Read more less

FEATURES 124 dB SPL Max, 200W RMS Weatherproof IP55 cabinet with UV protection Line transformer 90° x 40° CMD constant directivity horn 10" high-output LF transducer with 2.5" voice coil RCF Precision 1" C. Driver with 1.5" voice coil 12 brass suspension points (M10) Roto-moulded single piece cabinet  The P 2110T is a weatherproof full-range, wide-dispersion, coaxial two-way loudspeaker system for a variety of professional indoor or outdoor applications. The speaker can be installed individually or coupled in array configurations. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The high-frequency section combines a 1” RCF Precision compression driver with a 1.5” diaphragm assembly centrally-mounted in the throat of the LF driver, and loaded on a constant directivity CMD horn for smooth, wide dispersion. The P 2110T features a selectable line transformer for 70 - 100 volt applications, built-in LICC crossover, and Active Mosfet Compression Driver Protection (AMCDP). The single-piece roto-molded cabinet is fully UV protected and meets IP-55 standard requirements. Included are M10 brass inserts (12 x) and one durable corrosion-resistant 316P stainless steel U-Bracket with spacers (2x) for 90° mounting. The aluminum grille cover is powder coated with water-repellent backing material and a rotatable logo plate.

Read more less

FEATURES 125 dB Max SPL, 300W RMS Weatherproof IP55 cabinet with UV protection Rotomoulded single piece cabinet 90° x 60° constant directivity horn 1 x 8" woofer with 2.5" voice coil 1 x 1.5" voice coil RCF Precision compression driver Built-in LICC crossover with AMCDP protection Amphenol IP67 4 pole input connector  The P 3108 is a weatherproof full range, two-way speaker, suitable for a variety of professional indoor or outdoor applications. The speaker can be installed individually or coupled in array configurations.The high-frequency section includes two constant directivity CMD horns, each loaded with a 1" RCF Precision neodymium compression driver, and a 1.5" diaphragm assembly. The low-frequency section combines two 8" woofers with a 2.5" voice coil. The symmetrical arrangement of the transducers delivers a controlled horizontal dispersion. Internal circuitry provides LICC crossover and Active Mosfet Compression Driver Protection (AMCDP). The single-piece roto-molded cabinet is fully UV protected and meets IP 55 standard requirements, equipped with M8 (4x) brass inserts and one corrosion-resistant 316P stainless steel U-bracket. Connections to the amplifier are made through a watertight multi-pole connector. The front aluminum grille cover is powder coated with a water-repellent backing material, with a rotatable logo plate.

Read more less

FEATURES 129 dB Max SPL, 400W RMS Weatherproof cabinet IP55 with UV protection Rotomoulded cabinet available in white or black 110° x 60° constant directivity horn Built-in passive LICC crossover with AMCDP protection 2 x 8" woofer with 2.5" voice coil 1 x 2.5" voice coil RCF Precision neodymium compression driver Amphenol IP67 4 pole input connector  The P 4228 is a weatherproof full range, two-way speaker, suitable for a variety of professional indoor or outdoor applications. The speaker can be installed individually or coupled in array configurations. The high-frequency section includes two constant directivity CMD horns, each loaded with a 1.4" RCF Precision neodymium compression driver with a 2.5" diaphragm assembly for smooth, highly controlled coverage. The low-frequency section combines two 8" woofers with a 2.5" voice coil. The symmetrical arrangement of the transducers delivers a controlled horizontal dispersion. Internal circuitry provides LICC crossover and Active Mosfet Compression Driver Protection (AMCDP). The single-piece roto-molded cabinet is fully UV protected and meets IP 55 standard requirements, equipped with M8 brass inserts (4x) and one corrosion-resistant 316P stainless steel U-bracket. Connections to the amplifier are made through a watertight multi-pole connector. The aluminum grille cover is powder coated with water-repellent backing material and has a rotatable logo plate.

Read more less

FEATURES 129 dB Max SPL, 400W RMS Weatherproof cabinet IP55 with UV protection Rotomoulded cabinet available in white or black 110° x 60° constant directivity horn Built-in passive LICC crossover with AMCDP protection 2 x 8" woofer with 2.5" voice coil 1 x 2.5" voice coil RCF Precision neodymium compression driver Amphenol IP67 4 pole input connector  The P 4228 is a weatherproof full range, two-way speaker, suitable for a variety of professional indoor or outdoor applications. The speaker can be installed individually or coupled in array configurations. The high-frequency section includes two constant directivity CMD horns, each loaded with a 1.4" RCF Precision neodymium compression driver with a 2.5" diaphragm assembly for smooth, highly controlled coverage. The low-frequency section combines two 8" woofers with a 2.5" voice coil. The symmetrical arrangement of the transducers delivers a controlled horizontal dispersion. Internal circuitry provides LICC crossover and Active Mosfet Compression Driver Protection (AMCDP). The single-piece roto-molded cabinet is fully UV protected and meets IP 55 standard requirements, equipped with M8 brass inserts (4x) and one corrosion-resistant 316P stainless steel U-bracket. Connections to the amplifier are made through a watertight multi-pole connector. The aluminum grille cover is powder coated with water-repellent backing material and has a rotatable logo plate.

Read more less

FEATURES 131 dB Max SPL, 500W RMS Weatherproof IP55 cabinet with UV protection Rotomoulded single piece cabinet 90° x 20° constant directivity horn 2 x 8" woofer with 2.5" voice coil 2 x 1.75" voice coil RCF Precision neodymium compression drivers Built-in LICC crossover with AMCDP protection Amphenol IP67 4 pole input connector  The P 5228-L is a weatherproof full range, two-way speaker, suitable for a variety of professional applications. The speaker can be installed individually or coupled in array configurations. The high-frequency section includes two constant directivity CMD horns, each loaded with a 1" RCF Precision neodymium compression driver with a 1.75" diaphragm assembly for smooth, highly controlled 20° vertical coverage. The low-frequency section combines two 8" woofers with a 2.5" voice coil. The symmetrical arrangement of the transducers delivers a controlled horizontal dispersion with consistent directivity. Internal circuitry provides LICC crossover and Active Mosfet Compression Driver Protection (AMCDP). The single-piece roto-molded cabinet is fully UV protected and meets IP 55 standard requirements, equipped with M8 brass inserts (4x) and a corrosion-resistant 316P stainless steel U-bracket. Connections to the amplifier are made through a watertight multi-pole connector. The front aluminum grille is powder coated with water-repellent backing material and has a rotatable logo plate.

Read more less

FEATURES 134 dB SPL Max, 600W RMS Weatherproof IP55 cabinet with UV protection Rotomoulded cabinet available in white or black 60° x 60° conical CMD horn One 15" high-output neodymium LF transducer One RCF Precision 2.5" neodymium C. Driver Active Mosfet Compression Driver Protection 12 brass suspension points (M10)  The P 6215 is a weatherproof full range, wide-dispersion, coaxial two-way loudspeaker system for very high output and long-throw applications. The speaker can be installed individually or coupled in array configurations. The low-frequency transducer is a 15” neodymium woofer, the high-frequency section combines a 1.3” neodymium RCF Precision compression driver with a 2.5” diaphragm assembly centrally mounted in the throat of the LF driver and loaded on a constant directivity CMD horn for smooth, wide dispersion. Internal circuit provides low crossover frequency for accurate vocal intelligibility and Active Mosfet Compression Driver Protection (AMCDP). The single-piece roto-molded cabinet is fully UV protected and meets IP-55 standard requirements, equipped with M10 brass inserts (12x), and one durable and corrosion-resistant 316P stainless steel U-Bracket with f spacers (2x) for 90° mounting. The aluminum grille cover is powder coated with water-repellent backing material and has a rotatable logo plate.

Read more less

FEATURES 134 dB SPL Max, 600W RMS Weatherproof IP55 cabinet with UV protection Rotomoulded cabinet available in white or black 60° x 60° conical CMD horn One 15" high-output neodymium LF transducer One RCF Precision 2.5" neodymium C. Driver Active Mosfet Compression Driver Protection 12 brass suspension points (M10)  The P 6215 is a weatherproof full range, wide-dispersion, coaxial two-way loudspeaker system for very high output and long-throw applications. The speaker can be installed individually or coupled in array configurations. The low-frequency transducer is a 15” neodymium woofer, the high-frequency section combines a 1.3” neodymium RCF Precision compression driver with a 2.5” diaphragm assembly centrally mounted in the throat of the LF driver and loaded on a constant directivity CMD horn for smooth, wide dispersion. Internal circuit provides low crossover frequency for accurate vocal intelligibility and Active Mosfet Compression Driver Protection (AMCDP). The single-piece roto-molded cabinet is fully UV protected and meets IP-55 standard requirements, equipped with M10 brass inserts (12x), and one durable and corrosion-resistant 316P stainless steel U-Bracket with f spacers (2x) for 90° mounting. The aluminum grille cover is powder coated with water-repellent backing material and has a rotatable logo plate.

Read more less

FEATURES 800 W RMS power handling 132 dB max SPL 50 Hz ÷ 200 Hz frequency range 15" neodymium woofer, 4.0" v.c. Weatherproof IP55 cabinet with UV protection Aluminum grille AISI 316L stainless steel bracket 12 suspension points (M10)  P 8015S is a weatherproof bass reflex subwoofer equipped with a 15" low-frequency neodymium transducer with a 4" voice coil offering power and efficiency for a variety of professional outdoor or indoor applications. The P 8015S has been specifically designed to reinforce the low-frequency range in P Series speakers array systems. The single-piece roto-molded cabinet is fully UV protected and meets IP-55 standard requirements (International Protection Rating), equipped with M10 brass inserts (12x) and a durable and corrosion-resistant stainless steel U-Bracket and spacers (2x) for 90° mounting. The aluminum grille cover is powder coated with a water-repellent fabric backing.

Read more less