{"title":"FBT","description":"\u003cp\u003eShop the full range of FBT professional audio and PA systems available at Live Music Malaysia.\u003c\/p\u003e","products":[{"product_id":"fbt-j5-5-inch-passive-speaker-80w-16-ohms-each-pair-white-j5-j5","title":"FBT J5 5 inch Passive Speaker, 80W @ 16 Ohms - Each \/ Pair - White ( J5 \/ J5 )","description":"\u003cp\u003eThe FBT J5 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAvailable in black or white finish the FBT J5 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWith the use of optional accessories the FBT J5 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe FBT J5 is of two way design incorporating an 5\" low frequency woofer and 1\" HF custom compression driver. Cabinet dispersion is 90°H x 90°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 3.5kHz. With a frequency range of 90Hz - 20kHz the FBT J5 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 117dB.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eA front face steel grille protects the speaker from external damage.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIdeal for small fixed installations the FBT J5 speaker system have an impedance of 16 Ohm allowing four FBT J5 speakers to be utilised per channel, for a total of eight J5 speakers when used with a stereo power amplifier capable of operating at 4 Ohm. The two M6 fly points built into the cabinets along with the optional mounting brackets allow the FBT J5 speakers to be surface mounted on walls or ceiling.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFor portable or fixed use the FBT J5 speakers can be mounted on mic stands by using the optional adapters for vertical mounting. Rear panel connections feature both a female 1\/4\" input jack and push pin terminal connectors which are internally connected in parallel providing various wiring options for the installer. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way passive sound reinforcement system\u003c\/li\u003e\n\u003cli\u003ePolypropylene enclosure\u003c\/li\u003e\n\u003cli\u003e1 x 5\" custom woofer\u003c\/li\u003e\n\u003cli\u003e1 x 1\" neodymium silk dome tweeter\u003c\/li\u003e\n\u003cli\u003e80W RMS recommended amplifier\u003c\/li\u003e\n\u003cli\u003e40W long term power\u003c\/li\u003e\n\u003cli\u003e160W short term power IEC 268-5\u003c\/li\u003e\n\u003cli\u003e2 x M6 suspension points\u003c\/li\u003e\n\u003cli\u003eInternal passive crossover filter\u003c\/li\u003e\n\u003cli\u003eInput panel with jack and terminal connector\u003c\/li\u003e\n\u003cli\u003eAvailable in white color\u003c\/li\u003e\n\u003cli\u003eCompletely manufactured in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899453714688,"sku":"J5WH-Each","price":1400.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899453747456,"sku":"J5WH-Pair","price":2800.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j8-passive-160wrms-loud-speaker-each-pair-black-j-8-j-8","title":"FBT J8 Passive 160Wrms Loud Speaker - Each \/ Pair - Black ( J 8 \/ J-8 )","description":"\u003cp\u003eThe FBT J8 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J8 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWith the use of optional accessories the FBT J8 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe FBT J8 is of two way design incorporating an 8\" low frequency woofer and 1\" HF custom compression driver. Cabinet dispersion is 90°H x 60°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 2.5kHz. With a frequency range of 65Hz - 20kHz the FBT J8 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 121.5dB.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong fr-original-style=\"\"\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way passive sound reinforcement system\u003c\/li\u003e\n\u003cli\u003ePolypropylene enclosure\u003c\/li\u003e\n\u003cli\u003e1 x 8\" custom woofer\u003c\/li\u003e\n\u003cli\u003e1 x 1\" high frequency driver\u003c\/li\u003e\n\u003cli\u003e160W RMS recommended amplifier\u003c\/li\u003e\n\u003cli\u003e80W long term power\u003c\/li\u003e\n\u003cli\u003e320W short term power IEC 268-5\u003c\/li\u003e\n\u003cli\u003e2 x M6 suspension points\u003c\/li\u003e\n\u003cli\u003eInternal passive crossover filter\u003c\/li\u003e\n\u003cli\u003eInput panel with 2xSpeakon NL4\u003c\/li\u003e\n\u003cli\u003eAvailable in white colour\u003c\/li\u003e\n\u003cli\u003eCompletely manufactured in Italy\u003c\/li\u003e\n\u003cli\u003e96.5dB Sensitivity\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899453780224,"sku":"J8BK-Each","price":2400.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899453812992,"sku":"J8BK-Pair","price":4800.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j-8a-processed-active-monitor-200w-50w-rms-each-pair-black-j-8a-j8a","title":"FBT J 8A Processed Active Monitor 200W +50W RMS - Each \/ Pair - Black ( J-8A \/ J8A )","description":"\u003cp\u003eThe black \u003cstrong\u003eJ 8A Processed Active Monitor\u003c\/strong\u003e from \u003cstrong\u003eFBT\u003c\/strong\u003e is a two-way 8\" 200W+50W RMS professional speaker with 2 DSP presets. It can be used in various environments for applications such as live stage, theater, clubs, gyms, bars, and more. It features a frequency response of 60 Hz to 20 kHz and is designed with an on-board digital signal processor to adjust the dynamic range and to protect high SPL during performance.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe built-in class D amplifier for the J 8A uses 200W RMS for the low frequency driver and 50W RMS for the 1\" AF compression driver. The polypropylene enclosure houses the 2-way bass-reflex speaker and also the 90 x 60° directivity horn. The speaker is built with two M6 anchoring points for attaching to a wall and has a built-in integrated carry handle. Also, an AC power cable is included.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eHigh efficiency switch mode power supply\u003c\/p\u003e\u003cp\u003eFeatures a 8\" (203 mm) woofer with improved efficiency and linearity with a 1\" (25mm) HF compression driver\u003c\/p\u003e\u003cp\u003eOn-board digital signal processing with protection for high SPL and high reliability during performance\u003c\/p\u003e\u003cp\u003e2 DSP presets for maximum acoustical flexibility\u003c\/p\u003e\u003cp\u003ePolypropylene enclosure with integrated handles\u003c\/p\u003e\u003cp\u003e2x M6 anchoring points\u003c\/p\u003e","brand":"FBT","offers":[{"title":"J8ABK-Each","offer_id":48899453845760,"sku":"J8ABK-Each","price":4300.0,"currency_code":"MYR","in_stock":true},{"title":"J8ABK-Pair","offer_id":48899453878528,"sku":"J8ABK-Pair","price":8600.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j-8a-processed-active-monitor-200w-50w-rms-each-pair-white-j-8a-j8a","title":"FBT J 8A Processed Active Monitor 200W +50W RMS - Each \/ Pair - White ( J-8A \/ J8A )","description":"\u003cp\u003eThe black \u003cstrong\u003eJ 8A Processed Active Monitor\u003c\/strong\u003e from \u003cstrong\u003eFBT\u003c\/strong\u003e is a two-way 8\" 200W+50W RMS professional speaker with 2 DSP presets. It can be used in various environments for applications such as live stage, theater, clubs, gyms, bars, and more. It features a frequency response of 60 Hz to 20 kHz and is designed with an on-board digital signal processor to adjust the dynamic range and to protect high SPL during performance.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe built-in class D amplifier for the J 8A uses 200W RMS for the low frequency driver and 50W RMS for the 1\" AF compression driver. The polypropylene enclosure houses the 2-way bass-reflex speaker and also the 90 x 60° directivity horn. The speaker is built with two M6 anchoring points for attaching to a wall and has a built-in integrated carry handle. Also, an AC power cable is included.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eHigh efficiency switch mode power supply\u003c\/p\u003e\u003cp\u003eFeatures a 8\" (203 mm) woofer with improved efficiency and linearity with a 1\" (25mm) HF compression driver\u003c\/p\u003e\u003cp\u003eOn-board digital signal processing with protection for high SPL and high reliability during performance\u003c\/p\u003e\u003cp\u003e2 DSP presets for maximum acoustical flexibility\u003c\/p\u003e\u003cp\u003ePolypropylene enclosure with integrated handles\u003c\/p\u003e\u003cp\u003e2x M6 anchoring points\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899453911296,"sku":"J8AWH-Each","price":4300.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899453944064,"sku":"J8AWH-Pair","price":8600.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j8-passive-160wrms-loud-speaker-each-pair-white-j-8-j-8","title":"FBT J8 Passive 160Wrms Loud Speaker - Each \/ Pair - White ( J 8 \/ J-8 )","description":"\u003cp\u003eThe FBT J8 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J8 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWith the use of optional accessories the FBT J8 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe FBT J8 is of two way design incorporating an 8\" low frequency woofer and 1\" HF custom compression driver. Cabinet dispersion is 90°H x 60°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 2.5kHz. With a frequency range of 65Hz - 20kHz the FBT J8 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 121.5dB.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong fr-original-style=\"\"\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way passive sound reinforcement system\u003c\/li\u003e\n\u003cli\u003ePolypropylene enclosure\u003c\/li\u003e\n\u003cli\u003e1 x 8\" custom woofer\u003c\/li\u003e\n\u003cli\u003e1 x 1\" high frequency driver\u003c\/li\u003e\n\u003cli\u003e160W RMS recommended amplifier\u003c\/li\u003e\n\u003cli\u003e80W long term power\u003c\/li\u003e\n\u003cli\u003e320W short term power IEC 268-5\u003c\/li\u003e\n\u003cli\u003e2 x M6 suspension points\u003c\/li\u003e\n\u003cli\u003eInternal passive crossover filter\u003c\/li\u003e\n\u003cli\u003eInput panel with 2xSpeakon NL4\u003c\/li\u003e\n\u003cli\u003eAvailable in white colour\u003c\/li\u003e\n\u003cli\u003eCompletely manufactured in Italy\u003c\/li\u003e\n\u003cli\u003e96.5dB Sensitivity\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899453976832,"sku":"J8WH-Each","price":2400.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899454009600,"sku":"J8WH-Pair","price":2400.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j12-12-inch-passive-speaker-300w-8-ohms-each-pair-j-12-j-12","title":"FBT J12 12 Inch Passive Speaker, 300w @ 8 Ohms - Each \/ Pair ( J 12 \/ J-12 )","description":"\u003cp\u003eProduct DescriptionThe FBT J12 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBT J12 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J12 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor. The FBT J12 is of two way design incorporating an 12\" low frequency woofer and 1\" HF custom driver. Cabinet dispersion is 90°H x 60°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 2kHz. With a frequency range of 55Hz - 20kHz the FBT J12 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 127dB. A front face steel grille protects the speaker from external damage. Ideal for fixed installations the FBT J12 speaker system have an impedance of 8 Ohm. The two M10 fly points built into the cabinets along with the optional mounting brackets allow the FBT J12 speakers to be surface mounted on walls or ceiling. For portable or fixed use the FBT J12 speakers can be mounted on mic stands by using the optional adapters for vertical mounting. Rear panel connections feature 2 x Neutrik Speakon NL4.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way passive sound reinforcement system\u003c\/li\u003e\n\u003cli\u003ePolypropylene enclosure\u003c\/li\u003e\n\u003cli\u003e1 x 12\" custom woofer\u003c\/li\u003e\n\u003cli\u003e1 x 1\" high frequency driver\u003c\/li\u003e\n\u003cli\u003e300W RMS recommended amplifier\u003c\/li\u003e\n\u003cli\u003e150W long term power\u003c\/li\u003e\n\u003cli\u003e600W short term power IEC 268-5\u003c\/li\u003e\n\u003cli\u003e2 x M10 suspension points\u003c\/li\u003e\n\u003cli\u003eInternal passive crossover filter\u003c\/li\u003e\n\u003cli\u003eInput panel with\u003c\/li\u003e\n\u003cli\u003e2 x Speakon NL4 Completely manufactured in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899454075136,"sku":"J12BK-Each","price":3500.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899454107904,"sku":"J12BK-Pair","price":7000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j-12a-processed-active-monitor-speaker-300w-100w-rms-each-pair-j12a-j-12a","title":"FBT J 12A Processed Active Monitor Speaker 300W +100W RMS - Each \/ Pair ( J12A \/ J-12A )","description":"\u003cp\u003eThe \u003cstrong\u003eJ 12A Processed Active Monitor\u003c\/strong\u003e from \u003cstrong\u003eFBT\u003c\/strong\u003e is a two-way 12\" 350W+100W RMS professional speaker with 4 DSP presets. It can be used in various environments for applications such as live stage, theater, clubs, gyms, bars, and more. It features a frequency response of 50 Hz to 20 kHz and is designed with an on-board digital signal processor to adjust the dynamic range and to protect high SPL during performance.\u003c\/p\u003e\u003cp\u003eThe built-in class D amplifier for the J 12A uses 350W RMS for the low frequency driver and 100W RMS for the 1\" high frequency driver. The polypropylene enclosure houses the 2-way bass-reflex speaker and also the 90 x 60° directivity horn. The speaker is built with two M10 anchoring points for attaching to a wall and has a built-in integrated carry handle. An AC power cable is included.\u003c\/p\u003e\u003cp\u003eThe asymmetrical shape of the FBT J12A cabinet also allows use as a powered floor stage monitor\u003c\/p\u003e\u003cp\u003eHigh efficiency switch mode power supply\u003c\/p\u003e\u003cp\u003eFeatures a 12\" (305 mm) woofer with improved efficiency and linearity with a 1\" (25mm) HF compression driver\u003c\/p\u003e\u003cp\u003eOn-board digital signal processing with protection for high SPL and high reliability during performance\u003c\/p\u003e\u003cp\u003e4 DSP presets for maximum acoustical flexibility\u003c\/p\u003e\u003cp\u003ePolypropylene enclosure with integrated handles\u003c\/p\u003e\u003cp\u003e2x M10 anchoring points\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899454140672,"sku":"J12A-Each","price":6200.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899454173440,"sku":"J12A-Pair","price":12400.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j15-15-inch-passive-speaker-300w-8-ohms-each-pair-j-15-j-15","title":"FBT J15 15 inch Passive Speaker, 300W @ 8 Ohms - Each \/ Pair ( J 15 \/ J-15 )","description":"\u003cp\u003eThe FBT J15 15 inch Passive Speaker is a passive speaker featuring a 15 inch Driver and a 1 inch Compression driver, this italian made speaker features a rugged gas injected molded polypropylene cabinet and Speakon connections.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe FBT J15 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J15 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J15 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe FBT J15 is of two way design incorporating an 15 inch low frequency woofer and 1 inch HF custom driver. Cabinet dispersion is 90°H x 60°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 1.8kHz. With a frequency range of 50Hz - 20kHz the FBT J15 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 127dB.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eA front face steel grille protects the speaker from external damage. Ideal for fixed installations the FBT J15 speaker system have an impedance of 8 Ohm.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe two M10 fly points built into the cabinets along with the optional mounting brackets allow the FBT J15 speakers to be surface mounted on walls or ceiling. For portable or fixed use the FBT J15 speakers can be mounted on mic stands by using the optional adapters for vertical mounting. Rear panel connections feature 2 x Neutrik Speakon NL4.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- 2-way passive sound reinforcement system\u003cbr\u003e- Polypropylene enclosure\u003cbr\u003e- 1 x 15 inch custom woofer\u003cbr\u003e- 1 x 1 inch high frequency driver\u003cbr\u003e- 300W RMS recommended amplifier\u003cbr\u003e- 150W long term power\u003cbr\u003e- 600W short term power IEC 268-5\u003cbr\u003e- 2 x M10 suspension points\u003cbr\u003e- Internal passive crossover filter\u003cbr\u003e- Input panel with 2 x Speakon NL4\u003cbr\u003e- Available in white color\u003cbr\u003e- Completely manufactured in Italy\u003cbr\u003e- 99dB Sensitivity\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899454206208,"sku":"J15-Each","price":4000.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899454238976,"sku":"J15-Pair","price":8000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j-5a-processed-active-monitor-speaker-80w-40w-rms-white-each-pair-j5a-j-5a","title":"FBT J 5A Processed Active Monitor Speaker 80W + 40W RMS - White - Each \/ Pair ( J5A \/ J-5A )","description":"\u003cp\u003eThe black \u003cstrong\u003eJ 5A Processed Active Monitor\u003c\/strong\u003e from \u003cstrong\u003eFBT\u003c\/strong\u003e is a two-way 5\" 80W+40W RMS professional speaker with a 1\" neodymium silk dome tweeter. It can be used in various environments for applications such as theater, clubs, gyms, bars, and more. It features a frequency response of 80 Hz to 20 kHz and is designed with an on-board analog signal processor and limiter to protect the monitor from overloads during performance.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe built-in class D amplifier for the J 5A uses 80W RMS for the low frequency driver and 40W RMS for the 1\" high frequency driver. The 2-way bass-reflex speaker is built with two M6 suspension points for attaching to a wall. An AC power cord is included.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFeatures a 5\" (130mm) woofer with improved efficiency and linearity with a 1\" (25mm) neodymium silk dome tweeter\u003c\/p\u003e\u003cp\u003eLow noise toroidal transformer power supply\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899454271744,"sku":"J5AW-Each","price":2800.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899454304512,"sku":"J5AW-Pair","price":5600.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j5-5-inch-passive-speaker-80w-16-ohms-each-pair-black-j5-j5","title":"FBT J5 5 inch Passive Speaker, 80W @ 16 Ohms - Each \/ Pair - Black ( J5 \/ J5 )","description":"\u003cp\u003eThe FBT J5 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAvailable in black or white finish the FBT J5 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWith the use of optional accessories the FBT J5 speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe FBT J5 is of two way design incorporating an 5\" low frequency woofer and 1\" HF custom compression driver. Cabinet dispersion is 90°H x 90°V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 3.5kHz. With a frequency range of 90Hz - 20kHz the FBT J5 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 117dB.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eA front face steel grille protects the speaker from external damage.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIdeal for small fixed installations the FBT J5 speaker system have an impedance of 16 Ohm allowing four FBT J5 speakers to be utilised per channel, for a total of eight J5 speakers when used with a stereo power amplifier capable of operating at 4 Ohm. The two M6 fly points built into the cabinets along with the optional mounting brackets allow the FBT J5 speakers to be surface mounted on walls or ceiling.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFor portable or fixed use the FBT J5 speakers can be mounted on mic stands by using the optional adapters for vertical mounting. Rear panel connections feature both a female 1\/4\" input jack and push pin terminal connectors which are internally connected in parallel providing various wiring options for the installer. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way passive sound reinforcement system\u003c\/li\u003e\n\u003cli\u003ePolypropylene enclosure\u003c\/li\u003e\n\u003cli\u003e1 x 5\" custom woofer\u003c\/li\u003e\n\u003cli\u003e1 x 1\" neodymium silk dome tweeter\u003c\/li\u003e\n\u003cli\u003e80W RMS recommended amplifier\u003c\/li\u003e\n\u003cli\u003e40W long term power\u003c\/li\u003e\n\u003cli\u003e160W short term power IEC 268-5\u003c\/li\u003e\n\u003cli\u003e2 x M6 suspension points\u003c\/li\u003e\n\u003cli\u003eInternal passive crossover filter\u003c\/li\u003e\n\u003cli\u003eInput panel with jack and terminal connector\u003c\/li\u003e\n\u003cli\u003eAvailable in white color\u003c\/li\u003e\n\u003cli\u003eCompletely manufactured in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899454337280,"sku":"J5BK-Each","price":1400.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899454370048,"sku":"J5BK-Pair","price":2800.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j-5a-processed-active-monitor-speaker-80w-40w-rms-black-each-pair-j5a-j-5a","title":"FBT J 5A Processed Active Monitor Speaker 80W + 40W RMS - Black - Each \/ Pair ( J5A \/ J-5A )","description":"\u003cp\u003eThe black \u003cstrong\u003eJ 5A Processed Active Monitor\u003c\/strong\u003e from \u003cstrong\u003eFBT\u003c\/strong\u003e is a two-way 5\" 80W+40W RMS professional speaker with a 1\" neodymium silk dome tweeter. It can be used in various environments for applications such as theater, clubs, gyms, bars, and more. It features a frequency response of 80 Hz to 20 kHz and is designed with an on-board analog signal processor and limiter to protect the monitor from overloads during performance.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe built-in class D amplifier for the J 5A uses 80W RMS for the low frequency driver and 40W RMS for the 1\" high frequency driver. The 2-way bass-reflex speaker is built with two M6 suspension points for attaching to a wall. An AC power cord is included.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFeatures a 5\" (130mm) woofer with improved efficiency and linearity with a 1\" (25mm) neodymium silk dome tweeter\u003c\/p\u003e\u003cp\u003eLow noise toroidal transformer power supply\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899454402816,"sku":"J5ABK-Each","price":2800.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899454435584,"sku":"J5ABK-Pair","price":5600.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j5t-5-inch-passive-speaker-50w-16-ohms-or-100v-line-black-each-pair-j-5t-j-5t","title":"FBT J5T 5 Inch Passive Speaker, 50W @ 16 Ohms Or 100V Line - Black - Each \/ Pair ( J-5T \/ J 5T )","description":"\u003cp\u003eSound Reinforcement MonitorThe FBT J5T series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J5T series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J5T speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor. The FBT J5 is of two way design incorporating an 5\" low frequency woofer and 1\" HF custom compression driver.Cabinet dispersion is 90?H x 90?V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 3.5kHz.With a frequency range of 90Hz - 20kHz the FBT J5T speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 114dB. A front face steel grille protects the speaker from external damage.Ideal for fixed installations where numerous speakers are required, the FBT J5T have a switchable 70V\/100V transformer with selectable power taps at 50W, 25W, 12.5W, 3W, by the means of a 4 position rotary switch on the rear of the speaker cabinet. The two M6 fly points built into the cabinets along with the optional mounting brackets allow the FBT J5T speakers to be surface mounted on walls or ceiling. For portable or fixed use the FBT J5T speakers can be mounted on mic stands by using the optional adapters for vertical mounting.Rear panel connections feature push pin terminal strips for bare wire connection.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eKEY FEATURES\u003cbr\u003e2-way passive sound reinforcement system\u003cbr\u003ePolypropylene enclosure\u003cbr\u003e1 x 5\" custom woofer\u003cbr\u003e1 x 1\" neodymium silk dome tweeter\u003cbr\u003e50W (70\/100V) RMS recommended amplifier\u003cbr\u003e25W long term power\u003cbr\u003e100W short term power IEC 268-5\u003cbr\u003e2 x M6 suspension points\u003cbr\u003eInternal passive crossover filter\u003cbr\u003eInput panel with jack and terminal connector\u003cbr\u003eAvailable in white colour\u003cbr\u003eCompletely manufactured in Italy\u003cbr\u003e80 Hz @ 24dB\/Oct recommended High pass filter\u003cbr\u003eAPPLICATION\u003cbr\u003eHouses of Worship\u003cbr\u003eSchool \u0026amp; corporate audio visual sound reinforcement\u003cbr\u003eBackground music announcement: restaurants, pubs\u003cbr\u003eTransportation terminals\u003cbr\u003eClubs\u003cbr\u003eAuditoriums\u003cbr\u003eTheatres\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003cbr\u003eConfiguration:2 Way\u003cbr\u003eFrequency response:90Hz - 20kHz\u003cbr\u003eLow frequency woofer:5\" with 1\" VC\u003cbr\u003eHigh frequency driver:1\" Dome Tweeter\u003cbr\u003eMaximum SPL cont\/peak:111dB \/ 114dB SPL\u003cbr\u003eDispersion:90 x 90 (HxV)\u003cbr\u003eInput impedance:16 Ohm\u003cbr\u003eCrossover frequency:3.5kHz\u003cbr\u003eInput connector:Push terminal connectors\u003cbr\u003eNet Dimension (WxHxD):170 x 275 x 180mm \/ 6.69 x 10.82 x 7.08in\u003cbr\u003eNet Weight:3.4kg \/ 7.49lb\u003cbr\u003eTransport Dimension (WxHxD):240 x 345 x 235mm \/ 9.44 x 13.58 x 9.25in\u003cbr\u003eTransport Weight:4.2kg \/ 9.25lb\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899454468352,"sku":"J5TBK-Each","price":2000.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899454501120,"sku":"J5TBK-Pair","price":4000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j5t-5-inch-passive-speaker-50w-16-ohms-or-100v-line-white-each-pair-j-5t-j-5t","title":"FBT J5T 5 Inch Passive Speaker, 50W @ 16 Ohms Or 100V Line - White - Each \/ Pair ( J-5T \/ J 5T )","description":"\u003cp\u003eSound Reinforcement MonitorThe FBT J5T series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J5T series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. With the use of optional accessories the FBT J5T speakers can be mounted on mic stands for many nearfield monitor applications, live sound and as a studio monitor. The FBT J5 is of two way design incorporating an 5\" low frequency woofer and 1\" HF custom compression driver.Cabinet dispersion is 90?H x 90?V allowing for wide pattern coverage. The internal crossover is at a fixed frequency of 3.5kHz.With a frequency range of 90Hz - 20kHz the FBT J5T speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 114dB. A front face steel grille protects the speaker from external damage.Ideal for fixed installations where numerous speakers are required, the FBT J5T have a switchable 70V\/100V transformer with selectable power taps at 50W, 25W, 12.5W, 3W, by the means of a 4 position rotary switch on the rear of the speaker cabinet. The two M6 fly points built into the cabinets along with the optional mounting brackets allow the FBT J5T speakers to be surface mounted on walls or ceiling. For portable or fixed use the FBT J5T speakers can be mounted on mic stands by using the optional adapters for vertical mounting.Rear panel connections feature push pin terminal strips for bare wire connection.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eKEY FEATURES\u003cbr\u003e2-way passive sound reinforcement system\u003cbr\u003ePolypropylene enclosure\u003cbr\u003e1 x 5\" custom woofer\u003cbr\u003e1 x 1\" neodymium silk dome tweeter\u003cbr\u003e50W (70\/100V) RMS recommended amplifier\u003cbr\u003e25W long term power\u003cbr\u003e100W short term power IEC 268-5\u003cbr\u003e2 x M6 suspension points\u003cbr\u003eInternal passive crossover filter\u003cbr\u003eInput panel with jack and terminal connector\u003cbr\u003eAvailable in white colour\u003cbr\u003eCompletely manufactured in Italy\u003cbr\u003e80 Hz @ 24dB\/Oct recommended High pass filter\u003cbr\u003eAPPLICATION\u003cbr\u003eHouses of Worship\u003cbr\u003eSchool \u0026amp; corporate audio visual sound reinforcement\u003cbr\u003eBackground music announcement: restaurants, pubs\u003cbr\u003eTransportation terminals\u003cbr\u003eClubs\u003cbr\u003eAuditoriums\u003cbr\u003eTheatres\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003cbr\u003eConfiguration:2 Way\u003cbr\u003eFrequency response:90Hz - 20kHz\u003cbr\u003eLow frequency woofer:5\" with 1\" VC\u003cbr\u003eHigh frequency driver:1\" Dome Tweeter\u003cbr\u003eMaximum SPL cont\/peak:111dB \/ 114dB SPL\u003cbr\u003eDispersion:90 x 90 (HxV)\u003cbr\u003eInput impedance:16 Ohm\u003cbr\u003eCrossover frequency:3.5kHz\u003cbr\u003eInput connector:Push terminal connectors\u003cbr\u003eNet Dimension (WxHxD):170 x 275 x 180mm \/ 6.69 x 10.82 x 7.08in\u003cbr\u003eNet Weight:3.4kg \/ 7.49lb\u003cbr\u003eTransport Dimension (WxHxD):240 x 345 x 235mm \/ 9.44 x 13.58 x 9.25in\u003cbr\u003eTransport Weight:4.2kg \/ 9.25lb\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899455189248,"sku":"J5TWH-Each","price":2000.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899455222016,"sku":"J5TWH-Pair","price":4000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-118sa-18-2400w-powered-subwoofer-mitus-118sa-mitus118sa","title":"FBT MITUS 118SA 18\" 2400W Powered Subwoofer ( MITUS-118SA \/ MITUS118SA )","description":"\u003cp\u003eThe \u003cstrong\u003e\u003ca href=\"https:\/\/vbizz.com\/brand\/fbt\"\u003eFBT\u003c\/a\u003e \u003ca href=\"https:\/\/vbizz.com\/product\/fbt-mitus-118sa-powered-subwoofer-malaysia\"\u003eMITUS 118SA\u003c\/a\u003e\u003c\/strong\u003e, 18\" compact vented band-pass \u003ca href=\"https:\/\/vbizz.com\/category\/powered-speaker\"\u003e\u003cstrong\u003epowered speaker\u003c\/strong\u003e\u003c\/a\u003e is the perfect low-frequency extension for the MITUS range and the ideal companion for the FBT MITUS 206LA line array for ground stack applications with optional metal base.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThe FBT MITUS118SA shall meet the following performance criteria: Frequency response of 36Hz to 100Hz, Maximum SPL of 139dB peak,Class D amplifier 1200W RMS.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThe FBT MITUS 118SA provides a DSP with 8 presets-cardioid and infra configurations.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThe FBT MITUS 118SA feature 0.70\" Baltic birch plywood construction covered in a scratch resistant black paint with eight M10 fly points, M20 top-mounted stand adapter and two FBT design aluminium handles.\u003cbr\u003eThe control panel provides XLR in \u0026amp;link, volume control, preset, delay, phase 0°-180°, GND lift.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompact vented band pass subwoofer design enclosure\u003c\/li\u003e\n\u003cli\u003e460 mm (18’’) custom B\u0026amp;C neodymium magnet high excursion woofer with 75 mm (3’’) voice coil\u003c\/li\u003e\n\u003cli\u003eFrequency response from 36Hz to 100Hz\u003c\/li\u003e\n\u003cli\u003eClass D amplifier delivering 1200WRMS\u003c\/li\u003e\n\u003cli\u003eSwitch mode power supply\u003c\/li\u003e\n\u003cli\u003eDSP with 8 presets, cardioids and infra configurations, delay\u003c\/li\u003e\n\u003cli\u003eControl panel with XLR input and link, volume, presets, delay, phase 0°-180°, groundlift\u003c\/li\u003e\n\u003cli\u003e18 mm (3\/4’’) birch plywood enclosure, scratch resistant black paint\u003c\/li\u003e\n\u003cli\u003eEight M10 fly points, M20 top mount stand socket and two FBT design aluminum handles\u003c\/li\u003e\n\u003cli\u003eOptional 4 swivel-mount casters 80 mm (3.15’’) on request\u003c\/li\u003e\n\u003cli\u003ePerfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899455254784,"sku":"MITUS 118SA","price":21600.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-115a-15-1200w-powered-speaker-mitus-115a-mitus115a","title":"FBT MITUS 115A 15\" 1200W Powered Speaker ( MITUS-115A \/ MITUS115A )","description":"\u003cp\u003eThe MITUS sound reinforcement series is the result of FBT's experience and passion for excellence. A comprehensive range of 2-way speakers for FOH applications, subwoofers, stage monitor and line arrays in passive and bi-amplified designs.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWhether in live or touring applications or in permanent installations, they will be appreciated by any musicians and professionals looking for the finest sound quality.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe whole MITUS series is equipped with:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e-High quality B\u0026amp;C neodymium magnet woofers custom manufactured for FBT\u003c\/p\u003e\u003cp\u003e-The latest generation of B\u0026amp;C compression drivers\u003c\/p\u003e\u003cp\u003e-High efficiency class D power amp modules with switch mode power supplies fixed to a die-cast aluminum chassis\u003c\/p\u003e\u003cp\u003e-DSP with A\/D - D\/A low noise converters\u003c\/p\u003e\u003cp\u003e-Neutrik Powercon IN \u0026amp; LINK out power receptacles\u003c\/p\u003e\u003cp\u003e-Awide range of accessories makes the MITUS range extremely flexible for live or permanent installations\u003c\/p\u003e\u003cp\u003e-New aluminum die-cast carrying handles\u003c\/p\u003e\u003cp\u003e-Heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way, bi-amplified, bass-reflex design\u003c\/li\u003e\n\u003cli\u003e380 mm (15”) B\u0026amp;C neodymium magnet woofer with 75 mm (3”) voice coil\u003c\/li\u003e\n\u003cli\u003e25 mm (1”) exit B\u0026amp;C neodymium magnet HF driver with 44 mm (1.7’’) voice coil with 80°H x 50°V rotatable horn\u003c\/li\u003e\n\u003cli\u003eClass D built-in amplifiers, 600WRMS to the LF and 300WRMS to the HF, switch mode power supply\u003c\/li\u003e\n\u003cli\u003eFrequency response from 46Hz to 20KHz\u003c\/li\u003e\n\u003cli\u003eDSP with 8 eq presets\u003c\/li\u003e\n\u003cli\u003eControl panel with XLR input and link, volume, presets, HP-filter, ground-lift\u003c\/li\u003e\n\u003cli\u003e15 mm (5\/8”) birch plywood enclosure, scratch resistant black paint finish\u003c\/li\u003e\n\u003cli\u003eEight M10 fly points, 35 mm (1.38’’) speaker stand socket and two FBT design aluminium handles\u003c\/li\u003e\n\u003cli\u003eIdeal for live sound reinforcement applications as front of house main PA. Also suited for permanent installations\u003c\/li\u003e\n\u003cli\u003eVery lightweight, only 28Kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899455287552,"sku":"MITUS 115A","price":17000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-118s-18-1000w-passive-subwoofer-mitus-118s-mitus118s","title":"FBT MITUS 118S 18\" 1000W Passive Subwoofer ( MITUS-118S \/ MITUS118S )","description":"\u003cp\u003eThe \u003cstrong\u003e\u003ca href=\"https:\/\/vbizz.com\/brand\/fbt\"\u003eFBT\u003c\/a\u003e \u003ca href=\"https:\/\/vbizz.com\/product\/fbt-mitus-118s-passive-speaker-malaysia\"\u003eMITUS 118S\u003c\/a\u003e\u003c\/strong\u003e, 18\" compact vented band-pass \u003ca href=\"https:\/\/vbizz.com\/category\/passive-speaker\"\u003e\u003cstrong\u003epassive speaker\u003c\/strong\u003e\u003c\/a\u003e is the perfect low-frequency extension for the MITUS range and the ideal companion for the FBT MITUS 206L line array for ground stack applications with optional metal base. The FBT MITUS118S shall meet the following performance criteria: Frequency response of 36Hz to 200Hz,Frequency sensitivity of 101dB, Maximum SPL of 138dB peak, Recommended power amplifier 1000W RMS\/4 Ohm. The FBT MITUS 118S feature 0.70\" Baltic birch plywood construction covered in a scratch resistant black paint with a M20 top-mounted stand adapter and two FBT design aluminium handles. The rear facing input panel provides 2 Neutrik NL4 speakon female connectors.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e18mm \/ 0.70\" birch plywood enclosure\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier 1000W RMS\/4 Ohm\u003c\/li\u003e\n\u003cli\u003e460mm\/18\" custom B\u0026amp;C neodymium magnet with\u003c\/li\u003e\n\u003cli\u003e75mm\/3\" coil\u003c\/li\u003e\n\u003cli\u003eFrequency response 36Hz - 200Hz\u003c\/li\u003e\n\u003cli\u003eInput panel with Neutrik speakon NL-4MDV in \u0026amp; link connectors\u003c\/li\u003e\n\u003cli\u003eSPLcapability 138dB\u003c\/li\u003e\n\u003cli\u003e4 swivel mount casters 3.15\" on request\u003c\/li\u003e\n\u003cli\u003eExternal digital processor required\u003c\/li\u003e\n\u003cli\u003eCompletely Manufactured in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899455320320,"sku":"MITUS 118S","price":14000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-206l-2x6-5-1000w-passive-line-array-speaker-mitus-206l-mitus206l","title":"FBT MITUS 206L 2x6.5\" 1000W Passive Line Array Speaker ( MITUS-206L \/ MITUS206L )","description":"\u003cp\u003eThe \u003cstrong\u003e\u003ca href=\"https:\/\/vbizz.com\/brand\/fbt\"\u003eFBT\u003c\/a\u003e \u003ca href=\"https:\/\/vbizz.com\/product\/fbt-mitus-206l-passive-speaker-malaysia\"\u003eMITUS 206L\u003c\/a\u003e\u003c\/strong\u003e two-way compact line line array system shall incorporate 2 x 6.5” B\u0026amp;C neodymium woofers with1.7” voice coil and 1.4” exit B\u0026amp;C neodymium driver with 2.5” voice coil. The modularity of the this \u003ca href=\"https:\/\/vbizz.com\/category\/passive-speaker\"\u003e\u003cstrong\u003epassive speaker\u003c\/strong\u003e\u003c\/a\u003e makes it extremely flexible for a wide range of applications, from a small 2 cabinet P.A. system to an elaborate line array system consisting of up to 12 MITUS 206L cabinets along with multiple FBT MITUS 212FS subs for large concert events. The FBT MITUS 206L shall meet the following performance criteria: Frequency response of 75Hz to 20kHz,Frequency sensitivity of 97dB LF \/ 108dB HF, Maximum SPL of 129dB for LF and 133dB for HF, Recommended power amplifier 500W RMS\/16 Ohm LF and 150W RMS\/16 Ohm HF. The waveguide, optimized by BEM finite element simulation, offers 100° horizontal dispersion; engineered to be perfectly integrated with the HF compression driver it allows the dispersion of a flat acoustic wave to over 18kHz. The system shall not include an internal passive crossover. The front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers. Input connectors shall be parallel wired Neutrik NL4 speakon. Polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0° to 10° angle betwee cabinets at 2° step for flying and ground stacked configurations\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePermanent installations in: Theatres, Concert Halls, Clubs, Places of Worship, Conference Rooms, Indoor Sports, Arenas \u0026amp; Stadiums\u003c\/li\u003e\n\u003cli\u003eSound reinforcement for live events: Touring, Bands, Orchestras\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh impact polypropylene gas-injected enclosure\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier 500W RMS\/16 Ohm LF and 150W RMS\/16 Ohm HF\u003c\/li\u003e\n\u003cli\u003e2 x 6.5” B\u0026amp;C neodymium woofers with 1.7\" coil\u003c\/li\u003e\n\u003cli\u003e1.4\" exit B\u0026amp;C neodymium driver with 2.5\"coil\u003c\/li\u003e\n\u003cli\u003e100° horizontal waveguide\u003c\/li\u003e\n\u003cli\u003eInput panel with 2 x Neutrik speakon NL-4MDV in \u0026amp; link\u003c\/li\u003e\n\u003cli\u003eSPLcapability: 129dB LF \/ 133dB HF\u003c\/li\u003e\n\u003cli\u003eWide range of hardware accessories for flying and ground stacked configurations\u003c\/li\u003e\n\u003cli\u003eCompletely Manufactured in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899455353088,"sku":"MITUS 206L","price":13000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-210m-10-1600w-passive-floor-monitor-speaker-mitus-210m-mitus210m","title":"FBT MITUS 210M 10\" 1600W Passive Floor Monitor Speaker ( MITUS-210M \/ MITUS210M )","description":"\u003cp\u003eThe \u003cstrong\u003e\u003ca href=\"https:\/\/vbizz.com\/brand\/fbt\"\u003eFBT\u003c\/a\u003e \u003ca href=\"https:\/\/vbizz.com\/product\/fbt-mitus-210m-passive-floor-monitor-speaker-malaysia\"\u003eMITUS 210M\u003c\/a\u003e\u003c\/strong\u003e two-way \u003ca href=\"https:\/\/vbizz.com\/category\/passive-speaker\"\u003e\u003cstrong\u003epassive speaker\u003c\/strong\u003e\u003c\/a\u003e shall incorporate 1 x 10” B\u0026amp;C custom neodymium magnet coaxial speaker  with2.5” voice coil  and 1.4” exit titanium compression driver  with 2.5” voice coil (70° conical dispersion); B\u0026amp;C custom 10\" neodymium magnet woofer with 2.5\" voice coil. The FBT MITUS 210M shall meet the following performance criteria: Frequency response of 65Hz to 20kHz, Frequency sensitivity of 100dB , Maximum SPL of 132dB, Recommended power amplifier 800W RMS\/8 Ohm. Hi-grade passive internal crossover featuring «soft-trip» circuitry protection of low frequencies and high frequencies. The front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers and a rugged touring grade scratch resistant black paint finish protects the cabinet exterior.  Input connectors shall be parallel wired Neutrik NL4 speakon. The FBT MITUS 210M feature 5\/8\" birch plywood construction and a 1.38\"  stand socket allows the FBT MITUS 210M to be mounted on speaker stand.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLive sound reinforcement floor monitor\u003c\/li\u003e\n\u003cli\u003eTouring systems, Clubs, Auditoriums, Theatres\u003c\/li\u003e\n\u003cli\u003eHouses of worship, D.J. booth monitor\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way bass reflex design with coaxial driver\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier 800W RMS \/ 8Ohm\u003c\/li\u003e\n\u003cli\u003e1 x 10\" B\u0026amp;C custom neodymium magnet coaxial speaker with 2.5\" voice coil\u003c\/li\u003e\n\u003cli\u003e1.4\" exit titanium compression driver with 2.5\" voice coil\u003c\/li\u003e\n\u003cli\u003eB\u0026amp;C custom 10\" neodymium magnet woofer with 2.5 voice coil\u003c\/li\u003e\n\u003cli\u003e70° conical dispersion\u003c\/li\u003e\n\u003cli\u003eInput panel with 2 x Neutrik speakon NL-4MDV in \u0026amp; link\u003c\/li\u003e\n\u003cli\u003eSPL capability 132dB\u003c\/li\u003e\n\u003cli\u003e5\/8\" birch plywood enclosure\u003c\/li\u003e\n\u003cli\u003e1.38\" stand socket\u003c\/li\u003e\n\u003cli\u003eCompletely Manufactured in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899455385856,"sku":"MITUS 210M","price":12000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-206la-2x6-5-1200w-powered-line-array-speaker-mitus-206la-mitus206la","title":"FBT MITUS 206LA 2x6.5\" 1200W Powered Line Array Speaker ( MITUS-206LA \/ MITUS206LA )","description":"\u003cp\u003eThe \u003cstrong\u003e\u003ca href=\"https:\/\/vbizz.com\/brand\/fbt\"\u003eFBT\u003c\/a\u003e \u003ca href=\"https:\/\/vbizz.com\/product\/fbt-mitus-206la-powered-speaker-malaysia\"\u003eMITUS 206LA\u003c\/a\u003e\u003c\/strong\u003e is a two-way design incorporating 2 x 6.5” B\u0026amp;C neodymium woofers with1.7” voice coil and 1.4” exit B\u0026amp;C neodymium driver with 2.5” voice coil. The modularity of this \u003ca href=\"https:\/\/vbizz.com\/category\/powered-speaker\"\u003e\u003cstrong\u003epowered speaker\u003c\/strong\u003e\u003c\/a\u003e makes it extremely flexible for a wide range of applications, from a small 2 cabinet P.A. system to an elaborate line array system consisting of up to 12 MITUS 206LA cabinets along with multiple FBT MITUS 212FSA subs for large concert events.\u003cbr\u003e\u003cbr\u003eThe FBT MITUS 206LA shall meet the following performance criteria: Frequency response of 68Hz to 20kHz, Maximum SPLof 134dB, class D amplifier module that provides 600W RMS to the LF and 300W RMS to the HF. The waveguide, optimized by BEM finite element simulation, offers 100° horizontal dispersion; engineered to be perfectly integrated with the HF compression driver it allows the dispersion of a flat acoustic wave to over 18kHz.\u003cbr\u003e\u003cbr\u003eThe MITUS 206LA cabinets coupling hardware is internally integrated and allows the suspension of 12 arrays with a 10:1 safety factor. The front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers. The FBT MITUS 206LA provides a wide range of hardware accessories for flying and ground stacked configurations.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCompact 2-way, bi-amplified bass-reflex design\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 x 6.5'' (165 mm) B\u0026amp;C neodymium woofers with 1.7'' (44 mm) coil\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.4'' (36 mm) exit B\u0026amp;C neodymium driver with 2.5'' (64 mm) coil\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003eFrequency response from 68Hz to 20KHz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003eLatest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003eDSP on-board with 8 presets, +\/- 5db HF level control for accurate amplitude shading\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003eControl panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003e100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003eHigh impact polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0° to 10° angle between cabinets at 2° step\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003eIdeal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line array, the MITUS 206LA maybe used also in outdoor applications where the system is not directly exposed to the elements\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003eWide range of hardware accessories for flying and ground stacked configurations\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003eVery lightweight, only 14Kg\u003c\/li\u003e\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899455418624,"sku":"MITUS 206LA","price":16000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-210ma-10-1200w-powered-floor-monitor-speaker-mitus-210ma-mitus210ma","title":"FBT MITUS 210MA 10\" 1200W Powered Floor Monitor Speaker ( MITUS-210MA \/ MITUS210MA )","description":"\u003cp\u003eThe \u003cstrong\u003e\u003ca href=\"https:\/\/vbizz.com\/brand\/fbt\"\u003eFBT\u003c\/a\u003e \u003ca href=\"https:\/\/vbizz.com\/product\/fbt-mitus-210ma-powered-speaker-malaysia\"\u003eMITUS 210MA\u003c\/a\u003e\u003c\/strong\u003e bi-amplified \u003ca href=\"https:\/\/vbizz.com\/category\/powered-speaker\"\u003e\u003cstrong\u003epowered speaker\u003c\/strong\u003e\u003c\/a\u003e is made of 0.59\" birch plywood; the front is protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers, and the cabinet exterior is protected by a rugged touring grade scratch resistant black paint finish.\u003c\/p\u003e\u003cp\u003eThe FBT MITUS 210MA is a two-way coaxial design with 2x 10\" B\u0026amp;C unique neodymium magnet coaxial speakers with 2.5\" voice coils, a class D built-in amplifier with 600W RMS to the LF and 300W RMS to the HF, and a switch mode power supply.\u003c\/p\u003e\u003cp\u003eThe FBT MITUS 210MA features an 8-selectable preset DSP with A\/D-D\/A low noise converters.\u003cbr\u003eThe FBT MITUS 210MA must meet the following requirements: 60Hz to 20kHz frequency response, 132dB maximum SPL, 8 Ohm LF \/ 8 Ohm HF nominal impedance XLR «in\u0026amp;link», volume, preset, HP filter, and GND raise switch are all available on the control panel.\u003cbr\u003eThe FBT MITUS 210MA can be mounted on a speaker stand using a standard 1.38\" speaker stand socket.\u003c\/p\u003e\u003cp\u003eKEY FEATURES\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way bi-amplified, bass-reflex design with coaxial driver\u003c\/li\u003e\n\u003cli\u003e2 x 250 mm (2 x 10’’) B\u0026amp;C custom neodymium magnet speakers with 64 mm (2.5’’) voice coil, one of them is coaxial with 36 mm (1.4’’) exit titanium compression driver  and  64 mm (2.5’’) voice coil\u003c\/li\u003e\n\u003cli\u003eFrequency response from 60Hz to 20KHz\u003c\/li\u003e\n\u003cli\u003eClass D built-in amplifiers, 600WRMS to the LF and 300WRMS to the HF with switch mode power supply\u003c\/li\u003e\n\u003cli\u003eDSP with 8 eq presets\u003c\/li\u003e\n\u003cli\u003eControl panel with XLR input and link, volume, presets, HP-filter, ground-lift\u003c\/li\u003e\n\u003cli\u003e70° conical dispersion\u003c\/li\u003e\n\u003cli\u003e15 mm (5\/8”) birch plywood enclosure, scratch resistant black paint finish\u003c\/li\u003e\n\u003cli\u003e35 mm (1.38’’) stand socket and back side carrying handle\u003c\/li\u003e\n\u003cli\u003eIdeal for live sound stage monitoring applications, as well as a front of house main PA speaker\u003c\/li\u003e\n\u003cli\u003eVery lightweight, only 19Kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899455451392,"sku":"MITUS 210MA","price":17000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-212fsa-2x12-2400w-powered-line-array-subwoofer-mitus-212fsa-mitus212fsa","title":"FBT MITUS 212FSA 2x12\" 2400W Powered Line Array Subwoofer ( MITUS-212FSA \/ MITUS212FSA )","description":"\u003cp\u003eThe \u003cstrong\u003e\u003ca href=\"https:\/\/vbizz.com\/brand\/fbt\"\u003eFBT\u003c\/a\u003e \u003ca href=\"https:\/\/vbizz.com\/product\/fbt-mitus-212fsa-2x12-powered-line-array-subwoofer-malaysia\"\u003eMITUS 212FS\u003c\/a\u003e\u003c\/strong\u003e is a 2 x 12\" compact and flyable \u003ca href=\"https:\/\/vbizz.com\/category\/powered-speaker\"\u003e\u003cstrong\u003epowered speaker\u003c\/strong\u003e\u003c\/a\u003e which can extend the low frequencies of the MITUS 206L when combined together in ground-stacked or flying arrays.\u003c\/p\u003e\u003cp\u003eThe modularity of the FBT MITUS 212FS makes it extremely flexible for a wide range of applications, from a small system to an elaborate line array system consisting of up to 12 MITUS 206L cabinets along with multiple FBT MITUS 212FS subs for large concert events.\u003c\/p\u003e\u003cp\u003eThe FBT MITUS 212FS shall meet the following performance criteria: Frequency response of 50Hz to 250Hz,Frequency sensitivity of 99dB, Maximum SPL of 134dB continuous and 138dB peak, Recommended power amplifier 1000W RMS\/8 Ohm. The MITUS 212FS feature Baltic birch plywood construction covered in a scratch resistant black paint with a M20 top-mounted stand adapter.\u003cbr\u003eInput connectors shall be parallel wired Neutrik NL4 speakon.\u003c\/p\u003e\u003cp\u003eKEY FEATURES\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePassive version, recommended amplifier of 1000Wrms \/ 8ohm\u003c\/li\u003e\n\u003cli\u003eCompact vented band pass subwoofer sharing the same width and hardware suspension of the MITUS 206L\u003c\/li\u003e\n\u003cli\u003e320 mm (2 x 12’’) B\u0026amp;C neodymium magnet high excursion subwoofers with 75 mm (3’’) voice coils\u003c\/li\u003e\n\u003cli\u003eFrequency Response from 50Hz to 120Hz\u003c\/li\u003e\n\u003cli\u003eNeutrik Speakon NL- 4MDV connectors IN \u0026amp; LINK OUT\u003c\/li\u003e\n\u003cli\u003eExternal digital processor requied\u003c\/li\u003e\n\u003cli\u003e15 mm (5\/8’’) birch plywood enclosure, scratch resistant black paint\u003c\/li\u003e\n\u003cli\u003eLow frequency extension cabinet for the MITUS 206L line array for flying or ground stacked configurations.\u003c\/li\u003e\n\u003cli\u003eM20 top mount stand socket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899455484160,"sku":"MITUS 212FSA","price":20000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-x-lite-110-10-passive-speaker-each-pair-xlite-110-xlite110","title":"FBT X-LITE 110 10\" Passive Speaker - Each \/ Pair ( XLITE 110 \/ XLITE110 )","description":"\u003cp\u003eThe FBT X-LITE 110 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBT X-LITE 110 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe asymmetrical shape of the FBT X-LITE 110 cabinet also allows use as a floor stage monitor. The FBT X-LITE 110 is two way design incorporating an 10\" low frequency woofer and 1\" HF compression driver coupled to a 90°H x 60°V constant directivity horn. With a frequency range of 65Hz - 20kHz the FBT X-LITE 110 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 124dB.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIdeal for small fixed installations the FBT X-LITE 110 speaker have an impedance of 8 Ohm and the internal crossover is at a fixed frequency of 2kHz. The control panel features 2 x NL4 Neutrik speakon. 4 x M10 rigging points built into the cabinet along with the optional mounting brackets allow the FBT X-LITE 110 speaker to be surface mounted on walls or ceilings. A standard 1,38\" speaker stand socket allows the FBT X-LITE 110 to be mounted on speaker stand. A front face steel grille protects the speaker from external damage. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eRECOMMENDED AMPLIFIER:350W RMS\u003c\/p\u003e\u003cp\u003eLONG TERM POWER:175W\u003c\/p\u003e\u003cp\u003eSHORT TERM POWER:700W\u003c\/p\u003e\u003cp\u003eNOMINAL IMPEDANCE:8Ohm\u003c\/p\u003e\u003cp\u003eFREQUENCY RESPONSE:65Hz - 20kHz\u003c\/p\u003e\u003cp\u003eLOW FREQUENCY WOOFER:10 - 2.5 coil inch\u003c\/p\u003e\u003cp\u003eHIGH FREQUENCY DRIVER:1 - 1.4 coil inch\u003c\/p\u003e\u003cp\u003eSENSITIVITY (@1W\/1M):96dB\u003c\/p\u003e\u003cp\u003eMAXIMUM SPL CONT\/PEAK:121 \/ 124dB\u003c\/p\u003e\u003cp\u003eDISPERSION:90° x 60° HxV\u003c\/p\u003e\u003cp\u003eCROSSOVER FREQUENCY:2kHz\u003c\/p\u003e\u003cp\u003eRECOMMENDED HP FILTER:HP 55Hz - 12\/24 dB oct.\u003c\/p\u003e\u003cp\u003eRECOMMENDED EXTERNAL FILTER:FBT DSP Processor\u003c\/p\u003e\u003cp\u003eINPUT CONNECTOR:2 x Speakon\u003c\/p\u003e\u003cp\u003eNET DIMENSION (WXHXD):300 x 536 x 301,5 mm \/ 11,81 x 21,10 x 11,87 inch\u003c\/p\u003e\u003cp\u003eNET WEIGHT:14,5 Kg \/ 31,96 Lb\u003c\/p\u003e","brand":"FBT","offers":[{"title":"XLITE 110 - Each","offer_id":48899455516928,"sku":"XLITE 110 - Each","price":2500.0,"currency_code":"MYR","in_stock":true},{"title":"XLITE 110 - Pair","offer_id":48899455549696,"sku":"XLITE 110 - Pair","price":5000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-218sa-processed-active-subwoofer-mitus-218sa-mitus218sa","title":"FBT Mitus 218SA Processed Active Subwoofer ( Mitus-218SA \/ Mitus218SA )","description":"\u003cp\u003eThe FBT Mitus 218SA Active Subwoofer is an Active 2x B\u0026amp;C 18 inch with 4 inch voice coil large vented bass-reflex subwoofer which is the perfect low-frequency extension for the MITUS range with built in amplification delivering 2000W RMS and a 145dB SPL.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe FBT MITUS 218SA shall meet the following performance criteria: Frequency response of 30Hz to 100Hz, Maximum SPL of 145dB peak,Class D amplifier 2000W RMS. The FBT MITUS 218SA provides a DSP with 6 presets-cardioid and infra configurations.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe FBT MITUS 218SA feature 0.70 inch Baltic birch plywood construction covered in a scratch resistant black paint with M20 top-mounted stand adapter and six FBT design aluminium handles. The control panel provides XLR in \u0026amp;link, volume control, preset, delay, phase 0°-180°, 3 status led indicators.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Large vented bass-reflex subwoofer\u003cbr\u003e- 2 x 460mm (18 inch) custom B\u0026amp;C high excursion subwoofers with 100mm (3.9 inch) coil\u003cbr\u003e- Frequency Response from 30Hz to 100Hz\u003cbr\u003e- Class D amplifiers delivering 2000Wrms with switch mode power supply\u003cbr\u003e- DSP with 6 EQ presets, cardioids and infra configurations, delay\u003cbr\u003e- 18mm (¾ inch) birch plywood enclosure, textured scratch resistant black paint\u003cbr\u003e- Six FBT design aluminum handles\u003cbr\u003e- Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base.\u003cbr\u003e- M20 top mount stand socket\u003cbr\u003e- Optional 4 swivel mount casters 100 mm (4 inch) on request\u003cbr\u003e- Control panel with XLR input and link, volume, presets, delay, phase 0°- 180°, groundlift\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899455582464,"sku":"Mitus 218SA","price":41600.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-212fs-2x12-1000w-passive-line-array-subwoofer-mitus-212fs-mitus212fs","title":"FBT MITUS 212FS 2x12\" 1000W Passive Line Array Subwoofer ( MITUS-212FS \/ MITUS212FS )","description":"\u003cp\u003eThe \u003cstrong\u003e\u003ca href=\"https:\/\/vbizz.com\/brand\/fbt\"\u003eFBT\u003c\/a\u003e \u003ca href=\"https:\/\/vbizz.com\/product\/fbt-mitus-212fs-passive-line-array-subwoofer-malaysia\"\u003eMITUS 212FS\u003c\/a\u003e\u003c\/strong\u003e is a 2 x 12\" compact and flyable \u003ca href=\"https:\/\/vbizz.com\/category\/passive-speaker\"\u003e\u003cstrong\u003epassive speaker\u003c\/strong\u003e\u003c\/a\u003e which can extend the low frequencies of the MITUS 206L when combined together in ground-stacked or flying arrays.The modularity of the FBT MITUS 212FS makes it extremely flexible for a wide range of applications, from a small  system to an elaborate line array system consisting of up to 12 MITUS 206L cabinets along with multiple FBT MITUS 212FS subs for large concert events. The FBT MITUS 212FS shall meet the following performance criteria: Frequency response of 50Hz to 250Hz,Frequency sensitivity of 99dB, Maximum SPL of 134dB continuous and 138dB peak, Recommended power amplifier 1000W RMS\/8 Ohm. The MITUS 212FS feature Baltic birch plywood construction covered in a scratch resistant black paint with a M20 top-mounted stand adapter.  Input connectors shall be parallel wired Neutrik NL4 speakon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplication \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePermanent installations in: Theatres, Concert Halls, Clubs, Places of Worship, Conference Rooms, Indoor Sports, Arenas \u0026amp; Stadiums\u003c\/li\u003e\n\u003cli\u003eSound reinforcement for live events: Touring, Bands, Orchestras\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e15mm \/ 5.8\" birch plywood enclosure\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier 1000W RMS\/8 Ohm\u003c\/li\u003e\n\u003cli\u003e320mm\/2x12\" B\u0026amp;C neodymium magnet with 75mm\/3\" coil\u003c\/li\u003e\n\u003cli\u003eFrequency response 50Hz - 250Hz\u003c\/li\u003e\n\u003cli\u003eInput panel with Neutrik speakon NL-4MDV in \u0026amp; link connectors\u003c\/li\u003e\n\u003cli\u003eSPL capability 138dB\u003c\/li\u003e\n\u003cli\u003eWide range of hardware accessories for flying and ground stacked configurations\u003c\/li\u003e\n\u003cli\u003eExternal digital processor required\u003c\/li\u003e\n\u003cli\u003eCompletely Manufactured in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899455615232,"sku":"MITUS 212FS","price":17000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-x-lite-110a-10-active-loudspeaker-with-bluetooth-each-pair-xlite-110a-xlite110a","title":"FBT X LITE 110A 10\" Active Loudspeaker with Bluetooth - Each \/ Pair ( XLITE 110A \/ XLITE110A )","description":"\u003cp\u003eThe \u003cstrong\u003eFBT XLITE 110A\u003c\/strong\u003e series speakers with integrated 3-channel mixer feature lightweight, yet rugged gas-injected moulded polypropylene cabinet construction. Available in a black finish, the \u003cstrong\u003eFBT XLITE 110A\u003c\/strong\u003e series speakers provide fixed installations with an elegant design that blends into any decor.\u003cbr\u003e\u003cbr\u003eThe asymmetrical shape of the \u003cstrong\u003eFBT XLITE 110A\u003c\/strong\u003e cabinet also allows for use as a powered floor stage monitor.\u003cbr\u003e\u003cbr\u003eThe \u003cstrong\u003eFBT XLITE 110A\u003c\/strong\u003e is a two-way design incorporating a 10” low-frequency woofer and 1” HF compression driver coupled to a 90°H x 60°V constant directivity horn. With a frequency range of 58Hz - 20kHz the \u003cstrong\u003eFBT XLITE 110A\u003c\/strong\u003e speaker provides high-fidelity sound for speech and music applications with a maximum SPL of 127dB.\u003cbr\u003e\u003cbr\u003eThe bi-amplified FBT XLITE 110A active speaker features a 1200W low-frequency and 300W high-frequency amp. The control panel features a three-channel mixer with two micro-line inputs, stereo input and a dedicated channel for Bluetooth 5.0; two XLR inputs, stereo input, XLR output with ch1 or mix link selector, HP filter, two mic-line selectors, DSP preset selector, Bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the \u003cstrong\u003eFBT XLITE 110A\u003c\/strong\u003e speaker to be surface mounted on walls or ceilings.\u003cbr\u003e\u003cbr\u003eA standard 35mm speaker stand socket allows the \u003cstrong\u003eFBT XLITE 110A\u003c\/strong\u003e to be mounted on a speaker stand\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e\u003cbr\u003e2-way bi-amplified bass reflex system\u003cbr\u003ePolypropylene moulded enclosure\u003cbr\u003eCustom 10\" woofer (LF) \/ 2.5\" voice coil\u003cbr\u003e1\" throat \/ 1.4\" voice coil HF compression driver\u003cbr\u003e1200w \/ 300w Built-In amplifier (LF \/ HF)\u003cbr\u003eBluetooth 5.0\u003cbr\u003e3-Channel mixer\u003cbr\u003e4 DSP Presets\u003cbr\u003e30 degrees \u0026amp; 45 degrees monitor tapers\u003cbr\u003eUniversal switch mode power supply 100-240 VAC\u003cbr\u003eM10 rigging points\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eConfiguration: - 2 Way\u003c\/p\u003e\u003cp\u003eFrequency response: - 58Hz - 20KHz\u003c\/p\u003e\u003cp\u003eLow-frequency woofer: - 10\" - 2.5\" VC\u003c\/p\u003e\u003cp\u003eHigh-frequency driver: - 1\" - 1.4\" VC\u003c\/p\u003e\u003cp\u003eMaximum SPL cont\/peak: - 123\/127 dB\u003c\/p\u003e\u003cp\u003eDispersion: - 90 x 60\u003c\/p\u003e\u003cp\u003eInput impedance: - 22\u003c\/p\u003e\u003cp\u003eInput connector: - XLR IN\/OUT\u003c\/p\u003e\u003cp\u003eNet Dimension (WxHxD): - 300 x 536 x 301.5\u003c\/p\u003e\u003cp\u003eNet Weight: - 13 KG\u003c\/p\u003e\u003cp\u003eTransport Dimension (WxHxD): - 370 x 615 x 380\u003c\/p\u003e\u003cp\u003eTransport Weight: - 14.8 KG\u003c\/p\u003e\u003cp\u003eBuilt-in amplifier peak: - LF 1200w HF 300w\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899455648000,"sku":"XLITE 110A - Each","price":3800.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899455680768,"sku":"XLITE 110A - Pair","price":7600.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-x-lite-112-12-passive-speaker-each-pair-xlite-112-xlite112","title":"FBT X-LITE 112 12\" Passive Speaker - Each \/ Pair ( XLITE 112 \/ XLITE112 )","description":"\u003cp\u003eThe FBT X-LITE 112 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBT X-LITE 112 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.\u003c\/p\u003e\u003cp\u003eThe asymmetrical shape of the FBT X-LITE 112 cabinet also allows use as a floor stage monitor. The FBT X-LITE 112 is two way design incorporating an 12\" low frequency woofer and 1\" HF compression driver coupled to a 90°H x 60°V constant directivity horn. With a frequency range of 55Hz - 20kHz the FBT X-LITE 112 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 126.5dB.\u003c\/p\u003e\u003cp\u003eIdeal for small fixed installations the FBT X-LITE 112 speaker have an impedance of 8 Ohm and the internal crossover is at a fixed frequency of 1.8kHz. The control panel features 2 x NL4 Neutrik speakon. 4 x M10 rigging points built into the cabinet along with the optional mounting brackets allow the FBT X-LITE 112 speaker to be surface mounted on walls or ceilings. A standard 1,38\" speaker stand socket allows the FBT X-LITE 112 to be mounted on speaker stand. A front face steel grille protects the speaker from external damage. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eRECOMMENDED AMPLIFIER:400W RMS\u003c\/p\u003e\u003cp\u003eLONG TERM POWER:200W\u003c\/p\u003e\u003cp\u003eSHORT TERM POWER:800W\u003c\/p\u003e\u003cp\u003eNOMINAL IMPEDANCE:8Ohm\u003c\/p\u003e\u003cp\u003eFREQUENCY RESPONSE:55Hz - 20kHz\u003c\/p\u003e\u003cp\u003eLOW FREQUENCY WOOFER:12 - 2.5 coil inch\u003c\/p\u003e\u003cp\u003eHIGH FREQUENCY DRIVER:1 - 1.4 coil inch\u003c\/p\u003e\u003cp\u003eSENSITIVITY (@1W\/1M):97dB\u003c\/p\u003e\u003cp\u003eMAXIMUM SPL CONT\/PEAK:123.5 \/ 126.5dB\u003c\/p\u003e\u003cp\u003eDISPERSION:90° x 60° HxV\u003c\/p\u003e\u003cp\u003eCROSSOVER FREQUENCY:1.8kHz\u003c\/p\u003e\u003cp\u003eRECOMMENDED HP FILTER:HP 45Hz - 12\/24dB oct.\u003c\/p\u003e\u003cp\u003eRECOMMENDED EXTERNAL FILTER:FBT DSP Processor\u003c\/p\u003e\u003cp\u003eINPUT CONNECTOR:2 x Speakon\u003c\/p\u003e\u003cp\u003eNET DIMENSION (WXHXD):356 x 619 x 357 mm \/ 14,01 x 24,37 x 14,05 inch\u003c\/p\u003e\u003cp\u003eNET WEIGHT:16.4 Kg \/ 36.15 Lb\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899455713536,"sku":"XLITE 112 - Each","price":3000.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899455746304,"sku":"XLITE 112 - Pair","price":6000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-x-lite-112a-12-active-loudspeaker-with-bluetooth-each-pair-xlite-112a-xlite112a","title":"FBT X LITE 112A 12\" Active Loudspeaker with Bluetooth - Each \/ Pair ( XLITE 112A \/ XLITE112A )","description":"\u003cp\u003eThe\u003cstrong\u003e FBT XLITE 112A\u003c\/strong\u003e series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish, the FBT XLITE 112A series speakers provide fixed installations with an elegant design that blends into any decor. \u003c\/p\u003e\u003cp\u003eThe asymmetrical shape of the FBT XLITE 112A cabinet also allows use as a powered floor stage monitor. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe FBT XLITE 112A is two way design incorporating a \u003cstrong\u003e12” low frequency woofer and 1” HF compression driver \u003c\/strong\u003ecoupled to a 90°H x 60°V constant directivity horn. With a frequency range of 50Hz - 20kHz the FBT XLITE 112A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. \u003c\/p\u003e\u003cp\u003e The bi-amplified FBT XLITE 112A active speaker feature a 1200W low frequency amp and a 300W high frequency amp. \u003c\/p\u003e\u003cp\u003eThe control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two xlr inputs, stereo input, xlr output with ch1 or mix link selector, hp filter, two mic-line selectors, dsp preset selector, bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XLITE 112A speaker to be surface mounted on walls or ceilings. \u003c\/p\u003e\u003cp\u003eA standard 1.38” speaker stand socket allows the FBT XLITE 112A to be mounted on speaker stand.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2-way bi-amplified system in bass reflex \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003ePolypropylene molded enclosure \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWoofer custom 12” (LF) \/ 2,5” voice coil \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e1” throat \/ 1,4” voice coil HF compression driver \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1200\/300W built-in amplifier (LF\/HF)\u003c\/strong\u003e \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBluetooth 5.0 \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e3-channels mixer \u003c\/li\u003e\n\u003cli\u003e4 DSP presets \u003c\/li\u003e\n\u003cli\u003e30° \/ 45° monitor taper \u003c\/li\u003e\n\u003cli\u003eUniversal switching mode power supply 100-240 VAC \u003c\/li\u003e\n\u003cli\u003eM10 rigging points \u003c\/li\u003e\n\u003cli\u003e4 DSP presets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899455779072,"sku":"XLITE 112A - Each","price":4700.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899455811840,"sku":"XLITE 112A - Pair","price":9400.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-j15a-2-way-active-speaker-350w-100w-rms-each-pair-j-15a-j-15a","title":"FBT J15A, 2-Way Active Speaker, 350W +100W RMS - Each \/ Pair ( J 15A \/ J-15A )","description":"\u003cp\u003eThe FBT J15A series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBTJ15Aseries speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe asymmetrical shape of the FBTJ15Acabinet also allows use as a powered floor stage monitor. The FBTJ15Ais of two way design incorporating an 15\" low frequency woofer and 2\" HF custom compression driver coupled to a 90°H x 60°V horn. The active internal crossover is at a fixed frequency of 1.8kHz. With a frequency range of 48Hz - 20kHz the FBT J15A speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. A front face steel grille protects the speaker from external damage.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eCharacteristics\u003c\/h3\u003e\u003cp\u003e- Equipped with: 15 \" and 1\" speakers\u003c\/p\u003e\u003cp\u003e- Bi-amped switched-mode power supply amplifier with 350 W LF + 100 W HF RMS Class D\u003c\/p\u003e\u003cp\u003e- 48-20000 Hz\u003c\/p\u003e\u003cp\u003e- 90° x 60°\u003c\/p\u003e\u003cp\u003e- Integrated DSP with 4 switchable EQ presets\u003c\/p\u003e\u003cp\u003e- Slanted monitor angle\u003c\/p\u003e\u003cp\u003e- XLR in\/out\u003c\/p\u003e\u003cp\u003e- Volume controls\u003c\/p\u003e\u003cp\u003e- 2x M10 rigging points\u003c\/p\u003e\u003cp\u003e- 35 mm Stand flange mount\u003c\/p\u003e\u003cp\u003e- Dimensions: 410 x 663 x 387 mm\u003c\/p\u003e\u003cp\u003e- Weight: 14 kg\u003c\/p\u003e\u003cp\u003e- Black plastic housing\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cp\u003e- Multifunctional Housing: Yes\u003c\/p\u003e\u003cp\u003e- Pole Mount: Yes\u003c\/p\u003e\u003cp\u003e- Flyable: Yes\u003c\/p\u003e\u003cp\u003e- Woofer size: 1x 15\"\u003c\/p\u003e\u003cp\u003e- Tweeter, 1\" and Larger: Yes\u003c\/p\u003e\u003cp\u003e- Weight in kg: 14,0 kg\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899455844608,"sku":"J15A-Each","price":6600.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899455877376,"sku":"J15A-Pair","price":13200.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-112-12-1200w-passive-speaker-mitus-112-mitus112","title":"FBT MITUS 112 12\" 1200W Passive Speaker ( MITUS-112 \/ MITUS112 )","description":"\u003cp\u003eThe \u003cstrong\u003e\u003ca href=\"https:\/\/vbizz.com\/brand\/fbt\"\u003eFBT\u003c\/a\u003e \u003ca href=\"https:\/\/vbizz.com\/product\/fbt-mitus-112-passive-speaker-malaysia\"\u003eMITUS 112\u003c\/a\u003e\u003c\/strong\u003e two-way \u003ca href=\"https:\/\/vbizz.com\/category\/passive-speaker\"\u003e\u003cstrong\u003epassive speaker\u003c\/strong\u003e\u003c\/a\u003e shall incorporate 1 x 12” B\u0026amp;C neodymium woofer with3” voice coil and 1” exit B\u0026amp;C neodymium driver with 1.7” voice coil coupled to a rotatable 80° x 50° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 130°. The FBT MITUS 112 shall meet the following performance criteria: Frequency response of 55Hz to 18kHz, Frequency sensitivity of 99dB, Maximum SPL of 131dB, Recommended power amplifier 700W RMS \/ 8 Ohm. The FBT MITUS 112 passive speaker feature 0.59\" baltic birch plywood construction covered in a scratch \u0026amp; scuff resistant black finish; the front shall be protected by a heavy duty metal grille with antiresonance spacers and exclusive synthetic cloth to protect the drivers. The hi-grade passive internal crossover featuring «soft-trip» circuitry protection of the LF woofer and HF driver. Input connectors shall be parallel wired Neutrik NL4 speakon. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 112 speaker to be surface mounted on ceilings and a standard 1.38\" speaker stand socket allows the FBT MITUS 112 to be mounted on speaker stands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLive sound PAsystem or Live sound monitor, DJ system\u003c\/li\u003e\n\u003cli\u003eSchool and corporate audio visual sound reiforcement\u003c\/li\u003e\n\u003cli\u003eBackground music\/announcement: Restaurants, Pubs\u003c\/li\u003e\n\u003cli\u003eTransportation terminals, Clubs, Auditorium, Theatres\u003c\/li\u003e\n\u003cli\u003eGyms, Houses of worship \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e15mm \/ 5\/8\" baltic birch plywood cabinet\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier 700W RMS \/ 8 Ohm\u003c\/li\u003e\n\u003cli\u003e12\" B\u0026amp;C neodymium woofer with 3\" voice coil\u003c\/li\u003e\n\u003cli\u003e1\" exit B\u0026amp;C neodymium driver with 1.7\" voice coil\u003c\/li\u003e\n\u003cli\u003e80° H x 50° V rotatable horn\u003c\/li\u003e\n\u003cli\u003eInput panel with 2 x Neutrik speakon NL-4MDV in \u0026amp; link SPLcapability: 131dB\u003c\/li\u003e\n\u003cli\u003e12 x M10 fly points\u003c\/li\u003e\n\u003cli\u003eCompletely Manufactured in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899455910144,"sku":"MITUS 112","price":10000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-112a-2-way-12-processed-active-speaker-mitus-112a-mitus112a","title":"FBT MITUS 112A 2-Way 12\" Processed Active Speaker ( MITUS-112A \/ MITUS112A )","description":"\u003cp\u003eThe FBT MITUS 112A 12\" Processed Active Speaker has an XLR with link out input connector and 1.5 kHz crossover frequency.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eProcessed Active Speaker - 600W + 300W 133DB SPL\u003c\/p\u003e\u003cp\u003eThe FBT MITUS 112A is a two-way bi-amplified speaker system shall incorporate 1 x 12\" B\u0026amp;C neodymium woofer with 3\" voice coil and 1\" exit B\u0026amp;C neodymium driver with 1.7\" voice coil coupled to a rotatable 80° x 50° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 130°.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe FBT MITUS 112A shall meet the following performance criteria: Frequency response of 50Hz to 20kHz, Maximum SPL of 133dB, 600W RMS + 300W RMS class D amplifiers. It also provides a DSP with 8 EQ presets.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIt features 0.59\" baltic birch plywood construction covered in a scratch \u0026amp; scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.The control panel provides XLR input \u0026amp; link, level, preset, HPfilter and GND lift.\u003cbr\u003eThe 12 M10 anchoring points built into the cabinet allow the FBT MITUS 112A speaker to be surface mounted on ceilings and a standard 1.38\" speaker stand socket allows the FBT MITUS 112Ato be mounted on speaker stands.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way, bi-amplified, bass-reflex design\u003c\/li\u003e\n\u003cli\u003e320 mm (12'') B\u0026amp;C neodymium magnet woofer with 75 mm (3'') voice coil\u003c\/li\u003e\n\u003cli\u003e25 mm (1'') exit B\u0026amp;C neodymium magnet HF driver with 44 mm (1.7'') voice coil with 80°H x 50°V rotatable horn\u003c\/li\u003e\n\u003cli\u003eClass D amplifiers, 600WRMS to the LF and 300WRMS to the HF, switch mode power supply\u003c\/li\u003e\n\u003cli\u003eFrequency response from 50Hz to 20KHz\u003c\/li\u003e\n\u003cli\u003eDSP with 8 eq presets\u003c\/li\u003e\n\u003cli\u003eControl panel with XLR input and link, volume, presets, HPfilter, ground-lift\u003c\/li\u003e\n\u003cli\u003e15 mm (5\/8\") birch plywood enclosure, scratch resistant black paint finish\u003c\/li\u003e\n\u003cli\u003eEight M10 fly points, 35 mm (1.38'') speaker stand socket and two FBT design aluminium handles\u003c\/li\u003e\n\u003cli\u003eIdeal for live sound reinforcement applications as both front of house main PA, and as a stage monitor. Also suited for permanent installations\u003c\/li\u003e\n\u003cli\u003eVery lightweight, only 20Kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSpecifications\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConfiguration: 2 Way\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50Hz-20kHz\u003c\/li\u003e\n\u003cli\u003eLow frequency woofer: 12\" with 3\" VC\u003c\/li\u003e\n\u003cli\u003eHigh frequency driver: 1\" with 1.7\" VC\u003c\/li\u003e\n\u003cli\u003eMaximum SPL cont\/peak: 126\/133dB\u003c\/li\u003e\n\u003cli\u003eDispersion: 80 x 50 (HxV)\u003c\/li\u003e\n\u003cli\u003eInput impedance: 22kohm\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 1.5kHz\u003c\/li\u003e\n\u003cli\u003eInput connector: XLR with link out\u003c\/li\u003e\n\u003cli\u003eNet Dimension (WxHxD): 300 x 660 x 380mm\u003c\/li\u003e\n\u003cli\u003eNet Weight: 20kg\u003c\/li\u003e\n\u003cli\u003eTransport Dimension (WxHxD): 485 x 495 x 750mm\u003c\/li\u003e\n\u003cli\u003eTransport Weight: 22kg\u003c\/li\u003e\n\u003cli\u003eAC Power requirements: 640VA\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifier LF\/HF: 600\/300w RMS\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifier peak LF\/HF: 1200\/600W\u003c\/li\u003e\n\u003cli\u003ePower cord: 5m PowerCon\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899457515776,"sku":"MITUS 112A","price":15000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-x-lite-115-15-passive-speaker-each-pair-xlite-115-xlite115","title":"FBT X-LITE 115 15\" Passive Speaker - Each \/ Pair ( XLITE 115 \/ XLITE115 )","description":"\u003cp\u003eThe FBT X-LITE 115 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBT X-LITE 115 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe asymmetrical shape of the FBT X-LITE 115 cabinet also allows use as a floor stage monitor. The FBT X-LITE 115 is two way design incorporating an 15\" low frequency woofer and 1\" HF compression driver coupled to a 90°H x 60°V constant directivity horn. With a frequency range of 50Hz - 20kHz the FBT X-LITE 115 speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 127.5dB.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIdeal for small fixed installations the FBT X-LITE 115 speaker have an impedance of 8 Ohm and the internal crossover is at a fixed frequency of 1.6kHz. The control panel features 2 x NL4 Neutrik speakon. 4 x M10 rigging points built into the cabinet along with the optional mounting brackets allow the FBT X-LITE 115 speaker to be surface mounted on walls or ceilings. A standard 1,38\" speaker stand socket allows the FBT X-LITE 115 to be mounted on speaker stand. A front face steel grille protects the speaker from external damage. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp data-spm-anchor-id=\"a2o4k.pdp_revamp.product_detail.i2.78274e4fjtBYmn\"\u003eRECOMMENDED AMPLIFIER:400W RMS\u003c\/p\u003e\u003cp\u003eLONG TERM POWER:200W\u003c\/p\u003e\u003cp\u003eSHORT TERM POWER:800W\u003c\/p\u003e\u003cp\u003eNOMINAL IMPEDANCE:8Ohm\u003c\/p\u003e\u003cp\u003eFREQUENCY RESPONSE:50 Hz - 20kHz\u003c\/p\u003e\u003cp\u003eLOW FREQUENCY WOOFER:15 - 2.5 coil inch\u003c\/p\u003e\u003cp\u003eHIGH FREQUENCY DRIVER:1 - 1.4 coil inch\u003c\/p\u003e\u003cp\u003eSENSITIVITY (@1W\/1M):98dB\u003c\/p\u003e\u003cp\u003eMAXIMUM SPL CONT\/PEAK:124.5 \/ 127.5dB\u003c\/p\u003e\u003cp\u003eDISPERSION:90° x 60° HxV\u003c\/p\u003e\u003cp\u003eCROSSOVER FREQUENCY:1.6kHz\u003c\/p\u003e\u003cp\u003eRECOMMENDED HP FILTER:HP 40Hz - 12\/24dB oct.\u003c\/p\u003e\u003cp\u003eRECOMMENDED EXTERNAL FILTER:FBT DSP Processor\u003c\/p\u003e\u003cp\u003eINPUT CONNECTOR:2 x Speakon\u003c\/p\u003e\u003cp\u003eNET DIMENSION (WXHXD):433 x 706.5 x 400 mm \/ 17,04 x 27,81 x 15,74 inch\u003c\/p\u003e\u003cp\u003eNET WEIGHT:20.5 Kg \/ 45.19 Lb\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899457548544,"sku":"X LITE 115 - Each","price":3400.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899457581312,"sku":"X LITE 115 - Pair","price":6800.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-mitus-115-15-1400w-passive-speaker-mitus-115-mitus115","title":"FBT MITUS 115 15\" 1400W Passive Speaker ( MITUS-115 \/ MITUS115 )","description":"\u003cp\u003eThe\u003cstrong\u003e \u003ca href=\"https:\/\/vbizz.com\/brand\/fbt\"\u003eFBT\u003c\/a\u003e \u003ca href=\"https:\/\/vbizz.com\/product\/fbt-mitus-115-passive-speaker-malaysia\"\u003eMITUS 115\u003c\/a\u003e\u003c\/strong\u003e two-way \u003ca href=\"https:\/\/vbizz.com\/category\/passive-speaker\"\u003e\u003cstrong\u003epassive speaker\u003c\/strong\u003e\u003c\/a\u003e shall incorporate 1 x 15” B\u0026amp;C neodymium woofer with 3” voice coil and 1” exit B\u0026amp;C neodymium driver with 1.7” voice coil coupled to a rotatable 80° x 50° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 130°. The FBT MITUS 115 shall meet the following performance criteria: Frequency response of 50Hz to 18kHz, Frequency sensitivity of 100dB, Maximum SPL of 132dB, Recommended power amplifier 800W RMS \/ 8 Ohm. The FBT MITUS 115 passive speaker feature 0.59\" baltic birch plywood construction covered in a scratch \u0026amp; scuff resistant black finish; the front shall be protected by a heavy duty metal grille with antiresonance spacers and exclusive synthetic cloth to protect the drivers. The hi-grade passive internal crossover featuring «soft-trip» circuitry protection of the LF woofer and HF driver. Input connectors shall be parallel wired Neutrik NL4 speakon. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 115 speaker to be surface mounted on ceilings and a standard 1.38\" speaker stand socket allows the FBT MITUS 115 to be mounted on speaker stands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLive sound PA system or Live sound monitor, DJ system\u003c\/li\u003e\n\u003cli\u003eSchool and corporate audio visual sound reiforcement\u003c\/li\u003e\n\u003cli\u003eBackground music\/announcement: Restaurants, Pubs Transportation terminals, Clubs, Auditorium, Theatres Gyms, Houses of worship\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e15mm \/ 5\/8\" baltic birch plywood cabinet\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier 800W RMS \/ 8 Ohm\u003c\/li\u003e\n\u003cli\u003e15\" B\u0026amp;C neodymium woofer with 3\" voice coil\u003c\/li\u003e\n\u003cli\u003e1\" exit B\u0026amp;C neodymium driver with 1.7\" voice coil\u003c\/li\u003e\n\u003cli\u003e80° H x 50° V rotatable horn\u003c\/li\u003e\n\u003cli\u003eInput panel with 2 x Neutrik speakon NL-4MDV in \u0026amp; link\u003c\/li\u003e\n\u003cli\u003eSPL capability: 132dB\u003c\/li\u003e\n\u003cli\u003e12 x M10 fly points\u003c\/li\u003e\n\u003cli\u003eCompletely Manufactured in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899457614080,"sku":"MITUS 115","price":12000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-x-lite-115a-15-active-loudspeaker-with-bluetooth-each-pair-xlite-115a-xlite115a","title":"FBT X LITE 115A 15\" Active Loudspeaker with Bluetooth - Each \/ Pair ( XLITE 115A \/ XLITE115A )","description":"\u003cp data-mce-fragment=\"1\"\u003eThe \u003cstrong\u003eFBT X-LITE 115A\u003c\/strong\u003e is a two-way design incorporating a 15” low-frequency woofer and 1” HF compression driver coupled to a 90°H x 60°V constant directivity horn. With a frequency range of 42Hz - 20kHz the \u003cstrong\u003eFBT X-LITE 115A\u003c\/strong\u003e speaker provides high-fidelity sound for both speech and music applications with a maximum SPL of 130dB. The bi-amplified \u003cstrong\u003eFBT X-LITE 115A\u003c\/strong\u003e active speaker features a 1200W low-frequency and 300W high-frequency amp. The control panel features a three-channel mixer with two micro-line inputs, stereo input and a dedicated channel for Bluetooth 5.0; two XLR inputs, stereo input, XLR output with ch1 or mix link selector, hp filter, two mic-line selectors, DSP preset selector, Bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the \u003cstrong\u003eFBT X-LITE 115A\u003c\/strong\u003e speaker to be surface mounted on walls or ceilings.\u003cbr\u003e\u003cbr\u003eThe asymmetrical shape of the \u003cstrong\u003eFBT XLITE 115A\u003c\/strong\u003e cabinet also allows for use as a powered floor stage monitor.\u003cbr\u003e\u003cbr\u003eA standard 1.38” speaker stand socket allows the FBT X-LITE 115A to be mounted on the speaker stand.\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/h3\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e2-way bi-amplified system in a bass reflex\u003cbr\u003ePolypropylene moulded enclosure\u003cbr\u003eWoofer custom 15” (LF) \/ 2.5” voice coil\u003cbr\u003e1” throat \/ 1,4” voice coil HF compression driver\u003cbr\u003e1200\/300W built-in amplifier (LF\/HF)\u003cbr\u003eBluetooth 5.0\u003cbr\u003e3-channels mixer\u003cbr\u003e4 DSP presets\u003cbr\u003e30° or 45° monitor taper\u003cbr\u003eUniversal switching mode power supply 100-240Vac\u003cbr\u003eM10 rigging points\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eCONFIGURATION:2 way\u003c\/p\u003e\u003cp\u003eBUILT-IN AMPLIFIER LF\/HF:1200\/300 W\u003c\/p\u003e\u003cp\u003eFREQUENCY RESPONSE:42Hz - 20KHz\u003c\/p\u003e\u003cp\u003eLOW FREQUENCY WOOFER:15- 2.5 coil\u003c\/p\u003e\u003cp\u003eHIGH FREQUENCY DRIVER:1 - 1.4 coil\u003c\/p\u003e\u003cp\u003eMAXIMUM SPL CONT\/PEAK:125\/130 dB\u003c\/p\u003e\u003cp\u003eDISPERSION:90°x60°\u003c\/p\u003e\u003cp\u003eINPUT IMPEDANCE:22 kOhm\u003c\/p\u003e\u003cp\u003eINPUT CONNECTOR:XLR IN\/OUT, JACK ST\u003c\/p\u003e\u003cp\u003ePOWER CORD: 3 m\u003c\/p\u003e\u003cp\u003eNET DIMENSION (WXHXD):17,04 x 27,81 x 15,74 \/ 433 x 706,5 x 400\u003c\/p\u003e\u003cp\u003eWeight: 19.3 Kg\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899457646848,"sku":"X LITE 115A - Each","price":5500.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899457679616,"sku":"X LITE 115A - Pair","price":11000.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-x-pro-110a-1500w-active-speaker-with-bluetooth-each-pair-xpro-110a-xpro-110a","title":"FBT X-PRO 110A 1500W Active Speaker With Bluetooth - Each \/ Pair ( XPRO-110A \/ XPRO 110A )","description":"\u003cp\u003eThe FBT XPRO 110A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected molded Plywood cabinet construction. Available in black finish, the FBT XPRO 110A series speakers provide fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the FBT XPRO 110A cabinet also allows use as a powered floor stage monitor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThe FBT XPRO 110A is two way design incorporating a 10” low frequency woofer and 1” HF compression driver coupled to a 80°H x 50°V rotatable constant directivity horn. With a frequency range of 58Hz - 20kHz the FBT XPRO 110A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 127dB. The bi-amplified FBT XPRO 110A active speaker feature a 1200W low frequency amp and a 300W high frequency amp.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two xlr inputs, stereo input, xlr output with ch1 or mix link selector, hp filter, two mic-line selectors, dsp preset selector, bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XPRO 110A speaker to be surface mounted on walls or ceilings. A standard 1.38” speaker stand socket allows the FBT XPRO 110A to be mounted on speaker stand.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way bi-amplified system\u003c\/li\u003e\n\u003cli\u003ePlywood cabinet\u003c\/li\u003e\n\u003cli\u003eWoofer custom 10”LF \/ 2.5’’ voice coil\u003c\/li\u003e\n\u003cli\u003e1” throat \/ 1.4” voice coil HF compression driver\u003c\/li\u003e\n\u003cli\u003e1200\/300W built-in amplifier max (LF\/HF)\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0\u003c\/li\u003e\n\u003cli\u003e3 channels mixer\u003c\/li\u003e\n\u003cli\u003e35° monitor taper\u003c\/li\u003e\n\u003cli\u003e4 DSP presets\u003c\/li\u003e\n\u003cli\u003e80° H x 50° V rotatable constant directivity horn\u003c\/li\u003e\n\u003cli\u003eUniversal switching mode power supply 100-240 VAC\u003c\/li\u003e\n\u003cli\u003eM10 rigging points APPLICATIONS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899457712384,"sku":"X-PRO 110A - Each","price":4400.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899457745152,"sku":"X-PRO 110A - Pair","price":8800.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-x-pro-112a-1500w-active-speaker-with-bluetooth-each-pair-xpro-112a-xpro-112a","title":"FBT X-PRO 112A 1500W Active Speaker With Bluetooth - Each \/ Pair ( XPRO-112A \/ XPRO 112A )","description":"\u003cp\u003eThe FBT XPRO 112A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected molded plywood cabinet construction. Available in black finish, the FBT XPRO 112A series speakers provide fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the FBT XPRO 112A cabinet also allows use as a powered floor stage monitor. The FBT XPRO 112A is two way design incorporating a 12” low frequency woofer and 1” HF compression driver coupled to a 80°H x 50°V rotatable constant directivity horn. With a frequency range of 50Hz - 20kHz the FBT XPRO 112A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. The bi-amplified FBT XPRO 112A active speaker feature a 1200W low frequency amp and a 300W high frequency amp. The control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two xlr inputs, stereo input, xlr output with ch1 or mix link selector, hp filter, two mic-line selectors, dsp preset selector, bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XPRO 112A speaker to be surface mounted on walls or ceilings. A standard 1.38” speaker stand socket allows the FBT XPRO 112A to be mounted on speaker stand.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way bi-amplified system\u003c\/li\u003e\n\u003cli\u003ePlywood cabinet\u003c\/li\u003e\n\u003cli\u003eWoofer custom 12”LF \/ 2.5’’ voice coil\u003c\/li\u003e\n\u003cli\u003e1” throat \/ 1.4” voice coil HF compression driver\u003c\/li\u003e\n\u003cli\u003e1200\/300W built-in amplifier max (LF\/HF)\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0\u003c\/li\u003e\n\u003cli\u003e3 channels mixer\u003c\/li\u003e\n\u003cli\u003e35° monitor taper\u003c\/li\u003e\n\u003cli\u003e4 DSP presets\u003c\/li\u003e\n\u003cli\u003e80° H x 50° V rotatable constant directivity horn\u003c\/li\u003e\n\u003cli\u003eUniversal switching mode power supply 100-240 VAC\u003c\/li\u003e\n\u003cli\u003eM10 rigging points\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899457777920,"sku":"X-PRO 112A - Each","price":5300.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899457810688,"sku":"X-PRO 112A - Pair","price":10600.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-x-pro-112ma-powered-stage-monitor-xpro-112ma-xpro112ma","title":"FBT X-PRO 112MA Powered Stage Monitor ( XPRO 112MA \/ XPRO112MA )","description":"\u003cp\u003eExperience pristine on-stage monitoring with the FBT X-PRO 112MA Powered Stage Monitor. Equipped with a 12\" woofer, bi-amplification, and adjustable angle, it ensures exceptional sound projection for live performances. Elevate your stage sound with this versatile and powerful monitor.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-way bi-amplified bass-reflect design \u003c\/li\u003e\n\u003cli\u003eWoofer custom 12\" \/ 2.5’’ voice coil \u003c\/li\u003e\n\u003cli\u003e1\" throat \/ 1.4\" voice coil HF compression driver \u003c\/li\u003e\n\u003cli\u003e1200\/300W HF class D amplifier \u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 \u003c\/li\u003e\n\u003cli\u003e3 channels mixer \u003c\/li\u003e\n\u003cli\u003e4 DSP presets \u003c\/li\u003e\n\u003cli\u003eBox in plywood with anti-scratch treatment \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eConfiguration: 2 Way\u003c\/p\u003e\u003cp\u003eFrequency response: 54Hz - 20KHz\u003c\/p\u003e\u003cp\u003eLow frequency woofer: 12\"- 2.5\" coil\u003c\/p\u003e\u003cp\u003eHigh frequency driver: 1\" - 1.4\" coil\u003c\/p\u003e\u003cp\u003eMaximum SPL cont\/peak: 24\/129 dB\u003c\/p\u003e\u003cp\u003eDispersion: 80 Degrees\u003c\/p\u003e\u003cp\u003eInput impedance: 22 kOhm\u003c\/p\u003e\u003cp\u003eInput connector: XLR IN\/OUT JACK ST\u003c\/p\u003e\u003cp\u003eNet Dimension (WxHxD): 550 x 320 x 467\u003c\/p\u003e\u003cp\u003eNet Weight: 16 Kg\u003c\/p\u003e\u003cp\u003ePower cord: 5m\u003c\/p\u003e\u003cp\u003ePower Requirements: 500W\u003c\/p\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899457843456,"sku":"X-PRO 112MA","price":5600.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-x-pro-115a-1500w-active-speaker-with-bluetooth-each-pair-xpro-115a-xpro-115a","title":"FBT X-PRO 115A 1500W Active Speaker With Bluetooth - Each \/ Pair ( XPRO-115A \/ XPRO 115A )","description":"\u003cp\u003eElevate your audio with FBT X-PRO 115A Active Speaker. Featuring 1500W output, 15\" woofer, and Bluetooth connectivity, it delivers powerful sound for events and installations. Perfect for those seeking modern convenience and exceptional audio quality.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eFBT XPRO 115A\u003c\/strong\u003e series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected moulded plywood cabinet construction. Available in black finish, the FBT XPRO 115A series speakers provide fixed installations with an elegant design that blends into any decor. \u003c\/p\u003e\u003cp\u003eThe asymmetrical shape of the FBT XPRO 115A cabinet also allows use as a powered floor stage monitor. The FBT XPRO 115A is two way design incorporating a 15 low frequency woofer and 1 HF compression driver coupled to a 80°H x 50°V rotatable constant directivity horn. \u003cbr\u003e \u003c\/p\u003e\u003cp\u003eWith a frequency range of 42Hz - 20kHz the FBT XPRO 115A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 130dB. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe bi-amplified FBT XPRO 115A active speaker feature a 1200W low frequency amp and a 300W high frequency amp. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two xlr inputs, stereo input, xlr output with ch1 or mix link selector, hp filter, two mic-line selectors, dsp preset selector, bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XPRO 115A speaker to be surface mounted on walls or ceilings.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e A standard 35mm speaker stand socket allows the FBT XPRO 115A to be mounted on speaker stand.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2-way bi-amplified system in bass reflex \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003ePlywood cabinet \u003c\/li\u003e\n\u003cli\u003eWoofer custom \u003cstrong\u003e15” (LF) woofer \/ 2.5” voice coil \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e1” throat \/ 1,4” voice coil HF compression driver \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1200\/300W built-in amplifier max (LF\/HF) \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBluetooth 5.0 \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e3-channels mixer \u003c\/li\u003e\n\u003cli\u003e4 DSP presets \u003c\/li\u003e\n\u003cli\u003e80° H x 50° V rotatable constant directivity horn \u003c\/li\u003e\n\u003cli\u003e35° or 45° monitor taper \u003c\/li\u003e\n\u003cli\u003eUniversal switching mode power supply 100-240Vac \u003c\/li\u003e\n\u003cli\u003eM10 rigging points\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Each","offer_id":48899457876224,"sku":"X-PRO 115A - Each","price":6300.0,"currency_code":"MYR","in_stock":true},{"title":"Pair","offer_id":48899457908992,"sku":"X-PRO 115A - Pair","price":12600.0,"currency_code":"MYR","in_stock":true}]},{"product_id":"fbt-x-sub-118sa-processed-compact-bass-reflex-active-subwoofer-xsub118sa-xsub-118sa","title":"FBT X-SUB 118SA Processed Compact Bass Reflex Active Subwoofer ( XSUB118SA \/ XSUB 118SA )","description":"\u003cp\u003eThe FBT Audio X-SUB 18SA is a processed active subwoofer that is equipped with a massive 18-inch heavy-duty woofer. This subwoofer is controlled via a 1200w Class D amplifier and offers a frequency range of 38 – 120Hz which is perfect for bass-heavy music. This subwoofer is ideal for a broad range of applications that include mobile entertainers, schools, theatres, music venues, live events, festivals and large conference rooms.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe X-SUB 18SA also comes with a fully integrated Digital Signal Processor with four equalizations presets to choose from, this allows you to tailor the sound to your exact requirements and get the perfect sound for your audience. This subwoofer comes with a super-robust plywood cabinet that has been built to withstand the rigors of everyday on-stage use and has been finished with a classic Italian style to suit the most elegant fixed installation. Finally, this subwoofer is also fitted with M20 thread points for mounting to a pole on a 3-way system design.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFeatures\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eActive subwoofer\u003c\/li\u003e\n\u003cli\u003e18mm \/ 0,70\" birch plywood cabinet\u003c\/li\u003e\n\u003cli\u003e18\" woofer \/ 3\" voice coil\u003c\/li\u003e\n\u003cli\u003e1200W RMS Class D power amplifier\u003c\/li\u003e\n\u003cli\u003e4 DSP presets\u003c\/li\u003e\n\u003cli\u003eFrequency response 38Hz - 120Hz\u003c\/li\u003e\n\u003cli\u003eM20 top mount speaker stand socket Optional 100mm \/ 3,93\" transport wheels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FBT","offers":[{"title":"Default Title","offer_id":48899457941760,"sku":"X-SUB 118SA","price":10000.0,"currency_code":"MYR","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/7710\/0800\/collections\/Untitled-design-Photoroom.png?v=1782789884","url":"https:\/\/livemusic.com.my\/collections\/fbt.oembed","provider":"Live Music Malaysia","version":"1.0","type":"link"}